Texas Instruments

ADS7230IPW - 12-Bit 2-Channel 1MSPS SAR ADC | Texas Instruments

Référence : ADS7230IPW ✓ Actif
16-pin TSSOP Package
MOQ : 1 |

ADS7230IPW Présentation

Texas Instruments ADS7230IPW is a low-power, 12-bit, 2-channel, 1 MSPS successive-approximation-register analog-to-digital converter with unipolar inputs and a serial interface, housed in a 16-pin TSSOP package. It supports one million conversions per second while combining a 2-to-1 analog input multiplexer, inherent sample-and-hold circuitry, and programmable channel-tag output functionality.

An ADC is an analog-to-digital converter, a semiconductor that transforms continuous voltage signals into numeric codes for digital processing. A SAR ADC compares the sampled input with a capacitor-based internal DAC through successive approximation, providing predictable conversion timing and straightforward digital control. Within the hierarchy of data-converter ICs, data converters, and analog signal-processing semiconductors, the ADS7230 supports compact acquisition systems that need moderate resolution and rapid sampling.

The ADS7230's principal characteristics include 12-bit resolution, two selectable unipolar input channels, a 1 MSPS conversion rate, and a serial interface. Its 2-to-1 multiplexer allows one converter to monitor two analog sources without duplicating the conversion core. The programmable TAG bit output option identifies the selected input when the host processor receives conversion data, helping associate each sample with its signal source.

The device uses a capacitor-based SAR conversion core with inherent sample-and-hold behavior. This architecture is suitable for instrumentation, industrial monitoring, and embedded measurement systems where a low-power ADC must acquire changing analog inputs while the controller reads results through a serial connection. The ADS7230 shares its conversion core with the single-channel ADS7229, while adding the ADS7230's two-to-one input multiplexer and programmable TAG option.

Typical uses include dual-sensor monitoring, process-control data acquisition, battery-powered measurement instruments, industrial interface modules, and embedded control systems. Two analog channels can be sampled sequentially through the internal multiplexer, reducing component count when a design must observe two related unipolar signals.

When laying out the circuit, place input and reference-network components close to their associated pins, route the serial interface away from sensitive analog inputs, and provide a stable reference and supply arrangement. Confirm acquisition timing, serial-interface mode, input range, and the required external components against the manufacturer datasheet before finalizing the schematic and PCB.

Alternatives de remplacement direct pour ADS7230IPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

ADS7230IPW Valeurs maximales et caractéristiques électriques

Résolution 12 bit
Conversion Rate 1 MSPS
Analog Input Channels 2 channels
Input Multiplexer 2-to-1 MUX
Input Type Single/dual unipolar input
ADC Architecture Capacitor-based SAR with inherent sample-and-hold
Digital Interface Serial interface
Programmable TAG Output Supported
Boîtier 16-pin TSSOP
Type de montage Surface mount
Power Class Low-power ADC

Guide de configuration des broches du ADS7230IPW 16-pin tssop

Configuration des broches du ADS7230IPW (boîtier 16-pin tssop). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 16-pin tssop pour le ADS7230IPW

Aucune donnée de brochage détaillée disponible pour ADS7230IPW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADS7230IPW convient pour 6 applications: Dual-Sensor Monitoring, Industrial Process Measurement, Battery-Powered Measurement Instruments, Embedded Control Systems, Power and Battery Monitoring, Laboratory Data Acquisition.

🧩

Dual-Sensor Monitoring

The ADS7230IPW fits dual-sensor monitoring because its 2-to-1 multiplexer can select between two unipolar analog inputs while the 12-bit SAR core converts at up to 1 MSPS. Place the converter between conditioned sensor outputs and the controller, then use the serial interface to retrieve each code. The programmable TAG option can identify the selected input, reducing software ambiguity when two measurements are acquired sequentially. Compared with using two separate ADC packages, this approach simplifies the board footprint, although channel switching means the two sources are not sampled at exactly the same instant.

🏭

Industrial Process Measurement

ADS7230IPW is suitable for industrial process measurement when two conditioned, unipolar signals must be digitized into a compact controller interface. Its 12-bit resolution provides 4096 numerical codes across the selected input range, while the 1 MSPS SAR conversion rate supports rapid sampling of slowly changing process quantities. Use the internal channel multiplexer to reduce converter count, and add suitable input protection and filtering before the ADC pins. The serial interface keeps the digital connection compact, but reference stability and analog grounding remain important to repeatable measurements.

📱

Battery-Powered Measurement Instruments

The low-power ADS7230IPW architecture is appropriate for portable measurement instruments that sample more than one unipolar sensor signal. The 12-bit converter operates at up to 1 MSPS, allowing acquisition timing to be configured around the application's actual bandwidth rather than operating continuously at the maximum rate. Its serial interface supports integration with an embedded controller, while the multiplexer minimizes package count. Power budget calculations should include both active conversion consumption and the time the controller spends acquiring, processing, and displaying the samples.

🔧

Embedded Control Systems

ADS7230IPW works well as an analog front end for embedded control systems that monitor two external inputs and need compact serialized results. The SAR conversion process provides a defined acquisition event, and the TAG output can support deterministic channel labeling in firmware. Use the converter to digitize potentiometer positions, divider outputs, or conditioned sensor levels, then transmit the result over the serial interface. Validate the controller's timing against the manufacturer interface diagrams, especially when using hardware triggering or interrupt-driven conversion.

⚡

Power and Battery Monitoring

ADS7230IPW can digitize two scaled, unipolar power-monitoring signals in equipment where voltage and current must both be observed. Conditioning dividers or amplifiers can map each quantity into the converter's supported input range, after which the 2-to-1 multiplexer samples the channels sequentially. The 12-bit resolution and 1 MSPS capability provide more conversion timing headroom than many low-rate monitoring loops require. Carefully separate the analog input routing from switching-current paths and use the manufacturer reference arrangement for supply and reference stability.

🖥️

Laboratory Data Acquisition

ADS7230IPW supports compact laboratory acquisition modules that need two unipolar inputs, 12-bit numeric resolution, and a serial data path. The 1 MSPS SAR conversion rate is suitable for many sensor, potentiometer, and slow waveform measurement tasks, and the programmable TAG bit helps the acquisition software identify each converted channel. Place input conditioning close to the device, keep the serial traces away from sensitive analog nodes, and account for channel-switching time in the sample schedule. The manufacturer datasheet should define the supported serial modes and trigger behavior used by the instrument firmware.

Récapitulatif des produits recommandés

ADS7229 Single-channel ADC sharing the ADS7230 conversion core Utilisé dans : Dual-Sensor Monitoring, Industrial Process Measurement, Battery-Powered Measurement Instruments, Embedded Control Systems, Power and Battery Monitoring, Laboratory Data Acquisition ADS7230IPW Texas Instruments Utilisé dans : Dual-Sensor Monitoring, Industrial Process Measurement, Battery-Powered Measurement Instruments, Embedded Control Systems, Power and Battery Monitoring, Laboratory Data Acquisition
What are the key specifications of ADS7230IPW that engineers should know?
The ADS7230IPW is a 12-bit, 2-channel, 1 MSPS SAR ADC with unipolar inputs and a serial interface. It includes a 2-to-1 input multiplexer and programmable TAG-bit output, allowing a controller to identify the source of each converted sample. According to the Texas Instruments product page and manufacturer datasheet, its 16-pin TSSOP package and low-power design suit compact acquisition and monitoring systems.
Where can I download the ADS7230IPW datasheet PDF?
The ADS7230IPW datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/ADS7230. The manufacturer document is the appropriate source for the complete pin description, electrical characteristics, serial-interface timing, input-range details, application circuit, and recommended external components. Use the product ordering page at https://www.ti.com/product/ADS7230/part-details/ADS7230IPW to confirm the exact package and ordering information.
Where can I find the ADS7230IPW pinout?
Use the pin-description table and package drawing in the Texas Instruments ADS7230 datasheet to locate the ADS7230IPW pinout. The verified manufacturer listing identifies the component as a 16-pin TSSOP, but it does not publish individual terminal names in the page text. Consequently, the full numbered pinout is not reproduced here. Cross-check signal names, exposed functions, and recommended decoupling connections against the manufacturer pin-description table.
What can replace the ADS7230IPW as a drop-in ADC?
No drop-in replacement is established by the available manufacturer and distributor information. The ADS7230IPWR is an orderable tape-and-reel representation of the same device, but it is not a distinct engineering alternative. The single-channel ADS7229 shares the conversion core but does not provide the ADS7230's two-channel multiplexer, so it should not be treated as a pin-compatible substitute without a design review.
Is the ADS7230IPW suitable for dual-sensor monitoring?
Yes, the ADS7230IPW is suitable for dual-sensor monitoring because it combines two unipolar analog input channels with a 2-to-1 multiplexer and a 12-bit, 1 MSPS conversion core. According to the Texas Instruments product page, the programmable TAG-bit output can identify the selected input. This arrangement can reduce the number of ADC packages required when two related analog quantities must be measured sequentially.
What is the difference between ADS7230IPW and ADS7229?
The ADS7230IPW provides two selectable unipolar input channels through a 2-to-1 multiplexer and supports a programmable TAG-bit output. The ADS7229 uses the same basic 12-bit, 1 MSPS SAR core but is described as a unipolar-input ADC with one channel. The shared core does not make the devices automatically pin-compatible, so confirm the complete ADS7229 terminal map and acquisition timing before considering a board-level substitution.
When should I choose ADS7230IPW instead of a single-channel ADC?
Choose the ADS7230IPW when the design must acquire two unipolar analog quantities and can multiplex them through one converter. Its 12-bit resolution, 1 MSPS rate, and programmable TAG option provide a compact way to sample multiple sensors while retaining a serial digital interface. Select a single-channel ADC instead when the source signals must be sampled simultaneously, require independent converters, or have electrical characteristics that do not suit the multiplexed input.
How do I choose between ADS7230IPW and a higher-resolution ADC?
Choose the ADS7230IPW when 12-bit resolution and 1 MSPS conversion speed are sufficient for the measurement and a two-channel multiplexer is useful. Consider a higher-resolution ADC when the sensor output includes meaningful signal information below the 12-bit quantization level or when system accuracy requires a finer LSB size. The conversion rate alone does not determine suitability; noise, input range, reference accuracy, and acquisition bandwidth must also match the source.
Can ADS7230IPW replace ADS7830IPWR?
The ADS7230IPW should not be assumed to replace ADS7830IPWR without a complete pin and timing comparison. The available manufacturer information confirms that ADS7230IPW is a 12-bit, two-channel, 1 MSPS SAR ADC in a 16-pin TSSOP, but it does not establish that ADS7830IPWR has an identical terminal arrangement, reference interface, acquisition timing, or serial protocol. Treat the two as distinct devices until their manufacturer pinouts and electrical tables are matched.
Where can I buy ADS7230IPW online?
Use the Request a Quote form on this page to request ADS7230IPW availability, current lead time, and a formal quotation for the exact 16-pin TSSOP ordering code. The listing identifies ADS7230IPW as a Texas Instruments 12-bit, two-channel, 1 MSPS SAR ADC, so quote the complete MPN and package rather than the broader ADS7230 series designation. Packaging options and delivery schedules should be confirmed during quotation.
What is the price of ADS7230IPW?
Request a current ADS7230IPW quotation through the Request a Quote form on this page. The commercial offer is handled as a quote-on-request listing, so the current unit cost, volume breaks, currency, and stock position should be confirmed for the exact 16-pin TSSOP part number. The form is the appropriate route for obtaining a transaction-ready price and lead-time response.
Is ADS7230IPW in stock and what is its lead time?
ADS7230IPW availability and lead time should be confirmed through the Request a Quote form on this page. Stock can vary by package, shipping destination, production allocation, and order quantity, so a listing-level availability statement is not sufficient for a production commitment. Enter the exact MPN ADS7230IPW and request the current delivery schedule and minimum order quantity with the quotation.
What is the best Texas Instruments equivalent for ADS7230IPW?
The closest documented Texas Instruments relative is ADS7230IPWR, which represents the same ADS7230 device in a tape-and-reel orderable configuration. It is not presented as a distinct functional replacement because its electrical design and pin arrangement remain the same. The ADS7229 is only a functional relative because it shares the conversion core but lacks the ADS7230's two-channel multiplexer.
How is ADS7230IPW used for industrial process monitoring?
ADS7230IPW can monitor two unipolar process signals through its 2-to-1 multiplexer, sampling each through a 12-bit SAR conversion process at up to 1 MSPS. A serial interface transfers the resulting codes to a controller, while the programmable TAG option identifies the selected channel. In an industrial design, use protected input conditioning, a stable reference, and careful grounding so that sensor excitation and switching equipment do not degrade measurement accuracy.
Does ADS7230IPW meet RoHS and REACH requirements?
The RoHS and REACH status of ADS7230IPW cannot be confirmed from the manufacturer page text identified for this part. Check the current Texas Instruments product-page compliance and material declarations, along with the exact ordering code and manufacturing site, before making a purchasing declaration. Do not infer lead-free, halogen-free, or conflict-minerals status solely from the package family or ADC technology.

Données de référence d'ingénierie pour ADS7230IPW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADS7230IPW when the design requires two unipolar analog inputs, 12-bit resolution, and conversion capability up to 1 MSPS in a compact 16-pin TSSOP. It is especially useful when sequential sampling is acceptable and the programmable TAG output can simplify channel identification. Choose a single-channel ADC when the two signals must be sampled simultaneously or when the selected ADC offers a different input range, reference architecture, or serial protocol. ADS7229 is a useful functional comparison because it shares the conversion core, but its single-channel architecture means it is not a direct substitute for the ADS7230's two-channel multiplexer. Before committing to a replacement, compare every pin, supply requirement, acquisition timing, and serial-interface signal against the manufacturer datasheets.

Comparaison avec les alternatives

Paramètre Ce produit
Package 16-pin TSSOP
Brand Texas Instruments
Resolution 12 bit
Conversion Rate 1 MSPS
Analog Input Channels 2 channels
Input Multiplexer 2-to-1 MUX
ADC Architecture Capacitor-based SAR with inherent sample-and-hold
Digital Interface Serial interface
Programmable TAG Output Supported
Input Type Single/dual unipolar input

Principaux différenciateurs

  • Dual-channel acquisition in one ADC (vs ADS7229)
  • Programmable source identification (vs ADS7229)
  • Shared high-speed SAR conversion core (vs ADS7229)

Notes de conception

Route each analog input directly to its ADC pin through a compact conditioning network, and keep the serial-interface traces away from those input nodes. Place the reference and supply bypass components close to their associated pins, with short ground returns and a quiet analog ground region. Because the ADS7230 multiplexes two channels, asymmetric trace lengths and input leakage can create channel-dependent offsets; use matched layouts where measurements must agree closely.

Treat both analog inputs as potentially high-impedance nodes until the complete input-network impedance is known. Keep leakage paths away from the input pins, verify settling after multiplexer selection, and apply an appropriate acquisition time for the source impedance. If the signals carry substantial high-frequency content, place the anti-alias filter close to the converter so switching transients and controller activity do not fold into the measured bandwidth.

Do not assume that a shared SAR core makes different ADS72xx devices pin-compatible. The ADS7229 is single-channel, while ADS7230IPW includes a 2-to-1 multiplexer and TAG function, so verify every terminal, supply sequence, reference connection, and serial timing signal against the exact manufacturer datasheet. Also confirm the operating input range before scaling sensor outputs; the channel multiplexing alone does not allow arbitrary bipolar or negative signals to be connected directly.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance status was not stated on the identified manufacturer and distributor pages. Confirm current declarations for the exact ADS7230IPW ordering code and manufacturing site.

Données vérifiées le : 2026-11-18 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ADS7230IPW datasheet ADS7230IPW pinout ADS7230IPW datasheet pdf ADS7230IPW specifications ADS7230IPW equivalent ADS7230IPW replacement ADS7230IPW cross reference ADS7230IPW footprint ADS7230IPW price ADS7230IPW stock Texas Instruments ADS7230IPW ADS7230IPW vs ADS7229 ADS7230IPW vs ADS7830IPWR 16-TSSOP dual channel ADC ADS7230IPW industrial monitoring

Composants & termes associés

Texas Instruments ADS7230IPW ADS7229 ADS7230IPWR ADS7830IPWR analog-to-digital converter ADC data-converter IC successive-approximation register SAR ADC sample-and-hold 2-to-1 input multiplexer unipolar analog input serial interface programmable TAG bit 12-bit resolution 1 MSPS conversion rate TSSOP-16 surface-mount package industrial process monitoring dual-sensor monitoring analog signal conditioning reference voltage embedded control system
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ