Analog Devices

AD9835BRU - 50MHz 10-Bit DDS IC | Analog Devices

Référence : AD9835BRU ✓ Actif
5 V Vdss 16-lead TSSOP Package 50 MHz Speed
MOQ : 1 |

AD9835BRU Présentation

Analog Devices AD9835BRU is a 50 MHz direct digital synthesis IC with a 10-bit on-chip DAC, 32-bit frequency tuning word, and 16-lead TSSOP package. It generates digitally created sine waves up to 25 MHz and supports serial frequency and phase modulation from a reference clock.

A direct digital synthesizer, or DDS, is a programmable waveform generator built around a phase accumulator, waveform lookup table, and digital-to-analog converter. The AD9835 combines these blocks on one CMOS device, allowing an external microcontroller or logic circuit to control the generated frequency through serial data writes. In system terms, it belongs to the clock and timing hierarchy, combining a digital waveform engine with an analog output stage.

The AD9835BRU operates from a 5 V supply and reaches a maximum clock speed of 50 MHz. Its on-chip 10-bit DAC provides the sine-wave output, while the 32-bit tuning word allows detailed frequency control when combined with the reference clock. The device also includes a COS lookup table, phase-modulation and frequency-modulation capabilities, a power-down option, and serial loading for programming from external logic.

Internally, the phase accumulator converts the programmed frequency tuning word into a phase address. The COS lookup table translates that address into a digital waveform value, and the 10-bit DAC converts the result into the analog output. This architecture permits frequency changes through serial control rather than an analog tuning element, making the output suitable for controlled, repeatable signal generation.

Typical applications include DDS tuning, digital demodulation, waveform generation, communications test equipment, and frequency synthesis. The AD9835 is particularly appropriate when an adjustable or modulated sine source is needed with a compact 16-lead TSSOP footprint. Its 5 V supply and single-chip architecture also simplify circuits that would otherwise require a divider, DAC, and external waveform memory.

Designers should account for output filtering, reference-clock stability, and DAC output compliance. The manufacturer states that the device can create sine waves up to 25 MHz, but the usable output spectrum depends on the reference clock, frequency-word calculation, external reconstruction filter, and output-network impedance. Power-supply decoupling and a clean clock source are particularly important for minimizing phase noise and unwanted harmonics.

This page combines the manufacturer architecture description with application-oriented guidance for DDS tuning, digital demodulation, and modulated signal generation. It also organizes package, programming, sourcing, and replacement information to support faster engineering decisions and board-level planning.

Alternatives de remplacement direct pour AD9835BRU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

AD9835BRU Spécifications

Product Type Direct Digital Synthesis IC
Fréquence d'horloge maximale 50 MHz
DAC Resolution 10 bit
Frequency Tuning Word Resolution 32 bit
Maximum Generated Sine-Wave Frequency 25 MHz
Tension d'alimentation 5 V
Power Consumption 200 mW
Type de sortie Buffered analog sine-wave output
On-Chip Waveform Table COS lookup table
Programming Interface Serial interface
Modulation Capabilities Frequency modulation and phase modulation
Power-Down Feature Yes
Boîtier 16-lead TSSOP
Package Width 4.40 mm

Guide de configuration des broches du AD9835BRU 4.40 mm

Configuration des broches du AD9835BRU (boîtier 4.40 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 4.40 mm pour le AD9835BRU

Aucune donnée de brochage détaillée disponible pour AD9835BRU.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

AD9835BRU convient pour 6 applications: DDS Frequency Tuning, Digital Demodulation, Communications Test Equipment, Frequency-Signal Generation, Phase-Modulated Waveform Source, Industrial Signal-Control Module.

🌐

DDS Frequency Tuning

The AD9835BRU fits DDS tuning because a 32-bit frequency tuning word provides detailed control over the generated frequency when referenced to a stable clock. The 50 MHz maximum clock and 10-bit on-chip DAC support sine-wave generation up to 25 MHz, while frequency and phase modulation allow the output to be adjusted without changing the external hardware. The designer calculates the required tuning word for the target frequency, loads it through the serial interface, and uses an external reconstruction filter to remove the DAC image components. Clock jitter, reference accuracy, and output filtering strongly influence phase noise and harmonic performance, so the clock source and filter must be designed together with the desired signal quality.

📡

Digital Demodulation

The AD9835BRU can serve as the controllable reference source in a digital demodulation system, where a receiver generates a local signal at a programmed frequency and compares it with the incoming carrier. Its 32-bit tuning word, phase accumulator, and phase-modulation capability permit precise adjustment of frequency and phase relationships, while the 10-bit DAC produces the required sinusoidal reference. The generated output should be band-limited with an appropriate reconstruction filter and checked for compliance at the selected amplitude. This arrangement is useful when the demodulation controller already computes a tuning word and needs a compact alternative to a bank of fixed-frequency analog oscillators.

🖥️

Communications Test Equipment

The AD9835BRU is suitable for generating adjustable test tones in communications equipment because frequency and phase can be changed through serial control rather than mechanical tuning. Its 50 MHz clock rating, 32-bit frequency tuning word, and 10-bit DAC support carrier and intermediate-frequency simulation, while phase modulation enables simple modulation tests. A laboratory instrument can use an external microcontroller to load new values and automate sweep sequences. The output filter, attenuation, and impedance matching network require careful design, particularly near the 25 MHz upper sine-wave limit, because quantization images and DAC compliance errors can degrade otherwise accurate measurements.

⚡

Frequency-Signal Generation

The AD9835BRU provides a compact way to create digitally synthesized sine signals for bench fixtures, sensor excitation, and signal-conditioning prototypes. Its single-chip architecture replaces a separate phase accumulator, waveform memory, and DAC, and the 5 V supply simplifies integration with conventional digital control logic. The 10-bit DAC establishes the available amplitude and linearity, so applications requiring low distortion may need careful output filtering and gain calibration. Stable reference-clock routing and short serial-control traces help maintain repeatable operation, while the power-down function allows the output stage to be disabled when the generator is not needed.

🎧

Phase-Modulated Waveform Source

The AD9835BRU is appropriate when a test source must vary phase as well as frequency because the device provides both phase and frequency modulation within its direct digital synthesis architecture. The 32-bit tuning word controls the base frequency, and the phase-adjust capability supports synchronized or offset waveforms. Designers can load settings through the serial interface and observe the filtered DAC output with external test equipment. Because phase accuracy is influenced by the reference clock and programming implementation, the controller should use deterministic updates and the analog path should preserve clock and control-signal integrity to avoid adding phase jitter.

🏭

Industrial Signal-Control Module

The AD9835BRU can form the signal-generation section of an industrial control module that produces a variable reference tone for downstream equipment. The serial interface allows a controller to update the operating frequency without mechanical adjustment, and the 16-lead TSSOP package supports compact board layouts. Its 5 V operating supply and approximately 200 mW stated power consumption are compatible with many embedded systems, although layout must preserve a low-noise supply and reference clock. The output should include appropriate attenuation, filtering, and protection before connecting to external equipment through long cables or high-impedance measurement circuits.

Récapitulatif des produits recommandés

AD9835BRUZ Same AD9835 family and 16-lead TSSOP configuration Utilisé dans : DDS Frequency Tuning, Digital Demodulation, Communications Test Equipment, Frequency-Signal Generation, Phase-Modulated Waveform Source, Industrial Signal-Control Module AD9835BRU-REEL7 AD9835BRU in a reel-ordering configuration Utilisé dans : DDS Frequency Tuning, Digital Demodulation, Communications Test Equipment, Frequency-Signal Generation, Phase-Modulated Waveform Source, Industrial Signal-Control Module
What is the AD9835BRU?
The AD9835BRU is a 50 MHz direct digital synthesis IC that combines a phase accumulator, COS lookup table, and 10-bit DAC to generate sine waves up to 25 MHz. According to the Analog Devices datasheet, the device uses 32-bit frequency tuning and provides frequency modulation, phase modulation, serial programming, and a power-down option in a 16-lead TSSOP package.
What are the key specifications of AD9835BRU that engineers should know?
The AD9835BRU combines a 50 MHz maximum clock, 10-bit DAC, 32-bit frequency tuning word, 5 V supply, and 16-lead TSSOP package. The Analog Devices datasheet also identifies an on-chip COS lookup table, serial loading, frequency and phase modulation, a power-down function, and a typical power-consumption value of 200 mW.
Where can I download the AD9835BRU datasheet PDF?
The official AD9835 datasheet PDF is available from Analog Devices at the datasheet_url on this page. It describes the phase accumulator, COS lookup table, 10-bit DAC, serial programming pins, output circuitry, frequency and phase modulation, power-down behavior, and output compliance requirements for the AD9835 family.
Where can I find the AD9835BRU pinout?
The AD9835BRU pinout is shown in the pin-description diagram and table in the official Analog Devices AD9835 datasheet. Because the package is a 16-lead TSSOP, use that document to map every lead and exposed board function before assigning PCB tracks or programming the serial interface.
How is the AD9835BRU frequency programmed?
The AD9835BRU is programmed through its serial interface using a 32-bit frequency tuning word. The manufacturer notes that the frequency is determined from the reference-clock frequency and the programmed tuning word; Analog Devices ADIsimDDS can calculate the required FTW for a desired output frequency and estimate spectral performance.
Can AD9835BRU generate modulated sine waves?
Yes, the AD9835BRU supports both frequency modulation and phase modulation. The Analog Devices datasheet identifies these as built-in modulation capabilities and notes that the chip can implement simple and complex modulation schemes through its digital architecture, making it useful for DDS tuning and digital demodulation.
What is the maximum output frequency of AD9835BRU?
The AD9835BRU can create digitally generated sine waves up to 25 MHz under the conditions described by Analog Devices. The device itself has a 50 MHz maximum clock rating, but practical usable output quality also depends on the selected frequency word, output compliance, external filtering, and the required signal-to-noise performance.
AD9835BRU vs AD9835BRUZ - which part should I select?
AD9835BRU and AD9835BRUZ refer to the same AD9835 device in a 16-lead TSSOP package, with the suffix distinguishing the orderable packaging configuration. For a new design, confirm the required mechanical form, reel or tube handling, and lifecycle status in the Analog Devices product documentation before committing the BOM.
What can replace the AD9835BRU?
A true drop-in replacement must preserve the 16-lead TSSOP footprint, pin assignment, 5 V supply, 10-bit DAC architecture, 32-bit tuning interface, and modulation behavior. The available cross-reference results identify AD9835BRU-REEL7 as mechanically and functionally consistent, but it is a reel-ordering configuration rather than a distinct engineering alternative.
Is AD9835BRU suitable for digital demodulation?
Yes, AD9835BRU is suitable for digital demodulation because it combines a 50 MHz clock capability, programmable 32-bit frequency tuning, phase accumulation, and adjustable phase modulation. According to the Analog Devices application information, the architecture supports DDS tuning, digital demodulation, and other programmable waveform-generation tasks.
When should I choose AD9835BRU for signal generation?
Choose AD9835BRU when a design needs a digitally programmed sine source with phase or frequency modulation rather than a fixed analog oscillator. It is especially useful when an external controller can calculate and load the 32-bit tuning word, and when the required output can be supported by the 5 V supply, 10-bit DAC, and an external reconstruction filter.
Where to buy AD9835BRU online?
Use the Request a Quote form on this page to request AD9835BRU availability, lead time, and an order quotation from XAIPART. The exact stock position and delivery schedule can change, so submit the requested quantity and target assembly location for a current response rather than relying on a static listing.
What is the price of AD9835BRU?
Current AD9835BRU pricing is obtained through the Request a Quote form on this page. The form can reflect the requested quantity, purchasing schedule, and current sourcing conditions without embedding a potentially stale price into the technical product content.
What is the lead time for AD9835BRU?
The current lead time for AD9835BRU should be requested through the Request a Quote form on this page. Provide the required quantity, packaging preference, and delivery schedule so the supplier can confirm availability and a committed lead time for the exact orderable MPN.
Is AD9835BRU in stock?
Use the Request a Quote form on this page to check the current AD9835BRU stock position. Because inventory changes by order quantity and purchasing channel, the form provides a direct way to request the latest availability rather than publishing a potentially outdated stock statement.
What design considerations apply to the AD9835BRU DDS output?
The AD9835BRU output requires attention to reference-clock quality, the 32-bit tuning-word calculation, DAC output compliance, and reconstruction filtering. Analog Devices states that specifications may not be met when the DAC output exceeds its specified compliance range, so an external low-pass filter and suitable output termination should be designed with the target frequency and distortion in mind.

Données de référence d'ingénierie pour AD9835BRU — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the AD9835BRU when the design needs a digitally programmable sine source with a 50 MHz clock capability, a 10-bit on-chip DAC, and direct frequency or phase modulation. It is especially appropriate for DDS tuning, digital demodulation, automated communications test signals, and compact embedded signal generators. The device requires a stable reference clock, correct serial programming, an external reconstruction filter, and attention to DAC output compliance. A fixed-frequency analog oscillator may be simpler when no programmability or modulation is required, while a higher-resolution waveform generator should be selected when the 10-bit DAC is insufficient for the required distortion or spectral purity. Because no technically distinct pin-compatible drop-in options were confirmed, engineers should verify the official package, interface, and timing details before approving a substitute.

Comparaison avec les alternatives

Paramètre Ce produit
Package 16-lead TSSOP
Brand Analog Devices
Product Type Direct Digital Synthesis IC
Maximum Clock Frequency 50 MHz
DAC Resolution 10 bit
Frequency Tuning Word 32 bit
Maximum Generated Sine-Wave Frequency 25 MHz
Supply Voltage 5 V
Programming Interface Serial
Modulation Support Frequency modulation and phase modulation

Principaux différenciateurs

  • Single-chip programmable waveform generation (vs Discrete phase-accumulator, memory, and DAC implementations)
  • Fine frequency programming resolution (vs Conventional fixed-frequency analog oscillators)
  • Integrated modulation capability (vs Fixed-output sine-wave generators)

Notes de conception

Route the reference clock to the AD9835BRU as a short, controlled-impedance trace and keep it away from the DAC output and reconstruction filter. A jittery or noisy reference clock directly degrades the generated phase noise and frequency stability. Provide a clean ground return and use the pin-description and layout guidance in the manufacturer datasheet when assigning the analog and digital return paths.

Place the AD9835BRU close to its reference clock, decoupling network, and output-reconstruction components to minimize trace area and unwanted coupling. The Analog Devices datasheet notes that the chip requires one reference clock, one low-precision resistor, and eight decoupling capacitors; follow the recommended component placement and values shown in the typical application circuits rather than substituting arbitrary networks.

Do not assume that the generated frequency alone guarantees a clean analog waveform. The 10-bit DAC produces quantized components that require an appropriate reconstruction filter, and the Analog Devices datasheet warns that specifications may not be met when the DAC output exceeds its specified compliance range. Check output amplitude and compliance before increasing gain or driving a downstream load.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer product page and datasheet results do not provide explicit compliance classifications in the retrieved text. The standard AD9835BRU is not identified as an automotive-qualified variant.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

AD9835BRU datasheet AD9835BRU pinout AD9835BRU datasheet pdf AD9835BRU equivalent AD9835BRU replacement AD9835BRU cross reference AD9835BRU 50MHz DDS AD9835BRU 10-bit DAC AD9835BRU TSSOP-16 AD9835BRU application circuit Analog Devices AD9835BRU AD9835BRU price AD9835BRU stock AD9835BRU vs AD9835BRUZ

Composants & termes associés

Analog Devices AD9835BRU AD9835BRUZ AD9835BRU-REEL7 Direct Digital Synthesis DDS Numerically Controlled Oscillator Phase Accumulator COS Lookup Table Digital-to-Analog Converter 10-bit DAC 32-bit Frequency Tuning Word Frequency Modulation Phase Modulation TSSOP-16 TSSOP Surface Mount CMOS Reconstruction Filter Output Compliance Serial Interface Power-Down Mode Digital Demodulation DDS Tuning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ