ADV7181DBCPZ-RL 10-Bit Multiformat Video Decoder | Analog Devices
部品番号: ADV7181DBCPZ-RL ✓ 生産中ADV7181DBCPZ-RL 概要
A video decoder is an interface IC that converts analog television signals into a standardized digital pixel stream. In the signal-chain hierarchy, it sits between composite or S-Video inputs and an FPGA, ASIC, display controller, or digital video processor. Its conversion stage, adaptive filtering, demodulation, and output formatting allow a compact system to process legacy broadcast video without implementing those functions in external discrete components.
The ADV7181D supports PAL, NTSC, and SECAM decoding and accepts composite or S-Video input. Its digital interface produces ITU-R BT.656 data, while the advertised 10-bit digitization provides the key conversion resolution. The four ADC inputs add flexibility for multi-channel or multi-source capture, and the integrated decoder reduces component count in industrial monitoring, broadcast, professional video, and legacy conversion systems.
The ADV7181D combines analog front-end conversion, multiformat demodulation, and digital output formatting in one device. Its digital supply range is 1.65 V to 2 V, while its analog supply range is 3.15 V to 3.45 V, allowing separate digital and analog rails in systems with independently regulated voltage domains. The exact operating-junction limits, clocking requirements, register set, and input performance must be confirmed from the manufacturer datasheet before layout is finalized.
Typical uses include PAL or NTSC video capture, SECAM source conversion, industrial inspection equipment, video capture cards, surveillance systems, and professional video conversion. A suitable design must route the selected analog source into the correct ADC input, provide compatible clocking and digital interface connections, and configure the decoder registers for the intended standard and output format.
PCB implementation requires careful separation of analog and digital supply paths, short analog traces, a solid ground plane, and low-impedance connections to the digital output interface. The exposed pad requires the manufacturer’s specified thermal-via and solder-land geometry. Use the Analog Devices pin-description table to assign all 64 package connections before schematic capture and PCB routing.
This page organizes the confirmed decoding capabilities, supply requirements, package details, sourcing information, and drop-in alternatives into an engineering-oriented reference. It also highlights package, temperature-range, and automotive qualifications that should be checked against the complete manufacturer datasheet before production release.
ドロップイン代替品: ADV7181DBCPZ-RL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ADV7181DBCPZ-RL (同一形状・フットプリント) — 相違点: Product Type.
ADV7181DBCPZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →ADV7181DWBCPZ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ADV7181DBCPZ-RL 仕様
| Product Type | 10-bit multiformat video decoder and graphics digitizer |
| Supported Video Standards | PAL, NTSC, and SECAM |
| Analog Input Type | Composite or S-Video |
| Digital Output Format | ITU-R BT.656 |
| ADC Input Count | 4 inputs |
| Digitization Resolution | 10 bit |
| Analog Supply Voltage | 3.15 V to 3.45 V |
| Digital Supply Voltage | 1.65 V to 2 V |
| パッケージ | 64-lead LFCSP-VQ, 9 mm by 9 mm |
| 実装タイプ | Surface mount |
| Maximum Reflow Temperature | 255 °C ± 5 °C |
| Lead-Free Soldering | Supported |
| Conventional SnPb Soldering | Supported at 220 °C to 235 °C reflow |
ADV7181DBCPZ-RL 64-lead lfcsp-vq, 9 mm by 9 mm ピン配置ガイド
ADV7181DBCPZ-RL (64-lead lfcsp-vq, 9 mm by 9 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ADV7181DBCPZ-RL.
詳細は データシート をご参照ください。
主な用途
ADV7181DBCPZ-RL の用途: 6 件s: Industrial Inspection Video Capture, Professional Video Conversion, Security and Surveillance Systems, Broadcast Legacy Source Interface, Video Capture Card, Educational Video Processor Platform.
Industrial Inspection Video Capture
The ADV7181DBCPZ-RL fits industrial inspection systems that ingest composite or S-Video camera output and need a standardized digital interface for processing. Its four 10-bit ADC inputs support multichannel source selection, while PAL, NTSC, and SECAM support allows equipment to operate across regions using different analog television standards. The decoder generates ITU-R BT.656 output for capture logic, an FPGA, or an image-processing pipeline. Design the analog front end for the selected camera signal, keep short traces between the source and ADC inputs, and isolate noisy switching circuitry from the video path. The separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital supplies also allow deliberate rail partitioning, although sequencing and decoupling must follow the manufacturer application guidance.
おすすめ
Professional Video Conversion
The ADV7181DBCPZ-RL is appropriate for professional equipment that converts legacy analog video into a digital stream while preserving a manageable external interface. It accepts PAL, NTSC, or SECAM composite or S-Video and supplies ITU-R BT.656 data at a 10-bit digitization resolution, allowing downstream devices to use a conventional parallel video interface. In a converter chassis, the device can sit behind input connectors and isolation or conditioning circuitry, followed by an FPGA or digital video processor. Its integrated four-input ADC structure reduces the number of separate decoder assemblies needed for multiple sources. Validate input amplitude, synchronization, chroma performance, and supported resolution against the manufacturer specifications before production, and configure all decoding and output registers for the intended source standard.
おすすめ
Security and Surveillance Systems
The ADV7181DBCPZ-RL can support legacy surveillance installations where cameras still provide composite or S-Video rather than a modern digital video interface. PAL and NTSC support covers common camera formats, and the ITU-R BT.656 output can feed a dedicated video processor, capture controller, or FPGA for recording and display. Use the four ADC inputs to support multiple analog channels when the board architecture permits, but ensure that each source has the required conditioning and isolation. Because surveillance electronics may share power with switching regulators and long cable runs, the analog supply and video traces require careful isolation, grounding, and filtering. The 3.15 V to 3.45 V analog rail and 1.65 V to 2 V digital rail should be regulated independently where system partitioning allows.
おすすめ
Broadcast Legacy Source Interface
The ADV7181DBCPZ-RL serves as an interface for broadcast or media equipment that must accept multiformat analog video and present it to modern digital processing. PAL, NTSC, and SECAM support makes it useful in systems intended to handle legacy feeds from different regions, while ITU-R BT.656 provides a defined digital output for downstream scaling, processing, or recording logic. The 10-bit conversion path can help preserve low-level analog information when the complete signal chain is designed for equivalent fidelity. Professional installations should characterize synchronization behavior, input bandwidth, chroma decoding, and output timing using the Analog Devices datasheet. Keep the analog section away from high-energy switching stages, provide low-noise supply rails, and route the digital output with controlled timing margin to the receiving FPGA or processor.
おすすめ
Video Capture Card
The ADV7181DBCPZ-RL is well suited to video capture cards that need reliable analog-to-digital conversion before image processing. Four ADC inputs allow a board to implement multiple standard-definition sources, and the decoder’s multiformat support simplifies systems intended to work with more than one regional video standard. The resulting ITU-R BT.656 stream can be routed to an FPGA, image processor, or display controller using controlled digital layout practices. In a dense capture card, keep connector and protection networks away from the ADC pins, provide uninterrupted ground planes, and decouple the analog and digital supplies independently. The exposed pad should use the manufacturer’s recommended thermal layout even when the decoder’s power consumption is distributed across analog, digital, and clocking functions. Register programming should be validated for each supported standard and input route.
おすすめ
Educational Video Processor Platform
The ADV7181DBCPZ-RL can support an educational video processor platform in which students or engineers study analog television decoding, embedded video interfaces, and mixed-signal PCB design. The four 10-bit ADC inputs provide multiple points for experimenting with source selection and signal routing, while PAL, NTSC, and SECAM support demonstrates how one decoder can handle several standards. ITU-R BT.656 output provides a well-defined connection to FPGA logic for image processing. A practical training board should expose registers, clocks, synchronization signals, and test points, while separating analog input routing from digital processing. Start with the manufacturer evaluation hardware and ADV7181D design documentation, then reproduce the recommended power, grounding, and exposed-pad arrangements before adding custom processing or enclosure features.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ADV7181DBCPZ-RL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ADV7181DBCPZ | ADV7181DWBCPZ |
|---|---|---|---|
| Package | 64-LFCSP-VQ, 9 mm by 9 mm | 64-LFCSP-VQ, 9 mm by 9 mm | 64-LFCSP-VQ, 9 mm by 9 mm |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Device Type | 10-bit multiformat video decoder | 10-bit multiformat video decoder | 10-bit video decoder |
| ADC Input Count | 4 inputs | 4 inputs | 4 ADC inputs |
主な差別化要因
- Four-input 10-bit multiformat decoding (vs ADV7181DWBCPZ)
- Direct support for PAL, NTSC, and SECAM (vs ADV7181DWBCPZ)
- Single-package analog-to-digital conversion (vs ADV7181DBCPZ)
設計ノート
Partition the layout into analog input and digital output regions. Place input protection, coupling, filtering, and ADC-routing components close to the corresponding pins, while keeping clock and digital output traces away from sensitive video inputs. Maintain a continuous ground plane, avoid routing digital return currents beneath the analog input area, and use the Analog Devices recommended decoupling configuration for the separate 3.15 V to 3.45 V analog and 1.65 V to 2 V digital rails.
Treat the exposed pad as both an electrical connection and a thermal path. Reproduce the manufacturer’s 64-lead LFCSP land pattern, including the exposed-pad dimensions and recommended via geometry, rather than substituting a generic QFN footprint. Provide uninterrupted top-layer copper and a nearby ground plane, and verify junction-temperature limits in the assembled enclosure because airflow and neighboring heat sources affect the allowable ambient condition.
Do not treat the ADV7181DBCPZ-RL and ADV7181C as interchangeable. Analog Devices states that migration from ADV7181C to ADV7181D requires hardware and software changes because pin compatibility and recommended settings differ. Also verify whether a substitute uses the same exposed-pad geometry, supply sequence, clock source, and register map; a shared 64-lead package name alone does not establish complete drop-in compatibility.
Use controlled-impedance routing for the ITU-R BT.656 digital interface and maintain a continuous reference plane beneath the output signals. Confirm clock timing, output-enable behavior, and synchronization requirements in the datasheet before finalizing trace lengths. Keep the four analog input paths symmetrical where practical, minimize loop area, and locate termination or filtering networks where they can be tuned without disturbing the other video channels.
コンプライアンス情報
The Analog Devices ADV7181D datasheet states that the device is suitable for Pb-free applications and supports conventional SnPb soldering. Explicit RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statements were not established.