Texas Instruments

ADS7820U - 12-Bit 100 kSPS ADC | Texas Instruments

Référence : ADS7820U ✓ Actif
+5 V single supply Vdss 28-pin SOIC Package
MOQ : 1 |

ADS7820U Présentation

The Texas Instruments ADS7820U is a 12-bit, 10 µs sampling CMOS analog-to-digital converter designed for single +5 V operation and input signals up to +5 V. It supports a minimum sampling rate of 100 kSPS, provides 72 dB minimum SINAD with a 45 kHz input, and limits integral and differential nonlinearity to ±1/2 LSB. The device is packaged in a 28-pin SOIC and uses a successive-approximation conversion architecture with an internal sample-and-hold circuit.

An ADC is a mixed-signal IC that converts an analog voltage into a numeric code for processing by a microcontroller, DSP, or programmable logic. A 12-bit ADC offers 4096 discrete output codes, which is appropriate for process monitoring, sensor conditioning, instrumentation, and industrial control signals that do not require higher resolution. The ADS7820U combines sampling, quantization, an internal reference option, and digital output circuitry in one package.

Important device features include a 100 kSPS minimum conversion rate, ±1/2 LSB maximum INL and DNL, single +5 V supply operation, internal or external reference selection, and a complete sample-and-hold input stage. The 12-bit resolution and 10 µs conversion time support measurement loops in which several channels can be scanned quickly. The manufacturer also identifies the ADS7820 family as pin-compatible with the ADS7821, allowing a design to be evaluated against a related family member before layout release.

The converter uses successive approximation to determine each 12-bit result. Its analog input is sampled during acquisition, and the conversion architecture compares the sampled voltage against an internal or external reference through a successive-approximation internal DAC. Because the input stage includes its own sample-and-hold circuit, the analog signal is captured during the acquisition interval rather than requiring a separate external sample-and-hold amplifier in standard single-ended operation.

Typical uses include industrial process control, temperature and pressure transducer interfaces, battery and power-system monitoring, laboratory measurement equipment, and embedded data acquisition. The 100 kSPS rate is well matched to slow sensor signals that change gradually, while the 72 dB SINAD specification supports higher-resolution measurement than a typical low-cost 8-bit or 10-bit converter.

Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, especially for the analog input, reference, supply, and digital interface pins. Place the supply bypass capacitor close to the device and route the analog input away from noisy digital signals. Confirm the selected internal or external reference against the required accuracy before calibration, because reference error contributes directly to the total conversion error.

Alternatives de remplacement direct pour ADS7820U — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADS7820U (même facteur de forme et même empreinte) — différant par Mounting Type, Package, Sampling Rate, Supply Voltage.

Texas Instruments
Mounting Type: Through-hole SOIC
Package: 28-pin SOIC (DW)
Sampling Rate: 125 kSPS
Comparer avec ADS7820U →

ADS7821

✅ Remplacement direct
📦 28-pin SOIC
Related ADS7820-family 12-bit converter with the same 28-pin SOIC footprint and manufacturer-identified pin compatibility; channel count and functional configuration require final verification against the target application.

📋 Alternative de référence (hors catalogue)

ADS7820U Valeurs maximales et caractéristiques électriques

Converter Type Successive-approximation ADC
Résolution 12 bit
Fréquence d'échantillonnage 100 kSPS minimum
Conversion Time 10 µs
Analog Input Range 0 V to +5 V
Signal-to-Noise and Distortion 72 dB minimum with 45 kHz input
Integral Nonlinearity ±1/2 LSB maximum
Differential Nonlinearity ±1/2 LSB maximum
Tension d'alimentation +5 V single supply
Reference Internal or external
Input Stage Internal sample-and-hold circuit
Input Configuration Single-ended
Number of Analog Inputs 1
Output Resolution 4096 codes
Boîtier 28-pin SOIC
Terminal Count 28
Type de montage Surface mount
Temperature Grade Industrial
Package Shape Rectangular
Lead Form Gull wing

Guide de configuration des broches du ADS7820U rectangular

Configuration des broches du ADS7820U (boîtier rectangular). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier rectangular pour le ADS7820U

Aucune donnée de brochage détaillée disponible pour ADS7820U.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADS7820U convient pour 6 applications: Industrial Process Sensor Acquisition, Temperature and Pressure Transducer Interface, Battery and Power-System Monitoring, Laboratory and Instrumentation Signal Capture, Data Acquisition with Slow Sensor Multiplexing, Embedded Control and Monitoring Node.

🏭

Industrial Process Sensor Acquisition

The ADS7820U fits slow industrial process measurements that require 12-bit resolution without a high-speed data-conversion system. Its 100 kSPS minimum sampling rate and 10 µs conversion time allow the controller to scan several scaled sensor outputs, while the ±1/2 LSB maximum INL and DNL ratings help preserve measurement fidelity. Place a protected front-end between the field sensor and the converter, and keep the analog trace away from relay and switching-node routing.

🌡️

Temperature and Pressure Transducer Interface

The ADS7820U is appropriate for conditioning ratiometric temperature, pressure, and force sensors whose analog output changes slowly. A 12-bit converter provides 4096 codes, and the 72 dB minimum SINAD specification supports accurate digital representation of the conditioned signal. Use the internal or external reference capability to match the bridge excitation and calibration method, then calibrate offset and gain against the transducer and front-end tolerances.

⚡

Battery and Power-System Monitoring

The ADS7820U can digitize a conditioned battery voltage, cell-balancing signal, or power-rail status in a supervisory subsystem. Its single +5 V operation and 0 V to +5 V input range simplify designs that already operate from a regulated 5 V rail, while the 100 kSPS rate is more than sufficient for slowly varying power quantities. Use precision dividers or amplifiers when scaling beyond the converter range and account for their tolerance during calibration.

🖥️

Laboratory and Instrumentation Signal Capture

The ADS7820U is useful in bench instruments and compact measurement equipment that sample relatively slow analog quantities with a 12-bit result. The 72 dB minimum SINAD and ±1/2 LSB linearity limits provide a defined starting point for instrument design, while the internal sample-and-hold stage reduces the external circuit requirements. For high-gain transducer inputs, add a low-noise preamplifier and carefully isolate the reference and ground paths.

📊

Data Acquisition with Slow Sensor Multiplexing

The ADS7820U suits acquisition systems in which several slow sensor channels are multiplexed through an external analog switch. Its 10 µs conversion time allows the acquisition cycle to include settling and conversion, and the 100 kSPS minimum rate provides useful margin for channel scanning. Validate switch charge injection and crosstalk against the required accuracy, then place the multiplexer and converter close enough to minimize board-level noise pickup.

🧩

Embedded Control and Monitoring Node

The ADS7820U fits an embedded controller that periodically converts an analog sensor value and then performs thresholding, filtering, or compensation in firmware. A 12-bit result and 100 kSPS capability balance measurement detail against bus and power overhead, particularly when conversions occur at intervals much longer than 10 µs. Select the interface and sampling-control scheme from the manufacturer datasheet, and verify that the digital output timing satisfies the host processor timing requirements.

Récapitulatif des produits recommandés

ADS7821 Pin-compatible ADS7820 family converter Utilisé dans : Industrial Process Sensor Acquisition, Temperature and Pressure Transducer Interface, Battery and Power-System Monitoring, Laboratory and Instrumentation Signal Capture, Data Acquisition with Slow Sensor Multiplexing, Embedded Control and Monitoring Node ADS8504 Faster 12-bit converter alternative Utilisé dans : Industrial Process Sensor Acquisition, Battery and Power-System Monitoring, Data Acquisition with Slow Sensor Multiplexing, Embedded Control and Monitoring Node ADS8505 Higher-resolution upgrade option Utilisé dans : Temperature and Pressure Transducer Interface, Laboratory and Instrumentation Signal Capture
What are the key specifications of ADS7820U that engineers should know?
The ADS7820U is a 12-bit, single-channel, successive-approximation ADC with a 10 µs conversion time and a minimum sampling rate of 100 kSPS. According to the manufacturer datasheet, it operates from a single +5 V supply, accepts an analog input range up to +5 V, offers 72 dB minimum SINAD with a 45 kHz input, and limits both INL and DNL to ±1/2 LSB. The device includes an internal sample-and-hold circuit and can use either an internal or external reference.
What is the resolution and sampling rate of the ADS7820U?
The Texas Instruments ADS7820U provides 12-bit resolution and a sampling rate of at least 100 kSPS. Twelve-bit resolution produces 4096 output codes across the selected analog input range. Its 10 µs conversion time makes the converter suitable for multiplexed sensor acquisition and process-control loops where the measured signal changes slowly enough for a successive-approximation conversion to complete between successive readings.
What is the input voltage range of ADS7820U?
The ADS7820U accepts a single-ended analog input range of 0 V to +5 V and operates from a single +5 V supply. The manufacturer datasheet identifies an internal sample-and-hold circuit as part of the signal path. Systems using sensors that generate bipolar signals require suitable level shifting or front-end amplification before connecting them to the analog input.
Where can I download the ADS7820U datasheet PDF?
The ADS7820U manufacturer datasheet is available as a PDF through the Texas Instruments document link on this page and through the Burr-Brown datasheet listing in the manufacturer literature. The datasheet contains the electrical characteristics, timing information, pin descriptions, application information, and the complete 28-pin SOIC pin assignment. Use that pin-description table when creating the schematic symbol and laying out the PCB.
Where can I find the ADS7820U pinout?
The ADS7820U pinout is defined in the pin-description table of the manufacturer datasheet for the 28-pin SOIC package. The package has 28 pins, and the exact names and functions must be taken from the datasheet rather than inferred from another ADC. Verify the analog input, reference, supply, ground, and digital interface connections against that table before releasing PCB artwork.
What can replace the ADS7820U?
The ADS7821 is the closest related option identified for the ADS7820 family because the manufacturer describes the family as pin-compatible with ADS7821. It should still be verified against the required channel count and interface configuration before substitution. The ADS8504 and ADS8505 are described as pin-compatible alternatives with faster conversion performance, but their package and functional differences must be checked before treating either as a drop-in replacement.
Is ADS7820U the same as ADS8504?
The ADS7820U and ADS8504 are not the same device. Texas Instruments support material describes the ADS8504 as a pin-compatible ADS7820 alternative that is faster, lower in power, and potentially less costly, but a substitution also requires confirmation of package, pin assignment, reference voltage, interface, and acquisition timing. The ADS7820U is a 12-bit, 100 kSPS converter in a 28-pin SOIC, while the ADS8504 is specified as a 12-bit, 250 kSPS device.
What is the best Texas Instruments equivalent for ADS7820U?
The best same-family alternative is the ADS7821 because the ADS7820 datasheet identifies the family as pin-compatible with ADS7821. The ADS8504 is a higher-speed 12-bit option and the ADS8505 is a 16-bit option, both cited as pin-compatible alternatives in Texas Instruments support material. Choose based on required resolution, sampling rate, power, and verified board compatibility rather than on the MPN alone.
ADS7820U vs ADS8504 - which is better for fast data acquisition?
The ADS8504 is better when conversion speed is the priority because Texas Instruments support material identifies it as a 250 kSPS alternative to the 100 kSPS ADS7820U. The ADS7820U remains appropriate when 100 kSPS is sufficient and its ±1/2 LSB INL and DNL ratings meet the measurement requirement. A board redesign is still expected if the ADS8504 uses a different package or a changed interface arrangement.
When should I choose ADS7820U over ADS8504?
Choose the ADS7820U when 100 kSPS is sufficient, a 28-pin SOIC layout is already established, and the application values the documented ±1/2 LSB INL and DNL limits. The ADS8504 is preferable for significantly faster sampling, potentially lower power, or a lower-cost redesign. Because the two devices differ in speed and possibly package implementation, verify the complete footprint and acquisition timing before changing the schematic.
Is ADS7820U suitable for industrial sensor measurement?
The ADS7820U is suitable for many industrial sensor-measurement applications because it is a 12-bit, 100 kSPS converter with an industrial temperature grade and a single +5 V supply requirement. The 72 dB minimum SINAD and ±1/2 LSB linearity ratings support precise slow-signal measurements. Select an appropriate front-end for transducer excitation, grounding, and noise rejection, and isolate analog routing from switching nodes.
How should reference voltage be selected for ADS7820U?
The ADS7820U can operate with an internal or external reference, so the choice depends on accuracy, drift, and calibration requirements. An external precision reference may improve end-to-end accuracy when the application requires tight calibration, while the internal reference can simplify the design. Confirm the reference range and configuration in the manufacturer datasheet because reference error and noise contribute directly to ADC accuracy.
How should ADS7820U be placed on the PCB?
Place the ADS7820U near the source of the analog signal and route the analog input as a short trace away from digital switching outputs. Connect the supply bypass capacitor close to the device supply pins and keep the ground return path short. For a sensor front end, place the amplifier or filter before the converter so the filter can attenuate out-of-band noise before the ADC performs each conversion.
What is the power-supply requirement for ADS7820U?
The ADS7820U requires a single +5 V supply for normal operation. Place a low-ESR bypass capacitor immediately across the supply pins and connect it to a low-impedance ground plane to suppress converter and reference noise. Decoupling layout should follow the manufacturer application guidance, and the supply must remain within the absolute maximum ratings stated in the datasheet during power-up, shutdown, and fault conditions.
Where can I buy ADS7820U online?
Use the Request a Quote form on this page to request ADS7820U pricing, current availability, and a formal quotation from XAIPART. The form is the appropriate channel because quote-based purchasing can accommodate production volumes, scheduled deliveries, and sourcing needs that are not represented by a static price listing.
What is the price of ADS7820U?
ADS7820U pricing depends on order quantity, current supplier inventory, and required delivery schedule. Submit a request through the Request a Quote form on this page to receive a current quotation for the quantity and packaging you need. The form allows procurement teams to obtain pricing without relying on a potentially stale published price tier.
What is the lead time and stock status of ADS7820U?
The current lead time, minimum order quantity, and stock status for ADS7820U should be confirmed through the Request a Quote form on this page. Provide the required quantity, target delivery date, and preferred package configuration so the sourcing team can return a current supply commitment instead of an estimated schedule.
Is ADS7820U RoHS and REACH compliant?
The RoHS and REACH status must be confirmed from the current manufacturer product documentation before a regulated shipment is released. The component is a 28-pin SOIC analog-to-digital converter from the Texas Instruments ADS7820 family, but compliance status should be verified for the exact ordering code. Request the material-declaration documentation through the Request a Quote form on this page.
How does ADS7820U compare with ADS8505 for a 16-bit redesign?
The ADS8505 is the relevant option when 16-bit resolution is required because Texas Instruments support material identifies it as a 16-bit, 250 kSPS pin-compatible alternative to the ADS7820. The ADS7820U provides 12-bit resolution and a 100 kSPS minimum sampling rate. A move to ADS8505 is a functional upgrade rather than a like-for-like substitution, so verify reference accuracy, noise, interface timing, and package before committing the design.

Données de référence d'ingénierie pour ADS7820U — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the ADS7820U when the design needs a single-channel, 12-bit converter with a 100 kSPS minimum sampling rate, a single +5 V supply, and specified ±1/2 LSB INL and DNL performance. It is a strong fit for slow industrial sensors, power monitoring, laboratory instrumentation, and multiplexed acquisition systems where maximum throughput is not required. Evaluate ADS7821 when its channel configuration meets the application and a same-family board option is preferred. Consider ADS8504 when substantially faster sampling, potentially lower power, or cost reduction justifies a layout and timing review. Use ADS8505 when 16-bit resolution is required, but treat it as a functional upgrade that requires reference, noise, timing, and package verification. For every alternative, confirm the actual footprint, pin assignments, reference arrangement, digital timing, and acquisition requirements before release.

Comparaison avec les alternatives

Paramètre Ce produit ADS7821
Brand Texas Instruments Texas Instruments
Package 28-pin SOIC 28-pin SOIC

Principaux différenciateurs

  • Documented 12-bit linearity (vs ADS8504)
  • Single +5 V operation with selectable reference (vs ADS8504)
  • Lower sampling rate than the ADS8504 alternative (vs ADS8504)
  • Direct same-family pin-compatibility route (vs ADS7821)

Notes de conception

Place the ADS7820U close to the analog source and keep the analog input trace short and guarded where practical. Route the input away from digital clock, PWM, relay-coil, and switching-converter nodes. A compact ground plane beneath the analog section provides a low-impedance return, but analog and digital return currents should still be arranged to avoid sharing a noisy path through the converter ground pins.

Place the supply bypass capacitor immediately across the ADS7820U supply and ground pins, with the shortest and lowest-inductance connection possible. Follow the capacitor value and layout recommended in the manufacturer datasheet. A remote capacitor or long supply trace can allow supply noise and conversion transients to appear at the analog input, degrading the specified SINAD even when the component itself operates correctly.

Verify the source impedance and the acquisition time required by the sample-and-hold input. Sensors with high source impedance may require a buffer, and multiplexed analog switches must be allowed to settle between selecting a channel and starting conversion. Overshoot and ringing at the analog input should be compared with the absolute input-voltage limits because high-speed transients can impair accuracy even when the average signal remains in range.

Do not assign pin names or polarities from a generic ADC symbol, and do not treat the ADS8504 or ADS8505 as automatic drop-in replacements despite their described pin compatibility. Check package dimensions, pad layout, reference configuration, digital interface, and timing against the actual datasheets. Similarly, verify whether the ADS7821 configuration satisfies the required channel count before committing the PCB.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance declarations for the exact ADS7820U ordering code were not identified in the available product information. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation before shipping a regulated product.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ADS7820U datasheet ADS7820U pinout ADS7820U datasheet pdf ADS7820U specifications ADS7820U equivalent ADS7820U replacement ADS7820U cross reference ADS7820U vs ADS8504 ADS7820U 28-SOIC pinout ADS7820U application circuit Texas Instruments ADS7820U ADS7820U price ADS7820U stock what is the ADS7820U resolution

Composants & termes associés

Texas Instruments ADS7820U ADS7821 ADS8504 ADS8505 analog-to-digital converter ADC successive-approximation ADC mixed-signal IC sample-and-hold circuit internal reference external reference signal-to-noise and distortion ratio SINAD integral nonlinearity INL differential nonlinearity DNL 28-pin SOIC surface-mount package industrial sensor measurement power-system monitoring embedded data acquisition single +5 V supply
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ