ADSP-BF702BCPZ-4 - 400MHz Blackfin+ DSP, 256KB SRAM | ADI
Référence : ADSP-BF702BCPZ-4 ✓ ActifADSP-BF702BCPZ-4 Présentation
A digital signal processor, or DSP, is a programmable processor optimized for arithmetic operations on continuous streams of samples. A Blackfin+ DSP belongs to the embedded processor hierarchy and combines a RISC-like instruction set with SIMD signal-processing capabilities. Its dual-MAC architecture supports efficient 16-bit, 32-bit, and 16-bit complex multiply-accumulate operations, making it suitable for audio, communications, industrial control, and embedded signal-processing systems.
Key device characteristics include a 400 MHz core frequency, 256 KB of L2 SRAM, a 16-bit/32-bit processing architecture, and low-power operation at a 1.8 V core supply. The device belongs to the ADSP-BF70x family and maintains instruction-set compatibility with earlier Blackfin processors. This compatibility supports a controlled migration path for software originally developed for the Blackfin architecture while adding the Blackfin+ SIMD processing engine.
The processor combines sequential control-flow execution with data-parallel instruction capability. Dual-MAC hardware increases throughput for filtering, modulation, transform, and audio-processing kernels, while the RISC-like instruction format supports efficient C and assembly development. External memory and interface resources allow system designers to extend data storage or connect the processor to sensors, converters, transceivers, and industrial peripherals.
Typical applications include industrial audio equipment, communications infrastructure, machine control, sensor-processing nodes, and compact embedded systems requiring deterministic real-time arithmetic. The processor is also useful in test and measurement products where predictable execution and efficient signal-chain processing are more important than general-purpose compute throughput.
Design with the ADSP-BF702BCPZ-4 by placing the exposed-pad connection to a low-impedance thermal and ground plane, routing high-speed interfaces according to the manufacturer’s reference layout, and following the datasheet’s decoupling and clock requirements. Firmware and software development should use the Blackfin+ toolchain, processor-specific initialization sequence, and memory map described in the manufacturer documentation.
This product page combines the manufacturer’s family specifications with practical guidance on package construction, clocked signal processing, internal SRAM, migration compatibility, and design trade-offs. It also identifies same-footprint Blackfin+ candidates for evaluation when speed grade, temperature grade, memory configuration, or production requirements differ.
Alternatives de remplacement direct pour ADSP-BF702BCPZ-4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ADSP-BF702BCPZ-4 (même facteur de forme et même empreinte) — différant par Instruction Set, Product Type, Mounting Type, Package.
ADSP-BF702KCPZ-4
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ADSP-BF702BCPZ-3
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADSP-BF704BCPZ-4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADSP-BF700BCPZ-2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADSP-BF702BCPZ-4 Spécifications
| Product Type | Single-core Blackfin+ digital signal processor |
| Maximum Core Clock Frequency | 400 MHz |
| L2 SRAM | 256 KB |
| Core Supply Voltage | 1.8 V |
| Processor Architecture | 16-bit/32-bit Blackfin+ |
| MAC Architecture | Dual-MAC 16-bit, 32-bit, and 16-bit complex MAC |
| Instruction Set | Blackfin+ with SIMD support; compatible with previous Blackfin products |
| Boîtier | 88-LFCSP-VQ, 12 mm x 12 mm |
| Lead Count | 88 leads |
| Type de montage | Surface mount |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Power Class | Low power |
| Core Count | 1 |
Guide de configuration des broches du ADSP-BF702BCPZ-4 88-lfcsp-vq, 12 mm x 12 mm
Configuration des broches du ADSP-BF702BCPZ-4 (boîtier 88-lfcsp-vq, 12 mm x 12 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour ADSP-BF702BCPZ-4.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ADSP-BF702BCPZ-4 convient pour 6 applications: Industrial Audio Processing, Communications Infrastructure, Industrial Sensor Processing, Machine Control and Automation, Test and Measurement Equipment, Audio and Voice Network Nodes.
Industrial Audio Processing
The ADSP-BF702BCPZ-4 fits industrial audio controllers that perform filtering, mixing, equalization, or decoding close to the audio interface. Its 400 MHz Blackfin+ core supplies dual 16-bit and 32-bit MAC hardware for sample-by-sample arithmetic, while 256 KB of L2 SRAM holds channel buffers and intermediate state. Place the processor beside the audio codec, keep clock and data traces short, and use the manufacturer reference layout to keep switching noise away from the converter’s analog section.
Recommandé
Communications Infrastructure
The ADSP-BF702BCPZ-4 is suitable for communications infrastructure nodes that perform real-time channel filtering, modulation, or packet-signal conditioning. The 400 MHz clock provides substantial instruction throughput, and the dual-MAC engine accelerates common multiply-accumulate kernels used in communication systems. Its 256 KB of L2 SRAM reduces pressure on external memory for working buffers. External interface timing and memory bandwidth should be checked against the selected protocol implementation in the manufacturer documentation.
Recommandé
Industrial Sensor Processing
The ADSP-BF702BCPZ-4 can act as the central processor in a compact sensor-conditioning node. Its Blackfin+ core executes filtering, calibration, feature extraction, and state-machine logic while the 256 KB L2 SRAM retains recent samples and processed results. Use the processor’s timer and serial resources to synchronize sensor acquisition, then validate interrupt latency and real-time scheduling for the complete control loop. The 1.8 V core supply also helps support compact, power-conscious embedded instrumentation.
Recommandé
Machine Control and Automation
The ADSP-BF702BCPZ-4 fits machine-control modules that combine deterministic digital filtering with supervisory logic. Its RISC-like Blackfin+ instruction set supports structured C code, while dual-MAC and SIMD capabilities accelerate control and signal-processing routines. The 256 KB L2 SRAM can host control loops and intermediate data without making every access depend on slower external memory. Confirm interrupt priorities, peripheral mapping, and shutdown behavior against the machine’s safety and timing requirements.
Recommandé
Test and Measurement Equipment
The ADSP-BF702BCPZ-4 is appropriate for embedded test and measurement products that perform acquisition, filtering, and analysis in one processor. The 400 MHz core supports deterministic numerical processing, and 256 KB of L2 SRAM can accommodate sample buffers and intermediate results. Its low-power design is useful in portable instruments where processor throughput must be balanced against battery consumption. Use the manufacturer clocking and grounding guidance to preserve measurement accuracy and reduce conversion-related noise.
Recommandé
Audio and Voice Network Nodes
The ADSP-BF702BCPZ-4 supports voice-network endpoints that require packet handling alongside real-time audio operations. Its 400 MHz Blackfin+ core and 256 KB of L2 SRAM can divide resources between protocol handling and sample processing, reducing the need for a separate controller. Pin multiplexing, Ethernet or serial-interface timing, and memory use vary by board configuration, so review the exact peripheral assignment in the ADSP-BF702 Data Sheet Rev. D. Firmware should include timing margins for simultaneous network and audio activity.
Recommandé
Données de référence d'ingénierie pour ADSP-BF702BCPZ-4 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADSP-BF702KCPZ-4 | ADSP-BF702BCPZ-3 | ADSP-BF704BCPZ-4 | ADSP-BF700BCPZ-2 |
|---|---|---|---|---|---|
| Package | 88-LFCSP-VQ (12x12) | 88-LFCSP-VQ (12x12) | 88-LFCSP-VQ (12x12) | 88-LFCSP-VQ (12x12) | 88-LFCSP-VQ (12x12) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Maximum Core Frequency | 400 MHz | 400 MHz | 300 MHz | 400 MHz | 200 MHz |
| Processor Architecture | 16-bit/32-bit Blackfin+ | 16-bit/32-bit Blackfin+ | 16-bit/32-bit Blackfin+ | Blackfin+ | Blackfin+ |
| Processing Engine | Dual-MAC with 16-bit, 32-bit, and 16-bit complex MAC | Dual-MAC Blackfin+ | Dual-MAC Blackfin+ | Blackfin+ SIMD engine | Blackfin+ SIMD engine |
| Orderable Suffix | BCPZ-4 | KCPZ-4 | BCPZ-3 | BCPZ-4 | BCPZ-2 |
| Product Family | ADSP-BF702 | ADSP-BF702 | ADSP-BF702 | ADSP-BF704 | ADSP-BF700 |
Principaux différenciateurs
- Higher clock rate than the 300 MHz BF702 alternative (vs ADSP-BF702BCPZ-3)
- Direct same-footprint upgrade path within the BF702 family (vs ADSP-BF702KCPZ-4)
- Substantially higher processing rate than the BF700 alternative (vs ADSP-BF700BCPZ-2)
- Single-core design with 256 KB of dedicated L2 workspace (vs ADSP-BF704BCPZ-4)
Notes de conception
The 88-LFCSP-VQ package has an exposed thermal pad that must connect to the board ground plane through the land pattern specified in the manufacturer package drawing. Thermal vias should be placed inside the pad without violating the pad geometry or drill tolerances. Because the ADSP-BF702BCPZ-4 can run at 400 MHz, verify the worst-case core and I/O activity against ambient temperature before finalizing via count and copper area.
Follow the Analog Devices recommended decoupling and high-speed layout for the 88-LFCSP-VQ package. Place bypass capacitors close to their assigned power pins, keep the clock route short, and avoid routing high-current outputs beneath the exposed pad. Maintain a continuous low-impedance ground reference beneath the device. These steps reduce supply transients and clock jitter, both of which can affect deterministic real-time signal processing.
Do not treat every same-package BF70x orderable suffix as electrically and commercially identical. Check clock speed, L2 SRAM capacity, temperature grade, qualification status, peripheral multiplexing, and exposed-pad connections before releasing a substitution. Moving from the -2 to the -4 grade also changes execution timing and power behavior, so rerun timing-sensitive firmware tests after any clock-speed upgrade.
Budget power from the core and I/O current tables in the ADSP-BF702 Data Sheet Rev. D, using the highest expected clock and I/O activity rather than an idle-condition figure. The 400 MHz grade consumes more dynamic energy than the 300 MHz ADSP-BF702BCPZ-3. If the design uses clock gating or sleep states, verify wake-up latency and memory-retention requirements to ensure the energy-saving strategy does not break real-time deadlines.
Informations de conformité
The manufacturer lists the ADSP-BF702 family as a production device. Orderable-suffix details should be checked against the current Analog Devices ordering guide for lead-free, RoHS, REACH, and qualification attributes.