Texas Instruments

ADS8364Y/2K - 6-Channel 16-Bit 250kSPS SAR ADC | Texas Instruments

MPN: ADS8364Y/2K ✓ সক্রিয়
5 V Vdss 64-pin TQFP (PAG), 10 mm × 10 mm Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

ADS8364Y/2K সারাংশ

The Texas Instruments ADS8364Y/2K is a six-channel, 16-bit, simultaneous-sampling successive-approximation ADC rated at 250 kSPS per channel and packaged in a 64-pin TQFP (PAG) measuring 10 mm by 10 mm. It accepts six fully differential analog inputs and provides parallel digital output, making it suitable for synchronized measurement in motor-control and power-conversion systems.

An ADC is an analog-to-digital converter, a mixed-signal semiconductor that converts continuously varying voltage signals into numerical values for processing. The ADS8364 belongs to the data-converter hierarchy, where a SAR ADC repeatedly compares the sampled input against a reference-derived DAC value. Its simultaneous-sampling architecture gives all six channels a common acquisition sequence, preserving the timing relationship among phase-current, voltage, and feedback measurements.

The principal features are 16-bit conversion resolution, six fully differential input channels, 250 kSPS operation, and parallel output. Differential inputs reduce sensitivity to common-mode noise when each signal is driven as a differential pair. The 250 kSPS conversion rate provides 4 μs per conversion interval, which is suitable for high-speed current and voltage feedback loops when paired with correctly selected external signal conditioning.

Each channel includes a sample-and-hold input stage, and the six channels are organized into two pairs for simultaneous acquisition. The parallel interface transfers each 16-bit result efficiently to a digital controller, processor, or field-programmable logic array. A 5 V supply is identified in the product listings, while exact analog and digital supply limits, reference requirements, input range, and timing parameters must be confirmed in the manufacturer datasheet before final circuit design.

Typical uses include three-phase motor drives, inverters, power-factor correction equipment, current monitoring, laboratory instrumentation, and industrial control systems. In a motor controller, the converter can acquire several bridge-shunt and phase-voltage signals concurrently, allowing the controller to calculate current magnitude, vector position, and power with improved temporal consistency.

The principal design consideration is maintaining clean, simultaneous analog sampling. Each input should use appropriate differential drive and filtering, the converter and reference network should follow the datasheet layout, and digital output routing should avoid coupling switching-node energy into sensitive analog traces. Input voltage, reference voltage, output logic levels, and decoupling must remain within the specified operating limits.

This page organizes the principal specifications, package details, application guidance, verified replacement information, and design considerations into one engineering reference. It also distinguishes confirmed device characteristics from parameters that still require direct confirmation from the Texas Instruments datasheet before schematic release or PCB implementation.

এর জন্য ড্রপ-ইন বিকল্প ADS8364Y/2K — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

ADS8364Y/250

✅ ড্রপ-ইন
📦 TQFP-64 (PAG), 10 mm × 10 mm
Same 6-channel, 16-bit and 250 kSPS core specifications (0% difference in resolution, channel count and rate); ordering and packing suffix requires confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADS8364Y/250G4

✅ ড্রপ-ইন
📦 TQFP-64 (PAG), 10 mm × 10 mm
Same 6-channel, 16-bit and 250 kSPS core specifications (0% difference in resolution, channel count and rate); G4 ordering and qualification details require confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADS8364Y/2K সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Converter Type Successive-approximation ADC (SAR)
রেজোলিউশন 16 bit
Number of Channels 6 channels
স্যাম্পলিং রেট 250 kSPS per channel
Sampling Architecture 6-channel simultaneous sampling
Input Type Fully differential
Input Channel Grouping Two groups of three channels
Output Interface Parallel output
সাপ্লাই ভোল্টেজ 5 V
প্যাকেজ 64-pin TQFP (PAG), 10 mm × 10 mm
মাউন্টিং টাইপ Surface mount
অপারেটিং তাপমাত্রা -40 °C to +85 °C
Conversion Interval 4 µs at 250 kSPS
Sample-and-Hold Inputs 6 differential channels
Primary Application Motor and power control
RoHS স্ট্যাটাস Compliant

ADS8364Y/2K 64-pin tqfp (pag), 10 mm × 10 mm পিন কনফিগারেশন গাইড

ADS8364Y/2K (64-pin tqfp (pag), 10 mm × 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

ADS8364Y/2K-এর জন্য 64-pin tqfp (pag), 10 mm × 10 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADS8364Y/2K.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

ADS8364Y/2K এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Three-Phase Motor Control, Inverter Feedback Monitoring, Power-Factor Correction Control, Industrial Current Monitoring, Precision Test and Measurement, Robotics and Position Control.

🏭

Three-Phase Motor Control

The ADS8364Y/2K suits three-phase motor controllers because it acquires six fully differential channels simultaneously at 16-bit resolution and 250 kSPS. Three bridge-shunt current signals and up to three inverter or DC-link voltage signals can share one sampling sequence, helping the control loop calculate phase current and applied vector from measurements captured at the same instant. At 250 kSPS, each conversion interval is 4 µs. The converter should sit behind appropriately scaled, isolated, or attenuated front ends, with the parallel output connected to the motor controller or FPGA through careful timing and signal-integrity design.

⚡

Inverter Feedback Monitoring

The six-channel simultaneous architecture of the ADS8364Y/2K is useful for inverter feedback and protection systems that compare phase-current and voltage information on a common time base. Each 16-bit channel can operate at 250 kSPS, reducing uncertainty caused by sampling three or more electrical variables at different instants. Differential inputs help reject common-mode voltage present in high-power converter environments. Practical implementation requires scaling each bridge output to the converter’s permitted input range, isolating high-voltage nodes, and keeping sensitive filtering away from switching nodes. The manufacturer datasheet should define input limits, source-impedance requirements, and acquisition timing before component selection is finalized.

⚡

Power-Factor Correction Control

The ADS8364Y/2K can support PFC control by sampling current and voltage information at 250 kSPS while maintaining alignment across six analog channels. Simultaneous acquisition helps the controller observe input current, switch-node quantities, and bus feedback without channel-to-channel timing offsets. Its 16-bit resolution provides fine numerical granularity for current and voltage-loop calculations, while the parallel interface supports direct connection to digital control logic. The implementation must account for the 5 V supply, input range, reference accuracy, and digital output timing. Anti-alias filters should be selected for the intended switching frequency, and input scaling must protect every analog channel from transients.

🏭

Industrial Current Monitoring

The ADS8364Y/2K is appropriate for industrial current-monitoring systems that need several synchronized analog measurements rather than a single slowly sampled value. Six fully differential inputs at 16-bit resolution and 250 kSPS can support multiple current sensors, load channels, or feedback points, depending on the front-end design. Differential receivers can reject much of the common-mode voltage found in factory power systems, improving measurement robustness when paired with proper filtering and grounding. Parallel output allows the results to be captured by a processor or programmable logic. Safety-related deployments may require reinforced isolation, galvanic barriers, and applicable industrial certifications outside the ADC itself.

🔧

Precision Test and Measurement

The ADS8364Y/2K can serve as the acquisition element in a multi-channel precision measurement instrument where each channel must observe its input under a common sampling sequence. Its 16-bit resolution, six differential channels, and 250 kSPS rate support synchronized current, voltage, and sensor measurements in laboratory equipment. The parallel interface can feed an FPGA or digital controller for calibration, filtering, and result storage. To preserve 16-bit performance, the design must control analog input noise, reference stability, grounding, and PCB leakage. Exact input-range, missing-code, noise, and calibration specifications should be taken from the manufacturer datasheet rather than inferred from the nominal resolution.

🤖

Robotics and Position Control

The ADS8364Y/2K can support robotics and position-control systems that evaluate multiple current or sensor channels with consistent timing. Simultaneous 250 kSPS sampling is useful when motor-current vectors and position-related feedback must be interpreted within the same control interval. Its six fully differential inputs reduce signal corruption from common-mode noise when properly conditioned, and the 64-pin parallel interface provides direct access to digital control hardware. The ADC is not itself a safety-qualified motor controller, so developers must add the required motor-drive power stage, isolation, fault detection, and watchdog functions. Input scaling and filter selection should be derived from each sensor’s range and bandwidth.

What are the key specifications of ADS8364Y/2K that engineers should know?
The ADS8364Y/2K is a six-channel, 16-bit SAR ADC with simultaneous sampling, 250 kSPS conversion rate, fully differential inputs, and parallel digital output. Texas Instruments identifies a 64-pin TQFP (PAG) package, an operating range of -40 °C to +85 °C, and a 5 V supply. According to the Texas Instruments ADS8364 product page and part-details listing, these parameters make the device appropriate for synchronized motor and power-control measurements where accurate channel timing is important.
Where can I download the ADS8364Y/2K datasheet PDF?
The official ADS8364Y/2K datasheet is available through the Texas Instruments product page for the ADS8364 family. The manufacturer part-details link identifies the exact orderable ADS8364Y/2K configuration, while the family product page provides technical documentation and support resources. Use those official links for the current datasheet revision and avoid relying on an unofficial mirror when the pinout, timing diagrams, and recommended application circuit are being used for a new design.
Where can I find the ADS8364Y/2K pinout?
The ADS8364Y/2K pinout is shown in the pin-configuration section of the Texas Instruments ADS8364 manufacturer datasheet. The device uses a 64-pin TQFP (PAG) package with 64 numbered pins, so every package terminal must be reviewed before assigning power, ground, analog inputs, digital outputs, and control signals. The pin-description table should be used directly when creating the schematic symbol and checking no-connect or unused-pin treatment.
Is ADS8364Y/2K suitable for simultaneous motor-control measurements?
Yes, the ADS8364Y/2K is specifically positioned for motor and power-control acquisition because it provides six simultaneously sampled, fully differential channels at 16-bit resolution and 250 kSPS. A motor controller can use these channels for phase currents, DC-link voltage, or inverter feedback while maintaining a common sampling sequence. The 4 µs conversion interval supports high-bandwidth feedback, although signal conditioning, source impedance, reference accuracy, and anti-alias filtering must be designed around the datasheet requirements.
What can replace the ADS8364Y/2K on the same PCB?
The closest documented drop-in candidate is the Texas Instruments ADS8364Y/250 in the same 64-pin TQFP (PAG) footprint. The comparison identifies both devices as six-channel, 16-bit simultaneous-sampling ADCs, and the DigiKey listing also specifies a 64-TQFP package. No cross-manufacturer pin-compatible replacement was confirmed, so changing suppliers would require a separate footprint, interface, timing, and functional verification rather than an unqualified substitution.
Is ADS8364Y/2K the same as ADS8364Y/250?
The two Texas Instruments orderable MPNs are closely related, but they should not be treated as identical without checking the ordering table and reel configuration in the manufacturer documentation. Both are identified as six-channel, 16-bit, simultaneous-sampling SAR ADCs in a 64-pin TQFP package, and the cross-reference data compares them directly. Confirm the exact suffix, packing form, temperature grade, and marking requirements before selecting either ordering code.
What is the difference between ADS8364Y/2K and ADS8364Y/250?
The confirmed technical difference is not the core conversion function: both are six-channel, 16-bit, 250 kSPS simultaneous-sampling SAR ADCs in a 64-pin TQFP (PAG) package. Their orderable suffix and packing details must be checked against the Texas Instruments ordering information. The verified comparison identifies ADS8364Y/250 as a close candidate, but it does not establish that every production, labeling, or reel-handling requirement is interchangeable.
When should I choose ADS8364Y/2K over ADS8364Y/250?
Choose ADS8364Y/2K when it matches the exact ordering code, packing form, and production requirements established for the design. Choose ADS8364Y/250 only after confirming that its ordering suffix preserves the required 64-pin TQFP footprint, 16-bit resolution, six-channel simultaneous sampling, 250 kSPS rate, electrical limits, and qualification criteria. For either selection, review the current manufacturer ordering table because the commercial suffix can encode logistics or grade information beyond the headline ADC specifications.
Where can I buy ADS8364Y/2K and check current availability?
Use the Request a Quote form on this page to request current ADS8364Y/2K availability, minimum order quantity, lead time, and supply details. The form provides a direct channel for an exact-MPN quotation without relying on potentially stale listing text. For technical validation, use the linked Texas Instruments part-details page to confirm the device status and orderable package configuration.
What is the price of ADS8364Y/2K?
The current unit price for ADS8364Y/2K is handled through the Request a Quote form on this page. Submit the exact MPN ADS8364Y/2K and required quantity to obtain current commercial terms. The structured listing on this page is designed to refresh pricing as market conditions change, so engineers should use the quote response rather than an archived catalog amount when preparing a bill of materials.
What is the lead time and stock status for ADS8364Y/2K?
Current stock, lead time, and minimum order quantity for ADS8364Y/2K should be confirmed through the Request a Quote form on this page. The Texas Instruments product page provides the manufacturer’s device and ordering information, while quotation availability can vary with volume and procurement conditions. Request the exact MPN, quantity, delivery destination, and required date so the supply response can be evaluated against the project schedule.
How much power and thermal management does the ADS8364Y/2K need?
The ADS8364Y/2K uses a 5 V supply, but its exact power dissipation cannot be established from the basic product listing alone. Engineers should calculate dissipation from the selected operating mode, analog and digital supply currents, output activity, and the ambient temperature. Then apply the manufacturer’s thermal information for the 64-pin TQFP (PAG) package and verify that the PCB land pattern provides adequate copper for the intended conversion workload.
What design features matter for ADS8364Y/2K PCB layout?
The ADS8364Y/2K layout should preserve the timing relationship of its six simultaneous-sampling channels and minimize coupling between analog inputs and parallel digital outputs. Place input filtering and decoupling close to the associated pins, route sensitive analog traces away from switching and high-current paths, and use a compact, low-impedance reference network where required by the datasheet. Because this is a 64-pin TQFP, pin escapes and simultaneous routing of all six channels deserve careful review during layout.
Can ADS8364Y/2K measure single-ended signals?
The ADS8364Y/2K is specified with six fully differential input channels, so the primary input architecture is differential. A single-ended source may be accommodated only if the external circuitry converts it to an acceptable differential signal and the resulting common-mode voltage, input range, and source impedance meet the datasheet limits. Confirm those conditions before layout; simply grounding one side of a differential input is not a substitute for a complete signal-conditioning design.
What is the lifecycle status of ADS8364Y/2K?
Texas Instruments currently lists ADS8364Y/2K as an orderable member of the ADS8364 family on its official part-details page. The manufacturer product page is the controlling source for lifecycle, ordering, and quality information. For long-term production planning, confirm the current status and any assembly or traceability requirements directly with the manufacturer or through the Request a Quote process before releasing a high-volume design.
What is the best Analog Devices equivalent for ADS8364Y/2K?
No Analog Devices cross-brand, pin-to-pin equivalent was confirmed for the ADS8364Y/2K. The device combines six fully differential simultaneous-sampling channels, 16-bit resolution, 250 kSPS conversion, parallel output, and a 64-pin TQFP footprint; matching all of those requirements is more restrictive than merely matching resolution and speed. An Analog Devices candidate should therefore be treated as a new design unless its complete pinout, interface, timing, supply, and acquisition architecture are verified.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADS8364Y/2K — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the ADS8364Y/2K when the design requires a Texas Instruments six-channel, 16-bit, 250 kSPS simultaneous-sampling SAR ADC in a 64-pin TQFP (PAG) footprint, especially for synchronized motor, inverter, or power-control measurements. The ADS8364Y/250 is the closest documented ordering candidate because the verified comparison describes the same channel count, resolution, sampling rate, and family architecture; it can be considered when its ordering suffix, packing, qualification, and production requirements match the design. ADS8364Y/250G4 is another closely related same-family MPN, but its G4 ordering designation must be checked against the manufacturer ordering table. No cross-brand drop-in candidate was confirmed because a valid equivalent must preserve the six differential inputs, parallel interface, acquisition timing, 64-pin footprint, and electrical limits. For any alternative, verify the complete pinout, operating limits, lifecycle status, and acquisition timing before substituting it into an existing design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য ADS8364Y/250 ADS8364Y/250G4
Package TQFP-64 (PAG), 10 mm × 10 mm TQFP-64 (PAG), 10 mm × 10 mm TQFP-64 (PAG), 10 mm × 10 mm
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 16 bit 16 bit 16 bit
Number of Input Channels 6 channels 6 channels 6 channels
Sampling Rate 250 kSPS per channel 250 kSPS per channel 250 kSPS per channel
Sampling Architecture Simultaneous sampling Simultaneous sampling Simultaneous sampling
Input Type Fully differential Fully differential Fully differential
Output Interface Parallel output Parallel output Parallel output

মূল পার্থক্যসমূহ

  • Six-channel simultaneous acquisition preserves measurement alignment (বনামADS8364Y/250)
  • Full 16-bit conversion resolution supports precise control-loop measurements (বনামADS8364Y/250G4)
  • Fully differential inputs support robust acquisition in noisy power systems (বনামADS8364Y/250)

ডিজাইন নোট

Preserve channel-to-channel timing by routing the six analog inputs with matched geometry and keeping each channel’s input network close to its assigned pin. Place the input filters and any differential driver as close to the converter as practical, and avoid routing analog traces beneath or beside the 16-bit parallel output bus. This is especially important in motor-control systems where switch-node transitions can couple into a 16-bit acquisition front end.

Design the analog front end around the ADS8364Y/2K’s specified input range, common-mode limits, source impedance, and acquisition time; these values must be confirmed from the manufacturer datasheet. Place antialias filtering ahead of the converter and verify its phase and transient response at the 250 kSPS operating rate. If a single-ended sensor is used, use an active differential stage rather than grounding one input and assuming the converter can accept the resulting signal directly.

Use a multilayer PCB with a continuous ground reference beneath the TQFP and separate analog and digital return paths as far as practical. Follow the manufacturer’s recommended decoupling and layout pattern, place bulk and high-frequency capacitors at the appropriate supply pins, and provide adequate exposed copper around the 64-pin device for heat spreading. Check the TQFP-64 land pattern and paste mask against the PAG mechanical drawing before fabrication.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The LCSC product listing identifies the device as RoHS compliant. No manufacturer-specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the referenced product information.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

ADS8364Y/2K datasheet ADS8364Y/2K pinout ADS8364Y/2K datasheet pdf ADS8364Y/2K equivalent ADS8364Y/2K replacement ADS8364Y/2K cross reference ADS8364Y/2K vs ADS8364Y/250 ADS8364Y/2K footprint ADS8364Y/2K application circuit Texas Instruments ADS8364Y/2K ADS8364Y/2K price ADS8364Y/2K stock 6 channel 16 bit 250kSPS ADC TQFP-64 motor control ADC

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments ADS8364Y/2K ADS8364Y/250 ADS8364Y/250G4 ADS8364 analog-to-digital converter ADC successive-approximation ADC SAR ADC data converter mixed-signal semiconductor simultaneous-sampling ADC fully differential input parallel output interface 16-bit resolution 250 kSPS motor control power control three-phase motor drive TQFP-64 PAG package surface-mount device 5 V supply anti-alias filter RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন