Analog Devices

AD698AP - Universal LVDT Signal Conditioner | Analog Devices

Référence : AD698AP ✗ Fin de vie
Included Vdss 28-pin PLCC Package 20 kHz Speed
MOQ : 1 |

AD698AP Présentation

Analog Devices AD698AP is a universal LVDT signal-conditioner interface IC that converts the differential excitation and position signal from a Linear Variable Differential Transformer into a unipolar or bipolar DC voltage. It is packaged in a 28-pin PLCC measuring 11.51 mm by 11.51 mm. The device includes an internal oscillator and voltage reference, requires no external adjustment, supports position bandwidths to 20 kHz, and interfaces with half-bridge and four-wire LVDTs.

An LVDT signal conditioner is a specialized sensor interface within the broader industrial sensor and signal-conditioning hierarchy. It combines excitation generation, synchronous demodulation, filtering, and output-voltage conversion in one monolithic device. This integration reduces the number of external components needed for position measurement and provides a regulated analog output that can be measured directly by an ADC or control system.

The AD698AP's internal oscillator excites the LVDT, while its internal voltage reference supports repeatable signal conditioning without external calibration potentiometers. Its DC output is proportional to transducer position, and the polarity can be selected as either unipolar or bipolar according to the mechanical system and downstream interface requirements. The manufacturer's AD698 family documentation identifies a position frequency range extending to 20 kHz.

The AD698 is intended for precision displacement and position systems, including industrial machinery, robotics, laboratory automation, and motion-control equipment. It can accept signals from four-wire LVDTs and half-bridge arrangements, making it useful where the transducer wiring differs from the standard primary-secondary configuration. Because the output is proportional to position, downstream conversion can use the AD698AP output directly as the input to an analog-to-digital converter.

Circuit design should begin by matching the LVDT's excitation voltage and frequency requirements to the signal conditioner. The manufacturer's application information should be used to select external input and output filtering, verify termination values, and assess noise performance. Decoupling should follow the recommended layout closely because oscillator, reference, demodulator, and output circuitry share the same analog ground and supply environment.

This page organizes the confirmed AD698AP package, functional characteristics, sourcing information, comparison points, and design guidance into a focused engineering reference. It also distinguishes true pin-compatible alternatives from functional substitutes that require a different package or redesigned interface.

Alternatives de remplacement direct pour AD698AP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec AD698AP (même facteur de forme et même empreinte) — différant par Internal Oscillator, Internal Voltage Reference, Mounting Type, Product Type.

Analog Devices
Internal Oscillator: 1 internal excitation oscillator
Internal Voltage Reference: 1 internal voltage reference
Mounting Type: Through-hole
Comparer avec AD698AP →

AD698SQ

✅ Remplacement direct
Analog Devices
📦 28-pin PQCC (11.51 x 11.51 mm)
Universal LVDT signal conditioner IC · Monolithic signal-conditioning subsystem · Half-bridge and 4-wire LVDT · Unipolar or bipolar DC voltage · To 20 kHz · 1 internal excitation oscillator · 1 internal voltage reference · 0 adjustments required

Contactez-nous pour le prix

Voir la fiche technique →

AD698AP Spécifications

Product Type Universal LVDT signal conditioner
Signal Input LVDT differential position signal
Signal Output Unipolar or bipolar DC voltage
Supported LVDT Configurations Half-bridge and 4-wire LVDT
Maximum Position Frequency 20 kHz
Internal Oscillator Included
Internal Voltage Reference Included
Calibration Requirement No adjustments required
Package Type 28-pin PLCC
Package Dimensions 11.51 mm x 11.51 mm
Type de montage Surface mount
Statut RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Nombre de broches 28 pins

Guide de configuration des broches du AD698AP 11.51 mm x 11.51 mm

Configuration des broches du AD698AP (boîtier 11.51 mm x 11.51 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 11.51 mm x 11.51 mm pour le AD698AP

Aucune donnée de brochage détaillée disponible pour AD698AP.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD698AP convient pour 6 applications: Industrial Machine Position Feedback, Robotic Actuator Displacement, Laboratory Motion Stage Positioning, Servo Valve and Cylinder Feedback, Precision Measurement Instrumentation, Hydraulic Actuator Monitoring.

🏭

Industrial Machine Position Feedback

The AD698AP fits linear position feedback in industrial machinery because it conditions an LVDT into a DC voltage proportional to displacement. Its internal oscillator and voltage reference reduce external support components, while the 20 kHz maximum position frequency permits reasonably dynamic machine-axis measurement. The transducer must be selected for compatible excitation and sensitivity, and the analog output must remain within the input range of the downstream controller or ADC.

🤖

Robotic Actuator Displacement

The AD698AP can support closed-loop displacement measurement in robotic actuators when a four-wire or half-bridge LVDT is used. The conditioner combines excitation generation, synchronous detection, and DC output generation in one 28-pin PLCC device, helping reduce analog front-end complexity. Designers should account for mechanical vibration, cable noise, reference accuracy, and the finite bandwidth of both the transducer and the downstream sampling system.

🔧

Laboratory Motion Stage Positioning

For laboratory translation stages and precision test fixtures, the AD698AP provides an analog position signal derived directly from an LVDT. Its internal reference and no-adjustment architecture simplify setup, while unipolar or bipolar output support can match different controller conventions. The system designer should select an excitation frequency compatible with the stage's LVDT, verify settling behavior, and use suitable grounding and filtering to preserve motion-control stability.

⚙️

Servo Valve and Cylinder Feedback

The AD698AP is applicable to cylinder displacement and servo-valve feedback systems that use an LVDT to sense spool or rod position. Providing a DC output proportional to motion can simplify comparison with a controller command, while operation up to 20 kHz supports dynamic positioning signals. Critical design checks include excitation amplitude, transducer bandwidth, output saturation, mechanical resonance, and protection from electrical transients on long sensor cables.

📏

Precision Measurement Instrumentation

The AD698AP can serve as the analog front end for precision displacement instrumentation because it integrates excitation, reference, demodulation, and output conditioning. The resulting DC voltage is convenient for slow or moderate-rate high-resolution conversion and can be observed with laboratory test equipment. Measurement uncertainty remains dominated by LVDT linearity, excitation stability, mechanical alignment, output noise, and the accuracy of the external measuring system.

🏗️

Hydraulic Actuator Monitoring

The AD698AP can condition an LVDT mounted on a hydraulic cylinder to monitor extension, retraction, or spool position. A proportional DC output simplifies feedback into industrial control electronics, and the integrated oscillator avoids designing a separate excitation source. In hydraulic environments, the design must include suitable sensor-cable shielding, grounding protection, filtering, and checks for vibration-induced bandwidth requirements.

What is the AD698AP and what does it do?
The AD698AP is a monolithic universal LVDT signal-conditioner interface IC that converts LVDT position information into a unipolar or bipolar DC voltage. According to the Analog Devices AD698 product documentation, it includes an internal oscillator and voltage reference, needs no adjustment, supports half-bridge and four-wire LVDTs, and provides position-frequency operation up to 20 kHz.
What package does the AD698AP use?
The AD698AP uses a 28-pin PLCC package measuring 11.51 mm by 11.51 mm. This package identification appears in the Analog Devices AD698AP product listing, and the same package family is listed as PQCC28 by component databases. Confirm the land pattern, pin numbering, and thermal requirements against the manufacturer documentation before laying out or replacing the device.
Where can I download the AD698AP datasheet?
The official AD698 documentation and data sheet are available from the Analog Devices AD698 product page at https://www.analog.com/en/products/ad698.html. The page identifies the AD698 as a universal LVDT signal conditioner and links to the current family data sheet, product selection table, and supporting documentation. Use the manufacturer document for pin assignments, electrical limits, and application details.
Where can I find the AD698AP pinout?
Use the AD698 manufacturer data sheet linked from the official product page for the authoritative AD698AP pin description and package drawing. The confirmed device package is a 28-pin PLCC, but a complete numbered pin map was not established for this page. Do not infer pin functions from another package or suffix; verify every connection, supply pin, analog input, and output against the appropriate data-sheet revision.
What LVDT types can be connected to the AD698AP?
The AD698AP supports half-bridge and four-wire LVDT interfaces. According to the Analog Devices AD698 product information, its universal architecture is intended to accommodate both configurations while producing a DC output proportional to mechanical position. The selected transducer must still be checked for its excitation voltage, frequency, sensitivity, and electrical impedance before connection.
What is the maximum position frequency of the AD698AP?
The AD698 family supports position frequencies to 20 kHz, as stated in the Analog Devices AD698 documentation and the AD698AP technical description. This bandwidth allows the conditioner to follow relatively fast transducer motion. System performance also depends on the LVDT bandwidth, mechanical response, excitation conditions, output filtering, and the sampling rate of the downstream converter.
Does the AD698AP require external calibration adjustments?
No. The AD698AP includes an internal oscillator and an internal voltage reference, and the manufacturer describes the device as requiring no adjustments. This integrated approach reduces calibration components and simplifies the analog interface. Final measurement accuracy still depends on the selected LVDT, excitation level, mechanical alignment, grounding, filtering, and the resolution and reference accuracy of the system performing the conversion.
Is the AD698AP active or obsolete?
The AD698AP is an obsolete legacy product. The Analog Devices product page describes the AD698 family as in production, while cross-reference discussions identify the AD698AP suffix as obsolete. Distinguish the status of the family from that of this specific package and ordering suffix, and obtain lifecycle confirmation for the exact MPN before beginning a new design.
What is the best drop-in replacement for the AD698AP?
The AD698SQ is the closest documented same-family drop-in candidate for the AD698AP because it is compared as the AD698AP's PQCC28 counterpart. Before substitution, verify pin-for-pin compatibility, temperature grade, supply limits, LVDT excitation, output range, and calibration requirements in the current Analog Devices documentation. The PGA970 is a functional LVDT-conditioner alternative, but it is not established as a same-package drop-in replacement.
Can AD698SQ replace AD698AP without a PCB redesign?
AD698SQ is the candidate most directly associated with the AD698AP in the available cross-reference material, but a safe replacement still requires confirmation against the manufacturer pinout and ordering information. The comparison must cover the 28-pin package, electrical limits, excitation frequency, output polarity, temperature range, and any calibration or programming differences. Do not release the substitution based only on the shared PQCC28 package classification.
AD698AP vs AD698SQ: which one should be selected?
The AD698AP and AD698SQ are closely related legacy AD698 devices offered in the PQCC28 package family. Selection should be based on verified pin compatibility, electrical ratings, temperature grade, and availability rather than the suffix alone. For a new or maintained 28-pin design, use the exact Analog Devices ordering documentation and current lifecycle information to confirm which ordering code meets the electrical and environmental requirements.
When should I choose the AD698AP instead of a functional LVDT interface?
Choose the AD698AP when an existing 28-pin PLCC design requires the established AD698 architecture and the exact suffix remains available through an authorized sourcing route. Its integrated oscillator, reference, demodulation path, and 20 kHz maximum position frequency suit LVDT position systems. For a new design, favor a currently supported interface unless preserving the existing footprint outweighs obsolescence and sourcing risk.
Is the AD698AP suitable for robotics and industrial position control?
The AD698AP is suitable for LVDT-based industrial position measurement because it converts differential sensor signals into a DC voltage proportional to position. Its support for four-wire and half-bridge LVDTs and operation to 20 kHz can serve robotic actuators, machine axes, and laboratory stages. Noise, isolation, bandwidth, and environmental requirements should be evaluated at system level before deployment.
How should an AD698AP circuit be designed?
Design the AD698AP circuit around the transducer's excitation and output characteristics, using the manufacturer application guidance for termination, filtering, and decoupling. Keep the signal conditioner, reference, oscillator, and analog output layout compact, and provide a low-impedance return path for the analog ground. Confirm supply-voltage limits, output range, and downstream ADC input limits before finalizing component values.
Where can I request a quote and current lead time for AD698AP?
Use the Request a Quote form on this page to request AD698AP pricing, stock confirmation, lot traceability, and current lead time. Because AD698AP is a legacy ordering suffix, fulfillment conditions can vary by quantity and lot status. Provide the target quantity, package suffix, acceptable date code, and inspection requirements so sourcing can confirm the exact material rather than a related AD698 variant.

Données de référence d'ingénierie pour AD698AP — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose AD698AP for an existing design that specifically requires the AD698 architecture, a 28-pin PLCC footprint, and the confirmed half-bridge or four-wire LVDT interface. Evaluate AD698SQ when maintaining an older 28-pin design, but verify its exact pinout, electrical ratings, temperature grade, and lifecycle status before release. A modern functionally similar LVDT conditioner may be preferable for a new design when package reuse is unnecessary, but it is not a drop-in substitute without a documented pin, footprint, and electrical review. Because AD698AP is an obsolete ordering suffix, new production commitments should also include a sourcing-risk review covering traceability, lot continuity, and long-term maintenance needs.

Comparaison avec les alternatives

Paramètre Ce produit AD698SQ
Brand Analog Devices Analog Devices
Package 28-pin PLCC (11.51 x 11.51 mm) 28-pin PQCC package family; verify exact land pattern
Product Type Universal LVDT signal conditioner AD698-family LVDT signal conditioner

Principaux différenciateurs

  • Integrated excitation and reference architecture (vs AD698SQ)
  • Broad LVDT wiring support (vs AD698SQ)
  • Package-compatible service option (vs AD698SQ)

Notes de conception

Place the AD698AP close to the LVDT input and analog output paths, and keep the oscillator, reference, demodulation, and output sections free of long loops and high-impedance traces. Follow the manufacturer layout and grounding recommendations because the device combines excitation and precision demodulation functions in one package. Use a solid ground plane where appropriate and route sensor returns without sharing paths with switching-node or motor-current returns.

Treat the LVDT cable as an analog signal path and minimize exposure to motor drives, relays, and switching supplies. Use shielding or differential routing where the installation permits, terminate according to the manufacturer circuit, and place filtering close to the interface. Validate the complete transducer, cable, and filter combination because an excessively low cutoff can degrade phase margin or attenuate the intended position bandwidth.

Do not choose an alternative solely because it is an LVDT conditioner. Confirm the exact pin map, package, supply limits, excitation voltage and frequency, output range, temperature grade, and calibration behavior before substituting AD698SQ or introducing a functional alternative. Also verify that the selected LVDT is compatible with half-bridge or four-wire excitation and that the downstream converter can accept the resulting output polarity and voltage.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The confirmed product information does not state the requested compliance statuses. Do not infer RoHS, REACH, lead-free, or halogen-free qualification solely from the legacy PLCC package.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD698AP datasheet AD698AP datasheet pdf AD698AP pinout AD698AP specifications AD698AP replacement AD698AP equivalent AD698AP cross reference Analog Devices AD698AP AD698AP vs AD698SQ AD698AP LVDT signal conditioner AD698AP 28 pin PLCC AD698AP price

Composants & termes associés

Analog Devices AD698AP AD698 AD698SQ universal LVDT signal conditioner Linear Variable Differential Transformer LVDT sensor interface IC signal conditioner synchronous demodulation internal oscillator internal voltage reference DC voltage output unipolar output bipolar output half-bridge LVDT four-wire LVDT position feedback industrial automation robotic actuator 28-pin PLCC PQCC28 package family surface mount 20 kHz position frequency
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ