Analog Devices

ADF4111BCPZ-RL7 - 1.4 GHz RF Clock Synthesizer | ADI

料号: ADF4111BCPZ-RL7 ✓ 量产中
20-lead LFCSP with exposed pad Package 1.4 GHz Speed
最小起订量: 1 |

ADF4111BCPZ-RL7 概述

Analog Devices ADF4111BCPZ-RL7 is a single-channel RF frequency synthesizer and phase-locked-loop IC with a maximum stated operating frequency of 1.4 GHz, packaged in a 20-lead LFCSP with exposed pad. Its radio-frequency input range is listed as 5 MHz to 1.4 GHz, while the cited output frequency reaches 165 MHz. The device is designed for frequency generation and local-oscillator implementations in wireless receivers and transmitters.

A phase-locked loop, or PLL, is a closed-loop timing and frequency-control system. In a frequency synthesizer, a phase-frequency detector compares a divided reference signal with a feedback signal derived from the output. A precision charge pump then drives a loop filter, and the controlled oscillator or prescaler adjusts the output until the phase and frequency error is minimized. The ADF4110 family combines this feedback architecture with programmable counters for practical wireless frequency synthesis.

The ADF4111 family includes a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler identified as P/P+1. The A counter is 6 bits and the B counter is 13 bits. This architecture allows the reference and feedback paths to be divided under digital control so the synthesizer can produce a programmed output frequency.

The ADF4111BCPZ-RL7 is offered in a 20-lead LFCSP exposed-pad package and tape-and-reel ordering. Its compact surface-mount construction is intended for RF and microwave boards where component area is constrained. The exposed pad provides the primary thermal and electrical connection to the PCB, making careful pad layout, ground-plane integration, and thermal via placement essential parts of a successful implementation.

Typical uses include wireless receiver local oscillators, wireless transmitter local oscillators, up-conversion and down-conversion sections, RF signal-chain clocking, and communication equipment requiring programmable frequency generation. The synthesizer architecture is particularly useful when the system must derive a stable, programmable RF local-oscillator signal from a reference source.

A critical design consideration is loop-filter implementation. Component values in the charge-pump, reference, and feedback paths directly determine lock behavior, phase noise, reference spur performance, and the usable tuning bandwidth. Use the Analog Devices evaluation hardware and manufacturer application guidance to validate loop dynamics before committing the filter and board layout to production.

This page combines the manufacturer product information, package details, sourcing guidance, and application-focused engineering guidance for engineers evaluating the ADF4111BCPZ-RL7 as an RF clock and frequency synthesizer.

直接替换替代料: ADF4111BCPZ-RL7 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

ADF4110BCPZ-RL7

✅ 直接替换
Analog Devices
📦 20-lead LFCSP with exposed pad
Single integer-N RF PLL frequency synthesizer · 550 MHz · Integer-N phase-locked loop · Programmable dual-modulus P/P+1 prescaler · 6-bit programmable counter · 13-bit programmable counter · Programmable divider · Low-noise digital phase-frequency detector

联系询价

查看数据手册 →

ADF4111BCPZ-RL7 规格参数

Device Type Clock/Frequency Synthesizer (RF) IC and single PLL
Maximum RF Operating Frequency 1.4 GHz
RF Input Frequency Range 5 MHz to 1.4 GHz
Maximum Stated Output Frequency 165 MHz
Channel Count 1 channel
Phase-Frequency Detector Digital, low-noise
Charge Pump Precision charge pump
A Counter 6 bits
B Counter 13 bits
Reference Divider Programmable
Prescaler Dual-modulus P/P+1
封装 20-lead LFCSP with exposed pad
Package Dimensions 6 mm x 6 mm
安装类型 Surface mount

ADF4111BCPZ-RL7 6 mm x 6 mm 引脚配置指南

ADF4111BCPZ-RL7(6 mm x 6 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

ADF4111BCPZ-RL7 的 6 mm x 6 mm 封装引脚图

暂无详细引脚数据: ADF4111BCPZ-RL7.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ADF4111BCPZ-RL7 适用于 6 应用s: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Receiver Down-Conversion, Programmable RF Signal Source, RF Communication Test Equipment, Industrial RF Control Module.

🌐

Wireless Receiver Local Oscillator

The ADF4111BCPZ-RL7 is suited to generating a programmable local-oscillator signal in a wireless receiver. Its phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and P/P+1 prescaler provide the synthesis functions needed to derive a channel-related RF signal from a reference. With operation extending to 1.4 GHz, it offers useful frequency range for RF front ends. The principal design trade-off is that phase noise, reference spurs, and lock time depend strongly on the loop filter and PCB implementation, so validate those parameters with the manufacturer reference design before high-volume deployment.

📡

Wireless Transmitter Up-Conversion

The ADF4111BCPZ-RL7 can provide the programmable local oscillator used in a wireless transmitter up-conversion chain. Its RF operating range reaches 1.4 GHz, while the programmable synthesis architecture allows channel selection without changing the reference source. The device is placed within the feedback loop between the reference input and the RF output, with a charge-pump loop filter controlling frequency correction. Designers should compare phase noise and spur levels against transmitter mask and adjacent-channel requirements. Keep reference and feedback routing compact, and use the Analog Devices evaluation platform to characterize lock behavior before finalizing component values.

📻

Receiver Down-Conversion

The ADF4111BCPZ-RL7 is appropriate for a programmable down-conversion local oscillator in a wireless receiver. Its single synthesized channel can be tuned through the divider network while its RF operating capability reaches 1.4 GHz. The precision charge pump and digital phase-frequency detector support closed-loop frequency correction against the system reference, while the dual-modulus P/P+1 prescaler provides flexibility in the feedback division scheme. A practical design must account for reference translation noise, filter-induced phase noise, and the spur performance of the selected counter ratios. Use short RF paths and a controlled reference distribution to preserve synthesizer performance.

⚙️

Programmable RF Signal Source

The ADF4111BCPZ-RL7 can serve as the core of a programmable RF signal source when a stable reference and closed-loop tuning are required. The 1.4 GHz maximum RF frequency, programmable A and B counters, programmable reference divider, and P/P+1 prescaler provide multiple frequency-plan options. Compared with a free-running oscillator, the PLL architecture can improve frequency stability by continuously referencing the output to the external source. The design trade-off is added loop bandwidth, filter-component sensitivity, and phase-noise contributions. Select loop bandwidth for the required settling time and capture behavior rather than optimizing only for the lowest achievable in-band phase noise.

🖥️

RF Communication Test Equipment

The ADF4111BCPZ-RL7 can support programmable RF excitation in communication test equipment where a compact, reference-based frequency source is required. Its operation up to 1.4 GHz permits synthesis across a substantial portion of the RF test range, while digital counter programming simplifies automated channel selection. The synthesizer must be paired with a low-noise reference, appropriate output matching, and a carefully designed loop filter. For instrument-grade results, evaluate phase noise, spur levels, settling time, and output power across the complete operating range. A shielded board layout with controlled grounding is preferable to relying on temporary evaluation wiring.

🏭

Industrial RF Control Module

The ADF4111BCPZ-RL7 can support frequency generation in industrial RF modules where a predictable, reference-derived local oscillator is required. Its single-channel architecture, programmable division network, and 1.4 GHz maximum RF frequency suit compact communication and control subsystems. The exposed-pad LFCSP package helps support compact placement but requires adequate copper and thermal-via design. For factory or outdoor equipment, validate temperature margins, reference stability, and regulator noise at the intended rail conditions. Digital programming should use a stable serial interface and include defined power-up states so the PLL is configured consistently after reset.

What is the ADF4111BCPZ-RL7?
The ADF4111BCPZ-RL7 is a single-channel RF frequency synthesizer with an integrated phase-locked loop, programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. According to the Analog Devices ADF4111 product page, the ADF4110 family is intended for local oscillators in wireless receiver and transmitter up-conversion and down-conversion circuits. The device is supplied in a 20-lead LFCSP with exposed pad.
What is the operating frequency of ADF4111BCPZ-RL7?
The ADF4111BCPZ-RL7 operates up to 1.4 GHz for RF synthesis, and the listed RF input range extends from 5 MHz to 1.4 GHz. The corresponding listing also identifies a maximum stated output frequency of 165 MHz. These frequency figures describe the advertised operating limits; the actual lock range and usable output depend on the reference frequency, counter settings, prescaler, loop filter, and board implementation.
Where can I download the ADF4111BCPZ-RL7 datasheet?
The official ADF4111 product information and datasheet are available through the Analog Devices product page linked on this page. The manufacturer documentation describes the phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus P/P+1 prescaler. Use the manufacturer document for electrical limits, register definitions, reference-divider ratios, timing, and the recommended application circuit.
Where can I find the ADF4111BCPZ-RL7 pinout?
The ADF4111BCPZ-RL7 pin assignments are shown in the Analog Devices ADF4111 datasheet and its package drawing. This 20-lead LFCSP includes an exposed thermal pad that must be connected according to the manufacturer layout guidance. Use the pin-description table and land pattern in the manufacturer documentation when assigning PCB tracks or defining the footprint; a generic package image should not be used to infer signal names.
What are the key specifications of ADF4111BCPZ-RL7?
The principal ADF4111BCPZ-RL7 specifications are a 1.4 GHz maximum RF frequency, a 5 MHz to 1.4 GHz RF input range, a stated maximum output frequency of 165 MHz, one synthesis channel, and a 20-lead LFCSP exposed-pad package. Its frequency-generation architecture combines a digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus P/P+1 prescaler.
Is the ADF4111BCPZ-RL7 suitable for wireless local oscillators?
Yes, the ADF4111BCPZ-RL7 is specifically suited to programmable local-oscillator generation in wireless receivers and transmitters. The Analog Devices product page identifies the up-conversion and down-conversion sections of wireless systems as principal applications for the ADF4110 family. Its programmable counters and reference divider let a designer translate a stable reference source into the required channel frequency when the loop and board implementation meet the required phase-noise and spur objectives.
ADF4111BCPZ-RL7 vs ADF4110BCPZ-RL7: which is better?
Choose the ADF4111BCPZ-RL7 when the design needs its 1.4 GHz maximum RF frequency, while the ADF4110BCPZ-RL7 is the lower-frequency member of the same synthesizer family. The device-level comparison pages identify both parts within the ADF4110 family and its shared programmable-counter, phase-detector, charge-pump, and prescaler architecture. Confirm the required channel frequency, reference plan, loop filter, and pin-compatible ordering option in the manufacturer datasheet before substitution.
When should I choose ADF4111BCPZ-RL7 instead of ADF4110BCPZ-RL7?
Choose ADF4111BCPZ-RL7 when the required RF synthesis range extends beyond the ADF4110 member's operating capability and reaches toward 1.4 GHz. The ADF4111BCPZ-RL7 retains the same ADF4110-family architecture and offers programmable reference, A-counter, B-counter, and P/P+1 prescaler paths. For lower-frequency designs, the ADF4110BCPZ-RL7 may be sufficient, but the final choice should follow the highest required channel, reference-divider ratio, and lock-bandwidth analysis.
What is the best drop-in replacement for ADF4111BCPZ-RL7?
The ADF4110BCPZ-RL7 is the closest supported same-family replacement candidate identified by the product-comparison information, but it has a lower frequency capability and should only be selected when the target design remains inside its operating range. The ADF4111BCPZ also has the same electrical package, with the ordering suffix distinguishing assembly format. Confirm pinout, exposed-pad layout, frequency limits, register behavior, and thermal requirements against the manufacturer datasheet before replacing the fitted device.
Can ADF4110BCPZ-RL7 replace ADF4111BCPZ-RL7?
The ADF4110BCPZ-RL7 can replace the ADF4111BCPZ-RL7 only when the circuit does not require the higher-frequency capability of the ADF4111. Both are identified as members of the ADF4110 family, but their operating-frequency limits are not equivalent. Validate every synthesized channel against the replacement's maximum frequency, then review the register map, reference settings, prescaler options, loop filter, exposed-pad layout, and production test requirements.
What can replace ADF4111BCPZ-RL7?
ADF4110BCPZ-RL7 is the principal same-family replacement candidate found for ADF4111BCPZ-RL7, while ADF4111BCPZ represents the same electrical device in a different ordering format. A true drop-in choice must preserve the 20-lead exposed-pad footprint, pin functions, register interface, supply behavior, and required RF frequency range. No cross-manufacturer drop-in replacement was established from the available comparison information, so redesign of the frequency plan or PCB should not be assumed.
Is ADF4111BCPZ-RL7 in stock and what is the lead time?
Current stock and a production lead time should be requested through the Request a Quote form on this page. The product is listed by multiple supply channels, but a listing's presence does not guarantee an immediate allocation, the requested package format, or a factory lead time. Include the exact MPN, target quantity, and required delivery date so the current availability and lead time can be confirmed for the order.
Where can I buy ADF4111BCPZ-RL7 online?
Use the Request a Quote form on this page to request ADF4111BCPZ-RL7 availability and a current quotation. Provide the exact 20-lead LFCSP exposed-pad ordering code and the quantity required. The exact package, tape-and-reel format, date codes, and delivery schedule should all be confirmed before procurement, particularly for production builds that require traceable sourcing or scheduled delivery.
What is the price of ADF4111BCPZ-RL7?
The current commercial price for ADF4111BCPZ-RL7 should be obtained through the Request a Quote form on this page. The form allows quantity, delivery requirements, and any production-sourcing constraints to be considered together. This approach avoids presenting a stale promotional amount as a firm quotation and supports confirmation against the exact MPN, exposed-pad package, and tape-and-reel ordering format.
How should the ADF4111BCPZ-RL7 loop filter be designed?
The loop filter should be designed from the target reference frequency, channel-plan ratio, charge-pump setting, prescaler, desired lock time, and phase-noise requirement. According to the Analog Devices ADF4111 product page, the device uses a phase-frequency detector, precision charge pump, programmable counters, and P/P+1 prescaler, making loop dynamics a central design consideration. Validate the calculated values with the manufacturer's evaluation setup before production release.
Does the ADF4111BCPZ-RL7 require special PCB layout for its exposed pad?
Yes, the 20-lead LFCSP exposed pad requires careful PCB design for both electrical performance and heat removal. Follow the Analog Devices land-pattern and layout guidance for pad dimensions, solder-mask clearance, thermal-via configuration, and ground-plane connection. Place the feedback and filter components close to their associated pins, maintain short return paths, and inspect the assembled package because voiding under a large exposed pad can increase thermal resistance.
Is the ADF4111BCPZ-RL7 RoHS compliant or automotive qualified?
The RoHS and REACH status of ADF4111BCPZ-RL7 must be confirmed from the current Analog Devices product documentation or declaration of compliance. Its automotive qualification status is likewise not established by the frequency-synthesizer listings. The part is primarily a wireless RF clock-generation device, so do not infer AEC-Q100 qualification from its package or operating frequency. Obtain the specific compliance statement for the exact orderable MPN before using it in a regulated or automotive design.

工程参考数据: ADF4111BCPZ-RL7 ——对比、设计指导和合规信息。

选型指南

Choose the ADF4111BCPZ-RL7 when a wireless receiver, transmitter, RF signal source, or test module requires programmable synthesis extending to the family's 1.4 GHz RF ceiling. Its digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and P/P+1 prescaler make it appropriate for reference-derived local-oscillator generation. The ADF4110BCPZ-RL7 is the closer same-family option when its lower operating ceiling covers every required channel and the shared package can be reused. It should not be selected merely because it has a similar family name; review its frequency limits and loop requirements. No verified cross-manufacturer drop-in equivalent was established, so a different vendor's PLL may require different programming, filtering, or PCB changes. For either device, validate phase noise, spurs, lock time, reference sensitivity, and exposed-pad thermal performance before production release.

与替代料对比

参数 本产品 ADF4110BCPZ-RL7
Package 20-lead LFCSP with exposed pad 20-lead LFCSP with exposed pad
Brand Analog Devices Analog Devices
Product Type Single-channel RF frequency synthesizer and PLL ADF4110-family RF frequency synthesizer and PLL
A Counter 6 bits 6 bits
B Counter 13 bits 13 bits
Prescaler Dual-modulus P/P+1 Dual-modulus P/P+1
Channel Count 1 channel 1 channel

关键差异点

  • Higher stated RF operating ceiling (对比 ADF4110BCPZ-RL7)
  • Direct frequency-plan support (对比 ADF4110BCPZ-RL7)
  • Common compact package architecture (对比 ADF4110BCPZ-RL7)

设计说明

Implement the 20-lead LFCSP land pattern from the manufacturer package drawing, including the exposed-pad dimensions and thermal-via arrangement. Connect the exposed pad to the intended ground or supply plane only as specified by the Analog Devices layout guidance. Place the reference input, charge-pump output, feedback divider, and loop-filter components close to their associated pins to minimize parasitic inductance and improve phase-noise behavior.

Provide a clean, low-noise supply to the charge pump and synthesizer circuitry, and decouple each supply pin according to the manufacturer application circuit. Reference and supply decoupling should be evaluated separately because reference phase noise and charge-pump supply noise can both degrade close-in phase noise. Keep power routing away from sensitive feedback nodes and verify startup behavior when the reference is absent or outside its specified operating range.

Do not select the loop-filter values from the output frequency alone. The calculation must include the reference frequency, prescaler, A and B counter values, desired lock time, and allowable phase noise. Also check every integer division ratio against the permitted P/P+1 prescaler combinations; a numerically attractive ratio can be invalid if the prescaler constraint is not respected. Validate the final design on the manufacturer evaluation board.

The exposed thermal pad is the principal heat-transfer path for the 20-lead LFCSP. Use the package drawing and manufacturer layout guidance for thermal-via geometry and copper area, and inspect solder coverage after assembly. High phase-noise performance and stable tuning can be affected by temperature gradients or assembly-induced stress, so keep the synthesizer's reference source and critical analog components thermally separated where practical.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact orderable MPN appears in the cited product information. Confirm compliance using the current Analog Devices product documentation and declaration for ADF4111BCPZ-RL7.

相关搜索

ADF4111BCPZ-RL7 datasheet ADF4111BCPZ-RL7 pinout ADF4111BCPZ-RL7 datasheet pdf ADF4111BCPZ-RL7 equivalent ADF4111BCPZ-RL7 replacement ADF4111BCPZ-RL7 price ADF4111BCPZ-RL7 stock ADF4111BCPZ-RL7 vs ADF4110BCPZ-RL7 ADF4111BCPZ-RL7 footprint ADF4111BCPZ-RL7 application circuit ADF4111 1.4 GHz PLL ADF4111 20-LFCSP synthesizer

相关元器件 & 术语

Analog Devices ADF4111BCPZ-RL7 ADF4110BCPZ-RL7 ADF4110 family frequency synthesizer phase-locked loop PLL RF clock generator digital phase-frequency detector precision charge pump programmable reference divider A counter B counter dual-modulus P/P+1 prescaler local oscillator wireless receiver wireless transmitter up-conversion down-conversion loop filter phase noise reference spur 20-lead LFCSP LFCSP family exposed pad surface mount RF frequency synthesis Analog Devices ADF4111 product page
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情