Analog Devices

ADF41513BCPZ - 26.5 GHz Fractional-N PLL Synthesizer | Analog Devices

Référence : ADF41513BCPZ ✓ Actif
24-lead WFQFN with exposed pad Package 26.5 GHz Speed
MOQ : 1 |

ADF41513BCPZ Présentation

Analog Devices ADF41513BCPZ is an integer-N and fractional-N PLL frequency synthesizer capable of generating local-oscillator signals as high as 26.5 GHz. It uses a high-performance SiGe BiCMOS process and is packaged in a 24-lead WFQFN package with an exposed pad. Its normalized phase-noise floor is -235 dBc/Hz, while the phase-frequency detector supports operation up to 250 MHz in integer-N mode and 125 MHz in fractional-N mode.

A PLL frequency synthesizer belongs to the clock-and-timing IC hierarchy, where it combines a phase-locked loop, programmable frequency dividers, a phase-frequency detector, and a voltage-controlled oscillator with an integrated or external resonator. In a wireless transmitter or receiver, the ADF41513 can synthesize coherent local-oscillator signals needed by upconversion and downconversion stages. Its fractional-N operation supports fine frequency resolution while retaining high reference-channel rates for improved phase-noise and spur performance.

The device supports both integer-N and fractional-N synthesis, giving designers flexibility between exact integer multiplication and fine fractional frequency control. The maximum PFD rate is 250 MHz in integer-N mode and 125 MHz in fractional-N mode. Its -235 dBc/Hz normalized phase-noise floor is particularly useful in receiver and transmitter signal chains where close-in phase noise can affect modulation fidelity, receiver selectivity, and transmitter signal quality.

ADF41513BCPZ is used for wireless receiver and transmitter local oscillators, microwave downconversion, microwave upconversion, test and measurement equipment, and instrumentation requiring programmable RF output. The manufacturer describes the family as an ultralow-noise frequency synthesizer capable of operating as high as 26.5 GHz.

The principal PCB concern is high-frequency isolation. The manufacturer datasheet notes that reference-switching noise can feed through the RFINA or RFINB pins and return to the VCO, potentially producing reference spurs as high as -90 dBc. Keep reference and VCO routing separated, use controlled impedance, and preserve a continuous ground return beneath RF traces.

This product page combines the verified manufacturer specifications with sourcing guidance, replacement analysis, and practical RF layout considerations. The ADF41513BCPZ is appropriate when an adjustable fractional-N synthesizer is required, but the complete pin description, programming interface, and detailed electrical limits must be taken from the Analog Devices ADF41513 datasheet before schematic capture and PCB release.

Alternatives de remplacement direct pour ADF41513BCPZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADF41513BCPZ (même facteur de forme et même empreinte) — différant par Package, Device Type, Maximum RF Output Frequency.

Analog Devices
Package: 20-lead WFQFN with exposed pad
Device Type: Fractional-N frequency synthesizer
Maximum RF Output Frequency: 4 GHz
Comparer avec ADF41513BCPZ →
Analog Devices
Package: 24-lead WFQFN exposed-pad CSP
Comparer avec ADF41513BCPZ →

ADF4159CCPZ

✅ Remplacement direct
Analog Devices
📦 24-WFQFN with exposed pad
Fractional-N frequency synthesizer with modulation and waveform generation · 13 GHz · 25 bit · Subhertz · 110 MHz · CMOS · CMOS · 1 output

Contactez-nous pour le prix

Voir la fiche technique →

ADF4154BCPZ

✅ Remplacement direct
Analog Devices
📦 24-WFQFN with exposed pad
Fractional-N frequency synthesizer · 4 GHz · 500 MHz · 2.7 V to 3.3 V · 2.7 V to 3.3 V · 2.7 V to 3.3 V · AVDD to 5.5 V · 4/5 and 8/9

Contactez-nous pour le prix

Voir la fiche technique →

ADF41513BCPZ Spécifications

Device Type Integer-N/Fractional-N PLL frequency synthesizer
Maximum RF Output Frequency 26.5 GHz
Normalized Phase Noise Floor -235 dBc/Hz
PFD Maximum Frequency, Integer-N Mode 250 MHz
PFD Maximum Frequency, Fractional-N Mode 125 MHz
Process Technology SiGe BiCMOS
Synthesizer Mode Integer-N and fractional-N
Boîtier 24-lead WFQFN with exposed pad
Type de montage Surface mount

Guide de configuration des broches du ADF41513BCPZ 24-lead wfqfn with exposed pad

Configuration des broches du ADF41513BCPZ (boîtier 24-lead wfqfn with exposed pad). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 24-lead wfqfn with exposed pad pour le ADF41513BCPZ

Aucune donnée de brochage détaillée disponible pour ADF41513BCPZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADF41513BCPZ convient pour 6 applications: Wireless Receiver Local Oscillator, Microwave Transmitter Upconversion, Microwave Receiver Downconversion, RF Test and Measurement Equipment, Instrumentation and Signal Analysis, Clock Generation and Jitter Management.

🌐

Wireless Receiver Local Oscillator

The ADF41513BCPZ fits a programmable wireless receiver local oscillator because it supports RF synthesis up to 26.5 GHz and integer-N and fractional-N operating modes. The -235 dBc/Hz normalized phase-noise floor provides a strong starting point for close-in phase-noise-sensitive receiver architectures. Place the synthesizer reference, VCO, charge pump, and loop-filter networks according to the manufacturer layout guidance, while isolating reference switching paths from sensitive RF routes. Final phase-noise and spur performance still depend on the external VCO, reference oscillator, loop bandwidth, output frequency, and PCB implementation.

📡

Microwave Transmitter Upconversion

The ADF41513BCPZ can generate a programmable local-oscillator signal for microwave transmitter upconversion up to the 26.5 GHz maximum supported frequency. Fractional-N operation is useful when the target frequency requires finer synthesis granularity, while the high PFD-rate capability can support low-noise loop designs in appropriate operating modes. The designer must account for output-divider limits, VCO tuning range, reference harmonics, and unwanted coupling into the RF output path. PCB isolation and controlled impedance are particularly important when the synthesizer shares space with a high-power transmit chain.

🌐

Microwave Receiver Downconversion

For microwave downconversion, the ADF41513BCPZ provides a programmable low-noise local-oscillator source covering frequencies as high as 26.5 GHz. The -235 dBc/Hz normalized phase-noise floor helps characterize designs where close-in oscillator noise could degrade receiver sensitivity or adjacent-channel performance. Use integer-N mode when an exact integer multiplication ratio is sufficient, or fractional-N mode when finer frequency resolution is required. The loop filter, external VCO, crystal or reference source, and RF routing determine the final phase-noise and spur performance.

🖥️

RF Test and Measurement Equipment

The ADF41513BCPZ is suitable for programmable RF test equipment that needs a synthesized local-oscillator signal across the microwave range. Its output can reach 26.5 GHz, and integer-N and fractional-N modes support different resolution and spur-management strategies. A laboratory source still requires accurate calibration, low-noise references, stable output-divider settings, and careful grounding to achieve repeatable phase-noise measurements. The exposed pad must be tied to the appropriate thermal and electrical ground plane according to the package guidance.

📺

Instrumentation and Signal Analysis

The ADF41513BCPZ can supply a coherent, programmable RF source for instrumentation and signal-analysis systems where a fixed oscillator is insufficient. The integer-N and fractional-N architecture allows the instrument firmware to select an appropriate output-divider and feedback configuration for each test frequency. The -235 dBc/Hz normalized phase-noise figure gives designers a common benchmark for comparison with other synthesizers. In practice, reference phase noise, loop-filter component tolerances, VCO tuning sensitivity, and PCB isolation determine whether the instrument meets its measurement floor.

⚡

Clock Generation and Jitter Management

ADF41513BCPZ can be used as a programmable high-frequency clock source when the system requires frequency agility and fractional resolution beyond a fixed oscillator. The device supports RF output frequencies as high as 26.5 GHz and PFD rates up to 250 MHz in integer-N mode, subject to the complete operating conditions in the datasheet. Designers should preserve the recommended power and ground connections, decouple supply pins locally, and keep noisy digital programming activity away from sensitive reference and VCO nodes. Firmware must configure the divider and sigma-delta parameters correctly for stable phase-noise and spur performance.

What is the operating frequency of the ADF41513BCPZ?
The ADF41513BCPZ supports RF synthesis up to 26.5 GHz. According to the Analog Devices ADF41513 product page, the device is an ultralow-noise frequency synthesizer intended for local oscillators in the upconversion and downconversion sections of wireless receivers and transmitters. The 26.5 GHz figure is the maximum supported RF output, while the lowest selectable output depends on the configured RF output dividers and reference arrangement described in the manufacturer datasheet.
What are the key specifications of ADF41513BCPZ that engineers should know?
The ADF41513BCPZ is a 26.5 GHz integer-N and fractional-N PLL frequency synthesizer with a -235 dBc/Hz normalized phase-noise floor. According to the Analog Devices ADF41513 datasheet, its phase-frequency detector operates up to 250 MHz in integer-N mode and 125 MHz in fractional-N mode. The device uses a SiGe BiCMOS process and is offered in the target configuration as a 24-lead WFQFN package with an exposed pad.
Where can I download the ADF41513BCPZ datasheet PDF?
The official ADF41513BCPZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/adf41513.pdf. It is the primary document for the complete pin-description table, register map, electrical characteristics, reference and RF input requirements, output-divider settings, power-supply recommendations, and layout guidance. Use the ADF41513 family datasheet together with the ordering information for the exact BCPZ package suffix.
Where can I find the ADF41513BCPZ pinout?
The ADF41513BCPZ pin assignments are shown in the pin-description table and package drawing in the official Analog Devices ADF41513 datasheet. The target device uses a 24-lead WFQFN package with an exposed pad. Consult the datasheet for signal names, analog and digital supply pins, reference inputs, RF inputs, charge-pump and loop-filter connections, ground connections, and the exposed-pad connection before assigning PCB nets.
What is the difference between integer-N and fractional-N mode in ADF41513BCPZ?
Integer-N mode produces an output determined by integer feedback-divider ratios, while fractional-N mode uses a sigma-delta fractional modulator to achieve finer frequency resolution. The Analog Devices ADF41513 datasheet identifies a maximum PFD frequency of 250 MHz in integer-N mode and 125 MHz in fractional-N mode. Integer-N operation is useful when an exact integer ratio is sufficient; fractional-N operation is useful when the required output frequency must be synthesized more precisely.
What does -235 dBc/Hz normalized phase noise mean for ADF41513BCPZ?
The -235 dBc/Hz specification is the ADF41513 family's normalized phase-noise floor, a figure-of-merit measure used to compare synthesizer performance across different operating conditions. According to the Analog Devices ADF41513 datasheet, the device is designed on a high-performance SiGe BiCMOS process to achieve this floor. Actual close-in and offset phase noise depends on PFD rate, loop bandwidth, output frequency, VCO performance, and reference quality.
Where can I buy ADF41513BCPZ online?
Use the Request a Quote form on this page to request ADF41513BCPZ availability, current pricing, lot consistency, and order handling. The exact MPN is a 24-lead WFQFN with exposed pad configuration. Because availability and commercial terms can change with inventory and order volume, request the quantity, target date, and packaging requirements directly through the quote workflow rather than relying on a static listing.
What is the price of ADF41513BCPZ?
Current ADF41513BCPZ pricing is provided through the Request a Quote form on this page. Quote requests should specify the required quantity, delivery date, and whether reel or cut-tape presentation is needed. The product is an exact-match 26.5 GHz integer-N and fractional-N PLL frequency synthesizer in a 24-lead WFQFN package, so requests for a different suffix should be treated as a separate part-number requirement.
What is the lead time for ADF41513BCPZ?
The current lead time for ADF41513BCPZ should be confirmed through the Request a Quote form on this page. Include the required order quantity, shipment date, and acceptable reel or cut-tape packaging. For production planning, also identify whether the design must be locked to the 26.5 GHz maximum RF output, fractional-N operation, and the 24-lead WFQFN exposed-pad package before accepting the schedule.
Is ADF41513BCPZ in stock?
Stock status for ADF41513BCPZ changes with order volume and inventory, so use the Request a Quote form on this page for the current allocation. The quote request should identify the exact MPN, quantity, and packaging format. Distributor listings can indicate availability at a particular moment, but they are not a guarantee of allocation for a production quantity or a specific delivery date.
Is ADF41513BCPZ suitable for wireless receiver local oscillators?
The ADF41513BCPZ is suitable for wireless receiver local oscillators because the Analog Devices product page identifies receiver and transmitter upconversion and downconversion as primary applications. Its 26.5 GHz maximum output supports microwave and millimeter-wave signal chains, while the -235 dBc/Hz normalized phase-noise floor is valuable for close-in phase-noise control. Final suitability depends on required spur floor, tuning range, loop-filter design, and reference phase noise.
ADF41513BCPZ vs ADF4159CCPZ: which is better for a microwave receiver?
Choose ADF41513BCPZ when the design benefits from its 26.5 GHz maximum RF output and -235 dBc/Hz normalized phase-noise floor for a low-noise microwave local oscillator. Choose ADF4159CCPZ only after confirming its RF range, tuning behavior, register map, reference requirements, and pin assignments against the receiver requirements. Both are Analog Devices integer-N/fractional-N synthesizer families, but a shared category does not by itself prove register-level or system-level interchangeability.
What is the difference between ADF41513BCPZ and ADF4154BCPZ?
ADF41513BCPZ is documented as an ultralow-noise frequency synthesizer reaching 26.5 GHz with a -235 dBc/Hz normalized phase-noise floor. ADF4154BCPZ belongs to a related Analog Devices PLL family, but its operating range, divider structure, tuning range, and register implementation must be checked in its own datasheet. Use ADF41513BCPZ for a design explicitly specified around the 26.5 GHz maximum and the ADF41513-family phase-noise target.
When should I choose ADF41513BCPZ over another fractional-N PLL?
Choose ADF41513BCPZ when the system needs a programmable local oscillator reaching 26.5 GHz and prioritizes low phase noise, including the -235 dBc/Hz normalized floor. It is also appropriate when the system can use the ADF41513 reference architecture, output-divider range, and programming register set. Select another PLL if it offers a lower cost, wider tuning range, smaller package, integrated VCO, or a register set already supported by the platform.
What is the best drop-in replacement for ADF41513BCPZ?
No fully documented drop-in replacement is established for ADF41513BCPZ because the exact BCPZ package, exposed-pad thermal path, RF range, divider configuration, reference inputs, and register map must all match. ADF4159CCPZ and ADF4154BCPZ are useful same-manufacturer comparison points, but compatibility requires a pin-by-pin and register-by-register review rather than an MPN-only assumption. Treat either candidate as a redesign candidate until the Analog Devices datasheets and your board constraints confirm compatibility.
Can ADF4159CCPZ replace ADF41513BCPZ?
ADF4159CCPZ cannot be declared a drop-in replacement for ADF41513BCPZ without a detailed compatibility review. The parts are related Analog Devices frequency synthesizers and appear in comparison listings, but the replacement must preserve the 24-lead footprint, exposed-pad behavior, RF frequency range, reference connections, charge-pump requirements, divider settings, and programming interface. Verify every electrical and pin-level requirement before substituting it.
What is the best Analog Devices equivalent for ADF41513BCPZ?
ADF4159CCPZ is the closest comparison candidate identified for ADF41513BCPZ, but it should be treated as a redesign option rather than a guaranteed drop-in equivalent. The Analog Devices ADF41513 datasheet and the ADF4159 datasheet should be compared for RF output range, PFD rates, reference input range, divider structure, loop-filter architecture, pinout, power supplies, and serial-register implementation. Existing firmware may require functional changes even if the board footprint appears similar.

Données de référence d'ingénierie pour ADF41513BCPZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADF41513BCPZ when the design requires a programmable RF local oscillator reaching 26.5 GHz and benefits from the family's -235 dBc/Hz normalized phase-noise floor. It is particularly relevant to wireless receiver and transmitter upconversion or downconversion, microwave test equipment, and instrumentation that can use the ADF41513 reference, divider, and register architecture. Review ADF4159CCPZ when considering an Analog Devices redesign candidate, but check its tuning range, RF limits, reference requirements, divider structure, and programming registers before replacing the device. Consider ADF4154BCPZ when its documented frequency range and register set better match the platform. Both comparison parts are same-manufacturer alternatives, but the present records do not establish complete electrical or software equivalence. For any substitution, preserve the 24-WFQFN exposed-pad footprint, verify every pin, reproduce the loop-filter and reference architecture, and confirm compliance, lifecycle, and thermal requirements before production release.

Comparaison avec les alternatives

Paramètre Ce produit ADF4159CCPZ ADF4154BCPZ
Brand Analog Devices Analog Devices Analog Devices
Package 24-WFQFN with exposed pad 24-WFQFN with exposed pad 24-WFQFN with exposed pad
Synthesizer Architecture Integer-N/Fractional-N Integer-N/Fractional-N Integer-N/Fractional-N

Principaux différenciateurs

  • High maximum RF synthesis frequency (vs ADF4154BCPZ)
  • Documented normalized phase-noise floor (vs ADF4159CCPZ)
  • Mode-specific PFD-rate capability (vs ADF4159CCPZ)

Notes de conception

The Analog Devices ADF41513 datasheet identifies reference-switching feedthrough as a significant spur risk. Keep RFINA and RFINB routing away from VCO traces, maintain a continuous ground reference, and avoid creating a parallel coupling path between the reference and oscillator sections. Use controlled-impedance routing for RF nets and place loop-filter components close to the charge-pump and feedback-divider connections to reduce parasitic feedback.

The 24-lead WFQFN package has an exposed pad that must be connected according to the datasheet land pattern and thermal guidance. Use the manufacturer-recommended footprint dimensions rather than adapting a generic QFN land pattern. Provide local supply decoupling at each appropriate supply pin and connect the exposed pad to the designated ground plane with adequate thermal-via density to limit junction-temperature rise during continuous RF operation.

Do not assume that integer-N and fractional-N modes have the same maximum PFD rate. The ADF41513 supports up to 250 MHz in integer-N mode and 125 MHz in fractional-N mode. Confirm the selected mode, PFD rate, reference frequency, feedback divider, output divider, and sigma-delta configuration against the operating limits before programming the device; otherwise phase lock, spur performance, or output-frequency accuracy may fall outside the intended operating envelope.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance attributes require confirmation from the current Analog Devices product documentation or the relevant declaration files.

Recherches associées

adf41513bcpz datasheet ADF41513BCPZ pinout ADF41513BCPZ datasheet pdf ADF41513BCPZ equivalent ADF41513BCPZ replacement ADF41513BCPZ cross reference ADF41513BCPZ footprint ADF41513BCPZ application circuit ADF41513BCPZ vs ADF4159CCPZ ADF41513BCPZ price ADF41513BCPZ stock Analog Devices ADF41513BCPZ ADF41513 26.5 GHz PLL ADF41513 fractional-N synthesizer

Composants & termes associés

Analog Devices ADF41513 ADF41513BCPZ ADF4159CCPZ ADF4154BCPZ PLL frequency synthesizer integer-N PLL fractional-N PLL phase-locked loop phase-frequency detector PFD voltage-controlled oscillator VCO sigma-delta modulator normalized phase noise -235 dBc/Hz 26.5 GHz SiGe BiCMOS 24-WFQFN surface-mount package wireless receiver wireless transmitter local oscillator
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ