Analog Devices

ADV7181DBCPZ-RL 10-Bit Multiformat Video Decoder | Analog Devices

Référence : ADV7181DBCPZ-RL ✓ Actif
3.15 V to 3.45 V Vdss PAL, NTSC, and SECAM Rds(on) 64-lead LFCSP-VQ, 9 mm by 9 mm Package
MOQ : 1 |

ADV7181DBCPZ-RL Présentation

The Analog Devices ADV7181DBCPZ-RL is a 10-bit single-chip multiformat video decoder and graphics digitizer with four ADC inputs, supporting PAL, NTSC, and SECAM composite or S-Video signals and producing digital ITU-R BT.656 output. It is packaged in a 64-lead LFCSP-VQ surface-mount package measuring 9 mm by 9 mm.

A video decoder is an interface IC that converts analog television signals into a standardized digital pixel stream. In the signal-chain hierarchy, it sits between composite or S-Video inputs and an FPGA, ASIC, display controller, or digital video processor. Its conversion stage, adaptive filtering, demodulation, and output formatting allow a compact system to process legacy broadcast video without implementing those functions in external discrete components.

The ADV7181D supports PAL, NTSC, and SECAM decoding and accepts composite or S-Video input. Its digital interface produces ITU-R BT.656 data, while the advertised 10-bit digitization provides the key conversion resolution. The four ADC inputs add flexibility for multi-channel or multi-source capture, and the integrated decoder reduces component count in industrial monitoring, broadcast, professional video, and legacy conversion systems.

The ADV7181D combines analog front-end conversion, multiformat demodulation, and digital output formatting in one device. Its digital supply range is 1.65 V to 2 V, while its analog supply range is 3.15 V to 3.45 V, allowing separate digital and analog rails in systems with independently regulated voltage domains. The exact operating-junction limits, clocking requirements, register set, and input performance must be confirmed from the manufacturer datasheet before layout is finalized.

Typical uses include PAL or NTSC video capture, SECAM source conversion, industrial inspection equipment, video capture cards, surveillance systems, and professional video conversion. A suitable design must route the selected analog source into the correct ADC input, provide compatible clocking and digital interface connections, and configure the decoder registers for the intended standard and output format.

PCB implementation requires careful separation of analog and digital supply paths, short analog traces, a solid ground plane, and low-impedance connections to the digital output interface. The exposed pad requires the manufacturer’s specified thermal-via and solder-land geometry. Use the Analog Devices pin-description table to assign all 64 package connections before schematic capture and PCB routing.

This page organizes the confirmed decoding capabilities, supply requirements, package details, sourcing information, and drop-in alternatives into an engineering-oriented reference. It also highlights package, temperature-range, and automotive qualifications that should be checked against the complete manufacturer datasheet before production release.

Alternatives de remplacement direct pour ADV7181DBCPZ-RL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADV7181DBCPZ-RL (même facteur de forme et même empreinte) — différant par Product Type.

Analog Devices
Product Type: Multiformat video decoder and graphics digitizer
Comparer avec ADV7181DBCPZ-RL →

ADV7181DBCPZ

✅ Remplacement direct
Analog Devices
📦 64-LFCSP-VQ (9x9 mm)
Multiformat video decoder and graphics digitizer · 10 bit · 4 · ITU-R BT.656 · PAL, NTSC, and SECAM · Composite video · S-Video · Component RGB and YPrPb video

Contactez-nous pour le prix

Voir la fiche technique →

ADV7181DWBCPZ

✅ Remplacement direct
📦 64-LFCSP-VQ (9x9 mm)
Automotive-designated ADV7181D variant versus the standard ADV7181DBCPZ-RL ordering option; operating limits and qualification details require confirmation

📋 Alternative de référence (hors catalogue)

ADV7181DBCPZ-RL Spécifications

Product Type 10-bit multiformat video decoder and graphics digitizer
Supported Video Standards PAL, NTSC, and SECAM
Analog Input Type Composite or S-Video
Digital Output Format ITU-R BT.656
ADC Input Count 4 inputs
Digitization Resolution 10 bit
Analog Supply Voltage 3.15 V to 3.45 V
Digital Supply Voltage 1.65 V to 2 V
Boîtier 64-lead LFCSP-VQ, 9 mm by 9 mm
Type de montage Surface mount
Maximum Reflow Temperature 255 °C ± 5 °C
Lead-Free Soldering Supported
Conventional SnPb Soldering Supported at 220 °C to 235 °C reflow

Guide de configuration des broches du ADV7181DBCPZ-RL 64-lead lfcsp-vq, 9 mm by 9 mm

Configuration des broches du ADV7181DBCPZ-RL (boîtier 64-lead lfcsp-vq, 9 mm by 9 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 64-lead lfcsp-vq, 9 mm by 9 mm pour le ADV7181DBCPZ-RL

Aucune donnée de brochage détaillée disponible pour ADV7181DBCPZ-RL.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADV7181DBCPZ-RL convient pour 6 applications: Industrial Inspection Video Capture, Professional Video Conversion, Security and Surveillance Systems, Broadcast Legacy Source Interface, Video Capture Card, Educational Video Processor Platform.

🏭

Industrial Inspection Video Capture

The ADV7181DBCPZ-RL fits industrial inspection systems that ingest composite or S-Video camera output and need a standardized digital interface for processing. Its four 10-bit ADC inputs support multichannel source selection, while PAL, NTSC, and SECAM support allows equipment to operate across regions using different analog television standards. The decoder generates ITU-R BT.656 output for capture logic, an FPGA, or an image-processing pipeline. Design the analog front end for the selected camera signal, keep short traces between the source and ADC inputs, and isolate noisy switching circuitry from the video path. The separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital supplies also allow deliberate rail partitioning, although sequencing and decoupling must follow the manufacturer application guidance.

📺

Professional Video Conversion

The ADV7181DBCPZ-RL is appropriate for professional equipment that converts legacy analog video into a digital stream while preserving a manageable external interface. It accepts PAL, NTSC, or SECAM composite or S-Video and supplies ITU-R BT.656 data at a 10-bit digitization resolution, allowing downstream devices to use a conventional parallel video interface. In a converter chassis, the device can sit behind input connectors and isolation or conditioning circuitry, followed by an FPGA or digital video processor. Its integrated four-input ADC structure reduces the number of separate decoder assemblies needed for multiple sources. Validate input amplitude, synchronization, chroma performance, and supported resolution against the manufacturer specifications before production, and configure all decoding and output registers for the intended source standard.

🎥

Security and Surveillance Systems

The ADV7181DBCPZ-RL can support legacy surveillance installations where cameras still provide composite or S-Video rather than a modern digital video interface. PAL and NTSC support covers common camera formats, and the ITU-R BT.656 output can feed a dedicated video processor, capture controller, or FPGA for recording and display. Use the four ADC inputs to support multiple analog channels when the board architecture permits, but ensure that each source has the required conditioning and isolation. Because surveillance electronics may share power with switching regulators and long cable runs, the analog supply and video traces require careful isolation, grounding, and filtering. The 3.15 V to 3.45 V analog rail and 1.65 V to 2 V digital rail should be regulated independently where system partitioning allows.

🌐

Broadcast Legacy Source Interface

The ADV7181DBCPZ-RL serves as an interface for broadcast or media equipment that must accept multiformat analog video and present it to modern digital processing. PAL, NTSC, and SECAM support makes it useful in systems intended to handle legacy feeds from different regions, while ITU-R BT.656 provides a defined digital output for downstream scaling, processing, or recording logic. The 10-bit conversion path can help preserve low-level analog information when the complete signal chain is designed for equivalent fidelity. Professional installations should characterize synchronization behavior, input bandwidth, chroma decoding, and output timing using the Analog Devices datasheet. Keep the analog section away from high-energy switching stages, provide low-noise supply rails, and route the digital output with controlled timing margin to the receiving FPGA or processor.

🖥️

Video Capture Card

The ADV7181DBCPZ-RL is well suited to video capture cards that need reliable analog-to-digital conversion before image processing. Four ADC inputs allow a board to implement multiple standard-definition sources, and the decoder’s multiformat support simplifies systems intended to work with more than one regional video standard. The resulting ITU-R BT.656 stream can be routed to an FPGA, image processor, or display controller using controlled digital layout practices. In a dense capture card, keep connector and protection networks away from the ADC pins, provide uninterrupted ground planes, and decouple the analog and digital supplies independently. The exposed pad should use the manufacturer’s recommended thermal layout even when the decoder’s power consumption is distributed across analog, digital, and clocking functions. Register programming should be validated for each supported standard and input route.

🔧

Educational Video Processor Platform

The ADV7181DBCPZ-RL can support an educational video processor platform in which students or engineers study analog television decoding, embedded video interfaces, and mixed-signal PCB design. The four 10-bit ADC inputs provide multiple points for experimenting with source selection and signal routing, while PAL, NTSC, and SECAM support demonstrates how one decoder can handle several standards. ITU-R BT.656 output provides a well-defined connection to FPGA logic for image processing. A practical training board should expose registers, clocks, synchronization signals, and test points, while separating analog input routing from digital processing. Start with the manufacturer evaluation hardware and ADV7181D design documentation, then reproduce the recommended power, grounding, and exposed-pad arrangements before adding custom processing or enclosure features.

Récapitulatif des produits recommandés

ADV7181DBCPZ Analog Devices Utilisé dans : Industrial Inspection Video Capture, Professional Video Conversion, Security and Surveillance Systems, Broadcast Legacy Source Interface, Video Capture Card, Educational Video Processor Platform EVAL-ADV7181D Evaluation platform for the ADV7181D decoder Utilisé dans : Industrial Inspection Video Capture, Security and Surveillance Systems, Video Capture Card, Educational Video Processor Platform ADV7181DWBCPZ Automotive-designated member of the ADV7181D family Utilisé dans : Professional Video Conversion, Broadcast Legacy Source Interface
What is the ADV7181DBCPZ-RL used for?
The ADV7181DBCPZ-RL is used to decode PAL, NTSC, and SECAM composite or S-Video signals into an ITU-R BT.656 digital video stream. According to the Analog Devices ADV7181D datasheet, it combines a four-input 10-bit video ADC, multiformat demodulation, filtering, and digital output processing in one 64-lead LFCSP-VQ package. This integration supports legacy video capture in industrial monitoring, professional conversion, broadcast, and security equipment without implementing a separate decoder board.
What are the key specifications of ADV7181DBCPZ-RL that engineers should know?
The principal specifications are a 10-bit digitizer, four ADC inputs, support for PAL, NTSC, and SECAM, and ITU-R BT.656 digital output. The Analog Devices ADV7181D datasheet identifies a 3.15 V to 3.45 V analog supply range and a 1.65 V to 2 V digital supply range. The component is supplied in a 64-lead, 9 mm by 9 mm LFCSP-VQ surface-mount package with an exposed pad, making thermal-pad construction and exposed-pad land geometry essential PCB design considerations.
Where can I download the ADV7181DBCPZ-RL datasheet PDF?
The official ADV7181DBCPZ-RL datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7181D.PDF. The manufacturer document covers the decoder architecture, supported video standards, supply requirements, register configuration, electrical characteristics, and package information. Engineers should use its pin-description table and recommended application circuit when assigning the 64 package connections and laying out the exposed-pad footprint.
Where can I find the ADV7181DBCPZ-RL pinout?
The ADV7181DBCPZ-RL pinout is found in the pin-description table and package drawing in the official Analog Devices ADV7181D datasheet. The device uses a 64-lead LFCSP-VQ package measuring 9 mm by 9 mm, so every physical connection and the exposed thermal pad must be reconciled against that table before PCB routing. Do not infer unused-pin status from a generic 64-pin drawing because the ADV7181D assigns specific analog, digital, clock, supply, ground, and control functions.
What is the difference between ADV7181DBCPZ and ADV7181DBCPZ-RL?
Both parts identify the same ADV7181D 10-bit multiformat video decoder in a 64-lead LFCSP-VQ package, while their ordering suffixes distinguish the manufacturer’s packaging configuration. The ADV7181DBCPZ listing is identified as the base 64-LFCSP-VQ device, whereas ADV7181DBCPZ-RL is the tape-and-reel ordering option. Electrical and pin-compatibility conclusions should be confirmed against the ordering information in the Analog Devices datasheet before treating one as a replacement for the other.
Is ADV7181DBCPZ-RL suitable for PAL and NTSC video capture?
Yes, the ADV7181DBCPZ-RL supports PAL, NTSC, and SECAM decoding from composite or S-Video inputs and outputs ITU-R BT.656 digital data. According to the Analog Devices ADV7181D product information, the device is intended for high-quality multiformat video decoding and graphics digitization. Suitability for a particular capture chain also depends on correct input bandwidth, clock configuration, digital interface implementation, and register setup for the selected video standard.
What is the best drop-in replacement for ADV7181DBCPZ-RL?
ADV7181DBCPZ is the closest documented same-family alternative because it uses the same 64-LFCSP-VQ, 9 mm by 9 mm package and identifies the same ADV7181D decoder platform. ADV7181DWBCPZ is another same-package candidate listed as an automotive version, but its qualification and operating limits should be checked before substitution. The ADV7181DBCPZ-R2, -R7, and -RL7 variants are ordering-code alternatives whose distinct functional benefits are not established, so they should not be treated as drop-in replacements without further review.
Can ADV7181DWBCPZ replace ADV7181DBCPZ-RL?
ADV7181DWBCPZ is a potential same-package replacement because comparison data identifies it as a 64-lead LFCSP video decoder associated with the ADV7181D family, while ADV7181DBCPZ-RL is the tape-and-reel ordering option. Its automotive classification introduces qualification and operating-condition questions that must be resolved before installation. Confirm the complete pin list, supply ratings, temperature limits, and register compatibility in the manufacturer documentation before replacing the original device.
When should I choose ADV7181DBCPZ-RL over ADV7181DBCPZ?
Choose ADV7181DBCPZ-RL when the production BOM specifically requires Analog Devices’ tape-and-reel ordering option for the 64-LFCSP ADV7181D decoder. Choose the base ADV7181DBCPZ listing when its documented packaging and ordering configuration better matches the assembly process. Because both identify the same decoder family and package, the practical selection should be based on confirmed package drawing, electrical limits, operating temperature, qualification, and assembly format rather than on the decoder feature set.
What can replace ADV7181DBCPZ-RL?
ADV7181DBCPZ and ADV7181DWBCPZ are the closest documented candidates for an ADV7181DBCPZ-RL replacement because both are associated with the 64-lead LFCSP ADV7181D decoder family. ADV7181DBCPZ provides the closest ordering-family match, while the automotive-designated ADV7181DWBCPZ may offer a different qualification context. The ADV7181C is not a drop-in substitute because Analog Devices states that migration requires hardware and software changes, including differences in pin compatibility and recommended settings.
Is ADV7181DBCPZ-RL the same as ADV7181DWBCPZ?
No, ADV7181DBCPZ-RL and ADV7181DWBCPZ are related ADV7181D-family devices but are not the same ordering code. ADV7181DBCPZ-RL is identified as the tape-and-reel 64-LFCSP option, while ADV7181DWBCPZ is described as an automotive 64-LFCSP version. Their shared package family makes them candidates for evaluation, not automatic substitutes; verify pin assignments, temperature range, qualification, and operating limits before exchanging one for the other.
What is the best Analog Devices equivalent for ADV7181DBCPZ-RL?
ADV7181DBCPZ is the strongest same-manufacturer equivalent candidate because it is listed in the same 64-LFCSP-VQ, 9 mm by 9 mm package and represents the base ordering option of the ADV7181D decoder. ADV7181DWBCPZ adds an automotive designation and may be relevant when that qualification is desired. No cross-brand drop-in equivalent is established by the available cross-reference results, so a functional video-decoder substitute should not be assumed to be pin-compatible.
How should the analog and digital supplies be connected on ADV7181DBCPZ-RL?
The ADV7181DBCPZ-RL uses separate supply ranges: 3.15 V to 3.45 V for the analog section and 1.65 V to 2 V for the digital section. Follow the Analog Devices ADV7181D datasheet for the designated supply pins, decoupling values, sequencing rules, and exposed-pad connection. Keep analog and digital return paths disciplined on the PCB, place bypass capacitors close to their associated pins, and maintain continuous ground-plane continuity beneath the device.
Does ADV7181DBCPZ-RL support lead-free PCB assembly?
Yes, the ADV7181D datasheet states that the ADV7181D is suitable for Pb-free applications and can withstand surface-mount soldering up to 255 °C ± 5 °C. It also remains compatible with conventional SnPb soldering processes using conventional 220 °C to 235 °C reflow temperatures. The package’s exposed thermal pad must still be assembled according to the manufacturer’s land pattern and thermal-via recommendations, and local assembly temperature profiles should remain within the device limits.
Where can I buy ADV7181DBCPZ-RL online?
Use the Request a Quote form on this page to request the ADV7181DBCPZ-RL, current availability, and commercial terms. The component is identified as a 64-lead LFCSP-VQ tape-and-reel ordering option from Analog Devices. Before requesting a quotation, confirm the exact MPN, reel format, quantity, and any required automotive qualification or extended-temperature variant so the assembled part matches the intended design.
What is the price of ADV7181DBCPZ-RL?
Current commercial pricing for the ADV7181DBCPZ-RL should be requested through the Request a Quote form on this page because quotation terms and component availability can change. The form allows the required quantity, reel format, target date, and delivery location to be included in the request. Engineers can use the structured part data on this page to verify the 10-bit decoder, supported standards, supply ranges, and 64-lead package before placing the order.
What is the lead time for ADV7181DBCPZ-RL?
The current lead time for ADV7181DBCPZ-RL should be requested through the Request a Quote form on this page. The request should identify the required quantity, packaging format, production schedule, and destination so the supplier can confirm an accurate delivery commitment. Because the part is listed as active and is manufactured in a 64-lead LFCSP-VQ package, it is appropriate to request a production schedule rather than assume immediate availability.
Is ADV7181DBCPZ-RL in stock?
Current stock for ADV7181DBCPZ-RL should be confirmed through the Request a Quote form on this page, where quantity and required delivery date can be included in the request. The component is identified as active and offered in a tape-and-reel configuration, but inventory varies by reel, quantity, and shipment destination. Use the Request a Quote response for the current availability commitment rather than relying on an unconfirmed stock indication.

Données de référence d'ingénierie pour ADV7181DBCPZ-RL — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADV7181DBCPZ-RL when the bill of materials specifically requires the tape-and-reel ordering option of Analog Devices’ 64-LFCSP ADV7181D decoder. It supports PAL, NTSC, and SECAM composite or S-Video sources and produces a 10-bit ITU-R BT.656 output, making it appropriate for industrial capture, surveillance, broadcast conversion, and legacy video-processing equipment. Consider ADV7181DBCPZ when the base ordering option better matches your assembly plan, after confirming the exact ordering table and package drawing. Consider ADV7181DWBCPZ only when its automotive designation matches the qualification target, because its operating limits and qualification requirements must be checked separately. No cross-brand pin-compatible replacement is established, and the ADV7181C is explicitly not seamless because its pin compatibility and recommended settings differ.

Comparaison avec les alternatives

Paramètre Ce produit ADV7181DBCPZ ADV7181DWBCPZ
Package 64-LFCSP-VQ, 9 mm by 9 mm 64-LFCSP-VQ, 9 mm by 9 mm 64-LFCSP-VQ, 9 mm by 9 mm
Brand Analog Devices Analog Devices Analog Devices
Device Type 10-bit multiformat video decoder 10-bit multiformat video decoder 10-bit video decoder
ADC Input Count 4 inputs 4 inputs 4 ADC inputs

Principaux différenciateurs

  • Four-input 10-bit multiformat decoding (vs ADV7181DWBCPZ)
  • Direct support for PAL, NTSC, and SECAM (vs ADV7181DWBCPZ)
  • Single-package analog-to-digital conversion (vs ADV7181DBCPZ)

Notes de conception

Partition the layout into analog input and digital output regions. Place input protection, coupling, filtering, and ADC-routing components close to the corresponding pins, while keeping clock and digital output traces away from sensitive video inputs. Maintain a continuous ground plane, avoid routing digital return currents beneath the analog input area, and use the Analog Devices recommended decoupling configuration for the separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital rails.

Treat the exposed pad as both an electrical connection and a thermal path. Reproduce the manufacturer’s 64-lead LFCSP land pattern, including the exposed-pad dimensions and recommended via geometry, rather than substituting a generic QFN footprint. Provide uninterrupted top-layer copper and a nearby ground plane, and verify junction-temperature limits in the assembled enclosure because airflow and neighboring heat sources affect the allowable ambient condition.

Do not treat the ADV7181DBCPZ-RL and ADV7181C as interchangeable. Analog Devices states that migration from ADV7181C to ADV7181D requires hardware and software changes because pin compatibility and recommended settings differ. Also verify whether a substitute uses the same exposed-pad geometry, supply sequence, clock source, and register map; a shared 64-lead package name alone does not establish complete drop-in compatibility.

Use controlled-impedance routing for the ITU-R BT.656 digital interface and maintain a continuous reference plane beneath the output signals. Confirm clock timing, output-enable behavior, and synchronization requirements in the datasheet before finalizing trace lengths. Keep the four analog input paths symmetrical where practical, minimize loop area, and locate termination or filtering networks where they can be tuned without disturbing the other video channels.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Yes
Sans halogène
Unknown
Minerais de conflit
Unknown

The Analog Devices ADV7181D datasheet states that the device is suitable for Pb-free applications and supports conventional SnPb soldering. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements were not established.

Recherches associées

ADV7181DBCPZ-RL datasheet ADV7181DBCPZ-RL pinout ADV7181DBCPZ-RL datasheet pdf ADV7181DBCPZ-RL equivalent ADV7181DBCPZ-RL replacement ADV7181DBCPZ-RL cross reference ADV7181DBCPZ-RL footprint ADV7181DBCPZ-RL price ADV7181DBCPZ-RL stock Analog Devices ADV7181DBCPZ-RL ADV7181DBCPZ vs ADV7181DWBCPZ ADV7181D 64 LFCSP video decoder ADV7181D PAL NTSC SECAM decoder ADV7181D application circuit

Composants & termes associés

Analog Devices ADV7181DBCPZ-RL ADV7181D ADV7181DBCPZ ADV7181DWBCPZ ADV7181C EVAL-ADV7181D video decoder graphics digitizer video decoder IC interface IC semiconductor PAL NTSC SECAM composite video S-Video ITU-R BT.656 10-bit ADC four ADC inputs 64-LFCSP-VQ LFCSP package family surface mount analog supply voltage digital supply voltage
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ