Analog Devices

ADF4360-1BCPZ - 2.45 GHz Integer-N PLL VCO | Analog Devices

Référence : ADF4360-1BCPZ ✓ Actif
3.0 V to 3.6 V Vdss 24-WFQFN exposed-pad CSP Package 2050 MHz to 2450 MHz Speed
MOQ : 1 |

ADF4360-1BCPZ Présentation

The Analog Devices ADF4360-1BCPZ is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator for RF applications, with a 2050 MHz to 2450 MHz output-frequency range and a divide-by-2 output option covering 1025 MHz to 1225 MHz. The device operates from a 3.0 V to 3.6 V power supply, supports 1.8 V logic compatibility, and is packaged in a 24-WFQFN exposed-pad CSP.

An integer-N PLL frequency synthesizer generates a stable, programmable RF output by comparing a divided feedback signal with a reference and driving an internal voltage-controlled oscillator. The ADF4360-1 integrates the PLL, VCO, reference divider, feedback divider, and associated control functions, reducing board space and implementation effort compared with a discrete synthesizer implementation.

The principal operating characteristics are a 2050 MHz to 2450 MHz synthesis range, divide-by-2 operation from 1025 MHz to 1225 MHz, and a 3.0 V to 3.6 V supply range. The package includes an exposed pad for improved thermal performance, while the 1.8 V-compatible digital interface helps simplify control from low-voltage system logic.

The ADF4360-1 is intended for RF signal generation where a programmable local oscillator is required. Its integrated PLL and VCO allow frequency selection through the device control interface, and the divide-by-2 output can provide a lower-frequency signal from the same synthesizer when the system does not require the full upper tuning range.

Typical uses include wireless communication equipment, test and measurement instruments, RF signal chains, frequency conversion systems, and industrial RF equipment. The integrated architecture is particularly useful when the design needs a compact programmable RF source without implementing discrete VCO, divider, and feedback-loop components.

When laying out the PCB, place the device power and ground connections according to the manufacturer datasheet, connect the exposed pad to the appropriate ground-plane area, and route the reference, RF, and control signals with short, controlled-impedance traces. Confirm the final frequency plan, loop-filter component values, output matching network, and supply decoupling against the datasheet and evaluation-board design.

This page combines the ADF4360-1BCPZ device identity, verified manufacturer and distributor references, practical RF design guidance, and a structured comparison framework. The evaluation board ADF4360-1EBZ1 is identified by Analog Devices as containing an ADF4360-1BCPZ and provides a useful reference for bench-level integration of the integrated synthesizer and VCO.

Alternatives de remplacement direct pour ADF4360-1BCPZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADF4360-1BCPZ (même facteur de forme et même empreinte) — différant par Package, Supply Voltage Range, Device Type, Divide-by-2 Output Range, Product Type.

Analog Devices
Package: 24-lead WFQFN with exposed pad
Divide-by-2 Output Range: 1200 MHz to 1360 MHz
Product Type: Fully integrated integer-N frequency synthesizer and VCO
Comparer avec ADF4360-1BCPZ →
Analog Devices
Package: 24-lead WFQFN with exposed pad
Supply Voltage Range: 3 V to 3.6 V
Device Type: Integer-N frequency synthesizer with integrated voltage controlled oscillator
Comparer avec ADF4360-1BCPZ →
Analog Devices
Package: 24-lead LFCSP with exposed pad
Product Type: Integer-N frequency synthesizer with integrated VCO
Comparer avec ADF4360-1BCPZ →

ADF4360-0BCP

✅ Remplacement direct
Analog Devices
📦 24-WFQFN exposed-pad CSP
Fully integrated integer-N frequency synthesizer and VCO · 2600 MHz · 1200 MHz to 1360 MHz · Integer-N phase-locked-loop synthesizer · Integrated voltage-controlled oscillator · 2600 MHz center frequency · 2.725 GHz · 24-lead WFQFN with exposed pad

Contactez-nous pour le prix

Voir la fiche technique →

ADF4360-2BCP

✅ Remplacement direct
Analog Devices
📦 24-WFQFN exposed-pad CSP
Fully integrated integer-N synthesizer and voltage-controlled oscillator · 2000 MHz · 925 MHz to 1085 MHz · 3.6 V · 1.8 V · Integer-N · 3-wire serial interface · Programmable

Contactez-nous pour le prix

Voir la fiche technique →

ADF4360-3BCPRL

✅ Remplacement direct
Analog Devices
📦 24-WFQFN exposed-pad CSP
Integer-N frequency synthesizer with integrated voltage controlled oscillator · 1750 MHz · 800 MHz to 975 MHz · 3 V to 3.6 V · 24 terminals · 24-lead WFQFN with exposed pad · Surface mount · No lead

Contactez-nous pour le prix

Voir la fiche technique →

ADF4360-1BCP

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 24-WFQFN exposed-pad CSP
2250 MHz · 1025 MHz to 1225 MHz · 2450 MHz · 10 MHz to 250 MHz · 3.6 V · 1.8 V · Integer-N · Divide-by-2

Contactez-nous pour le prix

Voir la fiche technique →

ADF4360-7BCPZ

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Analog Devices
📦 24-WFQFN exposed-pad CSP
Integer-N frequency synthesizer with integrated VCO · Analog Devices · 350 MHz to 1800 MHz · 175 MHz to 900 MHz · 1800 MHz · 3.0 V to 3.6 V · 3.6 V · 1.8 V

Contactez-nous pour le prix

Voir la fiche technique →

ADF4360-1BCPZ Spécifications

Device Type Integrated integer-N frequency synthesizer and VCO
Output Frequency Range 2050 MHz to 2450 MHz
Maximum Listed Output Frequency 2450 MHz
Divide-by-2 Output Range 1025 MHz to 1225 MHz
Supply Voltage Range 3.0 V to 3.6 V
Logic Compatibility 1.8 V
Input Frequency Range 10 MHz to 250 MHz
Synthesizer Architecture Integer-N PLL
VCO Integrated voltage-controlled oscillator
Output Divide Option Divide-by-2
Boîtier 24-WFQFN exposed-pad CSP
Nombre de broches 24 pins
Type de montage Surface mount
Statut RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Guide de configuration des broches du ADF4360-1BCPZ 24-wfqfn exposed-pad csp

Configuration des broches du ADF4360-1BCPZ (boîtier 24-wfqfn exposed-pad csp). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 24-wfqfn exposed-pad csp pour le ADF4360-1BCPZ

Aucune donnée de brochage détaillée disponible pour ADF4360-1BCPZ.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADF4360-1BCPZ convient pour 6 applications: RF Communication Signal Generation, RF Test and Measurement, Industrial RF Control, Frequency Conversion Subsystems, Wireless Infrastructure Equipment, RF Communication Test Loops.

🌐

RF Communication Signal Generation

The ADF4360-1BCPZ is suitable for programmable RF signal generation in wireless communication equipment because it integrates an integer-N PLL and VCO into one device. Its 2050 MHz to 2450 MHz output range can support RF front-end testing, local-oscillator generation, and frequency-conversion subsystems. The 3.0 V to 3.6 V supply and 1.8 V logic compatibility simplify integration with compact radio platforms. Designers should select the loop-filter bandwidth and reference configuration for the required channel spacing and phase noise, then validate the complete RF output through the ADF4360-1EBZ1 evaluation platform.

📡

RF Test and Measurement

The ADF4360-1BCPZ can provide a compact programmable source for RF test equipment operating in the 2050 MHz to 2450 MHz band. Integrating the PLL and VCO reduces the number of separate frequency-generation components that must be assembled and calibrated. The divide-by-2 output provides an additional 1025 MHz to 1225 MHz range for measurement blocks requiring a lower-frequency source. For laboratory-grade results, evaluate reference phase noise, spur performance, output power, and loop bandwidth against the instrument’s measurement specification.

🏭

Industrial RF Control

The ADF4360-1BCPZ can serve as the RF signal source in industrial RF systems that require programmable frequency selection. The integrated integer-N architecture supports compact control boards, while the 24-WFQFN exposed-pad package provides a defined thermal and grounding path. The 3.0 V to 3.6 V operating supply is compatible with common RF front-end power partitioning. Engineers should verify the required output range, reference frequency, loop dynamics, and output matching before releasing a production design.

🔧

Frequency Conversion Subsystems

The ADF4360-1BCPZ is appropriate for local-oscillator generation in RF up-converter and down-converter subsystems. A programmable synthesizer allows the receiver or transmitter to select different operating bands without changing the RF front-end layout. The main output covers 2050 MHz to 2450 MHz, and the divide-by-2 path covers 1025 MHz to 1225 MHz, enabling design reuse across two related frequency bands. The final RF board should validate impedance-controlled routing, output matching, isolation, and unwanted sideband performance.

🖥️

Wireless Infrastructure Equipment

The ADF4360-1BCPZ can support programmable RF functions within wireless infrastructure equipment when the operating band falls within the 2050 MHz to 2450 MHz range. Its integrated PLL and VCO allow a smaller RF generation section than a discrete implementation, while the 1.8 V-compatible interface supports integration with low-voltage control logic. Designers should confirm reference purity, channel-plan requirements, phase-noise limits, and supply sequencing. The exposed-pad footprint requires careful thermal design and adequate ground-plane connection.

📡

RF Communication Test Loops

The ADF4360-1BCPZ is useful in RF communication test loops where a repeatable, programmable oscillator is needed to emulate different operating conditions. The integrated frequency synthesizer supports software-controlled frequency selection, and the 24-WFQFN package supports compact instrument electronics. The divide-by-2 output adds flexibility when the test architecture requires a lower-frequency source. For production test systems, characterize output power, tuning accuracy, settling behavior, and reference locking across the complete temperature range before adopting the device.

Récapitulatif des produits recommandés

ADF4360-1EBZ1 Manufacturer evaluation board containing ADF4360-1BCPZ Utilisé dans : RF Communication Signal Generation, RF Test and Measurement, Industrial RF Control, Frequency Conversion Subsystems, Wireless Infrastructure Equipment, RF Communication Test Loops
What is the operating frequency range of ADF4360-1BCPZ?
The ADF4360-1BCPZ provides a synthesis output range from 2050 MHz to 1225 MHz, expressed in the datasheet family notation as 2050 MHz to 2450 MHz for the main output and 1025 MHz to 1225 MHz with the divide-by-2 option. According to the ADF4360-1 manufacturer datasheet, the device is an integrated integer-N synthesizer and VCO. It uses a 3.0 V to 3.6 V supply and supports 1.8 V logic compatibility.
Is the ADF4360-1BCPZ a PLL and VCO in one package?
Yes. The ADF4360-1BCPZ combines an integer-N phase-locked loop with an integrated voltage-controlled oscillator in a 24-WFQFN exposed-pad package. Analog Devices describes the ADF4360-1 as an integrated synthesizer and VCO, allowing the device to provide programmable RF output generation while reducing the number of separate RF and feedback components required on the PCB.
What supply voltage does ADF4360-1BCPZ require?
The ADF4360-1BCPZ requires a 3.0 V to 3.6 V power supply for its analog and synthesizer sections. The manufacturer datasheet also identifies 1.8 V logic compatibility for the digital control interface. The exposed pad should be connected according to the datasheet land-pattern and thermal recommendations rather than treated as an unused package terminal.
What is the divide-by-2 output range of ADF4360-1BCPZ?
The divide-by-2 output covers 1025 MHz to 1225 MHz. The main RF synthesis range is 2050 MHz to 2450 MHz, so the divide-by-2 path provides a lower-frequency output for designs that do not require the upper tuning range. This feature is described in the Analog Devices ADF4360-1 product and datasheet material.
What can replace the ADF4360-1BCPZ?
The closest same-brand replacement candidates are the ADF4360 family variants listed in the comparison data, provided the required output range and control behavior match. The ADF4360-0BCP and ADF4360-2BCP are explicitly identified in comparison references, while ADF4360-3BCPRL is another family comparison candidate. Confirm the exact frequency range, package, pin function, reference requirements, and electrical limits before replacing the part.
Is ADF4360-1BCPZ the same as ADF4360-0BCP?
No. ADF4360-1BCPZ and ADF4360-0BCP are members of the same ADF4360 family but are not necessarily interchangeable for every design. The comparison data identifies differences in specifications and package-related characteristics. Select the variant whose output-frequency range, divide options, reference configuration, and control requirements satisfy the target RF design; do not assume that family membership alone guarantees drop-in compatibility.
When should I choose ADF4360-1BCPZ over ADF4360-2BCP?
Choose ADF4360-1BCPZ when the RF plan requires the 2050 MHz to 2450 MHz main output range or the 1025 MHz to 1225 MHz divide-by-2 range. Choose ADF4360-2BCP only after confirming that its frequency range and other electrical requirements are appropriate for the target system. The two parts are identified in comparison references, but the specific output band must drive the final selection.
Is ADF4360-1BCPZ suitable for RF test equipment?
Yes, ADF4360-1BCPZ is suitable for programmable RF signal-generation applications where a compact integrated PLL and VCO is valuable. The 2050 MHz to 2450 MHz range, divide-by-2 option, and 3.0 V to 3.6 V supply fit RF test and measurement signal chains. The reference frequency, loop bandwidth, output matching, phase-noise requirements, and allowable spurs must be evaluated for the specific instrument.
Where can I find the ADF4360-1BCPZ datasheet?
The official ADF4360-1 product page provides the manufacturer’s datasheet and product information for the ADF4360-1 family. The target ordering code is ADF4360-1BCPZ, and the listed package is a 24-WFQFN exposed-pad CSP. Use the Analog Devices product page as the primary document source and the evaluation-board page to study the reference implementation.
Where can I find the ADF4360-1BCPZ pinout?
The ADF4360-1BCPZ pin assignment and land pattern are defined in the Analog Devices ADF4360-1 datasheet. The device uses a 24-WFQFN exposed-pad package, so the exposed pad and its ground connection must be included in the PCB footprint. Use the pin-description table and package drawing in the manufacturer datasheet when assigning tracks and vias.
What are the key specifications of ADF4360-1BCPZ?
The key specifications are a 2050 MHz to 2450 MHz main output range, a 1025 MHz to 1225 MHz divide-by-2 range, a 3.0 V to 3.6 V supply, 1.8 V logic compatibility, and a 24-WFQFN exposed-pad package. The Analog Devices product page and datasheet identify the ADF4360-1BCPZ as an integrated integer-N synthesizer and VCO. The input reference range shown in distributor listings is 10 MHz to 250 MHz.
How do I design the PCB around ADF4360-1BCPZ?
Follow the ADF4360-1 manufacturer layout guidance: place power bypass capacitors close to the supply pins, connect the exposed pad to the prescribed ground area, and keep RF, reference, and digital-control routing short. The ADF4360-1EBZ1 evaluation board contains the ADF4360-1BCPZ and can serve as a reference for connector placement, output routing, and power implementation.
What is the lead time for ADF4360-1BCPZ?
Request the current lead time through the Request a Quote form on this page. The manufacturer product page and distributor listings identify the part, but the current production lead time and allocation should be confirmed directly for the exact ADF4360-1BCPZ ordering code. The same form can also confirm package availability and current sourcing status.
Is ADF4360-1BCPZ in stock?
Current stock status should be checked through the Request a Quote form on this page. The verified listings identify the ADF4360-1BCPZ and describe purchase availability, but inventory changes by region, date, and quantity. Provide the required quantity and target package configuration when requesting a quotation.
Where can I buy ADF4360-1BCPZ online?
Use the Request a Quote form on this page to request ADF4360-1BCPZ sourcing, current availability, and delivery information for the exact 24-WFQFN exposed-pad ordering code. The part is an Analog Devices frequency synthesizer and VCO, and its lifecycle status should be confirmed with the manufacturer during production planning.
What is the best drop-in replacement for ADF4360-1BCPZ?
There is no universally verified drop-in replacement from the supplied cross-reference material. The closest same-brand candidates are ADF4360-0BCP, ADF4360-2BCP, and ADF4360-3BCPRL, but each must be checked against the target frequency band, package, pin functions, reference configuration, and control requirements. A family comparison is a starting point, not a substitute for schematic and datasheet validation.
Does ADF4360-1BCPZ meet automotive AEC-Q100 requirements?
The automotive qualification status is not established by the supplied product references. Treat AEC-Q100 qualification as unknown until the manufacturer product page, ordering information, or quality documentation confirms an automotive-grade variant. The ADF4360-1BCPZ is primarily described as a standard integrated synthesizer and VCO for RF applications.

Données de référence d'ingénierie pour ADF4360-1BCPZ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADF4360-1BCPZ when the design requires an integrated integer-N PLL and VCO with a 2050 MHz to 2450 MHz main output range, an optional 1025 MHz to 1225 MHz divide-by-2 output, and a 24-WFQFN exposed-pad implementation. Use ADF4360-0BCP when its frequency band is suitable but the target band is not required, and consider ADF4360-2BCP or ADF4360-3BCPRL only after checking their exact output ranges and divider behavior. ADF4360-1BCP is the closest same-family ordering candidate for a footprint-based design review. No cross-brand drop-in replacement is established by the available material. The decisive checks are the frequency plan, reference input, control interface, package pinout, loop-filter requirements, and RF performance. Use the ADF4360-1EBZ1 evaluation board as the primary reference for power, control, and RF layout.

Comparaison avec les alternatives

Paramètre Ce produit ADF4360-0BCP ADF4360-2BCP ADF4360-3BCPRL ADF4360-1BCP ADF4360-7BCPZ
Package 24-WFQFN exposed-pad CSP 24-WFQFN exposed-pad CSP 24-WFQFN exposed-pad CSP 24-WFQFN exposed-pad CSP 24-WFQFN exposed-pad CSP 24-WFQFN exposed-pad CSP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices

Principaux différenciateurs

  • Integrated PLL and VCO in one RF device (vs ADF4360-0BCP)
  • Main and divide-by-2 operating ranges are explicitly identified (vs ADF4360-2BCP)
  • 1.8 V logic compatibility with 3.0 V to 3.6 V operation (vs ADF4360-3BCPRL)

Notes de conception

Use the manufacturer’s 24-WFQFN land pattern and route the exposed pad to the specified ground-plane region. Place the supply bypass capacitors immediately adjacent to the relevant power pins, and keep the reference and RF connections short. The exposed pad is part of the thermal path, so a thermal-via arrangement consistent with the datasheet and board stack-up should be evaluated.

Treat the reference input, RF outputs, and feedback-related connections as controlled-impedance paths. Keep the reference routing away from the VCO and high-current supply paths, and use the evaluation-board layout as a starting point for RF output matching and connector placement. Confirm the final divider settings, loop-filter values, and output network in simulation before fabrication.

Do not select an ADF4360 family alternative from the family name alone. The main output range, divide-by-2 range, reference input requirements, divider configuration, control interface, and package-specific pin functions must all match the intended PCB and frequency plan. The ADF4360-1EBZ1 board contains an ADF4360-1BCPZ and is a useful implementation reference.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available product and distributor references do not provide explicit compliance declarations for the ADF4360-1BCPZ. Confirm RoHS, REACH, lead-free, halogen-free, conflict-mineral, and automotive qualification status with Analog Devices before production release.

Données vérifiées le : 2026-11-10 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-1BCPZ datasheet ADF4360-1BCPZ pinout ADF4360-1BCPZ datasheet pdf ADF4360-1BCPZ equivalent ADF4360-1BCPZ replacement ADF4360-1BCPZ cross reference ADF4360-1BCPZ footprint ADF4360-1BCPZ application circuit Analog Devices ADF4360-1BCPZ ADF4360-1BCPZ price ADF4360-1BCPZ stock ADF4360-1BCPZ evaluation board

Composants & termes associés

Analog Devices ADF4360-1BCPZ ADF4360-0BCP ADF4360-2BCP ADF4360-3BCPRL ADF4360-7BCPZ ADF4360-1EBZ1 integer-N synthesizer phase-locked loop PLL voltage-controlled oscillator VCO frequency synthesizer RF integrated circuit clock and timing IC 24-WFQFN QFN family surface mount SMD divide-by-2 output 2050 MHz 2450 MHz 3.0 V to 3.6 V supply 1.8 V logic compatibility RoHS REACH AEC-Q100 ADF4360 family
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ