AD8539ARZ - Dual Low Power Auto-Zero Op Amp | Analog Devices
Référence : AD8539ARZ ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.25 | $1,25 |
| 10 | $1.12 | $11,20 |
| 100 | $0.98 | $98,00 |
| 500 | $0.89 | $445,00 |
| 1 000 | $0.82 | $820,00 |
AD8539ARZ Présentation
An auto-zero amplifier is a type of operational amplifier that uses a nulling technique to continuously correct its input offset voltage, achieving near-zero offset and drift over temperature and time. This makes it a subset of precision amplifiers, which are essential in high-accuracy measurement and sensor interface circuits. The AD8539 belongs to the family of zero-drift amplifiers, which are known for their excellent DC precision and low noise.
Key features include a maximum offset voltage of 10 µV, a typical offset drift of 0.05 µV/°C, and a gain-bandwidth product of 430 kHz. The slew rate is 0.4 V/µs, and the input bias current is typically 15 pA. The amplifier is fully specified for operation from -40°C to +125°C, and it is RoHS compliant.
The AD8539 uses a proprietary auto-zero architecture that eliminates the need for external trimming components. This architecture provides a very high open-loop gain of 130 dB and a common-mode rejection ratio of 130 dB, ensuring accurate amplification of small differential signals in the presence of common-mode noise. The low supply current makes it suitable for battery-powered applications.
Typical applications include precision sensor interfaces, thermocouple and RTD signal conditioning, medical instrumentation, and portable battery-powered devices. The low offset and drift ensure accurate measurement over time and temperature, while the low power consumption extends battery life.
When designing with the AD8539, it is important to provide adequate power supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The auto-zero architecture may introduce a small amount of switching noise at the output, so a low-pass filter may be needed in noise-sensitive applications.
Alternatives de remplacement direct pour AD8539ARZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AD8539ARZ (même facteur de forme et même empreinte) — différant par Package, Slew Rate, Input Bias Current, Amplifier Type, Gain Bandwidth Product.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
AD8629ARZ
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.55 / unité
Voir la fiche technique →AD8538ARZ
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.52 / unité
Voir la fiche technique →ADA4522-2ARZ
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.9 / unité
Voir la fiche technique →AD8628ARZ
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.49 / unité
Voir la fiche technique →AD8539ARZ-REEL
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AD8667ARZ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
AD8539ARZ Valeurs maximales et caractéristiques électriques
| Number of Channels | 2 |
| Supply Voltage - Single | 2.7 V to 5.5 V |
| Supply Voltage - Dual | ±1.35 V to ±2.75 V |
| Supply Current per Amplifier | 215 µA max at 5.0 V |
| Offset Voltage | 10 µV max |
| Offset Drift | 0.05 µV/°C typical |
| Gain Bandwidth Product | 430 kHz |
| Slew Rate | 0.4 V/µs |
| Input Bias Current | 15 pA typical |
| Open-Loop Gain | 130 dB |
| Common-Mode Rejection Ratio | 130 dB |
| Plage de température de fonctionnement | -40°C to +125°C |
| Boîtier | 8-lead SOIC |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de AD8539ARZ
| Broche 1 | OUT A — Output of amplifier A |
| Broche 2 | -IN A — Inverting input of amplifier A |
| Broche 3 | +IN A — Non-inverting input of amplifier A |
| Broche 4 | V- — Negative supply or ground |
| Broche 5 | +IN B — Non-inverting input of amplifier B |
| Broche 6 | -IN B — Inverting input of amplifier B |
| Broche 7 | OUT B — Output of amplifier B |
| Broche 8 | V+ — Positive supply |
Applications typiques
AD8539ARZ convient pour 6 applications: Precision Sensor Interfaces, Thermocouple and RTD Signal Conditioning, Medical Instrumentation, Battery-Powered Portable Devices, Industrial Process Control, Test and Measurement Equipment.
Precision Sensor Interfaces
The AD8539ARZ is ideal for precision sensor interfaces due to its ultra-low offset voltage (10 µV max) and low input bias current (15 pA). It accurately amplifies small differential signals from sensors such as strain gauges, pressure sensors, and thermocouples. The auto-zero architecture ensures minimal drift over temperature and time, maintaining measurement accuracy. The low power consumption (215 µA per amplifier) makes it suitable for battery-powered sensor nodes. In a typical bridge sensor interface, the AD8539ARZ is used as a differential amplifier with external gain-setting resistors, providing high common-mode rejection (130 dB) to reject noise.
Recommandé
Thermocouple and RTD Signal Conditioning
The AD8539ARZ is well-suited for thermocouple and RTD signal conditioning due to its low offset voltage (10 µV) and low offset drift (0.05 µV/°C). These specifications ensure accurate temperature measurement over a wide range. The low input bias current (15 pA) minimizes errors when interfacing with high-impedance thermocouples. The device operates from a single 5 V supply, simplifying the design. In a typical RTD application, the AD8539ARZ is used in a bridge configuration to amplify the small voltage change from the RTD, providing a clean signal to an ADC. The auto-zero architecture eliminates the need for external offset trimming, reducing component count and calibration time.
Recommandé
Medical Instrumentation
The AD8539ARZ is suitable for medical instrumentation such as ECG, EEG, and blood glucose monitors due to its low power consumption and high precision. The low offset voltage (10 µV) and low noise ensure accurate biopotential measurements. The device operates from a 3.3 V or 5 V supply, compatible with battery-powered medical devices. The auto-zero architecture provides excellent DC stability, which is critical for long-term monitoring. In an ECG front-end, the AD8539ARZ is used as a buffer or gain stage, amplifying the small cardiac signals while rejecting common-mode interference. The low supply current (215 µA per amplifier) extends battery life, making it ideal for portable and wearable medical devices.
Recommandé
Battery-Powered Portable Devices
The AD8539ARZ is ideal for battery-powered portable devices due to its low supply current of 215 µA per amplifier at 5.0 V. This low power consumption extends battery life, making it suitable for handheld instruments, wireless sensors, and portable medical devices. The device operates from a single 2.7 V to 5.5 V supply, allowing direct battery operation. The auto-zero architecture provides high precision without the need for external trimming, reducing component count and board space. In a typical portable device, the AD8539ARZ is used for signal conditioning of sensors, such as temperature, pressure, or light, ensuring accurate readings while conserving power. The wide operating temperature range (-40°C to +125°C) ensures reliable operation in various environments.
Recommandé
Industrial Process Control
The AD8539ARZ is suitable for industrial process control applications such as pressure, flow, and level measurement. Its low offset voltage (10 µV) and high common-mode rejection (130 dB) ensure accurate signal conditioning in noisy industrial environments. The device operates from a 5 V supply, which is common in industrial control systems. The auto-zero architecture provides long-term stability, reducing calibration frequency. In a typical process control loop, the AD8539ARZ is used to amplify the output of a pressure sensor or thermocouple, providing a clean signal to a PLC or ADC. The low power consumption is beneficial for field-mounted transmitters that are powered by loop current. The wide operating temperature range (-40°C to +125°C) ensures reliable operation in harsh industrial environments.
Recommandé
Test and Measurement Equipment
The AD8539ARZ is used in test and measurement equipment such as data acquisition systems, multimeters, and precision voltage references. Its ultra-low offset voltage (10 µV) and low drift (0.05 µV/°C) ensure accurate measurement of small signals. The device operates from a 5 V supply, compatible with many test instruments. The auto-zero architecture provides excellent DC accuracy, which is essential for calibration and measurement applications. In a data acquisition system, the AD8539ARZ is used as a buffer or gain stage before the ADC, ensuring minimal signal distortion. The low input bias current (15 pA) is beneficial for high-impedance sources. The wide operating temperature range (-40°C to +125°C) ensures stable performance in laboratory and field environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AD8539ARZ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD8629ARZ | AD8538ARZ | ADA4522-2ARZ | AD8628ARZ | AD8539ARZ-REEL | AD8667ARZ |
|---|---|---|---|---|---|---|---|
| Package | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 2 | 2 | 1 | 2 | 1 | 2 | 2 |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.2 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Supply Current per Amplifier | 215 µA max | 1 mA max | 215 µA max | 830 µA max | 1 mA max | 215 µA max | 1.1 mA max |
| Offset Voltage | 10 µV max | 10 µV max | 10 µV max | 2.5 µV max | 10 µV max | 10 µV max | 50 µV max |
| Gain Bandwidth Product | 430 kHz | 2.5 MHz | 430 kHz | 2.7 MHz | 2.5 MHz | 430 kHz | 540 kHz |
| Slew Rate | 0.4 V/µs | 1 V/µs | 0.4 V/µs | 1.5 V/µs | 1 V/µs | 0.4 V/µs | 0.4 V/µs |
Principaux différenciateurs
- Ultra-low offset voltage of 10 µV max (vs AD8667ARZ)
- Low supply current of 215 µA per amplifier (vs AD8629ARZ)
- Pin-compatible with AD8629ARZ and ADA4522-2ARZ (vs AD8629ARZ)
Notes de conception
Provide adequate power supply decoupling with 0.1 µF ceramic capacitors placed as close as possible to the V+ and V- pins. For single-supply operation, connect V- to ground. The AD8539ARZ operates from 2.7 V to 5.5 V single supply, and the supply current is 215 µA max per amplifier at 5.0 V. Ensure the supply voltage does not exceed the absolute maximum ratings to avoid damage.
For optimal performance, use a solid ground plane and keep the input traces short and shielded from noise. The auto-zero architecture may introduce a small amount of switching noise at the output, so a low-pass filter may be needed in noise-sensitive applications. Place the filter components close to the output pin to minimize noise pickup.
Do not exceed the absolute maximum supply voltage of 6 V. Ensure the input voltages do not exceed the supply rails. The auto-zero amplifier has a limited bandwidth of 430 kHz, so it is not suitable for high-frequency applications. For higher bandwidth, consider alternatives like the AD8629ARZ or ADA4522-2ARZ.
Informations de conformité
RoHS compliant per Analog Devices datasheet and distributor information. AEC-Q100 not applicable as this is a general-purpose amplifier.
