Analog Devices

ADV7182WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices

Référence : ADV7182WBCPZ-RL ✗ Fin de vie
Up to 4 V Vdss NTSC, PAL, SECAM Rds(on) 32-LFCSP (5 x 5 mm) Package
MOQ : 1 |

ADV7182WBCPZ-RL Présentation

Analog Devices ADV7182WBCPZ-RL is a 10-bit standard-definition television video decoder with differential inputs, four analog video input channels, and a 32-LFCSP 5 x 5 mm package. It converts worldwide NTSC, PAL, and SECAM composite, S-Video, and component baseband signals into a 4:2:2 component video data stream compatible with the 8-bit ITU-R BT.656 interface.

A video decoder is a signal-processing IC that recovers digital luminance and chrominance data from an analog baseband video signal. It sits between an analog camera or video source and a digital display, video processor, image sensor, or FPGA. In the device hierarchy, the ADV7182 is an analog-to-digital video conversion IC within the broader ADC/DAC and signal-processing semiconductor categories.

The decoder uses a 10-bit ADC with 4-times oversampling per channel for CVBS, Y/C, and YPrPb formats. Fully differential, pseudo-differential, and single-ended input configurations are supported. Four analog input channels provide flexibility for composite, S-Video, or component sources, while on-chip antialiasing filtering reduces unwanted out-of-band energy before conversion.

External horizontal sync, vertical sync, and field signals can provide timing references for LCD controllers and other video ASICs. The output stage supports 8-bit ITU-R BT.656, while the internal converter preserves 10-bit processing resolution. The ADV7182 family also offers automatic standard detection and demodulation, reducing the host processor burden during analog-to-digital video conversion.

Typical uses include automotive infotainment displays, industrial vision panels, surveillance equipment, video capture modules, and legacy analog-video interface boards. The differential-input architecture is particularly useful when the source has substantial ground offset or noise coupling, although correct source impedance and grounding remain essential to preserve signal integrity.

Design the board around the 32-LFCSP exposed-pad land pattern, analog input routing, and the manufacturer's recommended decoupling. Place analog and digital return paths carefully, provide low-impedance connections to the exposed pad, and account for thermal performance when the surrounding PCB cannot dissipate heat effectively. The manufacturer marks the ADV7182 as not recommended for new designs, so legacy maintenance and compatible-product migration require careful review.

This page organizes the functional capabilities, lifecycle position, package constraints, drop-in candidates, interface considerations, and application-specific trade-offs. It also identifies where board-level validation is necessary because analog video noise, synchronization, and thermal performance depend on the complete source and receiver implementation rather than on the decoder alone.

Alternatives de remplacement direct pour ADV7182WBCPZ-RL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ADV7182WBCPZ-RL (même facteur de forme et même empreinte) — différant par ADC Resolution, Host Control Interface, Oversampling, Package, Product Type.

Analog Devices
ADC Resolution: 10-bit
Host Control Interface: I2C
Oversampling: 4x per channel (CVBS, Y/C, YPrPb)
Comparer avec ADV7182WBCPZ-RL →

ADV7182AWBCPZ

✅ Remplacement direct
📦 32-LFCSP (5 x 5 mm)
Both provide 10-bit decoding in the same 32-LFCSP footprint; ordering-suffix qualification and lifecycle details must be matched before substitution.

📋 Alternative de référence (hors catalogue)

ADV7182A

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 32-LFCSP (5 x 5 mm)
Retains the 10-bit decoder architecture and the ADV7182 pinout with software compatibility; revision-specific feature differences are not stated in the cited page.

📋 Alternative de référence (hors catalogue)

ADV7182WBCPZ

✅ Remplacement direct
Analog Devices
📦 32-LFCSP (5 x 5 mm)
10-Bit SDTV Video Decoder with Differential Inputs · 10-bit · 4x per channel (CVBS, Y/C, YPrPb) · 4 · NTSC, PAL, SECAM · CVBS (composite), Y/C (S-Video), YPrPb (component) · Fully differential, pseudo-differential, and single-ended CVBS video inputs · up to 4 V

Contactez-nous pour le prix

Voir la fiche technique →

ADV7182WBCPZ-RL Valeurs maximales et caractéristiques électriques

Product Type 10-bit SDTV video decoder
ADC Resolution 10 bits
Supported Video Standards NTSC, PAL, SECAM
Supported Input Formats CVBS composite, Y/C S-Video, YPrPb component
Analog Input Channels 4 channels
Oversampling 4 times per channel
Video Output Format 4:2:2 component video
Output Interface 8-bit ITU-R BT.656 serial interface
Host Control Interface I2C serial interface
Input Configuration Fully differential, pseudo-differential, or single-ended
External Timing References Horizontal sync, vertical sync, and field signals
Analog Antialiasing Filter On-chip filter
Maximum Analog Input Voltage Up to 4 V
Boîtier 32-LFCSP (5 x 5 mm)
Package Pin Count 32 pins
Type de montage Surface mount
Automotive Qualification AEC-Q100 qualified
Statut RoHS Compliant
REACH Status Unaffected
Lifecycle Recommendation Not recommended for new designs

Guide de configuration des broches du ADV7182WBCPZ-RL 32 pins

Configuration des broches du ADV7182WBCPZ-RL (boîtier 32 pins). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 32 pins pour le ADV7182WBCPZ-RL

Aucune donnée de brochage détaillée disponible pour ADV7182WBCPZ-RL.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ADV7182WBCPZ-RL convient pour 6 applications: Automotive Infotainment Display, Industrial Vision Monitor, Video Surveillance Interface, Industrial Video Capture Card, Legacy Broadcast Monitoring, Video Test and Measurement Equipment.

🚗

Automotive Infotainment Display

The ADV7182WBCPZ-RL fits automotive display systems that must accept legacy analog baseband video while also satisfying AEC-Q100 qualification requirements. Its 10-bit conversion stage, four analog input channels, and automatic NTSC, PAL, and SECAM detection allow one decoder to serve composite, S-Video, or component sources. Differential or pseudo-differential inputs can improve noise immunity when the video source is remote. The resulting 4:2:2 data is delivered through the ITU-R BT.656 interface for connection to a display controller, scaler, or application processor. Because the family is not recommended for new designs, automotive programs should also evaluate the pin-compatible ADV7182A family and confirm its qualification and ordering configuration.

🏭

Industrial Vision Monitor

The ADV7182WBCPZ-RL can terminate analog composite or S-Video signals in industrial vision monitors that must interoperate with legacy camera equipment. Four input channels reduce the need for external source-select circuitry when several video sources must be monitored, while the on-chip antialiasing filter and 10-bit ADC provide a consistent conversion path. The decoder automatically recognizes NTSC, PAL, and SECAM, simplifying configuration across mixed equipment fleets. Its 4:2:2 output can feed a scaler, FPGA, or image-processing chain through the 8-bit ITU-R BT.656 interface. Layout should keep analog traces short, provide a continuous return path, and verify timing margins at the system level.

🎥

Video Surveillance Interface

The ADV7182WBCPZ-RL is appropriate for surveillance interface modules that receive standard analog camera video and convert it for digital recording or display. Automatic standard detection handles mixed NTSC, PAL, and SECAM sources, while four inputs allow multiple composite channels to be routed into the decoder. The 10-bit ADC and 4-times-per-channel oversampling support faithful reproduction of camera imagery before conversion to a 4:2:2 stream. A host controller can configure the device through I2C and synchronize using external horizontal sync, vertical sync, and field references. In deployed systems, differential input support helps manage cable-coupled noise, but surge protection and source isolation should be designed separately from the decoder.

🖥️

Industrial Video Capture Card

The ADV7182WBCPZ-RL supports legacy video capture cards requiring multiple analog inputs and a standardized digital output. Its four channels accept composite, S-Video, or component sources, and the decoder handles worldwide color-standard detection before producing 4:2:2 component data. The 8-bit ITU-R BT.656 interface is suitable for connection to FPGA logic, an image processor, or a capture controller, while I2C permits register-based setup and status access. The 32-LFCSP footprint supports compact multi-channel boards, although exposed-pad heat spreading and analog isolation must be considered. Existing capture designs can use the part for maintenance, while new designs should evaluate the lifecycle-recommended ADV7182A family.

📺

Legacy Broadcast Monitoring

The ADV7182WBCPZ-RL can serve in broadcast-monitoring equipment that receives analog composite feeds from professional or industrial sources. Automatic NTSC, PAL, and SECAM recognition simplifies multi-format operation, and the four analog channels support redundant or multi-source monitoring. Differential, pseudo-differential, and single-ended configurations provide flexibility for different generator interfaces, but each source still requires impedance and termination planning. The decoded 4:2:2 signal can be sampled by an FPGA or display controller over ITU-R BT.656, with external synchronization inputs providing deterministic timing references. For professional monitoring, validate video levels, jitter tolerance, channel skew, and electromagnetic immunity across the complete receiver rather than relying only on nominal decoder performance.

🔧

Video Test and Measurement Equipment

The ADV7182WBCPZ-RL is useful in test and measurement products that must analyze or display standard-definition analog video. The four input channels permit comparison of multiple formats, while automatic standard detection and external horizontal, vertical, and field references support repeatable timing measurements. A 10-bit ADC with 4-times-per-channel oversampling provides a suitable conversion front end for FPGA-based measurement logic or a digital display pipeline. Because instrumentation accuracy also depends on source impedance, cable length, termination, and grounding, the decoder should be evaluated as part of the complete analog front end. Maintenance of installed instruments can retain this device, while new platforms should compare the ADV7182A family for lifecycle and software compatibility.

Récapitulatif des produits recommandés

ADV7182A Pin-compatible and software-compatible family migration option Utilisé dans : Automotive Infotainment Display, Industrial Vision Monitor, Industrial Video Capture Card, Video Test and Measurement Equipment ADV7182WBCPZ-RL Analog Devices Utilisé dans : Automotive Infotainment Display, Industrial Video Capture Card ADV7182AWBCPZ Same-footprint 10-bit decoder family option Utilisé dans : Industrial Vision Monitor, Video Surveillance Interface, Legacy Broadcast Monitoring, Video Test and Measurement Equipment ADV7182WBCPZ Analog Devices Utilisé dans : Video Surveillance Interface, Legacy Broadcast Monitoring
What is the ADV7182WBCPZ-RL?
The ADV7182WBCPZ-RL is a 10-bit, four-channel standard-definition analog video decoder that outputs 4:2:2 component data through an 8-bit ITU-R BT.656 interface. According to the Analog Devices ADV7182 Data Sheet Rev. C, it automatically detects NTSC, PAL, and SECAM signals and supports composite, S-Video, and component inputs. The device is packaged in a 32-LFCSP measuring 5 x 5 mm.
What video standards does ADV7182WBCPZ-RL support?
The ADV7182WBCPZ-RL supports NTSC, PAL, and SECAM baseband video. The Analog Devices ADV7182 Data Sheet Rev. C describes automatic standard detection, 10-bit conversion, 4-times-per-channel oversampling, and support for CVBS, Y/C, and YPrPb sources. Four analog channels allow several composite or S-Video inputs to be multiplexed into the decoder.
Where can I download the ADV7182WBCPZ-RL datasheet PDF?
The official ADV7182WBCPZ-RL datasheet PDF is available from Analog Devices through the ADV7182 Data Sheet Rev. C at analog.com. Use the manufacturer document for the complete pin-description table, electrical characteristics, input limits, timing parameters, register information, and recommended application circuit. The ADV7182 product page also links to the same family documentation and current lifecycle information.
Where can I find the ADV7182WBCPZ-RL pinout?
The ADV7182WBCPZ-RL pinout is shown in the pin-description table and package drawing in the Analog Devices ADV7182 Data Sheet Rev. C. The device uses a 32-LFCSP package with an exposed thermal pad. Assign every board track and exposed-pad connection from the official package diagram rather than relying on a generic package drawing or an unverified pin map.
Can ADV7182AWBCPZ replace ADV7182WBCPZ-RL?
The ADV7182AWBCPZ is the closest same-family candidate identified for the ADV7182WBCPZ-RL because it is also described as a 10-bit differential-input video decoder in a 32-LFCSP 5 x 5 mm package. The ADV7182A family retains the ADV7182 pinout and is software compatible, but temperature grade, qualification, and ordering suffix should still be checked against the system requirements before replacement.
What is the best drop-in replacement for ADV7182WBCPZ-RL?
The ADV7182AWBCPZ is the best-supported drop-in candidate identified for the ADV7182WBCPZ-RL because both are 10-bit video decoders in a 32-LFCSP 5 x 5 mm package. The ADV7182A family is also documented as having the same pinout and software compatibility as the ADV7182. No verified cross-brand, pin-compatible replacement was identified, so an equivalent from another manufacturer should not be assumed.
Is ADV7182A compatible with ADV7182WBCPZ-RL software?
The ADV7182A is documented as having the same pinout and software compatibility as the ADV7182. This makes the family a practical migration path for a board designed around ADV7182WBCPZ-RL. Analog Devices still marks the original ADV7182 as not recommended for new designs, so existing hardware can be maintained while new programs evaluate the ADV7182A and its ordering options.
ADV7182WBCPZ-RL vs ADV7182AWBCPZ: which is better for automotive use?
ADV7182WBCPZ-RL is identified as an automotive AEC-Q100-qualified decoder, while the ADV7182AWBCPZ ordering and qualification details must be matched to the specific manufacturer part listing. Both use the 32-LFCSP 5 x 5 mm package and provide 10-bit decoding, making footprint compatibility strong. Final substitution still requires checking the temperature range, automotive qualification, and production suffix.
When should I choose ADV7182WBCPZ-RL instead of ADV7182A?
Choose ADV7182WBCPZ-RL when maintaining an existing 10-bit, 32-LFCSP video-decoder design that specifically requires the AEC-Q100 automotive qualification and the established ADV7182 behavior. Choose ADV7182A for new designs when its documented pinout and software compatibility align with the host controller. Because ADV7182 is not recommended for new designs, lifecycle requirements may outweigh familiarity with the original device.
Is ADV7182WBCPZ-RL suitable for industrial surveillance and automotive displays?
The ADV7182WBCPZ-RL is suitable for applications using NTSC, PAL, or SECAM baseband video, including surveillance, industrial vision, and automotive display systems. Its four inputs, 10-bit ADC, antialiasing filter, and AEC-Q100 qualification support these uses. Source amplitude, synchronization, thermal conditions, and electromagnetic compatibility must still be validated at the system level.
How should power and decoupling be handled for ADV7182WBCPZ-RL?
Use the supply values, capacitor values, and bypass arrangement specified in the Analog Devices ADV7182 Data Sheet Rev. C. Place required input and output capacitors adjacent to their associated package pins, maintain the exposed-pad land pattern, and connect the thermal pad to the required copper area. High-frequency video signals should not share narrow return paths with digital switching currents.
Does ADV7182WBCPZ-RL require special PCB layout for differential video inputs?
Yes, the analog input network and its ground reference require careful PCB planning. Keep the video traces short, preserve the intended differential or pseudo-differential geometry, and use a quiet analog ground region connected according to the manufacturer application guidance. Place input protection and termination components where they do not create excessive parasitic capacitance or unequal channel delay.
Where can I buy ADV7182WBCPZ-RL and what is its lead time?
Use the Request a Quote form on this page to request ADV7182WBCPZ-RL availability, current lead time, and a quotation for the exact reel-loaded ordering code. The manufacturer identifies the ADV7182 family as not recommended for new designs, which may affect procurement planning. A direct quote keeps the request tied to the exact MPN, package suffix, and required quantity.
What is the price of ADV7182WBCPZ-RL?
The current commercial terms for ADV7182WBCPZ-RL are shown through the Request a Quote form on this page. The exact amount can vary with quantity, delivery schedule, and required packaging. Because the component is an older NRND device, request an explicit stock and lead-time confirmation rather than relying on a generic family price or an unqualified historical listing.
Is ADV7182WBCPZ-RL in stock for immediate shipment?
Current stock status for the exact ADV7182WBCPZ-RL should be confirmed through the Request a Quote form on this page. Because the manufacturer marks the ADV7182 family as not recommended for new designs, inventory and allocation should be tied to the exact ordering suffix and requested quantity. The quote response provides the appropriate commercial confirmation for production or maintenance demand.
What are the key specifications of ADV7182WBCPZ-RL that engineers should know?
The key specifications are a 10-bit ADC, four analog video inputs, 4-times-per-channel oversampling, NTSC/PAL/SECAM decoding, 4:2:2 output, an 8-bit ITU-R BT.656 data interface, and I2C host control. The Analog Devices ADV7182 Data Sheet Rev. C also identifies fully differential, pseudo-differential, and single-ended input support, on-chip antialiasing filtering, and a 32-LFCSP 5 x 5 mm package.

Données de référence d'ingénierie pour ADV7182WBCPZ-RL — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ADV7182WBCPZ-RL for maintenance or existing production platforms that specifically require the established 10-bit ADV7182 behavior, four analog inputs, NTSC/PAL/SECAM decoding, 8-bit ITU-R BT.656 output, and the identified AEC-Q100 qualification. Choose ADV7182A for new or lifecycle-driven programs because Analog Devices documents the same pinout and software compatibility as the ADV7182. Choose ADV7182AWBCPZ when its exact temperature grade, qualification, and ordering suffix satisfy the system requirements and the board is designed for the common 32-LFCSP footprint. Do not select a cross-brand substitute solely because it is also a video decoder; no verified cross-brand, pin-to-pin-compatible replacement was identified. Final selection must include signal-level timing checks, analog layout review, thermal validation, and confirmation of the exact manufacturer ordering code.

Comparaison avec les alternatives

Paramètre Ce produit ADV7182AWBCPZ ADV7182A ADV7182WBCPZ
Package 32-LFCSP (5 x 5 mm) 32-LFCSP (5 x 5 mm) 32-LFCSP (5 x 5 mm) 32-LFCSP (5 x 5 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices
ADC Resolution 10 bits 10 bits 10 bits 10 bits
Supported Video Standards NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM
Output Format 4:2:2 component video 4:2:2 component video 4:2:2 component video 4:2:2 component video
Output Interface 8-bit ITU-R BT.656 8-bit ITU-R BT.656 8-bit ITU-R BT.656 8-bit ITU-R BT.656
Analog Input Channels 4 channels 4 channels 4 channels 4 channels
Software Compatibility ADV7182 register behavior ADV7182 family behavior Documented as software compatible with ADV7182 ADV7182 family behavior

Principaux différenciateurs

  • Maintains the established 10-bit ADV7182 conversion architecture (vs ADV7182A)
  • Directly identified as an AEC-Q100 automotive video decoder (vs ADV7182AWBCPZ)
  • Provides the same 32-LFCSP footprint and 10-bit resolution (vs ADV7182WBCPZ)

Notes de conception

Route each analog video input as a short, controlled-impedance trace and place input termination, protection, and filtering components close to the corresponding package pins. Differential and pseudo-differential configurations must preserve intended pair geometry. Avoid placing switching-current return paths beneath the video inputs, and use the manufacturer reference layout to define the analog and digital grounding strategy.

Implement the supply network and bypass capacitors according to the Analog Devices ADV7182 Data Sheet Rev. C. Place the required capacitor(s) adjacent to the associated power and ground pins to control high-frequency impedance, and avoid long loops between capacitor connections and package pads. Validate the supply sequence and signal levels at power-up if the source or downstream controller has unusual startup behavior.

Treat the exposed pad as both an electrical connection and a thermal path. Follow the package-land-pattern guidance and provide uninterrupted copper where the PCB design rules permit. Estimated thermal performance depends on copper area, airflow, ambient temperature, and the adjacent board stackup, so measure junction temperature in the assembled enclosure before assigning a maximum operating condition.

Check analog input amplitude, source impedance, channel-to-channel skew, sync timing, and jitter at the system level. The decoder can accept differential, pseudo-differential, and single-ended sources, but each mode changes the external input network and ground-rejection requirements. Use the manufacturer electrical-characteristics tables and timing diagrams as acceptance limits for the complete source-to-display channel.

Do not treat a matching package as sufficient evidence of a safe replacement. Confirm the exact ordering suffix, temperature range, AEC-Q100 status, software behavior, supply pins, exposed-pad connection, and lifecycle requirement. The ADV7182A family is documented as pinout and software compatible with ADV7182, but individual orderable variants still require review against the complete bill of materials.

Informations de conformité

RoHS
Compliant
REACH
Compliant
AEC-Q100
Qualified
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The ADV7182WBCPZ family is identified as RoHS compliant, REACH unaffected, and AEC-Q100 qualified. Lead-free, halogen-free, and conflict-minerals status are not stated.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ADV7182WBCPZ-RL datasheet ADV7182WBCPZ-RL pinout ADV7182WBCPZ-RL datasheet pdf ADV7182WBCPZ-RL equivalent ADV7182WBCPZ-RL replacement ADV7182WBCPZ-RL schematic ADV7182WBCPZ-RL 32-LFCSP footprint Analog Devices ADV7182WBCPZ-RL ADV7182WBCPZ-RL price ADV7182WBCPZ-RL stock ADV7182WBCPZ-RL vs ADV7182A ADV7182 10-bit video decoder

Composants & termes associés

Analog Devices ADV7182WBCPZ-RL ADV7182AWBCPZ ADV7182A ADV7182WBCPZ 10-bit video decoder standard-definition television decoder analog-to-digital converter ADC 4:2:2 component video NTSC PAL SECAM ITU-R BT.656 I2C CVBS S-Video YPrPb differential input on-chip antialiasing filter 32-LFCSP surface mount AEC-Q100 RoHS REACH automotive infotainment industrial vision video surveillance
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ