ADF4111BCPZ-RL7 - 1.4 GHz RF Clock Synthesizer | ADI
Référence : ADF4111BCPZ-RL7 ✓ ActifADF4111BCPZ-RL7 Présentation
A phase-locked loop, or PLL, is a closed-loop timing and frequency-control system. In a frequency synthesizer, a phase-frequency detector compares a divided reference signal with a feedback signal derived from the output. A precision charge pump then drives a loop filter, and the controlled oscillator or prescaler adjusts the output until the phase and frequency error is minimized. The ADF4110 family combines this feedback architecture with programmable counters for practical wireless frequency synthesis.
The ADF4111 family includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler identified as P/P+1. The A counter is 6 bits and the B counter is 13 bits. This architecture allows the reference and feedback paths to be divided under digital control so the synthesizer can produce a programmed output frequency.
The ADF4111BCPZ-RL7 is offered in a 20-lead LFCSP exposed-pad package and tape-and-reel ordering. Its compact surface-mount construction is intended for RF and microwave boards where component area is constrained. The exposed pad provides the primary thermal and electrical connection to the PCB, making careful pad layout, ground-plane integration, and thermal via placement essential parts of a successful implementation.
Typical uses include wireless receiver local oscillators, wireless transmitter local oscillators, up-conversion and down-conversion sections, RF signal-chain clocking, and communication equipment requiring programmable frequency generation. The synthesizer architecture is particularly useful when the system must derive a stable, programmable RF local-oscillator signal from a reference source.
A critical design consideration is loop-filter implementation. Component values in the charge-pump, reference, and feedback paths directly determine lock behavior, phase noise, reference spur performance, and the usable tuning bandwidth. Use the Analog Devices evaluation hardware and manufacturer application guidance to validate loop dynamics before committing the filter and board layout to production.
This page combines the manufacturer product information, package details, sourcing guidance, and application-focused engineering guidance for engineers evaluating the ADF4111BCPZ-RL7 as an RF clock and frequency synthesizer.
Alternatives de remplacement direct pour ADF4111BCPZ-RL7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ADF4110BCPZ-RL7
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ADF4111BCPZ-RL7 Spécifications
| Device Type | Clock/Frequency Synthesizer (RF) IC and single PLL |
| Maximum RF Operating Frequency | 1.4 GHz |
| RF Input Frequency Range | 5 MHz to 1.4 GHz |
| Maximum Stated Output Frequency | 165 MHz |
| Channel Count | 1 channel |
| Phase-Frequency Detector | Digital, low-noise |
| Charge Pump | Precision charge pump |
| A Counter | 6 bits |
| B Counter | 13 bits |
| Reference Divider | Programmable |
| Prescaler | Dual-modulus P/P+1 |
| Boîtier | 20-lead LFCSP with exposed pad |
| Package Dimensions | 6 mm x 6 mm |
| Type de montage | Surface mount |
Guide de configuration des broches du ADF4111BCPZ-RL7 6 mm x 6 mm
Configuration des broches du ADF4111BCPZ-RL7 (boîtier 6 mm x 6 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour ADF4111BCPZ-RL7.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ADF4111BCPZ-RL7 convient pour 6 applications: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Receiver Down-Conversion, Programmable RF Signal Source, RF Communication Test Equipment, Industrial RF Control Module.
Wireless Receiver Local Oscillator
The ADF4111BCPZ-RL7 is suited to generating a programmable local-oscillator signal in a wireless receiver. Its phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and P/P+1 prescaler provide the synthesis functions needed to derive a channel-related RF signal from a reference. With operation extending to 1.4 GHz, it offers useful frequency range for RF front ends. The principal design trade-off is that phase noise, reference spurs, and lock time depend strongly on the loop filter and PCB implementation, so validate those parameters with the manufacturer reference design before high-volume deployment.
Recommandé
Wireless Transmitter Up-Conversion
The ADF4111BCPZ-RL7 can provide the programmable local oscillator used in a wireless transmitter up-conversion chain. Its RF operating range reaches 1.4 GHz, while the programmable synthesis architecture allows channel selection without changing the reference source. The device is placed within the feedback loop between the reference input and the RF output, with a charge-pump loop filter controlling frequency correction. Designers should compare phase noise and spur levels against transmitter mask and adjacent-channel requirements. Keep reference and feedback routing compact, and use the Analog Devices evaluation platform to characterize lock behavior before finalizing component values.
Recommandé
Receiver Down-Conversion
The ADF4111BCPZ-RL7 is appropriate for a programmable down-conversion local oscillator in a wireless receiver. Its single synthesized channel can be tuned through the divider network while its RF operating capability reaches 1.4 GHz. The precision charge pump and digital phase-frequency detector support closed-loop frequency correction against the system reference, while the dual-modulus P/P+1 prescaler provides flexibility in the feedback division scheme. A practical design must account for reference translation noise, filter-induced phase noise, and the spur performance of the selected counter ratios. Use short RF paths and a controlled reference distribution to preserve synthesizer performance.
Recommandé
Programmable RF Signal Source
The ADF4111BCPZ-RL7 can serve as the core of a programmable RF signal source when a stable reference and closed-loop tuning are required. The 1.4 GHz maximum RF frequency, programmable A and B counters, programmable reference divider, and P/P+1 prescaler provide multiple frequency-plan options. Compared with a free-running oscillator, the PLL architecture can improve frequency stability by continuously referencing the output to the external source. The design trade-off is added loop bandwidth, filter-component sensitivity, and phase-noise contributions. Select loop bandwidth for the required settling time and capture behavior rather than optimizing only for the lowest achievable in-band phase noise.
Recommandé
RF Communication Test Equipment
The ADF4111BCPZ-RL7 can support programmable RF excitation in communication test equipment where a compact, reference-based frequency source is required. Its operation up to 1.4 GHz permits synthesis across a substantial portion of the RF test range, while digital counter programming simplifies automated channel selection. The synthesizer must be paired with a low-noise reference, appropriate output matching, and a carefully designed loop filter. For instrument-grade results, evaluate phase noise, spur levels, settling time, and output power across the complete operating range. A shielded board layout with controlled grounding is preferable to relying on temporary evaluation wiring.
Recommandé
Industrial RF Control Module
The ADF4111BCPZ-RL7 can support frequency generation in industrial RF modules where a predictable, reference-derived local oscillator is required. Its single-channel architecture, programmable division network, and 1.4 GHz maximum RF frequency suit compact communication and control subsystems. The exposed-pad LFCSP package helps support compact placement but requires adequate copper and thermal-via design. For factory or outdoor equipment, validate temperature margins, reference stability, and regulator noise at the intended rail conditions. Digital programming should use a stable serial interface and include defined power-up states so the PLL is configured consistently after reset.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADF4111BCPZ-RL7 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADF4110BCPZ-RL7 |
|---|---|---|
| Package | 20-lead LFCSP with exposed pad | 20-lead LFCSP with exposed pad |
| Brand | Analog Devices | Analog Devices |
| Product Type | Single-channel RF frequency synthesizer and PLL | ADF4110-family RF frequency synthesizer and PLL |
| A Counter | 6 bits | 6 bits |
| B Counter | 13 bits | 13 bits |
| Prescaler | Dual-modulus P/P+1 | Dual-modulus P/P+1 |
| Channel Count | 1 channel | 1 channel |
Principaux différenciateurs
- Higher stated RF operating ceiling (vs ADF4110BCPZ-RL7)
- Direct frequency-plan support (vs ADF4110BCPZ-RL7)
- Common compact package architecture (vs ADF4110BCPZ-RL7)
Notes de conception
Implement the 20-lead LFCSP land pattern from the manufacturer package drawing, including the exposed-pad dimensions and thermal-via arrangement. Connect the exposed pad to the intended ground or supply plane only as specified by the Analog Devices layout guidance. Place the reference input, charge-pump output, feedback divider, and loop-filter components close to their associated pins to minimize parasitic inductance and improve phase-noise behavior.
Provide a clean, low-noise supply to the charge pump and synthesizer circuitry, and decouple each supply pin according to the manufacturer application circuit. Reference and supply decoupling should be evaluated separately because reference phase noise and charge-pump supply noise can both degrade close-in phase noise. Keep power routing away from sensitive feedback nodes and verify startup behavior when the reference is absent or outside its specified operating range.
Do not select the loop-filter values from the output frequency alone. The calculation must include the reference frequency, prescaler, A and B counter values, desired lock time, and allowable phase noise. Also check every integer division ratio against the permitted P/P+1 prescaler combinations; a numerically attractive ratio can be invalid if the prescaler constraint is not respected. Validate the final design on the manufacturer evaluation board.
The exposed thermal pad is the principal heat-transfer path for the 20-lead LFCSP. Use the package drawing and manufacturer layout guidance for thermal-via geometry and copper area, and inspect solder coverage after assembly. High phase-noise performance and stable tuning can be affected by temperature gradients or assembly-induced stress, so keep the synthesizer's reference source and critical analog components thermally separated where practical.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact orderable MPN appears in the cited product information. Confirm compliance using the current Analog Devices product documentation and declaration for ADF4111BCPZ-RL7.