Analog Devices

AD96685BR - 2.5ns ECL Comparator | Analog Devices

Référence : AD96685BR ✗ Fin de vie
16-SOIC, surface mount Package
MOQ : 1 |

AD96685BR Présentation

Analog Devices AD96685BR is an ultra-fast single ECL voltage comparator with 2.5 ns propagation delay, 50 ps propagation-delay dispersion, differential inputs, and complementary open-emitter outputs in a 16-SOIC package. It operates across a -2.5 V to +5 V input common-mode range and produces outputs compatible with ECL 10K and 10KH logic families.

A high-speed comparator is a logic-family device that determines whether a differential input voltage is above or below a switching threshold. The AD96685BR belongs to the comparator hierarchy within high-speed logic ICs, where fast edge response, low delay dispersion, and controlled output levels are more important than general-purpose precision or micropower operation. Its differential input stage supports comparison of two rapidly changing signals while limiting sensitivity to common-mode voltage changes.

The principal feature of the AD96685BR is its 2.5 ns propagation delay, which supports high-speed timing decisions and pulse detection. Its 50 ps propagation-delay dispersion indicates that delay changes only slightly as input overdrive conditions vary. Complementary ECL outputs provide both true and inverted decisions, while the open-emitter architecture permits use of standard transmission-line terminations. These characteristics make the device suitable for clock recovery, edge detection, high-speed data qualification, and pulse-width discrimination.

The AD96685/AD96687 family uses a fast, high-precision differential input stage to maintain consistent propagation delay over its stated input common-mode range. Its outputs can drive transmission lines terminated through 50 ohm resistors to -2.0 V, matching conventional ECL signal-chain practice. Because edge rates are extremely high, trace geometry, termination, grounding, and isolation from adjacent clocks become essential parts of the comparator implementation rather than secondary layout details.

Typical applications include clock and data-edge detection in telecommunications equipment, timing recovery in data-conversion systems, pulse discrimination in instrumentation, high-speed thresholding in industrial control, and clock crossing or zero-cross detection in test equipment. The 16-SOIC package provides a practical surface-mount option, although system designers must minimize trace length and control impedance around the high-speed outputs.

The principal design trade-off is operating speed versus layout sensitivity. A 2.5 ns decision interval leaves little margin for long traces, poorly terminated outputs, or noisy reference sources. Keep input and output paths short, use suitable ECL termination networks, provide a low-impedance ground reference, and avoid routing adjacent high-speed signals beneath the comparator unless the board stackup provides adequate isolation.

This product page combines the manufacturer product designation, lifecycle status, comparator performance figures, termination requirements, package information, and application-focused engineering guidance. It also documents the limits of the available substitution data so engineers can distinguish a verified pin-compatible option from a merely similar high-speed comparator before committing to a board revision.

Alternatives de remplacement direct pour AD96685BR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

AD96685BR Valeurs maximales et caractéristiques électriques

Comparator Type Single, differential-input ECL comparator with complementary outputs
Propagation Delay 2.5 ns
Propagation Delay Dispersion 50 ps
Input Common-Mode Range -2.5 V to +5 V
Type de sortie Complementary open-emitter ECL
Logic Compatibility ECL 10K and 10KH
Recommended Output Termination 50 ohm to -2.0 V
Input Architecture Differential
Latch Function Yes
Boîtier 16-SOIC, surface mount
Nombre de broches 16 pins
Lifecycle Recommendation Not recommended for new designs

Guide de configuration des broches du AD96685BR 16-soic, surface mount

Configuration des broches du AD96685BR (boîtier 16-soic, surface mount). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 16-soic, surface mount pour le AD96685BR

Aucune donnée de brochage détaillée disponible pour AD96685BR.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD96685BR convient pour 6 applications: High-Speed Clock Edge Detection, Pulse-Width Discrimination, Telecommunications Data Qualification, Precision Threshold Cross-Detection, High-Speed Industrial Trigger System, Zero-Crossing Detection.

⚡

High-Speed Clock Edge Detection

The AD96685BR fits clock-edge detection circuits that must produce a clean logic decision with very short delay. Its 2.5 ns propagation delay limits the interval between a sensed edge and the resulting transition, while 50 ps propagation-delay dispersion reduces timing variation as overdrive changes. The complementary ECL outputs allow either rising or falling edge to be selected without adding another comparator. Use controlled-impedance routing and 50 ohm-to-minus-2.0-V output termination to preserve edge quality. The main design consideration is that the extremely fast response makes long PCB traces, reflection, and ground bounce more visible than they would be in a slower comparator.

🌐

Pulse-Width Discrimination

The AD96685BR is appropriate for detecting whether a pulse crosses a defined width by comparing an event signal against a delayed or threshold-derived signal. A nominal 2.5 ns decision delay supports narrow timing windows, and the 50 ps delay dispersion keeps the comparison response more consistent as the input overdrive varies. The differential input accepts complementary or level-shifted timing signals within the -2.5 V to +5 V common-mode range. Place the threshold source close to the device, provide a low-inductance ground, and terminate both ECL outputs according to the data sheet. Engineers should also account for comparator and trace delay when the target pulse width approaches only a few nanoseconds.

🌐

Telecommunications Data Qualification

The AD96685BR can qualify high-speed data transitions in telecommunications receiver and retiming paths where a rapid, repeatable threshold decision is required. Its differential input stage rejects common-mode variation while the 2.5 ns propagation delay supports fast data-path processing. Complementary open-emitter outputs interface naturally with ECL 10K or 10KH logic when terminated through 50 ohm resistors to -2.0 V. For this use, the board must prevent the comparator’s fast output transitions from coupling into the input reference. Short traces, adjacent-ground guarding, controlled return current, and careful separation from high-current switching paths are essential to preserve decision stability.

🖥️

Precision Threshold Cross-Detection

The AD96685BR supports fast threshold-crossing detection in instrumentation and measurement systems where the desired event is the transition of a differential signal rather than its absolute amplitude. Its common-mode range of -2.5 V to +5 V permits direct comparison of compatible bipolar signals, and the fast input stage helps minimize timing uncertainty between the input event and the digital decision. The complementary outputs provide both normal and inverted threshold indications for downstream counting or capture logic. Designers should create a low-noise threshold reference, keep the input network compact, and verify input slew rate and overdrive requirements against the manufacturer timing and electrical-characteristic tables.

🏭

High-Speed Industrial Trigger System

The AD96685BR can serve as the fast decision element in an industrial trigger or event-capture system that must respond to narrow transitions. Its 2.5 ns propagation delay and 50 ps delay dispersion are useful when repeatable event timing is more important than slow general-purpose precision. The open-emitter ECL outputs require appropriate termination and isolation from inductive loads, so the output stage should feed a nearby buffer or logic device rather than a long cable. Use a continuous ground plane, compact decoupling, and controlled routing to prevent switching transients from changing the threshold decision. The NRND lifecycle status should also be considered when designing long-lived industrial equipment.

📺

Zero-Crossing Detection

The AD96685BR can generate a precise digital indication when a differential analog signal crosses zero or another threshold. Its differential input arrangement is useful when the crossing signal is referenced to a bias network, and the fast 2.5 ns response captures events that slower comparators might blur or miss. The complementary outputs allow both transition directions to be monitored. For best results, the signal should have sufficient slew rate and overdrive, while the threshold reference must remain quiet relative to the input. Keep the comparator close to the receiver, route outputs as controlled-impedance traces, and use the recommended 50 ohm termination to -2.0 V. These steps are particularly important when the crossing event is repetitive and timing jitter must remain low.

Récapitulatif des produits recommandés

AD96687 Related dual ultrafast ECL comparator Utilisé dans : High-Speed Clock Edge Detection, Pulse-Width Discrimination, Telecommunications Data Qualification, High-Speed Industrial Trigger System OPA828ID Texas Instruments Utilisé dans : High-Speed Clock Edge Detection, Telecommunications Data Qualification, Precision Threshold Cross-Detection, Zero-Crossing Detection AD8561ANZ Single-supply ultrafast comparator alternative candidate Utilisé dans : Pulse-Width Discrimination, Precision Threshold Cross-Detection, High-Speed Industrial Trigger System, Zero-Crossing Detection
What is the propagation delay of the AD96685BR?
The AD96685BR has a nominal propagation delay of 2.5 ns. According to the Analog Devices AD96685/AD96687 data sheet, the device also provides 50 ps propagation-delay dispersion, meaning its switching delay varies only slightly as the input overdrive changes. These ultrafast timing characteristics make the comparator suitable for clock-edge detection, pulse discrimination, high-speed data qualification, and timing systems requiring a response within a few nanoseconds.
Is the AD96685BR a single or dual comparator?
The AD96685BR is a single comparator. Analog Devices describes the AD96685 as the single-channel member and the AD96687 as the dual-channel member of the related family. The AD96685BR provides one differential comparison function with complementary open-emitter outputs, allowing the true and inverted decisions to be used together without adding a second physical comparator.
What logic levels does the AD96685BR support?
The AD96685BR produces complementary outputs compatible with ECL 10K and 10KH logic families. Its open-emitter outputs are intended for termination through 50 ohm resistors to -2.0 V, as described in the Analog Devices AD96685/AD96687 data sheet. The correct termination network is important because the output architecture and very fast transition rates require controlled impedance and current return paths.
What is the input common-mode range of the AD96685BR?
The AD96685BR accepts an input common-mode range from -2.5 V to +5 V. According to the Analog Devices AD96685/AD96687 data sheet, the high-precision differential input stage maintains consistent propagation delay across this range. Engineers should still verify the operating supply configuration, input levels, threshold method, and absolute maximum conditions before applying the comparator to a new circuit.
Where can I download the AD96685BR datasheet PDF?
The official AD96685BR data sheet is available from Analog Devices at the product data-sheet link on this page. The document covers the AD96685 and AD96687 family, including the AD96685 single comparator and AD96687 dual comparator. Use the manufacturer data sheet for the complete pin-description table, electrical characteristics, supply arrangements, timing definitions, and application guidance.
Where can I find the AD96685BR pinout?
The AD96685BR pinout is shown in the pin-description and package-drawing sections of the Analog Devices AD96685/AD96687 data sheet. The device is supplied in a 16-SOIC package. Use the manufacturer document when assigning signals because the exposed package drawing and pin table define the correct connectivity for supply, ground, differential inputs, latch control, and complementary outputs.
What can replace the AD96685BR?
The AD96685BR should be replaced only with a comparator that has the same 16-SOIC footprint, compatible pin assignments, compatible ECL output levels, and acceptable timing and input-range characteristics. Analog Devices offers the AD96687 in the related family, but it is a dual comparator and cannot automatically be treated as a pin-for-pin substitute. No cross-brand drop-in replacement is identified in the available cross-reference information, so board changes require engineering verification.
AD96685BR vs AD96687 - which comparator should I choose?
Choose the AD96685BR when the design requires one ultrafast differential comparison channel; choose the AD96687 when two independent comparisons are needed. The Analog Devices family documentation identifies a 2.5 ns propagation delay for AD96685 and describes the AD96687 as an equally fast dual comparator. Because the channel count and pin assignments differ, the AD96687 is not a direct replacement for the single AD96685BR.
What is the difference between the AD96685BR and AD96685BH?
Both parts belong to the AD96685 single-comparator family, but the package and ordering suffix distinctions must be checked in the manufacturer ordering guide before substitution. The AD96685BR is identified as a 16-SOIC device, while AD96685BH denotes a different orderable package or grade configuration. Do not assume mechanical, temperature, or lifecycle equivalence solely because the base MPN and electrical function are similar.
When should I choose the AD96685BR over a slower comparator?
Choose the AD96685BR when timing margin requires a nominal 2.5 ns propagation delay and consistent behavior across changing overdrive conditions. Its 50 ps propagation-delay dispersion is particularly useful in pulse-width discrimination, high-speed edge detection, clock qualification, and data synchronization. A slower comparator may be appropriate when cost, supply current, input precision, or relaxed edge-rate requirements dominate, but it may not resolve closely spaced events.
Is the AD96685BR suitable for high-speed clock detection?
Yes, the AD96685BR is suitable for high-speed clock and data-edge detection when its ECL output and termination requirements are supported by the surrounding circuit. The 2.5 ns propagation delay and 50 ps delay dispersion suit ultra-fast decision-making, while complementary outputs allow either edge polarity to be selected. Keep traces short, terminate outputs as specified, and provide a stable ground and threshold reference.
How should the AD96685BR outputs be terminated?
The Analog Devices AD96685/AD96687 data sheet recommends terminating the open-emitter outputs through 50 ohm resistors to -2.0 V, or through an equivalent ECL termination arrangement. Correct termination establishes the required high and low levels while controlling transmission-line reflections. For routes longer than a few centimeters, controlled-impedance routing techniques may be necessary to preserve transition times and suppress ringing.
Can the AD96685BR replace the AD96687?
No, not as a direct drop-in replacement. The AD96685BR is a single comparator, whereas the AD96687 is a dual comparator with a different channel count and corresponding pin arrangement. Although both devices are described as ultrafast ECL comparators, electrical family similarity does not establish pin compatibility. A replacement requires a valid footprint, pin map, logic levels, timing requirements, and application-function review.
What are the key specifications of the AD96685BR that engineers should know?
The key AD96685BR specifications are a 2.5 ns propagation delay, 50 ps propagation-delay dispersion, a -2.5 V to +5 V input common-mode range, complementary ECL 10K and 10KH-compatible outputs, and a 16-SOIC package. The open-emitter outputs are designed for 50 ohm termination to -2.0 V. Analog Devices also marks the AD96685 as not recommended for new designs, making lifecycle review essential.
Where can I request a quote for AD96685BR?
Use the Request a Quote form on this page to request current AD96685BR commercial terms, availability, minimum order quantity, and lead time. The manufacturer identifies the AD96685 as not recommended for new designs, so procurement should include an obsolescence and last-time-buy review. The form is the appropriate route for an exact-order quotation and supply confirmation without relying on stale catalog pricing.
How much does the AD96685BR cost and is it in stock?
Current AD96685BR price, stock status, minimum order quantity, and lead time should be requested through the Request a Quote form on this page. The AD96685 is marked not recommended for new designs, so supply status may vary and existing projects should confirm allocation requirements early. A quotation should identify the exact 16-SOIC order code, delivery quantity, and production schedule.

Données de référence d'ingénierie pour AD96685BR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the AD96685BR when a design requires a single ultra-fast ECL comparator with a nominal 2.5 ns propagation delay, 50 ps propagation-delay dispersion, differential inputs, and complementary open-emitter outputs in a 16-SOIC package. It is particularly suitable for clock-edge detection, pulse discrimination, data qualification, threshold crossing, and other circuits where response time is more important than general-purpose precision or low supply current. The related AD96687 should be selected when two comparison channels are needed, but its different channel count and pin arrangement prevent it from serving as a direct AD96685BR replacement. Before selecting any other substitute, verify the footprint, complete pin map, input common-mode range, output levels, termination architecture, timing, and lifecycle status. Because Analog Devices marks the AD96685 as not recommended for new designs, engineers should also evaluate whether the timing benefit justifies using a NRND device in a new production program.

Notes de conception

Keep comparator inputs and outputs physically short because the AD96685BR operates with a 2.5 ns propagation delay. Route high-speed outputs over a continuous reference plane, avoid stubs, and keep the input threshold network close to the device. Separate sensitive input traces from clock and data outputs carrying comparable edge rates to reduce capacitive and inductive coupling.

Terminate the complementary open-emitter outputs through 50 ohm resistors to -2.0 V, or use an equivalent ECL termination arrangement. When routes exceed a few centimeters, use controlled-impedance routing and verify transitions with an oscilloscope. Incorrect termination can create reflections, overshoot, ringing, and inconsistent decision timing even when the comparator itself is operating correctly.

Do not treat the AD96687 as a direct replacement for the AD96685BR solely because both belong to the same ultrafast ECL family. The AD96687 is a dual comparator and has different channel and pin requirements. Also review input slew rate, overdrive, latch timing, supply sequencing, and absolute maximum limits in the manufacturer data sheet before adapting an existing AD96685 design.

Provide a low-impedance ground reference and place input, output, and supply-connection paths to minimize loop area. Use a continuous ground plane rather than fragmented return paths, and place any bypass components at the pins identified in the manufacturer application guidance. Because the device is NRND, preserve the footprint and pin mapping for possible sourcing from original inventory or a carefully qualified second source.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance status was not established from the manufacturer product page excerpts. The device is a general-purpose ECL logic IC and is not identified as an AEC-Q100 automotive product.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD96685BR datasheet AD96685BR pinout AD96685BR datasheet pdf AD96685BR propagation delay AD96685BR ECL output termination AD96685BR 16-SOIC AD96685BR equivalent AD96685BR replacement AD96685BR cross reference AD96685BR vs AD96687 AD96685BR clock edge detection AD96685BR pulse width discrimination Analog Devices AD96685BR AD96685BR price AD96685BR stock

Composants & termes associés

Analog Devices AD96685BR AD96685 AD96687 AD8561ANZ OPA828ID voltage comparator high-speed comparator differential comparator logic IC ECL 10K ECL 10KH propagation delay propagation delay dispersion input common-mode range open-emitter output complementary output 16-SOIC SOIC package family surface mount pulse-width discrimination clock edge detection transmission-line termination 50 ohm termination NRND
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ