AD694BR - 4-20 mA Current Transmitter | Analog Devices
Référence : AD694BR ✓ ActifAD694BR Présentation
A current transmitter is an interface IC within the industrial measurement and control hierarchy. It accepts a voltage representing a sensed process variable and converts that voltage into a standardized 4-20 mA output. The 4 mA lower endpoint represents the zero-scale condition, while 20 mA represents full scale. This two-point signaling convention allows the same transmitter interface to work with industrial controllers, programmable controllers, indicators, and remotely installed actuators.
The AD694BR's principal features include a selectable 2 V or 10 V calibrated input span, a buffered input amplifier, and a 4-20 mA output stage. The buffered input can scale the incoming signal or accept the output of a current-mode DAC. Its 36 V maximum supply rating provides additional headroom for industrial systems, while the listed 23 mA supply-current figure identifies the device as a conventional, non-low-power transmitter rather than a micropower loop transmitter.
Analog Devices describes the AD694 as a monolithic replacement for discrete 4-20 mA transmitter designs. Integrating the input amplifier, scaling function, and current-output circuitry into one package reduces the number of discrete components required for process-control signal conditioning. This integration is particularly useful when converting factory voltage signals or DAC outputs into the current required by legacy field wiring.
Typical applications include industrial process control, factory automation, and system monitoring. The AD694BR can interface a controller to a proportional valve or actuator, transmit a measured process variable over a current loop, or replace discrete transmitter circuitry on an instrument panel. Its 16-pin SOIC package also allows assembly by automated surface-mount production equipment.
Designers should select the version matching the required input span and verify the complete pin description, supply limits, output compliance, and calibration behavior against the manufacturer datasheet before releasing a board. The 16-pin SOIC footprint requires adequate copper and thermal layout, while process-loop circuits must also account for wiring resistance, grounding, isolation, and the voltage available to drive the remote load.
This product page summarizes the AD694BR transmitter architecture, industrial applications, package details, verified manufacturer information, and drop-in options within the AD694 family. It also provides application-focused design guidance for engineers designing reliable 4-20 mA process-control interfaces, factory automation equipment, and system-monitoring instruments.
Alternatives de remplacement direct pour AD694BR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AD694BR (même facteur de forme et même empreinte) — différant par Mounting Type, Package, Maximum Supply Voltage, Operating Temperature Range, Output Current Range.
AD694BRZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD694AR
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →AD694ARZ
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →AD694BR Spécifications
| Product Type | Monolithic 4-20 mA current transmitter |
| Output Current Range | 4-20 mA |
| Calibrated Input Span 1 | 2 V |
| Calibrated Input Span 2 | 10 V |
| Maximum Supply Voltage | 36 V |
| Courant d'alimentation | 23 mA |
| Input Signal Type | High-level voltage input |
| Input Amplifier | Buffered input amplifier |
| Configuration de sortie | Standard 4-20 mA current loop |
| Plage de température de fonctionnement | -40°C to +85°C |
| Boîtier | 16-pin SOIC |
| Type de montage | Surface mount |
| Delivery Format | Tube |
| Primary Applications | Industrial process control, factory automation, and system monitoring |
Guide de configuration des broches du AD694BR 16-pin soic
Configuration des broches du AD694BR (boîtier 16-pin soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour AD694BR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AD694BR convient pour 6 applications: Industrial Process Control, Valve and Actuator Control, Factory Automation Signal Conditioning, Current-Mode DAC Interface, System Monitoring Instrumentation, Instrument Panel Signal Interface.
Industrial Process Control
The AD694BR fits industrial process-control circuits that require a voltage command or measurement to drive a standardized 4-20 mA field signal. Its buffered input stage can scale the source signal or accept a current-mode DAC output, while the calibrated 2 V and 10 V spans support common controller output ranges. This integration simplifies the interface between a control system and a remote valve or actuator. The main design consideration is ensuring that the field loop has sufficient supply voltage for the transmitter and load at the maximum wiring resistance. A 36 V maximum supply rating provides industrial headroom, but the complete loop budget must include cable drop, input-device impedance, grounding, and any protection circuitry.
Valve and Actuator Control
The AD694BR is appropriate for converting a controller’s high-level output into the 4-20 mA current expected by an industrial proportional valve or actuator. The buffered input can preserve and scale the controller signal before the transmitter generates the field current, reducing the need for a discrete input amplifier and output-current circuit. This is particularly useful when retrofitting modern control electronics to legacy current-loop field equipment. Because a current-loop fault can hold the actuator at an extreme command, verify polarity and loop continuity carefully. Component tolerances, output compliance, and the remote load’s voltage requirement should also be included in the safety review before energizing the actuator.
Factory Automation Signal Conditioning
The AD694BR can serve as the final signal-conditioning element in factory-automation equipment that must communicate over a 4-20 mA current loop. Its monolithic integration of a buffered input and current transmitter reduces board-level component count compared with a discrete implementation. The 16-pin SOIC package is suitable for automated surface-mount assembly and provides a practical path to compact controller boards. A robust factory design should consider surge, reverse polarity, and wiring transients because long field cables can expose the transmitter to more electrical stress than a protected logic circuit. Add the appropriate input filtering and loop protection only after checking the AD694 family pin descriptions and maximum electrical limits.
Current-Mode DAC Interface
The AD694BR is suitable when a current-mode DAC output must be converted into a conventional 4-20 mA process signal. The Analog Devices product description specifically identifies the buffered input amplifier as usable for scaling an input or buffering a current-mode DAC output. This allows precision digital control signals to participate in older analog field-control architectures without redesigning the actuator interface. Design the input scaling so that the DAC’s current level maps cleanly to the transmitter’s calibrated 2 V or 10 V span. Check both ends of the transfer function, including zero-scale offset and full-scale compliance, because a current-mode source and a voltage-input transmitter require careful interface calculations.
System Monitoring Instrumentation
The AD694BR can be used in monitoring equipment that converts a high-level voltage representation of a measured variable into the 4-20 mA output expected by a remote indicator, alarm system, or controller. Its monolithic transmitter architecture provides a practical replacement for discrete implementations in industrial system-monitoring equipment. The 4 mA lower output provides a live signal even at zero scale, allowing downstream systems to distinguish a zero measurement from a broken connection when the installation supports that diagnostic method. Set the input span to match the transducer or signal source, verify calibration polarity, and test the complete loop from the sensing element through the remote receiver.
Instrument Panel Signal Interface
The AD694BR is well suited to instrument-panel designs that need to present a high-level voltage measurement as a standard 4-20 mA transmission signal. Its 16-pin SOIC package supports compact surface-mount construction, while the buffered input provides a useful interface point for scaling or DAC signals. Compared with a discrete transmitter, the monolithic device can reduce assembly content and simplify the analog signal path. Nevertheless, analog accuracy still depends on correct input-span selection, reference behavior, output-loop compliance, and board layout. Confirm the complete pin assignment and calibration procedure in the manufacturer datasheet, and use stable analog grounding around the transmitter and output-current return path.
Données de référence d'ingénierie pour AD694BR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD694BRZ | AD694AR | AD694ARZ |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Monolithic current transmitter | Current transmitter | Current transmitter | Current transmitter |
| Output Current Range | 4-20 mA | 4-20 mA | 4-20 mA | 4-20 mA |
| Calibrated Input Spans | 2 V and 10 V | 2 V and 10 V | 2 V and 10 V | 2 V and 10 V |
| Input Amplifier | Buffered input amplifier | Buffered input amplifier | Buffered input amplifier | Buffered input amplifier |
Principaux différenciateurs
- Monolithic integration reduces the discrete component count required for a standard loop transmitter (vs AD694BRZ)
- Supports two standard high-level input spans (vs AD694AR)
- Maintains the same core current-loop specification across listed AD694 ordering options (vs AD694ARZ)
Notes de conception
Calculate the field-loop voltage budget before applying the 36 V maximum supply rating. Include transmitter supply voltage, cable resistance multiplied by the 20 mA maximum current, and the remote input's compliance voltage. This prevents a long cable or low-impedance actuator from leaving insufficient voltage for the transmitter to regulate its output current.
Route the input, output-current return, and supply paths to minimize voltage drops and coupling into sensitive measurement circuitry. Place the transmitter's required bypass and compensation components at the pins identified by the manufacturer datasheet. Keep the analog input path away from switched nodes and high-current actuator wiring where practical.
Confirm the input-span configuration, current-loop polarity, and zero-scale behavior before connecting a field device. A 4-20 mA receiver generally expects 4 mA at zero scale, so treating the signal as 0-20 mA can cause incorrect readings or loss of broken-wire diagnostics. Test the transmitter at both endpoints before attaching a field actuator.
Long industrial field cables can introduce conducted noise or surge events. Evaluate whether the installation requires input protection, filtering, isolation, or a grounded shield connection at the transmitter. Protection components should not load the input span or prevent the transmitter from satisfying output-loop compliance, and their ratings should be checked against the 36 V maximum supply condition.
Informations de conformité
The AD694 is an industrial interface IC rather than an automotive-qualified device. Exact environmental and material compliance must be confirmed for the selected ordering suffix.