Analog Devices

AD622ARZ - 1-1000 Gain Instrumentation Amplifier | Analog Devices

Référence : AD622ARZ ✓ Actif
125 µV Vdss 8-SOIC Package
MOQ : 1 |

AD622ARZ Présentation

The Analog Devices AD622ARZ is a single-channel instrumentation amplifier with a gain range of 1 to 1000, a 1 MHz bandwidth, and an 8-SOIC package. It accepts supply voltages from ±18 V and provides a modestly accurate instrumentation-amplifier solution for differential sensor signals.

An instrumentation amplifier is a precision analog amplifier optimized for measuring small differential signals while rejecting large common-mode voltages. The AD622ARZ integrates a complete difference-amplifier system with precision-matched resistors, reducing the component count and board area required compared with a discrete two- or three-op-amp design.

The AD622 uses one external resistor to establish gains from 2 through 1000, while unity gain requires no external gain resistor. Its specified input offset voltage is 125 µV, and its 3 dB bandwidth reaches 1 MHz. These characteristics make it suitable for industrial sensor interfaces, bridge amplifiers, and current-measurement circuits operating within its ±18 V supply capability.

The device follows the traditional eight-pin instrumentation-amplifier pin configuration. Gain-setting resistors connect between the gain resistor pins, differential inputs enter the input pins, and the reference input supports output-voltage shifting. This architecture permits calibration and gain selection while maintaining a compact surface-mount implementation.

Typical applications include pressure and temperature transducer amplification, strain-gage bridge measurement, biomedical instrumentation, current sensing, and general differential signal conditioning. The 1 MHz bandwidth accommodates many industrial and instrumentation signals, while engineers should verify input common-mode range, output swing, supply limits, and gain accuracy against the application operating conditions.

For reliable layout, keep the gain resistor close to the device and provide solid grounding around the differential input path. Reference-pin capacitance can affect output stability, so the compensation method specified in the Analog Devices datasheet should be followed when a driven reference or nonzero reference voltage is required.

This product page combines the AD622ARZ gain, bandwidth, offset-voltage, package, and application details with drop-in candidates and practical guidance for evaluating instrumentation-amplifier replacements in existing eight-pin SOIC layouts.

Alternatives de remplacement direct pour AD622ARZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec AD622ARZ (même facteur de forme et même empreinte) — différant par Package, Input Type, Pin Count, Product Type.

Analog Devices
Input Type: Differential input
Comparer avec AD622ARZ →
Analog Devices
Package: 16-pin SOIC
Pin Count: 16 pins
Product Type: Monolithic current transmitter IC
Comparer avec AD622ARZ →

AD627ARZ

✅ Remplacement direct
📦 8-SOIC
Related 8-SOIC instrumentation amplifier; AD622ARZ has 1 MHz bandwidth and 125 µV input offset, while the AD627ARZ has a lower 800 kHz bandwidth and different gain and offset limits.

📋 Alternative de référence (hors catalogue)

AD628ARZ

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 8-SOIC
Same 8-SOIC footprint and instrumentation-amplifier function; AD622ARZ specifies 1 MHz bandwidth and 125 µV offset, while the AD628ARZ provides different bandwidth, gain, and precision limits.

📋 Alternative de référence (hors catalogue)

AD694AR

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 8-SOIC
Monolithic current transmitter IC · 4-20 mA · 0-20 mA · High-level voltage input · 10.000 V · +36 V · Single or dual supply · 1 amplifier

Contactez-nous pour le prix

Voir la fiche technique →

AD622ARZ Valeurs maximales et caractéristiques électriques

Product Type Single-channel instrumentation amplifier
Number of Channels 1 channel
Gain Range 1 to 1000
External-Resistor Gain Range 2 to 1000
3 dB Bandwidth 1 MHz
Input Offset Voltage 125 µV
Tension d'alimentation ±18 V
Total Supply Voltage 36 V
Type de sortie Single-ended
Input Type Differential
Gain Configuration One external gain resistor for gains of 2 to 1000; no external resistor for gain 1
Boîtier 8-SOIC
Nombre de broches 8 pins
Type de montage Surface mount
Reference Input Supported for output-voltage shifting
Statut RoHS Unknown
REACH Status Unknown

Configuration des broches de AD622ARZ

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Broche 1 RG — Gain-setting resistor connection
Broche 2 -IN — Inverting differential input
Broche 3 +IN — Noninverting differential input
Broche 4 V- — Negative supply connection
Broche 5 REF — Reference input for output-voltage shifting
Broche 6 OUT — Single-ended amplifier output
Broche 7 V+ — Positive supply connection
Broche 8 RG — Gain-setting resistor connection

Applications typiques

AD622ARZ convient pour 6 applications: Strain-Gage Bridge Measurement, Pressure Transducer Interface, Temperature Sensor Amplification, Medical and Bio-Signal Conditioning, Current-Shunt Measurement, Industrial Differential Signal Conditioning.

🏭

Strain-Gage Bridge Measurement

The AD622ARZ fits strain-gage bridge front ends because it amplifies the small differential bridge output while rejecting common-mode excitation voltage. Its gain can be set from 2 through 1000 with one external resistor, and the specified 125 µV input offset establishes a useful baseline for bridge measurement uncertainty. The 1 MHz bandwidth provides ample response for many static and moderately dynamic mechanical tests. Connect the bridge output differentially, keep the input traces short and paired, and verify that the bridge excitation and signal amplitudes remain within the amplifier's common-mode and output-swing limits.

🧩

Pressure Transducer Interface

The AD622ARZ is appropriate for resistive pressure and force transducers that produce a small differential signal over a substantial common-mode voltage. A selectable gain of up to 1000 improves use of the converter's input range, while the 125 µV offset must be included in the accuracy budget for low-pressure measurements. The 1 MHz bandwidth is more than adequate for many pressure-control loops and data-acquisition channels. Place the transducer interface close to the sensing element, maintain a grounded reference, and check supply headroom so the output does not clip.

💊

Temperature Sensor Amplification

The AD622ARZ can condition low-level outputs from resistance-based temperature sensors, thermistors, and RTD arrangements when differential excitation and sensing are used. Its 1-to-1000 gain range allows the design to compensate for different sensor sensitivities without changing the instrumentation-amplifier footprint. The 125 µV input offset should be compared with the expected millivolt-level signal, while the 1 MHz bandwidth leaves margin for electrical noise filtering ahead of an ADC. Use the reference input only with the compensation network specified in the Analog Devices datasheet.

💊

Medical and Bio-Signal Conditioning

The AD622ARZ can serve as a front-end amplifier for small differential bio-signal measurements when the design remains within the device's stated accuracy, bandwidth, and supply limits. Its differential inputs help reject common-mode interference, and gains from 1 to 1000 provide flexibility for millivolt-level sensor outputs. The specified 125 µV offset and 1 MHz bandwidth must be evaluated against the required signal bandwidth and safety margins. Maintain short protected input routes, use appropriate grounding and isolation methods, and avoid presenting the device as a complete medical safety solution.

⚡

Current-Shunt Measurement

The AD622ARZ is suitable for measuring the small differential voltage generated by a current shunt when common-mode voltage must be rejected. The 1-to-1000 gain range allows substantial amplification before conversion or comparison, and the 125 µV offset is an important error term when the shunt voltage is small. Its 1 MHz bandwidth supports measurement bandwidth above many static power-system applications. Keep the shunt and amplifier on the same ground reference, minimize trace area around the Kelvin sense connections, and verify output swing at the maximum expected current.

🏭

Industrial Differential Signal Conditioning

The AD622ARZ supports industrial measurement systems that combine a differential sensor with a single-ended analog input. Its complete difference-amplifier architecture reduces the need for several discrete precision op amps, while the 8-SOIC package simplifies board assembly. The 1 MHz bandwidth is appropriate for many process-control and diagnostic signals, and the gain network can be changed during calibration. Designers should verify input common-mode range, output saturation, supply sequencing, and reference-pin stability. For slower signals, adding deliberate filtering can reduce broadband noise without using the amplifier's full bandwidth.

Récapitulatif des produits recommandés

AD622ARZ Analog Devices Utilisé dans : Strain-Gage Bridge Measurement, Pressure Transducer Interface, Temperature Sensor Amplification, Medical and Bio-Signal Conditioning, Current-Shunt Measurement, Industrial Differential Signal Conditioning AD822ARZ Low-power bridge interface alternative Utilisé dans : Strain-Gage Bridge Measurement, Medical and Bio-Signal Conditioning AD827ARZ Precision differential measurement alternative Utilisé dans : Pressure Transducer Interface AD620ARZ Analog Devices Utilisé dans : Temperature Sensor Amplification AD627ARZ Related shunt-measurement amplifier Utilisé dans : Current-Shunt Measurement AD694AR Analog Devices Utilisé dans : Industrial Differential Signal Conditioning
What is the AD622ARZ instrumentation amplifier used for?
The AD622ARZ is used to amplify low-level differential sensor signals while rejecting common-mode interference. According to the Analog Devices datasheet, it provides a gain range of 1 to 1000, needs only one external resistor for gains from 2 through 1000, and supports unity gain without an external resistor. Its traditional eight-pin configuration suits bridge sensors, biomedical instrumentation, current measurement, and industrial pressure or temperature interfaces.
What are the key specifications of AD622ARZ that engineers should know?
The key AD622ARZ specifications are a 1 MHz bandwidth, a 125 µV input offset voltage, a gain range of 1 to 1000, and operation from ±18 V. The Analog Devices datasheet identifies the device as a single-channel instrumentation amplifier in an 8-SOIC package. Gain can be set with one external resistor from 2 through 1000, while unity gain requires no external resistor. These figures make it a practical choice for moderate-bandwidth differential measurement systems.
How do I set the gain on an AD622ARZ?
Set the AD622ARZ gain by connecting one external resistor between its gain-resistor pins. According to the Analog Devices product page, the component supports any gain from 2 to 1000 with that resistor, while gain 1 requires no external resistor. Use the gain equation and resistor-value table in the Analog Devices datasheet because the exact resistance for each selected gain depends on the device's specified gain-setting network.
What is the bandwidth of AD622ARZ?
The AD622ARZ has a 3 dB bandwidth of 1 MHz. This rating, stated in the Analog Devices datasheet, determines how quickly the instrumentation amplifier can respond to differential signals around its operating frequency. It is suitable for many industrial instrumentation and sensor-interface applications, but a design must also account for gain-versus-frequency performance, input common-mode limits, and output slew behavior.
What is the input offset voltage of AD622ARZ?
The AD622ARZ has a specified input offset voltage of 125 µV. This value, listed in the part specifications, represents the small differential voltage that can produce an output offset in a zero-input condition. Engineers should include it when calculating measurement uncertainty, particularly for low-level bridge, temperature, pressure, and current signals where the input signal approaches the offset magnitude.
What is the AD622ARZ pinout?
The AD622ARZ uses the standard eight-pin instrumentation-amplifier arrangement: pin 1 is RG, pin 2 is −IN, pin 3 is +IN, pin 4 is V−, pin 5 is REF, pin 6 is OUT, pin 7 is V+, and pin 8 is RG. According to the Analog Devices datasheet, the gain resistor connects between pins 1 and 8. Always use the pin-description table and package drawing when assigning PCB tracks.
Where can I download the AD622ARZ datasheet PDF?
Download the AD622ARZ datasheet PDF from the official Analog Devices document at https://www.analog.com/media/en/technical-documentation/data-sheets/AD622.pdf. The manufacturer datasheet contains the gain-setting information, electrical characteristics, pin descriptions, reference-input compensation guidance, and application details required for an eight-pin SOIC instrumentation-amplifier design.
Where can I buy AD622ARZ online and what is its lead time?
Use the Request a Quote form on this page to ask for AD622ARZ availability, current lead time, order quantity, and shipment options. The component is identified as an Analog Devices 8-SOIC instrumentation amplifier. A distributor search page may show inventory, but the quote form is the appropriate route for a transaction tied to the exact AD622ARZ ordering code and its requested quantity.
What is the price of AD622ARZ?
Use the Request a Quote form on this page for the current AD622ARZ price and volume terms. Pricing depends on the exact ordering code, quantity, delivery destination, and supply status, so a static amount can become outdated. Submit the required quantity and target packaging information with the quote request to obtain current commercial terms.
Is AD622ARZ in stock?
Request current AD622ARZ stock status through the Request a Quote form on this page. Inventory is time-sensitive and can vary by package, order quantity, and shipment destination, so a distributor search result should not be treated as a durable availability commitment. Include your required quantity, production schedule, and approved-part information when requesting supply confirmation.
What can replace the AD622ARZ as a drop-in part?
The AD622ARZ can be replaced only when the candidate uses the same 8-SOIC footprint, preserves pin functions, and provides compatible gain, supply, bandwidth, and offset performance. The evaluated candidates on this page are AD627ARZ and AD628ARZ. Before substituting either part, compare the gain equation, reference-input behavior, common-mode range, output swing, and stability requirements in the manufacturer datasheet.
Is AD622ARZ the same as AD622ARZ-R7?
The AD622ARZ and AD622ARZ-R7 are closely related AD622-family order codes, but a reel-handling suffix should not be treated as an automatically interchangeable electrical choice. The AD622ARZ-R7 is identified as the tape-and-reel ordering variant of the same 8-SOIC device family. Confirm the exact manufacturer ordering code, packing method, temperature grade, and marking requirements before substituting one order code for another.
AD622ARZ vs AD627ARZ — which is better for sensor measurement?
The AD622ARZ is a strong choice when the design prioritizes a 1 MHz bandwidth and a simple 1-to-1000 gain range. The AD627ARZ is a related single-channel 8-SOIC instrumentation amplifier, but its gain range, bandwidth, offset, input bias current, and reference behavior must be checked against the target specification. The correct choice depends on which measured parameter limits the sensor interface.
AD622ARZ vs AD620ARZ — what is the difference?
The AD622ARZ supports gains from 1 to 1000, while the related AD620ARZ family uses a different gain-setting network and supports a wider gain range. Both use the familiar eight-pin instrumentation-amplifier arrangement, so the physical PCB footprint is similar. A substitution still requires recalculating the external gain resistor and checking bandwidth, offset, common-mode range, and supply compatibility; footprint similarity alone does not guarantee an equivalent circuit.
When should I choose AD622ARZ instead of another instrumentation amplifier?
Choose the AD622ARZ when the application needs a single differential measurement channel, a 1 MHz bandwidth, and gain adjustment from 1 to 1000 in a compact 8-SOIC package. It is particularly appropriate for bridge, pressure, temperature, biomedical, and current-sensing interfaces where one external resistor is sufficient for gains from 2 through 1000. Select another candidate when it offers a required precision, bandwidth, supply, or common-mode improvement beyond the AD622ARZ specification set.
How should the AD622ARZ be laid out for reliable differential measurements?
Place the external gain resistor close to pins 1 and 8, route the two differential inputs as a compact pair, and connect the supply and ground pins with low-inductance paths. According to the Analog Devices datasheet, the reference input has specific compensation requirements that should be followed when it is driven or biased. Also verify the common-mode and output-swing limits to prevent saturation even when the differential input is correctly connected.

Données de référence d'ingénierie pour AD622ARZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the AD622ARZ when a compact, single-channel differential measurement circuit needs gains from 1 to 1000, a 1 MHz bandwidth, and operation from ±18 V. It is well suited to bridge sensors, pressure and temperature interfaces, current-shunt measurements, and biomedical instrumentation where one external resistor is sufficient for gain adjustment. Select AD627ARZ when its lower-bandwidth performance and electrical characteristics better match the target circuit. Consider AD628ARZ when its precision and bandwidth profile offers a measurable improvement over the AD622ARZ. Consider AD694AR when its precision characteristics suit the measurement, but recalculate the gain resistor and verify reference, common-mode, output-swing, and supply conditions before substitution. All three candidates use the 8-SOIC format, so package compatibility simplifies mechanical assessment but does not replace circuit-level verification.

Comparaison avec les alternatives

Paramètre Ce produit AD627ARZ AD628ARZ AD694AR
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Product Type Single-channel instrumentation amplifier Single-channel instrumentation amplifier Single-channel instrumentation amplifier Single-channel instrumentation amplifier

Principaux différenciateurs

  • Higher bandwidth than the AD627ARZ candidate (vs AD627ARZ)
  • Simple resistor-programmed gain range (vs AD627ARZ)
  • Single-ended output in the traditional eight-pin footprint (vs AD694AR)

Notes de conception

Route the two differential inputs as a compact, symmetric pair and connect the external gain resistor directly between pins 1 and 8. Minimize copper area around the input and gain nodes because parasitic capacitance can alter bandwidth and stability. Keep the analog ground return continuous and place the input connector or sensor interface so that shared supply currents do not flow through the sensitive input ground path.

Treat the REF pin as a sensitive analog node. When the reference input is driven, biased, or connected to a resistive network, use the compensation arrangement specified in the Analog Devices datasheet. Incorrect reference compensation can cause oscillation or an unexpected frequency response. In addition, verify that signal and output excursions remain inside the common-mode and output-swing limits across temperature and supply tolerance.

A replacement in the same 8-SOIC footprint is not automatically an electrical substitute. Before using AD627ARZ, AD628ARZ, or AD694AR, compare the gain equation and required resistor value, bandwidth, offset voltage, input bias current, common-mode range, output swing, reference behavior, and supply limits. Also confirm that the required order code retains the intended temperature grade and packing method.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product page and datasheet identify the AD622ARZ as an industrial instrumentation amplifier, but the available product information does not explicitly state its RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

Données vérifiées le : 2026-11-18 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD622ARZ datasheet AD622ARZ pinout AD622ARZ datasheet pdf AD622ARZ equivalent AD622ARZ replacement AD622ARZ cross reference AD622ARZ vs AD627ARZ AD622ARZ 8-SOIC footprint AD622ARZ 1 MHz instrumentation amplifier AD622ARZ gain 1 to 1000 AD622ARZ pressure sensor interface AD622ARZ price AD622ARZ stock Analog Devices AD622ARZ AD622ARZ application circuit

Composants & termes associés

Analog Devices AD622ARZ AD627ARZ AD628ARZ AD694AR AD620ARZ instrumentation amplifier differential amplifier difference amplifier signal conditioner gain-setting resistor common-mode rejection input offset voltage 3 dB bandwidth reference input bridge sensor strain-gage bridge pressure transducer temperature sensor current-shunt measurement 8-SOIC SOIC family surface-mount package analog signal conditioning single-ended output
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ