AD698AP - Universal LVDT Signal Conditioner | Analog Devices
MPN: AD698AP ✗ 停產AD698AP 概覽
An LVDT signal conditioner is a specialized sensor interface within the broader industrial sensor and signal-conditioning hierarchy. It combines excitation generation, synchronous demodulation, filtering, and output-voltage conversion in one monolithic device. This integration reduces the number of external components needed for position measurement and provides a regulated analog output that can be measured directly by an ADC or control system.
The AD698AP's internal oscillator excites the LVDT, while its internal voltage reference supports repeatable signal conditioning without external calibration potentiometers. Its DC output is proportional to transducer position, and the polarity can be selected as either unipolar or bipolar according to the mechanical system and downstream interface requirements. The manufacturer's AD698 family documentation identifies a position frequency range extending to 20 kHz.
The AD698 is intended for precision displacement and position systems, including industrial machinery, robotics, laboratory automation, and motion-control equipment. It can accept signals from four-wire LVDTs and half-bridge arrangements, making it useful where the transducer wiring differs from the standard primary-secondary configuration. Because the output is proportional to position, downstream conversion can use the AD698AP output directly as the input to an analog-to-digital converter.
Circuit design should begin by matching the LVDT's excitation voltage and frequency requirements to the signal conditioner. The manufacturer's application information should be used to select external input and output filtering, verify termination values, and assess noise performance. Decoupling should follow the recommended layout closely because oscillator, reference, demodulator, and output circuitry share the same analog ground and supply environment.
This page organizes the confirmed AD698AP package, functional characteristics, sourcing information, comparison points, and design guidance into a focused engineering reference. It also distinguishes true pin-compatible alternatives from functional substitutes that require a different package or redesigned interface.
直接替換替代品,適用於 AD698AP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: AD698AP (相同外形與佔位) — 差異在於 Internal Oscillator, Internal Voltage Reference, Mounting Type, Product Type.
AD698SQ
✅ 直接替換聯絡詢價
查看資料表 →AD698AP 規格
| Product Type | Universal LVDT signal conditioner |
| Signal Input | LVDT differential position signal |
| Signal Output | Unipolar or bipolar DC voltage |
| Supported LVDT Configurations | Half-bridge and 4-wire LVDT |
| Maximum Position Frequency | 20 kHz |
| Internal Oscillator | Included |
| Internal Voltage Reference | Included |
| Calibration Requirement | No adjustments required |
| Package Type | 28-pin PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| 安裝類型 | Surface mount |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| 腳位數 | 28 pins |
AD698AP 11.51 mm x 11.51 mm 腳位配置指南
AD698AP(11.51 mm x 11.51 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: AD698AP.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD698AP 適用於 6 應用s: Industrial Machine Position Feedback, Robotic Actuator Displacement, Laboratory Motion Stage Positioning, Servo Valve and Cylinder Feedback, Precision Measurement Instrumentation, Hydraulic Actuator Monitoring.
Industrial Machine Position Feedback
The AD698AP fits linear position feedback in industrial machinery because it conditions an LVDT into a DC voltage proportional to displacement. Its internal oscillator and voltage reference reduce external support components, while the 20 kHz maximum position frequency permits reasonably dynamic machine-axis measurement. The transducer must be selected for compatible excitation and sensitivity, and the analog output must remain within the input range of the downstream controller or ADC.
推薦
Robotic Actuator Displacement
The AD698AP can support closed-loop displacement measurement in robotic actuators when a four-wire or half-bridge LVDT is used. The conditioner combines excitation generation, synchronous detection, and DC output generation in one 28-pin PLCC device, helping reduce analog front-end complexity. Designers should account for mechanical vibration, cable noise, reference accuracy, and the finite bandwidth of both the transducer and the downstream sampling system.
推薦
Laboratory Motion Stage Positioning
For laboratory translation stages and precision test fixtures, the AD698AP provides an analog position signal derived directly from an LVDT. Its internal reference and no-adjustment architecture simplify setup, while unipolar or bipolar output support can match different controller conventions. The system designer should select an excitation frequency compatible with the stage's LVDT, verify settling behavior, and use suitable grounding and filtering to preserve motion-control stability.
推薦
Servo Valve and Cylinder Feedback
The AD698AP is applicable to cylinder displacement and servo-valve feedback systems that use an LVDT to sense spool or rod position. Providing a DC output proportional to motion can simplify comparison with a controller command, while operation up to 20 kHz supports dynamic positioning signals. Critical design checks include excitation amplitude, transducer bandwidth, output saturation, mechanical resonance, and protection from electrical transients on long sensor cables.
推薦
Precision Measurement Instrumentation
The AD698AP can serve as the analog front end for precision displacement instrumentation because it integrates excitation, reference, demodulation, and output conditioning. The resulting DC voltage is convenient for slow or moderate-rate high-resolution conversion and can be observed with laboratory test equipment. Measurement uncertainty remains dominated by LVDT linearity, excitation stability, mechanical alignment, output noise, and the accuracy of the external measuring system.
推薦
Hydraulic Actuator Monitoring
The AD698AP can condition an LVDT mounted on a hydraulic cylinder to monitor extension, retraction, or spool position. A proportional DC output simplifies feedback into industrial control electronics, and the integrated oscillator avoids designing a separate excitation source. In hydraulic environments, the design must include suitable sensor-cable shielding, grounding protection, filtering, and checks for vibration-induced bandwidth requirements.
推薦
工程參考資料,適用於 AD698AP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD698SQ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 28-pin PLCC (11.51 x 11.51 mm) | 28-pin PQCC package family; verify exact land pattern |
| Product Type | Universal LVDT signal conditioner | AD698-family LVDT signal conditioner |
主要差異化特點
- Integrated excitation and reference architecture (對比AD698SQ)
- Broad LVDT wiring support (對比AD698SQ)
- Package-compatible service option (對比AD698SQ)
設計說明
Place the AD698AP close to the LVDT input and analog output paths, and keep the oscillator, reference, demodulation, and output sections free of long loops and high-impedance traces. Follow the manufacturer layout and grounding recommendations because the device combines excitation and precision demodulation functions in one package. Use a solid ground plane where appropriate and route sensor returns without sharing paths with switching-node or motor-current returns.
Treat the LVDT cable as an analog signal path and minimize exposure to motor drives, relays, and switching supplies. Use shielding or differential routing where the installation permits, terminate according to the manufacturer circuit, and place filtering close to the interface. Validate the complete transducer, cable, and filter combination because an excessively low cutoff can degrade phase margin or attenuate the intended position bandwidth.
Do not choose an alternative solely because it is an LVDT conditioner. Confirm the exact pin map, package, supply limits, excitation voltage and frequency, output range, temperature grade, and calibration behavior before substituting AD698SQ or introducing a functional alternative. Also verify that the selected LVDT is compatible with half-bridge or four-wire excitation and that the downstream converter can accept the resulting output polarity and voltage.
合規資訊
The confirmed product information does not state the requested compliance statuses. Do not infer RoHS, REACH, lead-free, or halogen-free qualification solely from the legacy PLCC package.