ADS7820U - 12-Bit 100 kSPS ADC | Texas Instruments
料号: ADS7820U ✓ 量产中ADS7820U 概述
An ADC is a mixed-signal IC that converts an analog voltage into a numeric code for processing by a microcontroller, DSP, or programmable logic. A 12-bit ADC offers 4096 discrete output codes, which is appropriate for process monitoring, sensor conditioning, instrumentation, and industrial control signals that do not require higher resolution. The ADS7820U combines sampling, quantization, an internal reference option, and digital output circuitry in one package.
Important device features include a 100 kSPS minimum conversion rate, ±1/2 LSB maximum INL and DNL, single +5 V supply operation, internal or external reference selection, and a complete sample-and-hold input stage. The 12-bit resolution and 10 µs conversion time support measurement loops in which several channels can be scanned quickly. The manufacturer also identifies the ADS7820 family as pin-compatible with the ADS7821, allowing a design to be evaluated against a related family member before layout release.
The converter uses successive approximation to determine each 12-bit result. Its analog input is sampled during acquisition, and the conversion architecture compares the sampled voltage against an internal or external reference through a successive-approximation internal DAC. Because the input stage includes its own sample-and-hold circuit, the analog signal is captured during the acquisition interval rather than requiring a separate external sample-and-hold amplifier in standard single-ended operation.
Typical uses include industrial process control, temperature and pressure transducer interfaces, battery and power-system monitoring, laboratory measurement equipment, and embedded data acquisition. The 100 kSPS rate is well matched to slow sensor signals that change gradually, while the 72 dB SINAD specification supports higher-resolution measurement than a typical low-cost 8-bit or 10-bit converter.
Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, especially for the analog input, reference, supply, and digital interface pins. Place the supply bypass capacitor close to the device and route the analog input away from noisy digital signals. Confirm the selected internal or external reference against the required accuracy before calibration, because reference error contributes directly to the total conversion error.
直接替换替代料: ADS7820U ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADS7820U (相同外形与封装尺寸) ——差异在于 Mounting Type, Package, Sampling Rate, Supply Voltage.
ADS7821
✅ 直接替换📋 参考替代料(不在目录中)
ADS7820U 最大额定值与电气特性
| Converter Type | Successive-approximation ADC |
| 分辨率 | 12 bit |
| 采样率 | 100 kSPS minimum |
| Conversion Time | 10 µs |
| Analog Input Range | 0 V to +5 V |
| Signal-to-Noise and Distortion | 72 dB minimum with 45 kHz input |
| Integral Nonlinearity | ±1/2 LSB maximum |
| Differential Nonlinearity | ±1/2 LSB maximum |
| 电源电压 | +5 V single supply |
| Reference | Internal or external |
| Input Stage | Internal sample-and-hold circuit |
| Input Configuration | Single-ended |
| Number of Analog Inputs | 1 |
| Output Resolution | 4096 codes |
| 封装 | 28-pin SOIC |
| Terminal Count | 28 |
| 安装类型 | Surface mount |
| Temperature Grade | Industrial |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
ADS7820U rectangular 引脚配置指南
ADS7820U(rectangular 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: ADS7820U.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADS7820U 适用于 6 应用s: Industrial Process Sensor Acquisition, Temperature and Pressure Transducer Interface, Battery and Power-System Monitoring, Laboratory and Instrumentation Signal Capture, Data Acquisition with Slow Sensor Multiplexing, Embedded Control and Monitoring Node.
Industrial Process Sensor Acquisition
The ADS7820U fits slow industrial process measurements that require 12-bit resolution without a high-speed data-conversion system. Its 100 kSPS minimum sampling rate and 10 µs conversion time allow the controller to scan several scaled sensor outputs, while the ±1/2 LSB maximum INL and DNL ratings help preserve measurement fidelity. Place a protected front-end between the field sensor and the converter, and keep the analog trace away from relay and switching-node routing.
推荐
Temperature and Pressure Transducer Interface
The ADS7820U is appropriate for conditioning ratiometric temperature, pressure, and force sensors whose analog output changes slowly. A 12-bit converter provides 4096 codes, and the 72 dB minimum SINAD specification supports accurate digital representation of the conditioned signal. Use the internal or external reference capability to match the bridge excitation and calibration method, then calibrate offset and gain against the transducer and front-end tolerances.
推荐
Battery and Power-System Monitoring
The ADS7820U can digitize a conditioned battery voltage, cell-balancing signal, or power-rail status in a supervisory subsystem. Its single +5 V operation and 0 V to +5 V input range simplify designs that already operate from a regulated 5 V rail, while the 100 kSPS rate is more than sufficient for slowly varying power quantities. Use precision dividers or amplifiers when scaling beyond the converter range and account for their tolerance during calibration.
推荐
Laboratory and Instrumentation Signal Capture
The ADS7820U is useful in bench instruments and compact measurement equipment that sample relatively slow analog quantities with a 12-bit result. The 72 dB minimum SINAD and ±1/2 LSB linearity limits provide a defined starting point for instrument design, while the internal sample-and-hold stage reduces the external circuit requirements. For high-gain transducer inputs, add a low-noise preamplifier and carefully isolate the reference and ground paths.
推荐
Data Acquisition with Slow Sensor Multiplexing
The ADS7820U suits acquisition systems in which several slow sensor channels are multiplexed through an external analog switch. Its 10 µs conversion time allows the acquisition cycle to include settling and conversion, and the 100 kSPS minimum rate provides useful margin for channel scanning. Validate switch charge injection and crosstalk against the required accuracy, then place the multiplexer and converter close enough to minimize board-level noise pickup.
推荐
Embedded Control and Monitoring Node
The ADS7820U fits an embedded controller that periodically converts an analog sensor value and then performs thresholding, filtering, or compensation in firmware. A 12-bit result and 100 kSPS capability balance measurement detail against bus and power overhead, particularly when conversions occur at intervals much longer than 10 µs. Select the interface and sampling-control scheme from the manufacturer datasheet, and verify that the digital output timing satisfies the host processor timing requirements.
推荐
推荐产品汇总
工程参考数据: ADS7820U ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADS7821 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 28-pin SOIC | 28-pin SOIC |
关键差异点
- Documented 12-bit linearity (对比 ADS8504)
- Single +5 V operation with selectable reference (对比 ADS8504)
- Lower sampling rate than the ADS8504 alternative (对比 ADS8504)
- Direct same-family pin-compatibility route (对比 ADS7821)
设计说明
Place the ADS7820U close to the analog source and keep the analog input trace short and guarded where practical. Route the input away from digital clock, PWM, relay-coil, and switching-converter nodes. A compact ground plane beneath the analog section provides a low-impedance return, but analog and digital return currents should still be arranged to avoid sharing a noisy path through the converter ground pins.
Place the supply bypass capacitor immediately across the ADS7820U supply and ground pins, with the shortest and lowest-inductance connection possible. Follow the capacitor value and layout recommended in the manufacturer datasheet. A remote capacitor or long supply trace can allow supply noise and conversion transients to appear at the analog input, degrading the specified SINAD even when the component itself operates correctly.
Verify the source impedance and the acquisition time required by the sample-and-hold input. Sensors with high source impedance may require a buffer, and multiplexed analog switches must be allowed to settle between selecting a channel and starting conversion. Overshoot and ringing at the analog input should be compared with the absolute input-voltage limits because high-speed transients can impair accuracy even when the average signal remains in range.
Do not assign pin names or polarities from a generic ADC symbol, and do not treat the ADS8504 or ADS8505 as automatic drop-in replacements despite their described pin compatibility. Check package dimensions, pad layout, reference configuration, digital interface, and timing against the actual datasheets. Similarly, verify whether the ADS7821 configuration satisfies the required channel count before committing the PCB.
合规信息
Compliance declarations for the exact ADS7820U ordering code were not identified in the available product information. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation before shipping a regulated product.