ADF41513BCPZ - 26.5 GHz Fractional-N PLL Synthesizer | Analog Devices
MPN: ADF41513BCPZ ✓ 啟用中ADF41513BCPZ 概覽
A PLL frequency synthesizer belongs to the clock-and-timing IC hierarchy, where it combines a phase-locked loop, programmable frequency dividers, a phase-frequency detector, and a voltage-controlled oscillator with an integrated or external resonator. In a wireless transmitter or receiver, the ADF41513 can synthesize coherent local-oscillator signals needed by upconversion and downconversion stages. Its fractional-N operation supports fine frequency resolution while retaining high reference-channel rates for improved phase-noise and spur performance.
The device supports both integer-N and fractional-N synthesis, giving designers flexibility between exact integer multiplication and fine fractional frequency control. The maximum PFD rate is 250 MHz in integer-N mode and 125 MHz in fractional-N mode. Its -235 dBc/Hz normalized phase-noise floor is particularly useful in receiver and transmitter signal chains where close-in phase noise can affect modulation fidelity, receiver selectivity, and transmitter signal quality.
ADF41513BCPZ is used for wireless receiver and transmitter local oscillators, microwave downconversion, microwave upconversion, test and measurement equipment, and instrumentation requiring programmable RF output. The manufacturer describes the family as an ultralow-noise frequency synthesizer capable of operating as high as 26.5 GHz.
The principal PCB concern is high-frequency isolation. The manufacturer datasheet notes that reference-switching noise can feed through the RFINA or RFINB pins and return to the VCO, potentially producing reference spurs as high as -90 dBc. Keep reference and VCO routing separated, use controlled impedance, and preserve a continuous ground return beneath RF traces.
This product page combines the verified manufacturer specifications with sourcing guidance, replacement analysis, and practical RF layout considerations. The ADF41513BCPZ is appropriate when an adjustable fractional-N synthesizer is required, but the complete pin description, programming interface, and detailed electrical limits must be taken from the Analog Devices ADF41513 datasheet before schematic capture and PCB release.
直接替換替代品,適用於 ADF41513BCPZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADF41513BCPZ (相同外形與佔位) — 差異在於 Package, Device Type, Maximum RF Output Frequency.
ADF4159CCPZ
✅ 直接替換聯絡詢價
查看資料表 →ADF4154BCPZ
✅ 直接替換聯絡詢價
查看資料表 →ADF41513BCPZ 規格
| Device Type | Integer-N/Fractional-N PLL frequency synthesizer |
| Maximum RF Output Frequency | 26.5 GHz |
| Normalized Phase Noise Floor | -235 dBc/Hz |
| PFD Maximum Frequency, Integer-N Mode | 250 MHz |
| PFD Maximum Frequency, Fractional-N Mode | 125 MHz |
| Process Technology | SiGe BiCMOS |
| Synthesizer Mode | Integer-N and fractional-N |
| 封裝 | 24-lead WFQFN with exposed pad |
| 安裝類型 | Surface mount |
ADF41513BCPZ 24-lead wfqfn with exposed pad 腳位配置指南
ADF41513BCPZ(24-lead wfqfn with exposed pad 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADF41513BCPZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADF41513BCPZ 適用於 6 應用s: Wireless Receiver Local Oscillator, Microwave Transmitter Upconversion, Microwave Receiver Downconversion, RF Test and Measurement Equipment, Instrumentation and Signal Analysis, Clock Generation and Jitter Management.
Wireless Receiver Local Oscillator
The ADF41513BCPZ fits a programmable wireless receiver local oscillator because it supports RF synthesis up to 26.5 GHz and integer-N and fractional-N operating modes. The -235 dBc/Hz normalized phase-noise floor provides a strong starting point for close-in phase-noise-sensitive receiver architectures. Place the synthesizer reference, VCO, charge pump, and loop-filter networks according to the manufacturer layout guidance, while isolating reference switching paths from sensitive RF routes. Final phase-noise and spur performance still depend on the external VCO, reference oscillator, loop bandwidth, output frequency, and PCB implementation.
推薦
Microwave Transmitter Upconversion
The ADF41513BCPZ can generate a programmable local-oscillator signal for microwave transmitter upconversion up to the 26.5 GHz maximum supported frequency. Fractional-N operation is useful when the target frequency requires finer synthesis granularity, while the high PFD-rate capability can support low-noise loop designs in appropriate operating modes. The designer must account for output-divider limits, VCO tuning range, reference harmonics, and unwanted coupling into the RF output path. PCB isolation and controlled impedance are particularly important when the synthesizer shares space with a high-power transmit chain.
推薦
Microwave Receiver Downconversion
For microwave downconversion, the ADF41513BCPZ provides a programmable low-noise local-oscillator source covering frequencies as high as 26.5 GHz. The -235 dBc/Hz normalized phase-noise floor helps characterize designs where close-in oscillator noise could degrade receiver sensitivity or adjacent-channel performance. Use integer-N mode when an exact integer multiplication ratio is sufficient, or fractional-N mode when finer frequency resolution is required. The loop filter, external VCO, crystal or reference source, and RF routing determine the final phase-noise and spur performance.
推薦
RF Test and Measurement Equipment
The ADF41513BCPZ is suitable for programmable RF test equipment that needs a synthesized local-oscillator signal across the microwave range. Its output can reach 26.5 GHz, and integer-N and fractional-N modes support different resolution and spur-management strategies. A laboratory source still requires accurate calibration, low-noise references, stable output-divider settings, and careful grounding to achieve repeatable phase-noise measurements. The exposed pad must be tied to the appropriate thermal and electrical ground plane according to the package guidance.
推薦
Instrumentation and Signal Analysis
The ADF41513BCPZ can supply a coherent, programmable RF source for instrumentation and signal-analysis systems where a fixed oscillator is insufficient. The integer-N and fractional-N architecture allows the instrument firmware to select an appropriate output-divider and feedback configuration for each test frequency. The -235 dBc/Hz normalized phase-noise figure gives designers a common benchmark for comparison with other synthesizers. In practice, reference phase noise, loop-filter component tolerances, VCO tuning sensitivity, and PCB isolation determine whether the instrument meets its measurement floor.
推薦
Clock Generation and Jitter Management
ADF41513BCPZ can be used as a programmable high-frequency clock source when the system requires frequency agility and fractional resolution beyond a fixed oscillator. The device supports RF output frequencies as high as 26.5 GHz and PFD rates up to 250 MHz in integer-N mode, subject to the complete operating conditions in the datasheet. Designers should preserve the recommended power and ground connections, decouple supply pins locally, and keep noisy digital programming activity away from sensitive reference and VCO nodes. Firmware must configure the divider and sigma-delta parameters correctly for stable phase-noise and spur performance.
推薦
推薦產品摘要
工程參考資料,適用於 ADF41513BCPZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADF4159CCPZ | ADF4154BCPZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-WFQFN with exposed pad | 24-WFQFN with exposed pad | 24-WFQFN with exposed pad |
| Synthesizer Architecture | Integer-N/Fractional-N | Integer-N/Fractional-N | Integer-N/Fractional-N |
主要差異化特點
- High maximum RF synthesis frequency (對比ADF4154BCPZ)
- Documented normalized phase-noise floor (對比ADF4159CCPZ)
- Mode-specific PFD-rate capability (對比ADF4159CCPZ)
設計說明
The Analog Devices ADF41513 datasheet identifies reference-switching feedthrough as a significant spur risk. Keep RFINA and RFINB routing away from VCO traces, maintain a continuous ground reference, and avoid creating a parallel coupling path between the reference and oscillator sections. Use controlled-impedance routing for RF nets and place loop-filter components close to the charge-pump and feedback-divider connections to reduce parasitic feedback.
The 24-lead WFQFN package has an exposed pad that must be connected according to the datasheet land pattern and thermal guidance. Use the manufacturer-recommended footprint dimensions rather than adapting a generic QFN land pattern. Provide local supply decoupling at each appropriate supply pin and connect the exposed pad to the designated ground plane with adequate thermal-via density to limit junction-temperature rise during continuous RF operation.
Do not assume that integer-N and fractional-N modes have the same maximum PFD rate. The ADF41513 supports up to 250 MHz in integer-N mode and 125 MHz in fractional-N mode. Confirm the selected mode, PFD rate, reference frequency, feedback divider, output divider, and sigma-delta configuration against the operating limits before programming the device; otherwise phase lock, spur performance, or output-frequency accuracy may fall outside the intended operating envelope.
合規資訊
Compliance attributes require confirmation from the current Analog Devices product documentation or the relevant declaration files.