AD9835BRU - 50MHz 10-Bit DDS IC | Analog Devices
MPN: AD9835BRU ✓ فعالAD9835BRU نمای کلی
A direct digital synthesizer, or DDS, is a programmable waveform generator built around a phase accumulator, waveform lookup table, and digital-to-analog converter. The AD9835 combines these blocks on one CMOS device, allowing an external microcontroller or logic circuit to control the generated frequency through serial data writes. In system terms, it belongs to the clock and timing hierarchy, combining a digital waveform engine with an analog output stage.
The AD9835BRU operates from a 5 V supply and reaches a maximum clock speed of 50 MHz. Its on-chip 10-bit DAC provides the sine-wave output, while the 32-bit tuning word allows detailed frequency control when combined with the reference clock. The device also includes a COS lookup table, phase-modulation and frequency-modulation capabilities, a power-down option, and serial loading for programming from external logic.
Internally, the phase accumulator converts the programmed frequency tuning word into a phase address. The COS lookup table translates that address into a digital waveform value, and the 10-bit DAC converts the result into the analog output. This architecture permits frequency changes through serial control rather than an analog tuning element, making the output suitable for controlled, repeatable signal generation.
Typical applications include DDS tuning, digital demodulation, waveform generation, communications test equipment, and frequency synthesis. The AD9835 is particularly appropriate when an adjustable or modulated sine source is needed with a compact 16-lead TSSOP footprint. Its 5 V supply and single-chip architecture also simplify circuits that would otherwise require a divider, DAC, and external waveform memory.
Designers should account for output filtering, reference-clock stability, and DAC output compliance. The manufacturer states that the device can create sine waves up to 25 MHz, but the usable output spectrum depends on the reference clock, frequency-word calculation, external reconstruction filter, and output-network impedance. Power-supply decoupling and a clean clock source are particularly important for minimizing phase noise and unwanted harmonics.
This page combines the manufacturer architecture description with application-oriented guidance for DDS tuning, digital demodulation, and modulated signal generation. It also organizes package, programming, sourcing, and replacement information to support faster engineering decisions and board-level planning.
جایگزینهای drop-in برای AD9835BRU — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینAD9835BRU مشخصات
| Product Type | Direct Digital Synthesis IC |
| حداکثر فرکانس کلاک | 50 MHz |
| DAC Resolution | 10 bit |
| Frequency Tuning Word Resolution | 32 bit |
| Maximum Generated Sine-Wave Frequency | 25 MHz |
| ولتاژ تغذیه | 5 V |
| Power Consumption | 200 mW |
| نوع خروجی | Buffered analog sine-wave output |
| On-Chip Waveform Table | COS lookup table |
| Programming Interface | Serial interface |
| Modulation Capabilities | Frequency modulation and phase modulation |
| Power-Down Feature | Yes |
| بستهبندی | 16-lead TSSOP |
| Package Width | 4.40 mm |
راهنمای پیکربندی پین AD9835BRU 4.40 mm
پیکربندی پین برای AD9835BRU (پکیج 4.40 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای AD9835BRU.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
AD9835BRU مناسب است برای 6 کاربردs: DDS Frequency Tuning, Digital Demodulation, Communications Test Equipment, Frequency-Signal Generation, Phase-Modulated Waveform Source, Industrial Signal-Control Module.
DDS Frequency Tuning
The AD9835BRU fits DDS tuning because a 32-bit frequency tuning word provides detailed control over the generated frequency when referenced to a stable clock. The 50 MHz maximum clock and 10-bit on-chip DAC support sine-wave generation up to 25 MHz, while frequency and phase modulation allow the output to be adjusted without changing the external hardware. The designer calculates the required tuning word for the target frequency, loads it through the serial interface, and uses an external reconstruction filter to remove the DAC image components. Clock jitter, reference accuracy, and output filtering strongly influence phase noise and harmonic performance, so the clock source and filter must be designed together with the desired signal quality.
پیشنهادی
Digital Demodulation
The AD9835BRU can serve as the controllable reference source in a digital demodulation system, where a receiver generates a local signal at a programmed frequency and compares it with the incoming carrier. Its 32-bit tuning word, phase accumulator, and phase-modulation capability permit precise adjustment of frequency and phase relationships, while the 10-bit DAC produces the required sinusoidal reference. The generated output should be band-limited with an appropriate reconstruction filter and checked for compliance at the selected amplitude. This arrangement is useful when the demodulation controller already computes a tuning word and needs a compact alternative to a bank of fixed-frequency analog oscillators.
پیشنهادی
Communications Test Equipment
The AD9835BRU is suitable for generating adjustable test tones in communications equipment because frequency and phase can be changed through serial control rather than mechanical tuning. Its 50 MHz clock rating, 32-bit frequency tuning word, and 10-bit DAC support carrier and intermediate-frequency simulation, while phase modulation enables simple modulation tests. A laboratory instrument can use an external microcontroller to load new values and automate sweep sequences. The output filter, attenuation, and impedance matching network require careful design, particularly near the 25 MHz upper sine-wave limit, because quantization images and DAC compliance errors can degrade otherwise accurate measurements.
پیشنهادی
Frequency-Signal Generation
The AD9835BRU provides a compact way to create digitally synthesized sine signals for bench fixtures, sensor excitation, and signal-conditioning prototypes. Its single-chip architecture replaces a separate phase accumulator, waveform memory, and DAC, and the 5 V supply simplifies integration with conventional digital control logic. The 10-bit DAC establishes the available amplitude and linearity, so applications requiring low distortion may need careful output filtering and gain calibration. Stable reference-clock routing and short serial-control traces help maintain repeatable operation, while the power-down function allows the output stage to be disabled when the generator is not needed.
پیشنهادی
Phase-Modulated Waveform Source
The AD9835BRU is appropriate when a test source must vary phase as well as frequency because the device provides both phase and frequency modulation within its direct digital synthesis architecture. The 32-bit tuning word controls the base frequency, and the phase-adjust capability supports synchronized or offset waveforms. Designers can load settings through the serial interface and observe the filtered DAC output with external test equipment. Because phase accuracy is influenced by the reference clock and programming implementation, the controller should use deterministic updates and the analog path should preserve clock and control-signal integrity to avoid adding phase jitter.
پیشنهادی
Industrial Signal-Control Module
The AD9835BRU can form the signal-generation section of an industrial control module that produces a variable reference tone for downstream equipment. The serial interface allows a controller to update the operating frequency without mechanical adjustment, and the 16-lead TSSOP package supports compact board layouts. Its 5 V operating supply and approximately 200 mW stated power consumption are compatible with many embedded systems, although layout must preserve a low-noise supply and reference clock. The output should include appropriate attenuation, filtering, and protection before connecting to external equipment through long cables or high-impedance measurement circuits.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای AD9835BRU — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | 16-lead TSSOP |
| Brand | Analog Devices |
| Product Type | Direct Digital Synthesis IC |
| Maximum Clock Frequency | 50 MHz |
| DAC Resolution | 10 bit |
| Frequency Tuning Word | 32 bit |
| Maximum Generated Sine-Wave Frequency | 25 MHz |
| Supply Voltage | 5 V |
| Programming Interface | Serial |
| Modulation Support | Frequency modulation and phase modulation |
تفاوتهای کلیدی
- Single-chip programmable waveform generation (در مقابلDiscrete phase-accumulator, memory, and DAC implementations)
- Fine frequency programming resolution (در مقابلConventional fixed-frequency analog oscillators)
- Integrated modulation capability (در مقابلFixed-output sine-wave generators)
یادداشتهای طراحی
Route the reference clock to the AD9835BRU as a short, controlled-impedance trace and keep it away from the DAC output and reconstruction filter. A jittery or noisy reference clock directly degrades the generated phase noise and frequency stability. Provide a clean ground return and use the pin-description and layout guidance in the manufacturer datasheet when assigning the analog and digital return paths.
Place the AD9835BRU close to its reference clock, decoupling network, and output-reconstruction components to minimize trace area and unwanted coupling. The Analog Devices datasheet notes that the chip requires one reference clock, one low-precision resistor, and eight decoupling capacitors; follow the recommended component placement and values shown in the typical application circuits rather than substituting arbitrary networks.
Do not assume that the generated frequency alone guarantees a clean analog waveform. The 10-bit DAC produces quantized components that require an appropriate reconstruction filter, and the Analog Devices datasheet warns that specifications may not be met when the DAC output exceeds its specified compliance range. Check output amplitude and compliance before increasing gain or driving a downstream load.
اطلاعات انطباق
The manufacturer product page and datasheet results do not provide explicit compliance classifications in the retrieved text. The standard AD9835BRU is not identified as an automotive-qualified variant.