ADS8364Y/2K - 6-Channel 16-Bit 250kSPS SAR ADC | Texas Instruments
Référence : ADS8364Y/2K ✓ ActifADS8364Y/2K Présentation
An ADC is an analog-to-digital converter, a mixed-signal semiconductor that converts continuously varying voltage signals into numerical values for processing. The ADS8364 belongs to the data-converter hierarchy, where a SAR ADC repeatedly compares the sampled input against a reference-derived DAC value. Its simultaneous-sampling architecture gives all six channels a common acquisition sequence, preserving the timing relationship among phase-current, voltage, and feedback measurements.
The principal features are 16-bit conversion resolution, six fully differential input channels, 250 kSPS operation, and parallel output. Differential inputs reduce sensitivity to common-mode noise when each signal is driven as a differential pair. The 250 kSPS conversion rate provides 4 μs per conversion interval, which is suitable for high-speed current and voltage feedback loops when paired with correctly selected external signal conditioning.
Each channel includes a sample-and-hold input stage, and the six channels are organized into two pairs for simultaneous acquisition. The parallel interface transfers each 16-bit result efficiently to a digital controller, processor, or field-programmable logic array. A 5 V supply is identified in the product listings, while exact analog and digital supply limits, reference requirements, input range, and timing parameters must be confirmed in the manufacturer datasheet before final circuit design.
Typical uses include three-phase motor drives, inverters, power-factor correction equipment, current monitoring, laboratory instrumentation, and industrial control systems. In a motor controller, the converter can acquire several bridge-shunt and phase-voltage signals concurrently, allowing the controller to calculate current magnitude, vector position, and power with improved temporal consistency.
The principal design consideration is maintaining clean, simultaneous analog sampling. Each input should use appropriate differential drive and filtering, the converter and reference network should follow the datasheet layout, and digital output routing should avoid coupling switching-node energy into sensitive analog traces. Input voltage, reference voltage, output logic levels, and decoupling must remain within the specified operating limits.
This page organizes the principal specifications, package details, application guidance, verified replacement information, and design considerations into one engineering reference. It also distinguishes confirmed device characteristics from parameters that still require direct confirmation from the Texas Instruments datasheet before schematic release or PCB implementation.
Alternatives de remplacement direct pour ADS8364Y/2K — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ADS8364Y/250
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADS8364Y/250G4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADS8364Y/2K Valeurs maximales et caractéristiques électriques
| Converter Type | Successive-approximation ADC (SAR) |
| Résolution | 16 bit |
| Number of Channels | 6 channels |
| Fréquence d'échantillonnage | 250 kSPS per channel |
| Sampling Architecture | 6-channel simultaneous sampling |
| Input Type | Fully differential |
| Input Channel Grouping | Two groups of three channels |
| Output Interface | Parallel output |
| Tension d'alimentation | 5 V |
| Boîtier | 64-pin TQFP (PAG), 10 mm × 10 mm |
| Type de montage | Surface mount |
| Température de fonctionnement | -40 °C to +85 °C |
| Conversion Interval | 4 µs at 250 kSPS |
| Sample-and-Hold Inputs | 6 differential channels |
| Primary Application | Motor and power control |
| Statut RoHS | Compliant |
Guide de configuration des broches du ADS8364Y/2K 64-pin tqfp (pag), 10 mm × 10 mm
Configuration des broches du ADS8364Y/2K (boîtier 64-pin tqfp (pag), 10 mm × 10 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour ADS8364Y/2K.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ADS8364Y/2K convient pour 6 applications: Three-Phase Motor Control, Inverter Feedback Monitoring, Power-Factor Correction Control, Industrial Current Monitoring, Precision Test and Measurement, Robotics and Position Control.
Three-Phase Motor Control
The ADS8364Y/2K suits three-phase motor controllers because it acquires six fully differential channels simultaneously at 16-bit resolution and 250 kSPS. Three bridge-shunt current signals and up to three inverter or DC-link voltage signals can share one sampling sequence, helping the control loop calculate phase current and applied vector from measurements captured at the same instant. At 250 kSPS, each conversion interval is 4 µs. The converter should sit behind appropriately scaled, isolated, or attenuated front ends, with the parallel output connected to the motor controller or FPGA through careful timing and signal-integrity design.
Recommandé
Inverter Feedback Monitoring
The six-channel simultaneous architecture of the ADS8364Y/2K is useful for inverter feedback and protection systems that compare phase-current and voltage information on a common time base. Each 16-bit channel can operate at 250 kSPS, reducing uncertainty caused by sampling three or more electrical variables at different instants. Differential inputs help reject common-mode voltage present in high-power converter environments. Practical implementation requires scaling each bridge output to the converter’s permitted input range, isolating high-voltage nodes, and keeping sensitive filtering away from switching nodes. The manufacturer datasheet should define input limits, source-impedance requirements, and acquisition timing before component selection is finalized.
Recommandé
Power-Factor Correction Control
The ADS8364Y/2K can support PFC control by sampling current and voltage information at 250 kSPS while maintaining alignment across six analog channels. Simultaneous acquisition helps the controller observe input current, switch-node quantities, and bus feedback without channel-to-channel timing offsets. Its 16-bit resolution provides fine numerical granularity for current and voltage-loop calculations, while the parallel interface supports direct connection to digital control logic. The implementation must account for the 5 V supply, input range, reference accuracy, and digital output timing. Anti-alias filters should be selected for the intended switching frequency, and input scaling must protect every analog channel from transients.
Recommandé
Industrial Current Monitoring
The ADS8364Y/2K is appropriate for industrial current-monitoring systems that need several synchronized analog measurements rather than a single slowly sampled value. Six fully differential inputs at 16-bit resolution and 250 kSPS can support multiple current sensors, load channels, or feedback points, depending on the front-end design. Differential receivers can reject much of the common-mode voltage found in factory power systems, improving measurement robustness when paired with proper filtering and grounding. Parallel output allows the results to be captured by a processor or programmable logic. Safety-related deployments may require reinforced isolation, galvanic barriers, and applicable industrial certifications outside the ADC itself.
Recommandé
Precision Test and Measurement
The ADS8364Y/2K can serve as the acquisition element in a multi-channel precision measurement instrument where each channel must observe its input under a common sampling sequence. Its 16-bit resolution, six differential channels, and 250 kSPS rate support synchronized current, voltage, and sensor measurements in laboratory equipment. The parallel interface can feed an FPGA or digital controller for calibration, filtering, and result storage. To preserve 16-bit performance, the design must control analog input noise, reference stability, grounding, and PCB leakage. Exact input-range, missing-code, noise, and calibration specifications should be taken from the manufacturer datasheet rather than inferred from the nominal resolution.
Recommandé
Robotics and Position Control
The ADS8364Y/2K can support robotics and position-control systems that evaluate multiple current or sensor channels with consistent timing. Simultaneous 250 kSPS sampling is useful when motor-current vectors and position-related feedback must be interpreted within the same control interval. Its six fully differential inputs reduce signal corruption from common-mode noise when properly conditioned, and the 64-pin parallel interface provides direct access to digital control hardware. The ADC is not itself a safety-qualified motor controller, so developers must add the required motor-drive power stage, isolation, fault detection, and watchdog functions. Input scaling and filter selection should be derived from each sensor’s range and bandwidth.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADS8364Y/2K — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADS8364Y/250 | ADS8364Y/250G4 |
|---|---|---|---|
| Package | TQFP-64 (PAG), 10 mm × 10 mm | TQFP-64 (PAG), 10 mm × 10 mm | TQFP-64 (PAG), 10 mm × 10 mm |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit | 16 bit |
| Number of Input Channels | 6 channels | 6 channels | 6 channels |
| Sampling Rate | 250 kSPS per channel | 250 kSPS per channel | 250 kSPS per channel |
| Sampling Architecture | Simultaneous sampling | Simultaneous sampling | Simultaneous sampling |
| Input Type | Fully differential | Fully differential | Fully differential |
| Output Interface | Parallel output | Parallel output | Parallel output |
Principaux différenciateurs
- Six-channel simultaneous acquisition preserves measurement alignment (vs ADS8364Y/250)
- Full 16-bit conversion resolution supports precise control-loop measurements (vs ADS8364Y/250G4)
- Fully differential inputs support robust acquisition in noisy power systems (vs ADS8364Y/250)
Notes de conception
Preserve channel-to-channel timing by routing the six analog inputs with matched geometry and keeping each channel’s input network close to its assigned pin. Place the input filters and any differential driver as close to the converter as practical, and avoid routing analog traces beneath or beside the 16-bit parallel output bus. This is especially important in motor-control systems where switch-node transitions can couple into a 16-bit acquisition front end.
Design the analog front end around the ADS8364Y/2K’s specified input range, common-mode limits, source impedance, and acquisition time; these values must be confirmed from the manufacturer datasheet. Place antialias filtering ahead of the converter and verify its phase and transient response at the 250 kSPS operating rate. If a single-ended sensor is used, use an active differential stage rather than grounding one input and assuming the converter can accept the resulting signal directly.
Use a multilayer PCB with a continuous ground reference beneath the TQFP and separate analog and digital return paths as far as practical. Follow the manufacturer’s recommended decoupling and layout pattern, place bulk and high-frequency capacitors at the appropriate supply pins, and provide adequate exposed copper around the 64-pin device for heat spreading. Check the TQFP-64 land pattern and paste mask against the PAG mechanical drawing before fabrication.
Informations de conformité
The LCSC product listing identifies the device as RoHS compliant. No manufacturer-specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the referenced product information.