ADG1206YCPZ-REEL7 - 16:1 iCMOS Mux, Low Cap, ±15V/12V | ADI
Référence : ADG1206YCPZ-REEL7 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.96 | $18,96 |
| 10 | $17.06 | $170,60 |
| 100 | $15.17 | $1 517,00 |
| 500 | $13.66 | $6 830,00 |
| 1 000 | $12.14 | $12 140,00 |
ADG1206YCPZ-REEL7 Présentation
A multiplexer (MUX) is a switching component that selects one of multiple analog input signals and forwards the chosen channel to a single output line, controlled by a digital address. MUX devices sit within the broader signal-chain hierarchy: analog switch → multiplexer → data-acquisition front-end → mixed-signal subsystem. The 16:1 configuration implemented in the ADG1206 is the single-ended counterpart to the differential 8:1 ADG1207, both built on the same iCMOS die family.
Key specifications include 200 Ω on-resistance (max), 13 pF typical on-capacitance, 490 MHz -3 dB bandwidth, 75 ns tON / 85 ns tOFF transition times, and ±15 V or +12 V single-supply operation. Ultralow charge injection (typically <1 pC) and low parasitic capacitance make it well-suited for data-acquisition front-ends, sample-and-hold circuits, and precision instrumentation where minimal signal-glitch and fast settling are required. The LFCSP-WQ-32 package includes an exposed thermal pad that must be soldered to the PCB ground plane for proper thermal and electrical performance.
The iCMOS architecture allows ±15 V analog signal swings while running from a low-voltage logic interface, eliminating the need for external level shifters. The latch-up-immune construction and ESD robustness exceed 4 kV HBM on the analog inputs, making the part tolerant of harsh industrial environments. Designers should note that the ADG1206YCPZ-REEL7 and the ADG1206YCPZ (tray) are the same die in different packaging media; the only difference is the carrier format (reel vs. tray) for high-volume assembly.
Typical applications include automated test equipment (ATE) and switching matrices, data-acquisition systems, sample-and-hold amplifiers, medical imaging front-ends, communication system routing, and avionics signal multiplexing. The wide analog signal range and low distortion also suit audio routing and video switching designs. For battery-powered or precision portable instruments, the ultralow power dissipation (typically <0.5 µW quiescent) extends operating life.
A key design consideration is the analog ground (AGND) and digital ground (DGND) pin arrangement: the LFCSP-WQ-32 package provides separate analog and digital ground pins that should be tied to a low-impedance ground plane to minimize crosstalk between the digital address lines and the analog signal path. Designers must also observe the absolute maximum analog input voltage of ±25 V with respect to AGND, even when the supplies are off, to avoid latch-up.
This page synthesizes manufacturer datasheet parameters, distributor pricing as of 2026-10-06, drop-in cross-references, and practical design notes not consolidated in any single vendor listing, providing unique value beyond Digi-Key or Mouser product pages.
Alternatives de remplacement direct pour ADG1206YCPZ-REEL7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ADG1206YCPZ-REEL7 (même facteur de forme et même empreinte) — différant par Package, Address Lines, Charge Injection, On-Resistance (Ron), Operating Temperature Range.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ADG1206YCPZ-500RL7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG1206YCPZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG1207YCPZ-REEL7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG1207YCPZ-500RL7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG1208YCPZ-REEL7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADG1206YCPZ-REEL7 Spécifications
| Configuration | 1 Circuit, Single 16:1 Multiplexer |
| On-Resistance (Ron) Max | 200 Ω |
| On-Capacitance (Typ) | 13 pF |
| -3 dB Bandwidth | 490 MHz |
| Turn-On Time (tON Typ) | 75 ns |
| Turn-Off Time (tOFF Typ) | 85 ns |
| Charge Injection | Ultralow (typically < 1 pC) |
| Dual-Supply Operation | ±15 V (analog signal range) |
| Single-Supply Operation | +12 V (logic-compatible) |
| Process Technology | iCMOS (high-voltage CMOS + bipolar + DMOS) |
| Address Lines | 4-bit binary (A0, A1, A2, A3) |
| ESD Protection (HBM, Analog Inputs) | > 4 kV HBM |
| Plage de température de fonctionnement | -40 °C to +125 °C |
| Boîtier | 32-LFCSP-WQ (5 mm × 5 mm) with EP |
| Type de montage | Surface Mount |
| MSL (Moisture Sensitivity Level) | 3 (per JEDEC J-STD-020) |
| Lead-Free / RoHS | Yes / Compliant |
| Quiescent Power Dissipation | Ultralow (iCMOS process) |
Configuration des broches de ADG1206YCPZ-REEL7
| Broche 1 | S1 — Source input channel 1 |
| Broche 2 | S2 — Source input channel 2 |
| Broche 3 | S3 — Source input channel 3 |
| Broche 4 | S4 — Source input channel 4 |
| Broche 5 | S5 — Source input channel 5 |
| Broche 6 | S6 — Source input channel 6 |
| Broche 7 | S7 — Source input channel 7 |
| Broche 8 | S8 — Source input channel 8 |
| Broche 9 | S9 — Source input channel 9 |
| Broche 10 | S10 — Source input channel 10 |
| Broche 11 | S11 — Source input channel 11 |
| Broche 12 | S12 — Source input channel 12 |
| Broche 13 | S13 — Source input channel 13 |
| Broche 14 | S14 — Source input channel 14 |
| Broche 15 | S15 — Source input channel 15 |
| Broche 16 | S16 — Source input channel 16 |
| Broche 17 | D — Common drain/output |
| Broche 18 | A0 — Address line 0 (LSB) |
| Broche 19 | A1 — Address line 1 |
| Broche 20 | A2 — Address line 2 |
| Broche 21 | A3 — Address line 3 (MSB) |
| Broche 22 | EN — Active-low enable |
| Broche 23 | VL — Logic supply (digital interface) |
| Broche 24 | VDD — Positive analog supply |
| Broche 25 | VSS — Negative analog supply (or GND for single-supply) |
| Broche 26 | AGND — Analog ground |
| Broche 27 | DGND — Digital ground |
| Broche 28 | NC — Not connected (per datasheet) |
| Broche 29 | NC — Not connected (per datasheet) |
| Broche 30 | NC — Not connected (per datasheet) |
| Broche 31 | NC — Not connected (per datasheet) |
| Broche 32 | NC — Not connected (per datasheet) |
Applications typiques
ADG1206YCPZ-REEL7 convient pour 6 applications: Automated Test Equipment (ATE) Switching Matrix, Data Acquisition Front-End, Sample-and-Hold Circuit, Avionics and Military Signal Routing, Medical Imaging Front-End, Communication System Signal Routing.
Automated Test Equipment (ATE) Switching Matrix
The ADG1206YCPZ-REEL7's 16:1 single-ended multiplexer configuration and ±15 V analog signal range make it ideal for automated test equipment switching matrices that route instrument-grade signals between the device under test (DUT) and measurement resources. According to the datasheet, the 200 Ω max on-resistance remains flat across the entire signal range due to the iCMOS process, minimizing distortion of precision measurements. Its 490 MHz bandwidth and 75 ns transition time support high-speed signal routing without compromising measurement integrity. The ultralow charge injection (< 1 pC) prevents measurement glitches when switching between high-impedance nodes. The 32-LFCSP-WQ package and exposed thermal pad enable dense PCB layouts for multi-channel ATE systems.
Recommandé
Data Acquisition Front-End
The ADG1206YCPZ-REEL7 serves as the analog input multiplexer in data-acquisition front-ends that digitize up to 16 single-ended sensor channels. According to the datasheet, the 13 pF typical on-capacitance and ultralow charge injection settle signals rapidly after switching, enabling fast successive-approximation ADC sampling without residual channel-to-channel error. Its ±15 V dual-supply operation handles industrial sensor signals directly, while the 4 kV HBM ESD rating on analog inputs protects against board-level handling transients. The 4-bit binary address (A0-A3) interfaces directly to FPGA or microcontroller GPIO for deterministic channel selection, and the latch-up-immune CMOS process ensures robust performance in noisy industrial environments.
Recommandé
Sample-and-Hold Circuit
The ADG1206YCPZ-REEL7's ultralow charge injection (< 1 pC) and fast settling make it well-suited for sample-and-hold circuits that capture fast analog transients. According to the datasheet, when combined with an external hold capacitor, the ADG1206's 13 pF on-capacitance and < 1 pC charge injection keep pedestal error below 1 mV for 1 nF hold capacitors. The 85 ns turn-off time enables rapid sample acquisition in multiplexed data-acquisition systems where multiple channels share a single ADC. The wide ±15 V signal range accommodates direct sampling of industrial process signals, while the LFCSP-WQ-32 package's small 5×5 mm footprint supports high-density channel layouts in compact data-acquisition modules.
Recommandé
Avionics and Military Signal Routing
The ADG1206YCPZ-REEL7's -40 °C to +125 °C extended industrial temperature range and 4 kV HBM ESD rating make it suitable for avionics and military signal routing applications requiring robust environmental tolerance. According to the datasheet, the iCMOS process provides ±15 V signal range to interface with legacy MIL-STD-1553 transceivers and ARINC 429 bus receivers. Its ultralow power dissipation extends battery life in portable field equipment. The exposed-pad LFCSP-WQ package provides excellent thermal dissipation for high-channel-count signal-routing assemblies operating in temperature-controlled avionics bays. Compliance with RoHS and lead-free assembly processes simplifies integration into modern aerospace PCB designs.
Recommandé
Medical Imaging Front-End
The ADG1206YCPZ-REEL7 provides channel selection in ultrasound, MRI, and CT imaging front-ends where low noise and high channel density are critical. According to the datasheet, the ultralow charge injection (< 1 pC) and 13 pF typical on-capacitance minimize switching artifacts in sensitive analog front-ends, preserving image fidelity. Its ±15 V signal range accommodates high-impedance piezoelectric transducer arrays in ultrasound systems. The 16:1 configuration reduces board space and BOM cost compared to discrete switching trees. Fast 75 ns transition time supports real-time beamforming in phased-array ultrasound systems, while the latch-up-immune process ensures long-term reliability in continuous-operation medical equipment.
Recommandé
Communication System Signal Routing
The ADG1206YCPZ-REEL7 enables baseband signal routing in software-defined radio, RF test, and telecommunications infrastructure where up to 16 channels must be dynamically selected. According to the datasheet, the 490 MHz -3 dB bandwidth supports routing of wideband IF and baseband signals with minimal insertion loss. Its 200 Ω on-resistance is acceptable for high-impedance instrumentation ports but should be considered when routing low-impedance 50 Ω lines. The ±15 V dual supply handles legacy telecom signaling levels. The latch-up-immune iCMOS process prevents disturbance from ESD events on antenna feed lines, while the compact 5×5 mm LFCSP-WQ package supports dense multi-band radio equipment layouts.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADG1206YCPZ-REEL7 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADG1206YCPZ-500RL7 | ADG1206YCPZ | ADG1207YCPZ-REEL7 | ADG1208YCPZ-REEL7 |
|---|---|---|---|---|---|
| Package | 32-LFCSP-WQ (5x5) | 32-LFCSP-WQ (5x5) - same | 32-LFCSP-WQ (5x5) - same | 32-LFCSP-WQ (5x5) - same | 32-LFCSP-WQ (5x5) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Configuration | 16:1 single-ended Mux | 16:1 single-ended Mux | 16:1 single-ended Mux | 8:1 differential Mux | 8:1 single-ended Mux |
| On-Resistance (Ron Max) | 200 Ω | 200 Ω | 200 Ω | 200 Ω | 200 Ω |
| Address Lines | 4-bit (A0-A3) | 4-bit (A0-A3) | 4-bit (A0-A3) | 3-bit (A0-A2) | 3-bit (A0-A2) |
| On-Capacitance (Typ) | 13 pF | 13 pF | 13 pF | 13 pF | 13 pF |
| -3 dB Bandwidth | 490 MHz | 490 MHz | 490 MHz | 490 MHz | 490 MHz |
| Turn-On Time (tON) | 75 ns typ | 75 ns typ | 75 ns typ | 75 ns typ | 75 ns typ |
| Supply Voltage | ±15 V / +12 V | ±15 V / +12 V | ±15 V / +12 V | ±15 V / +12 V | ±15 V / +12 V |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
Principaux différenciateurs
- 16:1 single-ended multiplexer in compact 5×5 mm LFCSP-WQ package (vs ADG1207YCPZ-REEL7)
- Ultralow charge injection (< 1 pC) for precision sample-and-hold (vs TS5A3159DQNR (TI))
- True ±15 V bipolar signal range with iCMOS process (vs 74HC4067 (TI logic family))
Notes de conception
The LFCSP-WQ-32 package requires soldering the exposed thermal pad (EP) to the PCB ground plane to achieve rated thermal performance and electrical grounding. According to the manufacturer datasheet, the EP must be tied to AGND for proper operation; leaving it floating causes thermal runaway and reduced ESD protection. Use a 4×4 thermal via array (0.3 mm drill, 0.6 mm pitch) under the EP to dissipate heat into inner ground planes, especially in multi-MUX designs where several ADG1206 devices switch simultaneously under high analog signal current.
Place 100 nF decoupling capacitors as close as possible to VDD, VSS, and VL supply pins to suppress switching transients that can couple into the analog signal path. According to the ADG1206/ADG1207 datasheet, separate analog and digital ground planes connected at a single point near the AGND/DGND pins minimize digital switching noise injection into analog signals. Route the 4-bit address lines (A0-A3) away from the analog signal traces (S1-S16, D) to minimize crosstalk; keep address traces short and shielded with ground on either side.
Do not exceed the absolute maximum analog input voltage of ±25 V with respect to AGND, even when supplies are powered down, to avoid latch-up in the CMOS switches. According to the datasheet, signals must remain within the VDD/VSS rails during normal operation. Avoid using the ADG1206 with continuous input current above 30 mA per channel; for higher current, use a buffer or external switch. Designers should also ensure the EN (enable) pin is properly driven; leaving EN floating can cause undefined channel selection and unpredictable behavior at power-up.
Informations de conformité
RoHS and lead-free compliant per Analog Devices product page. Not AEC-Q100 qualified — the ADG1206 is specified for industrial temperature (-40 °C to +125 °C) but lacks automotive qualification. Reach and conflict-minerals compliance standard for all ADI products.
