Analog Devices

AD694BR - 4-20 mA Current Transmitter | Analog Devices

부품 번호: AD694BR ✓ 활성
36 V Vdss 4-20 mA Id 16-pin SOIC Package
MOQ: 1 |

AD694BR 개요

Analog Devices AD694BR is a monolithic 4-20 mA current transmitter designed to accept high-level voltage inputs and drive standard industrial current loops. It provides precalibrated input spans of 2 V and 10 V, supports supply operation up to 36 V, and is packaged in a 16-pin SOIC. The device combines a buffered input stage with calibrated scaling to translate process-control signals into current suitable for controlling valves, actuators, and other field equipment.

A current transmitter is an interface IC within the industrial measurement and control hierarchy. It accepts a voltage representing a sensed process variable and converts that voltage into a standardized 4-20 mA output. The 4 mA lower endpoint represents the zero-scale condition, while 20 mA represents full scale. This two-point signaling convention allows the same transmitter interface to work with industrial controllers, programmable controllers, indicators, and remotely installed actuators.

The AD694BR's principal features include a selectable 2 V or 10 V calibrated input span, a buffered input amplifier, and a 4-20 mA output stage. The buffered input can scale the incoming signal or accept the output of a current-mode DAC. Its 36 V maximum supply rating provides additional headroom for industrial systems, while the listed 23 mA supply-current figure identifies the device as a conventional, non-low-power transmitter rather than a micropower loop transmitter.

Analog Devices describes the AD694 as a monolithic replacement for discrete 4-20 mA transmitter designs. Integrating the input amplifier, scaling function, and current-output circuitry into one package reduces the number of discrete components required for process-control signal conditioning. This integration is particularly useful when converting factory voltage signals or DAC outputs into the current required by legacy field wiring.

Typical applications include industrial process control, factory automation, and system monitoring. The AD694BR can interface a controller to a proportional valve or actuator, transmit a measured process variable over a current loop, or replace discrete transmitter circuitry on an instrument panel. Its 16-pin SOIC package also allows assembly by automated surface-mount production equipment.

Designers should select the version matching the required input span and verify the complete pin description, supply limits, output compliance, and calibration behavior against the manufacturer datasheet before releasing a board. The 16-pin SOIC footprint requires adequate copper and thermal layout, while process-loop circuits must also account for wiring resistance, grounding, isolation, and the voltage available to drive the remote load.

This product page summarizes the AD694BR transmitter architecture, industrial applications, package details, verified manufacturer information, and drop-in options within the AD694 family. It also provides application-focused design guidance for engineers designing reliable 4-20 mA process-control interfaces, factory automation equipment, and system-monitoring instruments.

드롭인 대체품: AD694BR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD694BR (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Package, Maximum Supply Voltage, Operating Temperature Range, Output Current Range.

Analog Devices
Maximum Supply Voltage: +36 V
비교 대상: AD694BR →
Analog Devices
Mounting Type: Surface Mount (SMD/SMT)
Package: 16-SOIC_W (0.295 in / 7.50 mm width), exposed pad
Operating Temperature Range: -40 °C to +85 °C
비교 대상: AD694BR →

AD694BRZ

✅ 드롭인
📦 16-pin SOIC
Ordering and compliance suffix differs while the core 4-20 mA transmitter ratings remain 0% different in the listed electrical parameters.

📋 참조 대체품 (카탈로그에 없음)

AD694AR

✅ 드롭인
Analog Devices
📦 16-pin SOIC
Monolithic current transmitter IC · 4-20 mA · 0-20 mA · High-level voltage input · 10.000 V · +36 V · Single or dual supply · 1 amplifier

가격 문의

데이터시트 보기 →

AD694ARZ

✅ 드롭인
Analog Devices
📦 16-pin SOIC
Current Transmitter (4-20 mA / 0-20 mA) · Voltage · Voltage (drives current loop) · 0 mA to 20 mA (4 mA to 20 mA with live-zero offset) · 0 V to 10 V (or 0 V to 2 V) · 3 · 150 µV · 90 dB

가격 문의

데이터시트 보기 →

AD694BR 사양

Product Type Monolithic 4-20 mA current transmitter
Output Current Range 4-20 mA
Calibrated Input Span 1 2 V
Calibrated Input Span 2 10 V
Maximum Supply Voltage 36 V
공급 전류 23 mA
Input Signal Type High-level voltage input
Input Amplifier Buffered input amplifier
출력 구성 Standard 4-20 mA current loop
동작 온도 범위 -40°C to +85°C
패키지 16-pin SOIC
실장 유형 Surface mount
Delivery Format Tube
Primary Applications Industrial process control, factory automation, and system monitoring

AD694BR 16-pin soic 핀 구성 가이드

AD694BR(16-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

AD694BR의 16-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD694BR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD694BR 적합 용도: 6 애플리케이션s: Industrial Process Control, Valve and Actuator Control, Factory Automation Signal Conditioning, Current-Mode DAC Interface, System Monitoring Instrumentation, Instrument Panel Signal Interface.

🏭

Industrial Process Control

The AD694BR fits industrial process-control circuits that require a voltage command or measurement to drive a standardized 4-20 mA field signal. Its buffered input stage can scale the source signal or accept a current-mode DAC output, while the calibrated 2 V and 10 V spans support common controller output ranges. This integration simplifies the interface between a control system and a remote valve or actuator. The main design consideration is ensuring that the field loop has sufficient supply voltage for the transmitter and load at the maximum wiring resistance. A 36 V maximum supply rating provides industrial headroom, but the complete loop budget must include cable drop, input-device impedance, grounding, and any protection circuitry.

⚡

Valve and Actuator Control

The AD694BR is appropriate for converting a controller’s high-level output into the 4-20 mA current expected by an industrial proportional valve or actuator. The buffered input can preserve and scale the controller signal before the transmitter generates the field current, reducing the need for a discrete input amplifier and output-current circuit. This is particularly useful when retrofitting modern control electronics to legacy current-loop field equipment. Because a current-loop fault can hold the actuator at an extreme command, verify polarity and loop continuity carefully. Component tolerances, output compliance, and the remote load’s voltage requirement should also be included in the safety review before energizing the actuator.

⚙️

Factory Automation Signal Conditioning

The AD694BR can serve as the final signal-conditioning element in factory-automation equipment that must communicate over a 4-20 mA current loop. Its monolithic integration of a buffered input and current transmitter reduces board-level component count compared with a discrete implementation. The 16-pin SOIC package is suitable for automated surface-mount assembly and provides a practical path to compact controller boards. A robust factory design should consider surge, reverse polarity, and wiring transients because long field cables can expose the transmitter to more electrical stress than a protected logic circuit. Add the appropriate input filtering and loop protection only after checking the AD694 family pin descriptions and maximum electrical limits.

📊

Current-Mode DAC Interface

The AD694BR is suitable when a current-mode DAC output must be converted into a conventional 4-20 mA process signal. The Analog Devices product description specifically identifies the buffered input amplifier as usable for scaling an input or buffering a current-mode DAC output. This allows precision digital control signals to participate in older analog field-control architectures without redesigning the actuator interface. Design the input scaling so that the DAC’s current level maps cleanly to the transmitter’s calibrated 2 V or 10 V span. Check both ends of the transfer function, including zero-scale offset and full-scale compliance, because a current-mode source and a voltage-input transmitter require careful interface calculations.

🖥️

System Monitoring Instrumentation

The AD694BR can be used in monitoring equipment that converts a high-level voltage representation of a measured variable into the 4-20 mA output expected by a remote indicator, alarm system, or controller. Its monolithic transmitter architecture provides a practical replacement for discrete implementations in industrial system-monitoring equipment. The 4 mA lower output provides a live signal even at zero scale, allowing downstream systems to distinguish a zero measurement from a broken connection when the installation supports that diagnostic method. Set the input span to match the transducer or signal source, verify calibration polarity, and test the complete loop from the sensing element through the remote receiver.

🔧

Instrument Panel Signal Interface

The AD694BR is well suited to instrument-panel designs that need to present a high-level voltage measurement as a standard 4-20 mA transmission signal. Its 16-pin SOIC package supports compact surface-mount construction, while the buffered input provides a useful interface point for scaling or DAC signals. Compared with a discrete transmitter, the monolithic device can reduce assembly content and simplify the analog signal path. Nevertheless, analog accuracy still depends on correct input-span selection, reference behavior, output-loop compliance, and board layout. Confirm the complete pin assignment and calibration procedure in the manufacturer datasheet, and use stable analog grounding around the transmitter and output-current return path.

What is the AD694BR?
The AD694BR is a monolithic 4-20 mA current transmitter from Analog Devices that accepts a high-level voltage input and drives a standard industrial current loop. According to the Analog Devices AD694 product page, its buffered input stage can scale the input signal or buffer a current-mode DAC output. The device is intended for valves, actuators, process-control systems, factory automation, and system monitoring.
What input voltage ranges does the AD694BR support?
The AD694BR supports precalibrated input spans of 2 V and 10 V. These spans allow the transmitter to interface different controller or DAC output ranges without designing a separate discrete scaling circuit for each range. The Analog Devices AD694 documentation identifies the buffered input amplifier as the stage that scales the incoming signal before it is converted into the standard 4-20 mA current-loop output.
What is the output current range of the AD694BR?
The AD694BR produces a standard 4-20 mA output current. The lower endpoint represents the zero-scale condition, while the upper endpoint represents full scale, making the device suitable for conventional industrial current-loop wiring. According to the Analog Devices product description, this output drives valves, actuators, and other devices commonly used in process-control and factory-automation systems.
What is the maximum supply voltage for the AD694BR?
The AD694BR supports a maximum supply voltage of 36 V. This rating gives an industrial transmitter design additional margin when the field equipment is connected through wiring that may introduce voltage drop. The 36 V figure is listed in the product-search information for AD694BR, while final operating limits and application-specific derating should be confirmed against the Analog Devices datasheet.
Where can I download the AD694BR datasheet PDF?
The official Analog Devices AD694 product page provides access to the manufacturer documentation at https://www.analog.com/en/products/ad694.html. The AD694BR is a member of the AD694 family, so the family datasheet should be used for its complete electrical characteristics, pin descriptions, calibration details, and application circuit. Search-result mirrors may also host a 16-page PDF, but the manufacturer page is the preferred reference.
Where can I find the AD694BR pinout?
The AD694BR pinout is documented in the pin-description table of the Analog Devices AD694 family datasheet. The device is identified in a 16-pin SOIC package, but the complete numbered pin list must be taken from the manufacturer documentation before assigning PCB nets. Use that table to verify signal inputs, supply pins, output connections, compensation components, and any exposed functional restrictions.
Where can I buy the AD694BR online?
Use the Request a Quote form on this page to request the AD694BR from XAIPART. The form is the appropriate route for current availability, commercial terms, lot traceability, and delivery scheduling. Because industrial transmitter inventory can vary by package suffix and manufacturing lot, include the complete AD694BR ordering code and required quantity when submitting the request.
What is the price of the AD694BR?
Current commercial terms for the AD694BR are available through the Request a Quote form on this page. The form allows buyers to specify quantity, tube or other delivery requirements, and target logistics without relying on a static price that may become outdated. Quote requests should use the exact AD694BR ordering code to avoid confusion with other AD694 package, temperature, or tape-and-reel variants.
What is the lead time for the AD694BR?
Request the current AD694BR lead time through the Request a Quote form on this page. Lead time can depend on the exact ordering suffix, factory inventory, and shipment quantity, so an engineering review should not rely on a generic family estimate. Include your required delivery date and annual usage so the commercial response can reflect the correct production commitment.
Is the AD694BR in stock?
Current AD694BR stock status should be confirmed through the Request a Quote form on this page. The exact package suffix matters because tube, bulk, and reel configurations are distinct orderable forms. When requesting stock, identify the required AD694BR code, quantity, and delivery format so the response reflects the correct production and packaging option.
What are the key specifications of the AD694BR that engineers should know?
The key AD694BR specifications are a 4-20 mA output, calibrated 2 V and 10 V input spans, a maximum supply rating of 36 V, a listed supply current of 23 mA, and a 16-pin SOIC package. Analog Devices also specifies operation from -40°C to +85°C for the industrial plastic-SOIC version. These figures establish the transmitter’s basic signal-chain, voltage, thermal, and assembly constraints.
AD694BR vs AD694BRZ - which is the better drop-in replacement?
The AD694BRZ is the closest ordering option to the AD694BR because it retains the AD694 transmitter function and 16-pin SOIC format. The meaningful procurement difference is the ordering suffix and associated compliance or packaging treatment, rather than a change in the 4-20 mA conversion principle. Verify the exact manufacturer pin and ordering tables before substitution, and use the Request a Quote form for the current suffix status.
When should I choose the AD694BR instead of AD694AR?
Choose the AD694BR when the design calls specifically for that AD694 ordering configuration and the manufacturer documentation confirms the required electrical and compliance characteristics. The AD694AR belongs to the same broader transmitter family, but suffix-specific qualification and ordering conditions should be reviewed rather than assumed identical. For a production release, compare the exact ordering tables and temperature-grade requirements for both versions.
Is the AD694BR suitable for factory automation and process control?
The AD694BR is suitable for factory automation and process-control interfaces because it directly generates a standard 4-20 mA loop from a high-level voltage input. Analog Devices identifies process control, factory automation, and system monitoring as principal uses for the AD694 family. Its buffered input can also accept a scaled controller or current-mode DAC output, making it useful for valve, actuator, and measurement-interface circuits.
What can replace the AD694BR?
The closest verified replacement is the AD694BRZ because it is an AD694-family, 16-pin SOIC ordering option with the same core current-transmitter function. Other same-family order codes may be considered only after their exact package, pinout, electrical limits, and environmental ratings are checked. No verified cross-brand, pin-compatible equivalent was identified, so an AD694-family part is the safest starting point for a drop-in review.
Is there an Analog Devices equivalent for the AD694BR?
Analog Devices offers several AD694-family ordering options, including AD694AR and AD694BRZ, that are the relevant starting points for an equivalent-device review. A valid drop-in decision requires matching the 16-pin SOIC footprint, confirming the 4-20 mA output and input-span configuration, and reviewing the exact manufacturer ordering information. Use the Request a Quote form on this page to identify the currently available AD694 suffix for the required design.

엔지니어링 참조 데이터: AD694BR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the AD694BR when the design requires a monolithic 4-20 mA transmitter with a buffered 2 V or 10 V input span and a 16-pin SOIC footprint. The AD694BRZ is the closest verified drop-in starting point because it retains the same core transmitter function and package; confirm suffix-specific ordering and compliance details before production release. Consider AD694AR when its exact qualification and ordering conditions fit the project better, while AD694ARZ provides another same-family SOIC review path. AD694AQ and AD694JN use different packages and are not drop-in choices for a 16-pin SOIC PCB. No verified cross-brand pin-compatible replacement was identified, so the safest strategy is to review Analog Devices ordering options first. For every candidate, verify the numbered pinout, input-span configuration, supply limits, output compliance, temperature grade, and lifecycle status against the manufacturer documentation. The Request a Quote form on this page can be used to confirm the currently orderable suffix and commercial conditions.

대체품과의 비교

파라미터 이 제품 AD694BRZ AD694AR AD694ARZ
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Monolithic current transmitter Current transmitter Current transmitter Current transmitter
Output Current Range 4-20 mA 4-20 mA 4-20 mA 4-20 mA
Calibrated Input Spans 2 V and 10 V 2 V and 10 V 2 V and 10 V 2 V and 10 V
Input Amplifier Buffered input amplifier Buffered input amplifier Buffered input amplifier Buffered input amplifier

주요 차별점

  • Monolithic integration reduces the discrete component count required for a standard loop transmitter (vs AD694BRZ)
  • Supports two standard high-level input spans (vs AD694AR)
  • Maintains the same core current-loop specification across listed AD694 ordering options (vs AD694ARZ)

설계 노트

Calculate the field-loop voltage budget before applying the 36 V maximum supply rating. Include transmitter supply voltage, cable resistance multiplied by the 20 mA maximum current, and the remote input's compliance voltage. This prevents a long cable or low-impedance actuator from leaving insufficient voltage for the transmitter to regulate its output current.

Route the input, output-current return, and supply paths to minimize voltage drops and coupling into sensitive measurement circuitry. Place the transmitter's required bypass and compensation components at the pins identified by the manufacturer datasheet. Keep the analog input path away from switched nodes and high-current actuator wiring where practical.

Confirm the input-span configuration, current-loop polarity, and zero-scale behavior before connecting a field device. A 4-20 mA receiver generally expects 4 mA at zero scale, so treating the signal as 0-20 mA can cause incorrect readings or loss of broken-wire diagnostics. Test the transmitter at both endpoints before attaching a field actuator.

Long industrial field cables can introduce conducted noise or surge events. Evaluate whether the installation requires input protection, filtering, isolation, or a grounded shield connection at the transmitter. Protection components should not load the input span or prevent the transmitter from satisfying output-loop compliance, and their ratings should be checked against the 36 V maximum supply condition.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The AD694 is an industrial interface IC rather than an automotive-qualified device. Exact environmental and material compliance must be confirmed for the selected ordering suffix.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD694BR datasheet AD694BR datasheet pdf AD694BR pinout AD694BR specifications AD694BR 4-20 mA transmitter AD694BR 16 pin SOIC AD694BR application circuit AD694BR equivalent AD694BR replacement AD694BR vs AD694BRZ AD694BR price AD694BR stock Analog Devices AD694BR

관련 부품 & 용어

Analog Devices AD694BR AD694BRZ AD694AR AD694ARZ AD694 monolithic current transmitter 4-20 mA current loop industrial process control factory automation system monitoring high-level voltage input buffered input amplifier current-mode DAC 2 V input span 10 V input span 16-pin SOIC SOIC package family surface-mount technology interface IC analog interface semiconductor 36 V maximum supply voltage valve and actuator control
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기