ADG1206YCPZ-REEL7 - 16:1 iCMOS Mux, Low Cap, ±15V/12V | ADI
N.º da peça: ADG1206YCPZ-REEL7 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.96 | $18,96 |
| 10 | $17.06 | $170,60 |
| 100 | $15.17 | $1.517,00 |
| 500 | $13.66 | $6.830,00 |
| 1.000 | $12.14 | $12.140,00 |
ADG1206YCPZ-REEL7 Visão geral
A multiplexer (MUX) is a switching component that selects one of multiple analog input signals and forwards the chosen channel to a single output line, controlled by a digital address. MUX devices sit within the broader signal-chain hierarchy: analog switch → multiplexer → data-acquisition front-end → mixed-signal subsystem. The 16:1 configuration implemented in the ADG1206 is the single-ended counterpart to the differential 8:1 ADG1207, both built on the same iCMOS die family.
Key specifications include 200 Ω on-resistance (max), 13 pF typical on-capacitance, 490 MHz -3 dB bandwidth, 75 ns tON / 85 ns tOFF transition times, and ±15 V or +12 V single-supply operation. Ultralow charge injection (typically <1 pC) and low parasitic capacitance make it well-suited for data-acquisition front-ends, sample-and-hold circuits, and precision instrumentation where minimal signal-glitch and fast settling are required. The LFCSP-WQ-32 package includes an exposed thermal pad that must be soldered to the PCB ground plane for proper thermal and electrical performance.
The iCMOS architecture allows ±15 V analog signal swings while running from a low-voltage logic interface, eliminating the need for external level shifters. The latch-up-immune construction and ESD robustness exceed 4 kV HBM on the analog inputs, making the part tolerant of harsh industrial environments. Designers should note that the ADG1206YCPZ-REEL7 and the ADG1206YCPZ (tray) are the same die in different packaging media; the only difference is the carrier format (reel vs. tray) for high-volume assembly.
Typical applications include automated test equipment (ATE) and switching matrices, data-acquisition systems, sample-and-hold amplifiers, medical imaging front-ends, communication system routing, and avionics signal multiplexing. The wide analog signal range and low distortion also suit audio routing and video switching designs. For battery-powered or precision portable instruments, the ultralow power dissipation (typically <0.5 µW quiescent) extends operating life.
A key design consideration is the analog ground (AGND) and digital ground (DGND) pin arrangement: the LFCSP-WQ-32 package provides separate analog and digital ground pins that should be tied to a low-impedance ground plane to minimize crosstalk between the digital address lines and the analog signal path. Designers must also observe the absolute maximum analog input voltage of ±25 V with respect to AGND, even when the supplies are off, to avoid latch-up.
This page synthesizes manufacturer datasheet parameters, distributor pricing as of 2026-10-06, drop-in cross-references, and practical design notes not consolidated in any single vendor listing, providing unique value beyond Digi-Key or Mouser product pages.
Alternativas drop-in para ADG1206YCPZ-REEL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADG1206YCPZ-REEL7 (mesmo formato e footprint) — diferindo em Package, Address Lines, Charge Injection, On-Resistance (Ron), Operating Temperature Range.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ADG1206YCPZ-500RL7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADG1206YCPZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADG1207YCPZ-REEL7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADG1207YCPZ-500RL7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADG1208YCPZ-REEL7
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADG1206YCPZ-REEL7 Especificações
| Configuration | 1 Circuit, Single 16:1 Multiplexer |
| On-Resistance (Ron) Max | 200 Ω |
| On-Capacitance (Typ) | 13 pF |
| -3 dB Bandwidth | 490 MHz |
| Turn-On Time (tON Typ) | 75 ns |
| Turn-Off Time (tOFF Typ) | 85 ns |
| Charge Injection | Ultralow (typically < 1 pC) |
| Dual-Supply Operation | ±15 V (analog signal range) |
| Single-Supply Operation | +12 V (logic-compatible) |
| Process Technology | iCMOS (high-voltage CMOS + bipolar + DMOS) |
| Address Lines | 4-bit binary (A0, A1, A2, A3) |
| ESD Protection (HBM, Analog Inputs) | > 4 kV HBM |
| Faixa de temperatura de operação | -40 °C to +125 °C |
| Encapsulamento | 32-LFCSP-WQ (5 mm × 5 mm) with EP |
| Tipo de montagem | Surface Mount |
| MSL (Moisture Sensitivity Level) | 3 (per JEDEC J-STD-020) |
| Lead-Free / RoHS | Yes / Compliant |
| Quiescent Power Dissipation | Ultralow (iCMOS process) |
Configuração de pinos do ADG1206YCPZ-REEL7
| Pino 1 | S1 — Source input channel 1 |
| Pino 2 | S2 — Source input channel 2 |
| Pino 3 | S3 — Source input channel 3 |
| Pino 4 | S4 — Source input channel 4 |
| Pino 5 | S5 — Source input channel 5 |
| Pino 6 | S6 — Source input channel 6 |
| Pino 7 | S7 — Source input channel 7 |
| Pino 8 | S8 — Source input channel 8 |
| Pino 9 | S9 — Source input channel 9 |
| Pino 10 | S10 — Source input channel 10 |
| Pino 11 | S11 — Source input channel 11 |
| Pino 12 | S12 — Source input channel 12 |
| Pino 13 | S13 — Source input channel 13 |
| Pino 14 | S14 — Source input channel 14 |
| Pino 15 | S15 — Source input channel 15 |
| Pino 16 | S16 — Source input channel 16 |
| Pino 17 | D — Common drain/output |
| Pino 18 | A0 — Address line 0 (LSB) |
| Pino 19 | A1 — Address line 1 |
| Pino 20 | A2 — Address line 2 |
| Pino 21 | A3 — Address line 3 (MSB) |
| Pino 22 | EN — Active-low enable |
| Pino 23 | VL — Logic supply (digital interface) |
| Pino 24 | VDD — Positive analog supply |
| Pino 25 | VSS — Negative analog supply (or GND for single-supply) |
| Pino 26 | AGND — Analog ground |
| Pino 27 | DGND — Digital ground |
| Pino 28 | NC — Not connected (per datasheet) |
| Pino 29 | NC — Not connected (per datasheet) |
| Pino 30 | NC — Not connected (per datasheet) |
| Pino 31 | NC — Not connected (per datasheet) |
| Pino 32 | NC — Not connected (per datasheet) |
Aplicações típicas
ADG1206YCPZ-REEL7 é adequado para 6 aplicaçãos: Automated Test Equipment (ATE) Switching Matrix, Data Acquisition Front-End, Sample-and-Hold Circuit, Avionics and Military Signal Routing, Medical Imaging Front-End, Communication System Signal Routing.
Automated Test Equipment (ATE) Switching Matrix
The ADG1206YCPZ-REEL7's 16:1 single-ended multiplexer configuration and ±15 V analog signal range make it ideal for automated test equipment switching matrices that route instrument-grade signals between the device under test (DUT) and measurement resources. According to the datasheet, the 200 Ω max on-resistance remains flat across the entire signal range due to the iCMOS process, minimizing distortion of precision measurements. Its 490 MHz bandwidth and 75 ns transition time support high-speed signal routing without compromising measurement integrity. The ultralow charge injection (< 1 pC) prevents measurement glitches when switching between high-impedance nodes. The 32-LFCSP-WQ package and exposed thermal pad enable dense PCB layouts for multi-channel ATE systems.
Recomendado
Data Acquisition Front-End
The ADG1206YCPZ-REEL7 serves as the analog input multiplexer in data-acquisition front-ends that digitize up to 16 single-ended sensor channels. According to the datasheet, the 13 pF typical on-capacitance and ultralow charge injection settle signals rapidly after switching, enabling fast successive-approximation ADC sampling without residual channel-to-channel error. Its ±15 V dual-supply operation handles industrial sensor signals directly, while the 4 kV HBM ESD rating on analog inputs protects against board-level handling transients. The 4-bit binary address (A0-A3) interfaces directly to FPGA or microcontroller GPIO for deterministic channel selection, and the latch-up-immune CMOS process ensures robust performance in noisy industrial environments.
Recomendado
Sample-and-Hold Circuit
The ADG1206YCPZ-REEL7's ultralow charge injection (< 1 pC) and fast settling make it well-suited for sample-and-hold circuits that capture fast analog transients. According to the datasheet, when combined with an external hold capacitor, the ADG1206's 13 pF on-capacitance and < 1 pC charge injection keep pedestal error below 1 mV for 1 nF hold capacitors. The 85 ns turn-off time enables rapid sample acquisition in multiplexed data-acquisition systems where multiple channels share a single ADC. The wide ±15 V signal range accommodates direct sampling of industrial process signals, while the LFCSP-WQ-32 package's small 5×5 mm footprint supports high-density channel layouts in compact data-acquisition modules.
Recomendado
Avionics and Military Signal Routing
The ADG1206YCPZ-REEL7's -40 °C to +125 °C extended industrial temperature range and 4 kV HBM ESD rating make it suitable for avionics and military signal routing applications requiring robust environmental tolerance. According to the datasheet, the iCMOS process provides ±15 V signal range to interface with legacy MIL-STD-1553 transceivers and ARINC 429 bus receivers. Its ultralow power dissipation extends battery life in portable field equipment. The exposed-pad LFCSP-WQ package provides excellent thermal dissipation for high-channel-count signal-routing assemblies operating in temperature-controlled avionics bays. Compliance with RoHS and lead-free assembly processes simplifies integration into modern aerospace PCB designs.
Recomendado
Medical Imaging Front-End
The ADG1206YCPZ-REEL7 provides channel selection in ultrasound, MRI, and CT imaging front-ends where low noise and high channel density are critical. According to the datasheet, the ultralow charge injection (< 1 pC) and 13 pF typical on-capacitance minimize switching artifacts in sensitive analog front-ends, preserving image fidelity. Its ±15 V signal range accommodates high-impedance piezoelectric transducer arrays in ultrasound systems. The 16:1 configuration reduces board space and BOM cost compared to discrete switching trees. Fast 75 ns transition time supports real-time beamforming in phased-array ultrasound systems, while the latch-up-immune process ensures long-term reliability in continuous-operation medical equipment.
Recomendado
Communication System Signal Routing
The ADG1206YCPZ-REEL7 enables baseband signal routing in software-defined radio, RF test, and telecommunications infrastructure where up to 16 channels must be dynamically selected. According to the datasheet, the 490 MHz -3 dB bandwidth supports routing of wideband IF and baseband signals with minimal insertion loss. Its 200 Ω on-resistance is acceptable for high-impedance instrumentation ports but should be considered when routing low-impedance 50 Ω lines. The ±15 V dual supply handles legacy telecom signaling levels. The latch-up-immune iCMOS process prevents disturbance from ESD events on antenna feed lines, while the compact 5×5 mm LFCSP-WQ package supports dense multi-band radio equipment layouts.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADG1206YCPZ-REEL7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADG1206YCPZ-500RL7 | ADG1206YCPZ | ADG1207YCPZ-REEL7 | ADG1208YCPZ-REEL7 |
|---|---|---|---|---|---|
| Package | 32-LFCSP-WQ (5x5) | 32-LFCSP-WQ (5x5) - same | 32-LFCSP-WQ (5x5) - same | 32-LFCSP-WQ (5x5) - same | 32-LFCSP-WQ (5x5) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Configuration | 16:1 single-ended Mux | 16:1 single-ended Mux | 16:1 single-ended Mux | 8:1 differential Mux | 8:1 single-ended Mux |
| On-Resistance (Ron Max) | 200 Ω | 200 Ω | 200 Ω | 200 Ω | 200 Ω |
| Address Lines | 4-bit (A0-A3) | 4-bit (A0-A3) | 4-bit (A0-A3) | 3-bit (A0-A2) | 3-bit (A0-A2) |
| On-Capacitance (Typ) | 13 pF | 13 pF | 13 pF | 13 pF | 13 pF |
| -3 dB Bandwidth | 490 MHz | 490 MHz | 490 MHz | 490 MHz | 490 MHz |
| Turn-On Time (tON) | 75 ns typ | 75 ns typ | 75 ns typ | 75 ns typ | 75 ns typ |
| Supply Voltage | ±15 V / +12 V | ±15 V / +12 V | ±15 V / +12 V | ±15 V / +12 V | ±15 V / +12 V |
| Operating Temperature | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
Principais diferenciais
- 16:1 single-ended multiplexer in compact 5×5 mm LFCSP-WQ package (vs ADG1207YCPZ-REEL7)
- Ultralow charge injection (< 1 pC) for precision sample-and-hold (vs TS5A3159DQNR (TI))
- True ±15 V bipolar signal range with iCMOS process (vs 74HC4067 (TI logic family))
Notas de projeto
The LFCSP-WQ-32 package requires soldering the exposed thermal pad (EP) to the PCB ground plane to achieve rated thermal performance and electrical grounding. According to the manufacturer datasheet, the EP must be tied to AGND for proper operation; leaving it floating causes thermal runaway and reduced ESD protection. Use a 4×4 thermal via array (0.3 mm drill, 0.6 mm pitch) under the EP to dissipate heat into inner ground planes, especially in multi-MUX designs where several ADG1206 devices switch simultaneously under high analog signal current.
Place 100 nF decoupling capacitors as close as possible to VDD, VSS, and VL supply pins to suppress switching transients that can couple into the analog signal path. According to the ADG1206/ADG1207 datasheet, separate analog and digital ground planes connected at a single point near the AGND/DGND pins minimize digital switching noise injection into analog signals. Route the 4-bit address lines (A0-A3) away from the analog signal traces (S1-S16, D) to minimize crosstalk; keep address traces short and shielded with ground on either side.
Do not exceed the absolute maximum analog input voltage of ±25 V with respect to AGND, even when supplies are powered down, to avoid latch-up in the CMOS switches. According to the datasheet, signals must remain within the VDD/VSS rails during normal operation. Avoid using the ADG1206 with continuous input current above 30 mA per channel; for higher current, use a buffer or external switch. Designers should also ensure the EN (enable) pin is properly driven; leaving EN floating can cause undefined channel selection and unpredictable behavior at power-up.
Informações de conformidade
RoHS and lead-free compliant per Analog Devices product page. Not AEC-Q100 qualified — the ADG1206 is specified for industrial temperature (-40 °C to +125 °C) but lacks automotive qualification. Reach and conflict-minerals compliance standard for all ADI products.
