ADF4360-1BCPZ - 2.45 GHz Integer-N PLL VCO | Analog Devices
Артикул: ADF4360-1BCPZ ✓ АктивенADF4360-1BCPZ Обзор
An integer-N PLL frequency synthesizer generates a stable, programmable RF output by comparing a divided feedback signal with a reference and driving an internal voltage-controlled oscillator. The ADF4360-1 integrates the PLL, VCO, reference divider, feedback divider, and associated control functions, reducing board space and implementation effort compared with a discrete synthesizer implementation.
The principal operating characteristics are a 2050 MHz to 2450 MHz synthesis range, divide-by-2 operation from 1025 MHz to 1225 MHz, and a 3.0 V to 3.6 V supply range. The package includes an exposed pad for improved thermal performance, while the 1.8 V-compatible digital interface helps simplify control from low-voltage system logic.
The ADF4360-1 is intended for RF signal generation where a programmable local oscillator is required. Its integrated PLL and VCO allow frequency selection through the device control interface, and the divide-by-2 output can provide a lower-frequency signal from the same synthesizer when the system does not require the full upper tuning range.
Typical uses include wireless communication equipment, test and measurement instruments, RF signal chains, frequency conversion systems, and industrial RF equipment. The integrated architecture is particularly useful when the design needs a compact programmable RF source without implementing discrete VCO, divider, and feedback-loop components.
When laying out the PCB, place the device power and ground connections according to the manufacturer datasheet, connect the exposed pad to the appropriate ground-plane area, and route the reference, RF, and control signals with short, controlled-impedance traces. Confirm the final frequency plan, loop-filter component values, output matching network, and supply decoupling against the datasheet and evaluation-board design.
This page combines the ADF4360-1BCPZ device identity, verified manufacturer and distributor references, practical RF design guidance, and a structured comparison framework. The evaluation board ADF4360-1EBZ1 is identified by Analog Devices as containing an ADF4360-1BCPZ and provides a useful reference for bench-level integration of the integrated synthesizer and VCO.
Аналоги без доработки для ADF4360-1BCPZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADF4360-1BCPZ (тот же форм-фактор и посадочное место) — отличается по Package, Supply Voltage Range, Device Type, Divide-by-2 Output Range, Product Type.
ADF4360-0BCP
✅ Прямая заменаУточнить цену
Открыть даташит →ADF4360-2BCP
✅ Прямая заменаУточнить цену
Открыть даташит →ADF4360-3BCPRL
✅ Прямая заменаУточнить цену
Открыть даташит →ADF4360-1BCP
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ADF4360-7BCPZ
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ADF4360-1BCPZ Характеристики
| Device Type | Integrated integer-N frequency synthesizer and VCO |
| Output Frequency Range | 2050 MHz to 2450 MHz |
| Maximum Listed Output Frequency | 2450 MHz |
| Divide-by-2 Output Range | 1025 MHz to 1225 MHz |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Logic Compatibility | 1.8 V |
| Input Frequency Range | 10 MHz to 250 MHz |
| Synthesizer Architecture | Integer-N PLL |
| VCO | Integrated voltage-controlled oscillator |
| Output Divide Option | Divide-by-2 |
| Корпус | 24-WFQFN exposed-pad CSP |
| Число выводов | 24 pins |
| Тип монтажа | Surface mount |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Руководство по цоколевке ADF4360-1BCPZ в корпусе 24-wfqfn exposed-pad csp
Цоколевка для ADF4360-1BCPZ (корпус 24-wfqfn exposed-pad csp). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ADF4360-1BCPZ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ADF4360-1BCPZ подходит для 6 применениеs: RF Communication Signal Generation, RF Test and Measurement, Industrial RF Control, Frequency Conversion Subsystems, Wireless Infrastructure Equipment, RF Communication Test Loops.
RF Communication Signal Generation
The ADF4360-1BCPZ is suitable for programmable RF signal generation in wireless communication equipment because it integrates an integer-N PLL and VCO into one device. Its 2050 MHz to 2450 MHz output range can support RF front-end testing, local-oscillator generation, and frequency-conversion subsystems. The 3.0 V to 3.6 V supply and 1.8 V logic compatibility simplify integration with compact radio platforms. Designers should select the loop-filter bandwidth and reference configuration for the required channel spacing and phase noise, then validate the complete RF output through the ADF4360-1EBZ1 evaluation platform.
Рекомендуется
RF Test and Measurement
The ADF4360-1BCPZ can provide a compact programmable source for RF test equipment operating in the 2050 MHz to 2450 MHz band. Integrating the PLL and VCO reduces the number of separate frequency-generation components that must be assembled and calibrated. The divide-by-2 output provides an additional 1025 MHz to 1225 MHz range for measurement blocks requiring a lower-frequency source. For laboratory-grade results, evaluate reference phase noise, spur performance, output power, and loop bandwidth against the instrument’s measurement specification.
Рекомендуется
Industrial RF Control
The ADF4360-1BCPZ can serve as the RF signal source in industrial RF systems that require programmable frequency selection. The integrated integer-N architecture supports compact control boards, while the 24-WFQFN exposed-pad package provides a defined thermal and grounding path. The 3.0 V to 3.6 V operating supply is compatible with common RF front-end power partitioning. Engineers should verify the required output range, reference frequency, loop dynamics, and output matching before releasing a production design.
Рекомендуется
Frequency Conversion Subsystems
The ADF4360-1BCPZ is appropriate for local-oscillator generation in RF up-converter and down-converter subsystems. A programmable synthesizer allows the receiver or transmitter to select different operating bands without changing the RF front-end layout. The main output covers 2050 MHz to 2450 MHz, and the divide-by-2 path covers 1025 MHz to 1225 MHz, enabling design reuse across two related frequency bands. The final RF board should validate impedance-controlled routing, output matching, isolation, and unwanted sideband performance.
Рекомендуется
Wireless Infrastructure Equipment
The ADF4360-1BCPZ can support programmable RF functions within wireless infrastructure equipment when the operating band falls within the 2050 MHz to 2450 MHz range. Its integrated PLL and VCO allow a smaller RF generation section than a discrete implementation, while the 1.8 V-compatible interface supports integration with low-voltage control logic. Designers should confirm reference purity, channel-plan requirements, phase-noise limits, and supply sequencing. The exposed-pad footprint requires careful thermal design and adequate ground-plane connection.
Рекомендуется
RF Communication Test Loops
The ADF4360-1BCPZ is useful in RF communication test loops where a repeatable, programmable oscillator is needed to emulate different operating conditions. The integrated frequency synthesizer supports software-controlled frequency selection, and the 24-WFQFN package supports compact instrument electronics. The divide-by-2 output adds flexibility when the test architecture requires a lower-frequency source. For production test systems, characterize output power, tuning accuracy, settling behavior, and reference locking across the complete temperature range before adopting the device.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADF4360-1BCPZ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADF4360-0BCP | ADF4360-2BCP | ADF4360-3BCPRL | ADF4360-1BCP | ADF4360-7BCPZ |
|---|---|---|---|---|---|---|
| Package | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
Ключевые отличия
- Integrated PLL and VCO in one RF device (против ADF4360-0BCP)
- Main and divide-by-2 operating ranges are explicitly identified (против ADF4360-2BCP)
- 1.8 V logic compatibility with 3.0 V to 3.6 V operation (против ADF4360-3BCPRL)
Заметки по проектированию
Use the manufacturer’s 24-WFQFN land pattern and route the exposed pad to the specified ground-plane region. Place the supply bypass capacitors immediately adjacent to the relevant power pins, and keep the reference and RF connections short. The exposed pad is part of the thermal path, so a thermal-via arrangement consistent with the datasheet and board stack-up should be evaluated.
Treat the reference input, RF outputs, and feedback-related connections as controlled-impedance paths. Keep the reference routing away from the VCO and high-current supply paths, and use the evaluation-board layout as a starting point for RF output matching and connector placement. Confirm the final divider settings, loop-filter values, and output network in simulation before fabrication.
Do not select an ADF4360 family alternative from the family name alone. The main output range, divide-by-2 range, reference input requirements, divider configuration, control interface, and package-specific pin functions must all match the intended PCB and frequency plan. The ADF4360-1EBZ1 board contains an ADF4360-1BCPZ and is a useful implementation reference.
Информация о соответствии
The available product and distributor references do not provide explicit compliance declarations for the ADF4360-1BCPZ. Confirm RoHS, REACH, lead-free, halogen-free, conflict-mineral, and automotive qualification status with Analog Devices before production release.