Analog Devices

ADSP-BF702BCPZ-4 - 400MHz Blackfin+ DSP, 256KB SRAM | ADI

MPN: ADSP-BF702BCPZ-4 ✓ فعال
1.8 V Vdss 88-LFCSP-VQ, 12 mm x 12 mm Package 400 MHz Speed
MOQ: 1 |

ADSP-BF702BCPZ-4 جائزہ

The Analog Devices ADSP-BF702BCPZ-4 is a single-core Blackfin+ embedded digital signal processor clocked at 400 MHz, with 256 KB of L2 SRAM and an 88-lead LFCSP-VQ package measuring 12 mm by 12 mm. The -4 speed suffix identifies the 400 MHz grade, while the B suffix denotes the associated lead-temperature and qualification configuration.

A digital signal processor, or DSP, is a programmable processor optimized for arithmetic operations on continuous streams of samples. A Blackfin+ DSP belongs to the embedded processor hierarchy and combines a RISC-like instruction set with SIMD signal-processing capabilities. Its dual-MAC architecture supports efficient 16-bit, 32-bit, and 16-bit complex multiply-accumulate operations, making it suitable for audio, communications, industrial control, and embedded signal-processing systems.

Key device characteristics include a 400 MHz core frequency, 256 KB of L2 SRAM, a 16-bit/32-bit processing architecture, and low-power operation at a 1.8 V core supply. The device belongs to the ADSP-BF70x family and maintains instruction-set compatibility with earlier Blackfin processors. This compatibility supports a controlled migration path for software originally developed for the Blackfin architecture while adding the Blackfin+ SIMD processing engine.

The processor combines sequential control-flow execution with data-parallel instruction capability. Dual-MAC hardware increases throughput for filtering, modulation, transform, and audio-processing kernels, while the RISC-like instruction format supports efficient C and assembly development. External memory and interface resources allow system designers to extend data storage or connect the processor to sensors, converters, transceivers, and industrial peripherals.

Typical applications include industrial audio equipment, communications infrastructure, machine control, sensor-processing nodes, and compact embedded systems requiring deterministic real-time arithmetic. The processor is also useful in test and measurement products where predictable execution and efficient signal-chain processing are more important than general-purpose compute throughput.

Design with the ADSP-BF702BCPZ-4 by placing the exposed-pad connection to a low-impedance thermal and ground plane, routing high-speed interfaces according to the manufacturer’s reference layout, and following the datasheet’s decoupling and clock requirements. Firmware and software development should use the Blackfin+ toolchain, processor-specific initialization sequence, and memory map described in the manufacturer documentation.

This product page combines the manufacturer’s family specifications with practical guidance on package construction, clocked signal processing, internal SRAM, migration compatibility, and design trade-offs. It also identifies same-footprint Blackfin+ candidates for evaluation when speed grade, temperature grade, memory configuration, or production requirements differ.

کے لیے ڈراپ اِن متبادل ADSP-BF702BCPZ-4 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ADSP-BF702BCPZ-4 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Instruction Set, Product Type, Mounting Type, Package.

Analog Devices
Instruction Set: Orthogonal RISC-like Blackfin instruction set
Product Type: Blackfin+ Embedded Digital Signal Processor
Mounting Type: No-lead surface mount
موازنہ کریں ADSP-BF702BCPZ-4 →
Analog Devices
Instruction Set: Blackfin (instruction-set compatible with prior Blackfin families)
Product Type: Digital Signal Processor (DSP)
Package: 88-lead LFCSP-VQ (CPZ), 12x12 mm
موازنہ کریں ADSP-BF702BCPZ-4 →

ADSP-BF702KCPZ-4

✅ ڈراپ-اِن
Analog Devices
📦 88-LFCSP-VQ (12x12)
Blackfin+ Embedded Digital Signal Processor · 400 MHz · 16-bit/32-bit · 256 KByte · Dual 16-bit, 32-bit, and 16-bit complex MAC · Orthogonal RISC-like Blackfin instruction set · SIMD · 88-LFCSP-VQ

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

ADSP-BF702BCPZ-3

✅ ڈراپ-اِن
📦 88-LFCSP-VQ (12x12)
Same BF702 family, package, and 256 KB L2 SRAM, but the core speed increases from 300 MHz to 400 MHz, a 33 percent increase.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADSP-BF704BCPZ-4

✅ ڈراپ-اِن
📦 88-LFCSP-VQ (12x12)
Same 400 MHz grade and 88-LFCSP-VQ footprint, but it is a different BF70x family member with different memory and peripheral configuration details.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADSP-BF700BCPZ-2

✅ ڈراپ-اِن
📦 88-LFCSP-VQ (12x12)
Same Blackfin+ 88-LFCSP-VQ family footprint, but the core speed is 200 MHz versus 400 MHz, a 50 percent reduction, with a different memory configuration.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ADSP-BF702BCPZ-4 تفصیلات

Product Type Single-core Blackfin+ digital signal processor
Maximum Core Clock Frequency 400 MHz
L2 SRAM 256 KB
Core Supply Voltage 1.8 V
Processor Architecture 16-bit/32-bit Blackfin+
MAC Architecture Dual-MAC 16-bit, 32-bit, and 16-bit complex MAC
Instruction Set Blackfin+ with SIMD support; compatible with previous Blackfin products
پیکیج 88-LFCSP-VQ, 12 mm x 12 mm
Lead Count 88 leads
ماؤنٹنگ ٹائپ Surface mount
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
Power Class Low power
Core Count 1

ADSP-BF702BCPZ-4 88-lfcsp-vq, 12 mm x 12 mm پن کنفیگریشن گائیڈ

ADSP-BF702BCPZ-4 (88-lfcsp-vq, 12 mm x 12 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ADSP-BF702BCPZ-4 کے لیے 88-lfcsp-vq, 12 mm x 12 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ADSP-BF702BCPZ-4.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ADSP-BF702BCPZ-4 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Audio Processing, Communications Infrastructure, Industrial Sensor Processing, Machine Control and Automation, Test and Measurement Equipment, Audio and Voice Network Nodes.

🎧

Industrial Audio Processing

The ADSP-BF702BCPZ-4 fits industrial audio controllers that perform filtering, mixing, equalization, or decoding close to the audio interface. Its 400 MHz Blackfin+ core supplies dual 16-bit and 32-bit MAC hardware for sample-by-sample arithmetic, while 256 KB of L2 SRAM holds channel buffers and intermediate state. Place the processor beside the audio codec, keep clock and data traces short, and use the manufacturer reference layout to keep switching noise away from the converter’s analog section.

🌐

Communications Infrastructure

The ADSP-BF702BCPZ-4 is suitable for communications infrastructure nodes that perform real-time channel filtering, modulation, or packet-signal conditioning. The 400 MHz clock provides substantial instruction throughput, and the dual-MAC engine accelerates common multiply-accumulate kernels used in communication systems. Its 256 KB of L2 SRAM reduces pressure on external memory for working buffers. External interface timing and memory bandwidth should be checked against the selected protocol implementation in the manufacturer documentation.

🏭

Industrial Sensor Processing

The ADSP-BF702BCPZ-4 can act as the central processor in a compact sensor-conditioning node. Its Blackfin+ core executes filtering, calibration, feature extraction, and state-machine logic while the 256 KB L2 SRAM retains recent samples and processed results. Use the processor’s timer and serial resources to synchronize sensor acquisition, then validate interrupt latency and real-time scheduling for the complete control loop. The 1.8 V core supply also helps support compact, power-conscious embedded instrumentation.

🤖

Machine Control and Automation

The ADSP-BF702BCPZ-4 fits machine-control modules that combine deterministic digital filtering with supervisory logic. Its RISC-like Blackfin+ instruction set supports structured C code, while dual-MAC and SIMD capabilities accelerate control and signal-processing routines. The 256 KB L2 SRAM can host control loops and intermediate data without making every access depend on slower external memory. Confirm interrupt priorities, peripheral mapping, and shutdown behavior against the machine’s safety and timing requirements.

🔧

Test and Measurement Equipment

The ADSP-BF702BCPZ-4 is appropriate for embedded test and measurement products that perform acquisition, filtering, and analysis in one processor. The 400 MHz core supports deterministic numerical processing, and 256 KB of L2 SRAM can accommodate sample buffers and intermediate results. Its low-power design is useful in portable instruments where processor throughput must be balanced against battery consumption. Use the manufacturer clocking and grounding guidance to preserve measurement accuracy and reduce conversion-related noise.

📡

Audio and Voice Network Nodes

The ADSP-BF702BCPZ-4 supports voice-network endpoints that require packet handling alongside real-time audio operations. Its 400 MHz Blackfin+ core and 256 KB of L2 SRAM can divide resources between protocol handling and sample processing, reducing the need for a separate controller. Pin multiplexing, Ethernet or serial-interface timing, and memory use vary by board configuration, so review the exact peripheral assignment in the ADSP-BF702 Data Sheet Rev. D. Firmware should include timing margins for simultaneous network and audio activity.

What is the core frequency of the ADSP-BF702BCPZ-4?
The ADSP-BF702BCPZ-4 operates at a maximum core frequency of 400 MHz. Analog Devices identifies the part as a Blackfin+ digital signal processor in the ADSP-BF702 family, and the -4 suffix corresponds to the 400 MHz performance grade. According to the ADSP-BF702 Data Sheet Rev. D, the processor combines a dual-MAC signal-processing engine with a RISC-like instruction set, giving it substantial throughput for filtering, modulation, audio, and industrial signal-processing workloads.
How much on-chip SRAM does the ADSP-BF702BCPZ-4 contain?
The ADSP-BF702BCPZ-4 contains 256 KB of L2 SRAM. This memory provides an execution and data workspace for real-time buffers, application state, and signal-chain intermediates without requiring every access to use external memory. Analog Devices describes the ADSP-BF702 as a low-power Blackfin+ embedded processor with 256 KB of L2 SRAM. System partitioning should account for the SRAM map described in the manufacturer Data Sheet Rev. D before allocating buffers and stacks.
What package does the ADSP-BF702BCPZ-4 use?
The ADSP-BF702BCPZ-4 is supplied in an 88-lead LFCSP-VQ surface-mount package measuring 12 mm by 12 mm. The exposed-pad construction requires a PCB land pattern and thermal-via strategy defined by the manufacturer’s package drawing. The 400 MHz, 256 KB SRAM, and 88-LFCSP-VQ (12x12) configuration are confirmed on the Analog Devices ADSP-BF702 family page and the ADSP-BF702BCPZ-4 distributor listings.
Is the ADSP-BF702BCPZ-4 suitable for audio signal processing?
The ADSP-BF702BCPZ-4 is suitable for audio signal processing because its Blackfin+ core provides dual 16-bit and 32-bit MAC hardware alongside SIMD operation. Those resources support efficient implementation of filters, mixing, equalization, decoding, and audio buffering. The 400 MHz clock and 256 KB of L2 SRAM provide adequate compute and workspace for compact audio controllers, provided the external codec interface, sample rate, and memory bandwidth are matched to the system requirements.
What is the difference between the ADSP-BF702BCPZ-4 and ADSP-BF702KCPZ-4?
Both parts are 400 MHz Blackfin+ processors with 256 KB of L2 SRAM in the same 88-LFCSP-VQ (12x12) package, but their ordering suffixes designate different device configurations. The ADSP-BF702BCPZ-4 is the B suffix configuration, while the ADSP-BF702KCPZ-4 uses the K suffix. Because these suffixes can encode commercial, temperature, or qualification differences, engineers should verify the ordered-temperature and qualification rows for their specific purchase before treating the two devices as interchangeable.
Is the ADSP-BF702BCPZ-4 a drop-in replacement for ADSP-BF702BCPZ-3?
The ADSP-BF702BCPZ-3 and ADSP-BF702BCPZ-4 share the ADSP-BF702 device family, the 256 KB L2 SRAM configuration, and the 88-LFCSP-VQ (12x12) package, but the suffix change also changes the processor speed grade from 300 MHz to 400 MHz. The package and pin arrangement remain aligned, making the -4 a natural upgrade candidate. Firmware timing, thermal budgets, and any timing-sensitive external interfaces must be revalidated because the clock rate increases by 33 percent.
When should I choose the ADSP-BF702BCPZ-4 instead of the ADSP-BF700BCPZ-2?
Choose the ADSP-BF702BCPZ-4 when 400 MHz performance and 256 KB of L2 SRAM are valuable, especially for heavier DSP filtering or multimedia-style SIMD workloads. The ADSP-BF700BCPZ-2 belongs to the same Blackfin family and uses a comparable 88-lead LFCSP-VQ footprint, but it represents a lower 200 MHz grade and a different memory configuration. Migration between them is best treated as a board-level reuse opportunity that still requires firmware, timing, and thermal verification.
What can replace the ADSP-BF702BCPZ-4?
The closest same-footprint replacements are other ADSP-BF70x processors in the 88-LFCSP-VQ (12x12) package, including the ADSP-BF702KCPZ-4, ADSP-BF702BCPZ-3, ADSP-BF704BCPZ-4, and ADSP-BF700BCPZ-2. Each candidate changes at least one orderable characteristic such as speed grade, suffix, or family configuration. Treat them as upgrade or migration options rather than unconditional substitutes, and confirm clock speed, SRAM, temperature grade, peripheral configuration, and software support in the manufacturer ordering guide.
Is there an Analog Devices competitor equivalent with the same footprint?
No verified cross-manufacturer equivalent with a confirmed identical 88-LFCSP-VQ (12x12) land pattern was identified for the ADSP-BF702BCPZ-4. A processor substitution is especially sensitive because software image support, peripheral mapping, clocking, memory architecture, and exposed-pad layout must all align. Use the Analog Devices ADSP-BF70x family as the first engineering option, and validate any cross-vendor candidate against the complete pin, electrical, memory, and software requirements rather than package dimensions alone.
Where can I download the ADSP-BF702BCPZ-4 datasheet PDF?
The ADSP-BF702BCPZ-4 documentation is available through the Analog Devices ADSP-BF702 product page, which links the family Data Sheet Rev. D and supporting design materials. The manufacturer product page is the authoritative starting point for the PDF, pin descriptions, memory map, electrical characteristics, and package drawings. The ADSP-BF702BCPZ-4 PDF is also indexed by third-party datasheet aggregators, but the Analog Devices copy should be used for design decisions and current revision control.
Where can I find the ADSP-BF702BCPZ-4 pinout and package drawing?
The ADSP-BF702BCPZ-4 pinout is defined in the pin-description table and package drawing in the Analog Devices ADSP-BF702 Data Sheet Rev. D. Because the device uses an 88-lead LFCSP-VQ package with an exposed pad, assign every connection from that table rather than inferring positions from a generic footprint image. The exposed pad is not a substitute for a numbered signal pin; follow the manufacturer land-pattern and thermal-via instructions for its connection.
What are the key specifications engineers should know about the ADSP-BF702BCPZ-4?
The essential ADSP-BF702BCPZ-4 specifications are a 400 MHz core, 256 KB of L2 SRAM, a 1.8 V core supply, Blackfin+ 16-bit/32-bit processing with dual-MAC and SIMD support, and an 88-LFCSP-VQ package measuring 12 mm by 12 mm. The device operates from -40 °C to +85 °C and belongs to the ADSP-BF70x low-power processor family. Analog Devices also states that its instruction set remains compatible with previous Blackfin products, supporting controlled software migration.
How much power does the ADSP-BF702BCPZ-4 consume?
The ADSP-BF702BCPZ-4 is a low-power processor, but its exact operating current depends on core voltage, clock rate, I/O activity, memory access, and the selected operating mode. Use the core-current, I/O-current, and power-consumption tables in the ADSP-BF702 Data Sheet Rev. D for design calculations. The 400 MHz core rate increases dynamic power relative to the 300 MHz ADSP-BF702BCPZ-3, making activity-aware clocking and thermal design important in compact embedded systems.
Is the ADSP-BF702BCPZ-4 currently in production?
Yes, Analog Devices lists ADSP-BF702 as a production device and provides sample, evaluation, software, and documentation resources for the family. The ADSP-BF702BCPZ-4 is also carried in distributor catalogs as an active catalog item. Current stock, lead time, and minimum order quantity can change, so use the Request a Quote form on this page for an order confirmation tied to the exact suffix and package configuration.
How do I buy the ADSP-BF702BCPZ-4 and check the current lead time?
Use the Request a Quote form on this page to request the current unit price, stock position, lead time, and minimum order quantity for ADSP-BF702BCPZ-4. Quote requests should include the exact 88-LFCSP-VQ suffix and the required shipment quantity. The manufacturer’s sample-and-buy page also supports prototype sourcing for the ADSP-BF702 family. Current commercial availability is assessed during quotation because production status does not guarantee an immediate allocation for every order quantity.
Can ADSP-BF704BCPZ-4 replace the ADSP-BF702BCPZ-4 on the same PCB?
The ADSP-BF704BCPZ-4 uses the same 88-LFCSP-VQ (12x12) family package and the same 400 MHz speed designation as the ADSP-BF702BCPZ-4, but it represents a different BF70x member rather than an identical part. It can serve as a platform migration option when its memory, peripheral set, and product configuration satisfy the design. Before replacing the device, verify the exposed-pad connection, pin multiplexing, memory map, supply requirements, and required software libraries in both datasheets.

کے لیے انجینئرنگ ریفرنس ڈیٹا ADSP-BF702BCPZ-4 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ADSP-BF702BCPZ-4 when the design needs a 400 MHz single-core Blackfin+ processor, 256 KB of L2 SRAM, and an 88-LFCSP-VQ (12x12) footprint. It is a practical upgrade over the ADSP-BF702BCPZ-3 when the extra 100 MHz of clock rate provides useful throughput, although firmware timing and power must be revalidated. Consider the ADSP-BF702KCPZ-4 when its ordering configuration better matches the required temperature or qualification profile. The ADSP-BF704BCPZ-4 is appropriate when its family-specific memory and peripheral resources fit the product, and the ADSP-BF700BCPZ-2 is a lower-speed option when 200 MHz performance is sufficient. Because all four share the family footprint, board reuse may be possible, but suffix-specific electrical limits, software support, timing, and exposed-pad requirements must be checked before substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ ADSP-BF702KCPZ-4 ADSP-BF702BCPZ-3 ADSP-BF704BCPZ-4 ADSP-BF700BCPZ-2
Package 88-LFCSP-VQ (12x12) 88-LFCSP-VQ (12x12) 88-LFCSP-VQ (12x12) 88-LFCSP-VQ (12x12) 88-LFCSP-VQ (12x12)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Maximum Core Frequency 400 MHz 400 MHz 300 MHz 400 MHz 200 MHz
Processor Architecture 16-bit/32-bit Blackfin+ 16-bit/32-bit Blackfin+ 16-bit/32-bit Blackfin+ Blackfin+ Blackfin+
Processing Engine Dual-MAC with 16-bit, 32-bit, and 16-bit complex MAC Dual-MAC Blackfin+ Dual-MAC Blackfin+ Blackfin+ SIMD engine Blackfin+ SIMD engine
Orderable Suffix BCPZ-4 KCPZ-4 BCPZ-3 BCPZ-4 BCPZ-2
Product Family ADSP-BF702 ADSP-BF702 ADSP-BF702 ADSP-BF704 ADSP-BF700

اہم امتیازی خصوصیات

  • Higher clock rate than the 300 MHz BF702 alternative (بمقابلہADSP-BF702BCPZ-3)
  • Direct same-footprint upgrade path within the BF702 family (بمقابلہADSP-BF702KCPZ-4)
  • Substantially higher processing rate than the BF700 alternative (بمقابلہADSP-BF700BCPZ-2)
  • Single-core design with 256 KB of dedicated L2 workspace (بمقابلہADSP-BF704BCPZ-4)

ڈیزائن نوٹس

The 88-LFCSP-VQ package has an exposed thermal pad that must connect to the board ground plane through the land pattern specified in the manufacturer package drawing. Thermal vias should be placed inside the pad without violating the pad geometry or drill tolerances. Because the ADSP-BF702BCPZ-4 can run at 400 MHz, verify the worst-case core and I/O activity against ambient temperature before finalizing via count and copper area.

Follow the Analog Devices recommended decoupling and high-speed layout for the 88-LFCSP-VQ package. Place bypass capacitors close to their assigned power pins, keep the clock route short, and avoid routing high-current outputs beneath the exposed pad. Maintain a continuous low-impedance ground reference beneath the device. These steps reduce supply transients and clock jitter, both of which can affect deterministic real-time signal processing.

Do not treat every same-package BF70x orderable suffix as electrically and commercially identical. Check clock speed, L2 SRAM capacity, temperature grade, qualification status, peripheral multiplexing, and exposed-pad connections before releasing a substitution. Moving from the -2 to the -4 grade also changes execution timing and power behavior, so rerun timing-sensitive firmware tests after any clock-speed upgrade.

Budget power from the core and I/O current tables in the ADSP-BF702 Data Sheet Rev. D, using the highest expected clock and I/O activity rather than an idle-condition figure. The 400 MHz grade consumes more dynamic energy than the 300 MHz ADSP-BF702BCPZ-3. If the design uses clock gating or sleep states, verify wake-up latency and memory-retention requirements to ensure the energy-saving strategy does not break real-time deadlines.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer lists the ADSP-BF702 family as a production device. Orderable-suffix details should be checked against the current Analog Devices ordering guide for lead-free, RoHS, REACH, and qualification attributes.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ADSP-BF702BCPZ-4 ADSP-BF702BCPZ-4 datasheet ADSP-BF702BCPZ-4 datasheet pdf ADSP-BF702BCPZ-4 pinout ADSP-BF702BCPZ-4 400MHz specifications ADSP-BF702BCPZ-4 256KB SRAM ADSP-BF702BCPZ-4 88-LFCSP-VQ ADSP-BF702BCPZ-4 equivalent ADSP-BF702BCPZ-4 replacement ADSP-BF702BCPZ-4 vs ADSP-BF702BCPZ-3 Analog Devices ADSP-BF702BCPZ-4 ADSP-BF702BCPZ-4 price ADSP-BF702BCPZ-4 lead time ADSP-BF702BCPZ-4 industrial audio DSP

متعلقہ اجزاء اور اصطلاحات

Analog Devices ADSP-BF702BCPZ-4 ADSP-BF702 ADSP-BF702KCPZ-4 ADSP-BF702BCPZ-3 ADSP-BF704BCPZ-4 ADSP-BF700BCPZ-2 Blackfin+ Blackfin processor digital signal processor DSP embedded processor dual-MAC SIMD RISC-like instruction set 16-bit arithmetic 32-bit arithmetic 256 KB L2 SRAM 400 MHz core clock 1.8 V core supply 88-LFCSP-VQ LFCSP surface mount exposed pad industrial audio processing communication signal processing sensor processing machine control test and measurement
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں