AD8539ARZ - Dual Low Power Auto-Zero Op Amp | Analog Devices
N.º da peça: AD8539ARZ ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $1.25 | $1,25 |
| 10 | $1.12 | $11,20 |
| 100 | $0.98 | $98,00 |
| 500 | $0.89 | $445,00 |
| 1.000 | $0.82 | $820,00 |
AD8539ARZ Visão geral
An auto-zero amplifier is a type of operational amplifier that uses a nulling technique to continuously correct its input offset voltage, achieving near-zero offset and drift over temperature and time. This makes it a subset of precision amplifiers, which are essential in high-accuracy measurement and sensor interface circuits. The AD8539 belongs to the family of zero-drift amplifiers, which are known for their excellent DC precision and low noise.
Key features include a maximum offset voltage of 10 µV, a typical offset drift of 0.05 µV/°C, and a gain-bandwidth product of 430 kHz. The slew rate is 0.4 V/µs, and the input bias current is typically 15 pA. The amplifier is fully specified for operation from -40°C to +125°C, and it is RoHS compliant.
The AD8539 uses a proprietary auto-zero architecture that eliminates the need for external trimming components. This architecture provides a very high open-loop gain of 130 dB and a common-mode rejection ratio of 130 dB, ensuring accurate amplification of small differential signals in the presence of common-mode noise. The low supply current makes it suitable for battery-powered applications.
Typical applications include precision sensor interfaces, thermocouple and RTD signal conditioning, medical instrumentation, and portable battery-powered devices. The low offset and drift ensure accurate measurement over time and temperature, while the low power consumption extends battery life.
When designing with the AD8539, it is important to provide adequate power supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The auto-zero architecture may introduce a small amount of switching noise at the output, so a low-pass filter may be needed in noise-sensitive applications.
Alternativas drop-in para AD8539ARZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com AD8539ARZ (mesmo formato e footprint) — diferindo em Package, Slew Rate, Input Bias Current, Amplifier Type, Gain Bandwidth Product.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
AD8629ARZ
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.55 / unidade
Ver ficha técnica →AD8538ARZ
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$0.52 / unidade
Ver ficha técnica →ADA4522-2ARZ
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.9 / unidade
Ver ficha técnica →AD8628ARZ
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.49 / unidade
Ver ficha técnica →AD8539ARZ-REEL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD8667ARZ
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
AD8539ARZ Classificações máximas e características elétricas
| Number of Channels | 2 |
| Supply Voltage - Single | 2.7 V to 5.5 V |
| Supply Voltage - Dual | ±1.35 V to ±2.75 V |
| Supply Current per Amplifier | 215 µA max at 5.0 V |
| Offset Voltage | 10 µV max |
| Offset Drift | 0.05 µV/°C typical |
| Gain Bandwidth Product | 430 kHz |
| Slew Rate | 0.4 V/µs |
| Input Bias Current | 15 pA typical |
| Open-Loop Gain | 130 dB |
| Common-Mode Rejection Ratio | 130 dB |
| Faixa de temperatura de operação | -40°C to +125°C |
| Encapsulamento | 8-lead SOIC |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do AD8539ARZ
| Pino 1 | OUT A — Output of amplifier A |
| Pino 2 | -IN A — Inverting input of amplifier A |
| Pino 3 | +IN A — Non-inverting input of amplifier A |
| Pino 4 | V- — Negative supply or ground |
| Pino 5 | +IN B — Non-inverting input of amplifier B |
| Pino 6 | -IN B — Inverting input of amplifier B |
| Pino 7 | OUT B — Output of amplifier B |
| Pino 8 | V+ — Positive supply |
Aplicações típicas
AD8539ARZ é adequado para 6 aplicaçãos: Precision Sensor Interfaces, Thermocouple and RTD Signal Conditioning, Medical Instrumentation, Battery-Powered Portable Devices, Industrial Process Control, Test and Measurement Equipment.
Precision Sensor Interfaces
The AD8539ARZ is ideal for precision sensor interfaces due to its ultra-low offset voltage (10 µV max) and low input bias current (15 pA). It accurately amplifies small differential signals from sensors such as strain gauges, pressure sensors, and thermocouples. The auto-zero architecture ensures minimal drift over temperature and time, maintaining measurement accuracy. The low power consumption (215 µA per amplifier) makes it suitable for battery-powered sensor nodes. In a typical bridge sensor interface, the AD8539ARZ is used as a differential amplifier with external gain-setting resistors, providing high common-mode rejection (130 dB) to reject noise.
Recomendado
Thermocouple and RTD Signal Conditioning
The AD8539ARZ is well-suited for thermocouple and RTD signal conditioning due to its low offset voltage (10 µV) and low offset drift (0.05 µV/°C). These specifications ensure accurate temperature measurement over a wide range. The low input bias current (15 pA) minimizes errors when interfacing with high-impedance thermocouples. The device operates from a single 5 V supply, simplifying the design. In a typical RTD application, the AD8539ARZ is used in a bridge configuration to amplify the small voltage change from the RTD, providing a clean signal to an ADC. The auto-zero architecture eliminates the need for external offset trimming, reducing component count and calibration time.
Recomendado
Medical Instrumentation
The AD8539ARZ is suitable for medical instrumentation such as ECG, EEG, and blood glucose monitors due to its low power consumption and high precision. The low offset voltage (10 µV) and low noise ensure accurate biopotential measurements. The device operates from a 3.3 V or 5 V supply, compatible with battery-powered medical devices. The auto-zero architecture provides excellent DC stability, which is critical for long-term monitoring. In an ECG front-end, the AD8539ARZ is used as a buffer or gain stage, amplifying the small cardiac signals while rejecting common-mode interference. The low supply current (215 µA per amplifier) extends battery life, making it ideal for portable and wearable medical devices.
Recomendado
Battery-Powered Portable Devices
The AD8539ARZ is ideal for battery-powered portable devices due to its low supply current of 215 µA per amplifier at 5.0 V. This low power consumption extends battery life, making it suitable for handheld instruments, wireless sensors, and portable medical devices. The device operates from a single 2.7 V to 5.5 V supply, allowing direct battery operation. The auto-zero architecture provides high precision without the need for external trimming, reducing component count and board space. In a typical portable device, the AD8539ARZ is used for signal conditioning of sensors, such as temperature, pressure, or light, ensuring accurate readings while conserving power. The wide operating temperature range (-40°C to +125°C) ensures reliable operation in various environments.
Recomendado
Industrial Process Control
The AD8539ARZ is suitable for industrial process control applications such as pressure, flow, and level measurement. Its low offset voltage (10 µV) and high common-mode rejection (130 dB) ensure accurate signal conditioning in noisy industrial environments. The device operates from a 5 V supply, which is common in industrial control systems. The auto-zero architecture provides long-term stability, reducing calibration frequency. In a typical process control loop, the AD8539ARZ is used to amplify the output of a pressure sensor or thermocouple, providing a clean signal to a PLC or ADC. The low power consumption is beneficial for field-mounted transmitters that are powered by loop current. The wide operating temperature range (-40°C to +125°C) ensures reliable operation in harsh industrial environments.
Recomendado
Test and Measurement Equipment
The AD8539ARZ is used in test and measurement equipment such as data acquisition systems, multimeters, and precision voltage references. Its ultra-low offset voltage (10 µV) and low drift (0.05 µV/°C) ensure accurate measurement of small signals. The device operates from a 5 V supply, compatible with many test instruments. The auto-zero architecture provides excellent DC accuracy, which is essential for calibration and measurement applications. In a data acquisition system, the AD8539ARZ is used as a buffer or gain stage before the ADC, ensuring minimal signal distortion. The low input bias current (15 pA) is beneficial for high-impedance sources. The wide operating temperature range (-40°C to +125°C) ensures stable performance in laboratory and field environments.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para AD8539ARZ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | AD8629ARZ | AD8538ARZ | ADA4522-2ARZ | AD8628ARZ | AD8539ARZ-REEL | AD8667ARZ |
|---|---|---|---|---|---|---|---|
| Package | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 2 | 2 | 1 | 2 | 1 | 2 | 2 |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.2 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Supply Current per Amplifier | 215 µA max | 1 mA max | 215 µA max | 830 µA max | 1 mA max | 215 µA max | 1.1 mA max |
| Offset Voltage | 10 µV max | 10 µV max | 10 µV max | 2.5 µV max | 10 µV max | 10 µV max | 50 µV max |
| Gain Bandwidth Product | 430 kHz | 2.5 MHz | 430 kHz | 2.7 MHz | 2.5 MHz | 430 kHz | 540 kHz |
| Slew Rate | 0.4 V/µs | 1 V/µs | 0.4 V/µs | 1.5 V/µs | 1 V/µs | 0.4 V/µs | 0.4 V/µs |
Principais diferenciais
- Ultra-low offset voltage of 10 µV max (vs AD8667ARZ)
- Low supply current of 215 µA per amplifier (vs AD8629ARZ)
- Pin-compatible with AD8629ARZ and ADA4522-2ARZ (vs AD8629ARZ)
Notas de projeto
Provide adequate power supply decoupling with 0.1 µF ceramic capacitors placed as close as possible to the V+ and V- pins. For single-supply operation, connect V- to ground. The AD8539ARZ operates from 2.7 V to 5.5 V single supply, and the supply current is 215 µA max per amplifier at 5.0 V. Ensure the supply voltage does not exceed the absolute maximum ratings to avoid damage.
For optimal performance, use a solid ground plane and keep the input traces short and shielded from noise. The auto-zero architecture may introduce a small amount of switching noise at the output, so a low-pass filter may be needed in noise-sensitive applications. Place the filter components close to the output pin to minimize noise pickup.
Do not exceed the absolute maximum supply voltage of 6 V. Ensure the input voltages do not exceed the supply rails. The auto-zero amplifier has a limited bandwidth of 430 kHz, so it is not suitable for high-frequency applications. For higher bandwidth, consider alternatives like the AD8629ARZ or ADA4522-2ARZ.
Informações de conformidade
RoHS compliant per Analog Devices datasheet and distributor information. AEC-Q100 not applicable as this is a general-purpose amplifier.
