Analog Devices

ADF5002BCPZ-RL7 - 18 GHz Divide-by-8 RF Prescaler | Analog Devices

Référence : ADF5002BCPZ-RL7 ✓ Actif
3.3 V Vdss 16-lead WFQFN CSP with exposed pad Package 18 GHz Speed
MOQ : 1 |

ADF5002BCPZ-RL7 Présentation

The Analog Devices ADF5002BCPZ-RL7 is a fixed divide-by-8 RF prescaler that can divide input frequencies as high as 18 GHz to a lower frequency suitable for a phase-locked-loop synthesizer. It operates from a 3.3 V supply and provides differential 100 Ω RF outputs for direct connection to compatible PLL inputs. The device is packaged in a 16-lead WFQFN CSP with an exposed pad.

An RF prescaler is a frequency-divider block used at the input of a PLL frequency synthesizer. It reduces a high-frequency reference signal by a fixed ratio so that the synthesizer’s phase detector and feedback divider can operate within a more practical frequency range. In this architecture, the ADF5002BCPZ-RL7 belongs to the clock and timing IC hierarchy and serves as the high-frequency divide-by-8 stage preceding PLL circuits such as the ADF4156 or ADF4106.

The principal functional specifications are an 18 GHz maximum input frequency, fixed divide ratio of 8, and 3.3 V power supply. The Analog Devices ADF5002 datasheet also specifies differential 100 Ω RF outputs and an operating temperature range of −40°C to +105°C. These characteristics make the part suitable for RF test equipment, microwave communication chains, instrumentation, and frequency-generation systems that require division of microwave-frequency signals without adding another adjustable divider function.

Because the ADF5002 is a fixed divider, its output frequency is the input frequency divided by 8. For example, an 8 GHz input produces a 1 GHz divided output. The RF output interface is differential rather than single-ended, which can simplify connection to suitable balanced PLL inputs and help preserve signal integrity when the PCB interconnects are controlled carefully. The device is intended for low-noise, low-power operation, as described in the manufacturer documentation.

Typical applications include microwave PLL reference paths, RF instrument local-oscillator chains, satellite and microwave communication test equipment, and low-noise RF signal conditioning. The manufacturer specifically identifies the ADF4156 and ADF4106 as suitable downstream PLL ICs. Designers should verify the PLL’s prescaler-input range, allowable input power, impedance requirements, and reference-noise contribution before finalizing the interface.

PCB implementation requires close attention to the exposed thermal and electrical pad, supply decoupling, high-speed RF routing, and grounding. The RF input and differential output paths should use controlled-impedance routing and short connections, with via transitions minimized. The 3.3 V supply network should include local decoupling close to the device, and the exposed pad should be connected to the ground plane according to the manufacturer’s land-pattern and assembly guidance.

This page combines the manufacturer’s device description, package and operating information, sourcing data, comparison fields, and application-focused engineering guidance. It is intended to help engineers identify the correct RF divider, validate its PLL interface, and plan layout without treating a functional similarity as proof of pin-to-pin substitutability.

Alternatives de remplacement direct pour ADF5002BCPZ-RL7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADF5002BCPZ-RL7 (même facteur de forme et même empreinte) — différant par Package, Product Type.

Analog Devices
Package: 16-WFQFN with exposed pad
Product Type: Fixed RF divide-by-8 prescaler IC
Comparer avec ADF5002BCPZ-RL7 →

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

ADF5002BCPZ-RL7 Spécifications

Product Type Fixed RF prescaler
Divide Ratio 8:1
Maximum Input Frequency 18 GHz
Tension d'alimentation 3.3 V
Supply Voltage Tolerance ±10%
RF Output Configuration Differential
RF Output Impedance 100 Ω differential
Plage de température de fonctionnement −40°C to +105°C
Boîtier 16-lead WFQFN CSP with exposed pad
Nominal Package Dimensions 3 mm × 3 mm
Type de montage Surface mount
Input Signal Single-ended RF input
Output Signal Differential RF output
Statut RoHS Compliant
AEC-Q100 Qualification Not applicable

Guide de configuration des broches du ADF5002BCPZ-RL7 3 mm × 3 mm

Configuration des broches du ADF5002BCPZ-RL7 (boîtier 3 mm × 3 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 3 mm × 3 mm pour le ADF5002BCPZ-RL7

Aucune donnée de brochage détaillée disponible pour ADF5002BCPZ-RL7.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADF5002BCPZ-RL7 convient pour 6 applications: Microwave PLL Reference Divider, RF Test and Measurement Equipment, Microwave Communication Signal Conditioning, Low-Phase-Noise Frequency Generation, Instrumentation and Calibration Loops, RF Frequency Divider Subsystem.

🌐

Microwave PLL Reference Divider

The ADF5002BCPZ-RL7 fits at the RF input of a PLL synthesizer because it divides signals as high as 18 GHz by a fixed factor of 8 while operating from a 3.3 V supply. For example, an 8 GHz input becomes a 1 GHz signal suitable for a compatible PLL prescaler input. The differential 100 Ω output helps maintain a balanced RF path, but the selected PLL must support the resulting frequency, signal level, impedance, and noise contribution. This use should be validated with the PLL’s input-referred phase-noise requirements rather than frequency compatibility alone.

🔧

RF Test and Measurement Equipment

The ADF5002BCPZ-RL7 is useful in microwave test equipment that needs a clean, fixed division of an RF source before frequency conversion or synthesis. Its 18 GHz maximum input and divide-by-8 ratio allow a high-frequency source to be translated into a lower-frequency signal while retaining a fixed relationship to the original source. Because the device has differential 100 Ω outputs, the instrument’s signal path should use controlled impedance and minimize discontinuities. Validate gain budget, return loss, harmonic content, and phase-noise degradation to ensure the divider does not limit instrument accuracy.

🌐

Microwave Communication Signal Conditioning

The ADF5002BCPZ-RL7 can condition a microwave-frequency signal in communications equipment by reducing it by 8 before further processing. Its maximum input frequency of 18 GHz covers high-band RF test and conversion contexts, while the 3.3 V operation supports integration with compact low-voltage electronics. The differential output must transition into a balanced receiver or PLL input with controlled impedance and adequate isolation. Board-level RF layout, connector launches, grounding, and return paths should be designed so reflections and coupling do not degrade the 100 Ω differential interface.

📡

Low-Phase-Noise Frequency Generation

The ADF5002BCPZ-RL7 is positioned as a low-noise, low-power RF divider for use ahead of PLL synthesis. Dividing a stable reference signal by 8 can reduce the frequency presented to the PLL while preserving a deterministic relationship to the original source. The divider’s contribution to phase noise and spurs is important in this application, so the complete signal chain must be assessed with the downstream loop bandwidth and reference specifications. The 3.3 V supply and differential 100 Ω outputs favor compact, controlled-impedance implementations when the PCB reference plane is kept continuous.

🔧

Instrumentation and Calibration Loops

The ADF5002BCPZ-RL7 can provide fixed division within instrumentation and calibration circuits that need a lower-frequency representation of a microwave source. The divide-by-8 ratio makes output-frequency calculation direct, and the 18 GHz input capability supports RF instrumentation operating near the device’s upper limit. A practical implementation should keep the RF path short, provide a continuous ground reference, and isolate the divider from switching circuitry. The PLL or measurement receiver should also be checked for allowable input power, bandwidth, and input-referred noise so that the divider’s characteristics remain compatible with the calibration uncertainty.

📻

RF Frequency Divider Subsystem

The ADF5002BCPZ-RL7 can serve as the dedicated RF divider stage in a larger synthesizer subsystem that requires division of carrier-frequency signals before low-bandwidth processing. Its fixed divide-by-8 function avoids the control complexity of a programmable divider and supports a straightforward implementation around a 3.3 V rail. The subsystem should include local supply bypassing, a stable reference and ground arrangement, and controlled-impedance RF routing to the receiving PLL. Validate startup, unwanted coupling, output level, return loss, and temperature-dependent behavior across the intended −40°C to +105°C operating range.

What is the ADF5002BCPZ-RL7?
The ADF5002BCPZ-RL7 is a fixed divide-by-8 RF prescaler from Analog Devices for input signals up to 18 GHz. According to the Analog Devices ADF5002 datasheet, it operates from a 3.3 V supply and provides differential 100 Ω RF outputs. It is intended to reduce a microwave-frequency signal to a lower frequency suitable for a PLL IC such as the ADF4156 or ADF4106.
What is the maximum input frequency of the ADF5002BCPZ-RL7?
The ADF5002BCPZ-RL7 accepts RF input frequencies as high as 18 GHz. The manufacturer identifies it as a fixed RF divider block for use before a PLL synthesizer. Because it is a divide-by-8 device, an 8 GHz input corresponds to a 1 GHz divided output. Verify the RF power, noise, and impedance requirements of the connected circuit before applying signals at the upper frequency limit.
Where can I download the ADF5002BCPZ-RL7 datasheet PDF?
The official ADF5002 datasheet PDF is available from Analog Devices at the manufacturer URL listed on this page. It describes the 18 GHz maximum input frequency, fixed divide-by-8 operation, 3.3 V supply, differential 100 Ω outputs, and −40°C to +105°C operating range. Use the manufacturer’s pin-description and land-pattern sections when assigning connections or designing the exposed-pad footprint.
Where can I find the ADF5002BCPZ-RL7 pinout?
The authoritative pinout is the pin-description table in the official Analog Devices ADF5002 datasheet. The device uses a 16-lead WFQFN CSP with an exposed pad, but that package designation does not have a corresponding canonical diagram key in the available package library. Accordingly, use the manufacturer datasheet for exact pin numbers, exposed-pad connections, and land-pattern dimensions before fabrication.
Can the ADF5002BCPZ-RL7 replace the ADF5002BCPZ?
The ADF5002BCPZ-RL7 and ADF5002BCPZ appear to identify the same ADF5002 device with different orderable packaging codes, but the available product records do not establish their complete commercial, tape-and-reel, or packaging details. Treat the suffix as a procurement-specific ordering code rather than an independently verified drop-in alternative. Confirm the mechanical drawing, packing option, termination treatment, and manufacturer ordering information before substitution.
What is the best drop-in replacement for the ADF5002BCPZ-RL7?
No independently verified drop-in replacement is established for the ADF5002BCPZ-RL7 by the available cross-reference results. A valid replacement must retain the 16-lead WFQFN footprint, fixed divide-by-8 function, 18 GHz operating capability, 3.3 V supply, and compatible RF interface. Similar RF dividers are not automatically drop-in replacements, so any candidate should be checked against the manufacturer pinout, electrical limits, exposed pad, and land pattern.
What can replace the ADF5002BCPZ-RL7?
A replacement must be selected by electrical function, package, and pin compatibility rather than by RF frequency alone. The ADF5002BCPZ-RL7 combines an 18 GHz maximum input, fixed divide-by-8 ratio, 3.3 V supply, and differential 100 Ω outputs in a 16-lead WFQFN CSP. No confirmed equivalent with all of those characteristics is identified, so engineers should use the Request a Quote form to discuss approved sourcing options.
Is the ADF5002BCPZ-RL7 suitable for a PLL frequency synthesizer?
Yes, the ADF5002BCPZ-RL7 is specifically suited to the prescaler input of a compatible PLL frequency synthesizer. Analog Devices identifies the ADF4156 and ADF4106 as examples of PLL ICs that can receive the divided output. The interface must still be checked for differential impedance, allowable input power, frequency range, isolation, and noise requirements; a prescaler can divide the signal correctly but still impair phase noise if the interface is poorly matched.
ADF5002BCPZ-RL7 vs ADF4156BCP-REEL — which device belongs at the PLL input?
The ADF5002BCPZ-RL7 is the RF prescaler, while the ADF4154BCP-REEL listed among related site components is a PLL frequency synthesizer; these are complementary blocks rather than equivalent replacements. The ADF5002 divides an RF signal by 8, and the PLL then synthesizes the required output frequency. A complete design also requires checking the PLL’s prescaler-input range, impedance, reference path, and phase-noise requirements.
When should I choose the ADF5002BCPZ-RL7 over another RF divider?
Choose the ADF5002BCPZ-RL7 when the design specifically needs a low-noise, low-power fixed divide-by-8 stage for signals up to 18 GHz and can use a 3.3 V differential 100 Ω output interface. Consider another divider when it offers a different division ratio, a wider frequency range, a different supply arrangement, or a simpler single-ended output. The choice should follow the PLL input requirements rather than generic prescaler similarity.
What are the key specifications of ADF5002BCPZ-RL7 that engineers should know?
The ADF5002BCPZ-RL7 is an 18 GHz maximum-input, fixed divide-by-8 RF prescaler operating from a 3.3 V supply. Its principal documented characteristics are differential 100 Ω RF outputs and an operating range of −40°C to +105°C. The part is packaged as a 16-lead WFQFN CSP with an exposed pad. These values define its role as a fixed microwave divider preceding a PLL, not a general-purpose programmable frequency synthesizer.
What is the output frequency of the ADF5002BCPZ-RL7?
The output frequency is the RF input frequency divided by 8. For example, an 8 GHz input produces a 1 GHz output, while an 18 GHz input produces a 2.25 GHz output. The calculation applies to the signal within the device’s specified operating limits. RF power, port matching, harmonics, and interaction with the downstream PLL still require separate evaluation.
How should the 3.3 V supply be connected to the ADF5002BCPZ-RL7?
The ADF5002BCPZ-RL7 operates from a 3.3 V supply, with the manufacturer test conditions specifying 3.3 V ±10%. Place the required supply-decoupling network close to the device and follow the exact pin and exposed-pad guidance in the ADF5002 datasheet. The exposed pad is part of the package construction and must be incorporated into the PCB land pattern and assembly process rather than treated as an optional exposed lead.
Where can I buy the ADF5002BCPZ-RL7 and what is its lead time?
Use the Request a Quote form on this page to request current availability, unit pricing, minimum order quantity, and lead time for the ADF5002BCPZ-RL7. The visible product records confirm demand and a listed unit price, but they do not provide a complete quantity-break table or a guaranteed stock position. The purchasing response should confirm the exact suffix, packaging option, and current manufacturing status.
Is the ADF5002BCPZ-RL7 RoHS compliant?
The ADF5002BCPZ-RL7 is listed as RoHS compliant in the product record for the exact MPN. Its operating temperature range is −40°C to +105°C, and it is not presented as an AEC-Q100-qualified automotive component. Other environmental declarations, including REACH status, conflict-minerals reporting, and halogen-free status, should be confirmed with Analog Devices through the Request a Quote form for formal procurement records.

Données de référence d'ingénierie pour ADF5002BCPZ-RL7 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the ADF5002BCPZ-RL7 when the signal chain specifically requires a fixed divide-by-8 operation, an input frequency up to 18 GHz, and a differential 100 Ω RF output into a compatible PLL or measurement block. Its 3.3 V supply and 16-lead exposed-pad package are appropriate for compact, controlled-impedance RF designs. Select a different prescaler when the system needs another division ratio, a wider input range, different output impedance, single-ended interfacing, or a different supply architecture. Do not substitute a divider solely because its headline frequency matches. Verify pin assignments, package dimensions, exposed-pad construction, RF input power, output level, return loss, isolation, and phase-noise contribution. For procurement, confirm that the suffix and reel configuration match the assembled board requirements and that any proposed replacement is approved through a formal engineering review.

Comparaison avec les alternatives

Paramètre Ce produit
Brand Analog Devices
Package 16-lead WFQFN CSP with exposed pad
Product Type Fixed RF prescaler
Maximum Input Frequency 18 GHz
Divide Ratio 8:1
Supply Voltage 3.3 V ±10%
Output Configuration Differential
Output Impedance 100 Ω differential
Operating Temperature Range −40°C to +105°C

Principaux différenciateurs

  • Fixed microwave division in a compact exposed-pad package (vs Generic programmable RF divider)
  • Direct interface to compatible PLL prescaler inputs (vs Single-ended RF divider)
  • Low-voltage operation for compact RF systems (vs Higher-supply prescaler)

Notes de conception

Treat the RF input and differential outputs as controlled-impedance transmission lines rather than ordinary low-frequency nets. Keep the input path and output routes short, minimize stubs and via transitions, and maintain a continuous reference plane beneath the RF traces. Provide interface structures that match the device’s single-ended input and 100 Ω differential output environment. Validate the final stack-up and geometry with electromagnetic or measurement data where the operating band makes connector and via parasitics significant.

Use the exact land pattern and exposed-pad connection method in the official ADF5002 datasheet. The exposed pad is integral to the 16-lead WFQFN CSP construction and must be incorporated into copper, solder, and assembly planning. Keep thermal-via placement consistent with the manufacturer land pattern while avoiding RF return-path discontinuities. Validate pad dimensions, solder-mask policy, paste volume, and reflow profile against the current package drawing before releasing the PCB.

The device operates from a 3.3 V supply, and the manufacturer’s test conditions specify a tolerance of ±10%. Place the required local decoupling capacitors at the supply and ground pins, with short, low-inductance connections and a solid ground reference. Check the downstream PLL’s supply requirements because the divider and PLL may need coordinated sequencing or filtering. Confirm actual supply noise at the pins rather than relying only on the nominal 3.3 V rail value.

Confirm the interface to the receiving PLL for allowable input power, impedance, bandwidth, isolation, and input-referred noise. Although the divider ratio and maximum input frequency may appear compatible, an unmatched output or excess signal level can degrade phase noise or overload the PLL input. Consider the output drive and downstream network together, and use the manufacturer’s application information as the starting point for component values and topology.

Do not interpret the ADF5002BCPZ and ADF5002BCPZ-RL7 records as proof of interchangeable procurement options without checking the ordering code, packing form, termination treatment, and reel details. Also avoid substituting a generic divider merely because it reaches a similar frequency. A true drop-in choice must match the package dimensions, pin assignments, exposed pad, supply, divide ratio, RF impedance, and operating limits.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The exact-MPN product record states RoHS compliance. No qualifying information establishes REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ADF5002BCPZ-RL7 datasheet ADF5002BCPZ-RL7 pinout ADF5002BCPZ-RL7 datasheet pdf ADF5002BCPZ-RL7 equivalent ADF5002BCPZ-RL7 replacement ADF5002BCPZ-RL7 cross reference ADF5002BCPZ-RL7 price ADF5002BCPZ-RL7 stock Analog Devices ADF5002BCPZ-RL7 ADF5002 18GHz divide by 8 prescaler ADF5002 WFQFN-16 pinout ADF5002 application circuit

Composants & termes associés

Analog Devices ADF5002BCPZ-RL7 ADF5002BCPZ ADF5002 ADF4156 ADF4106 RF prescaler fixed divider divide-by-8 phase-locked loop PLL frequency synthesizer 18 GHz 3.3 V differential RF output 100 Ω impedance WFQFN-16 LFCSP-16 exposed pad surface-mount package clock and timing IC semiconductor RoHS RF signal conditioning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ