ADV7182WBCPZ-RL - 10-Bit SDTV Video Decoder | Analog Devices
MPN: ADV7182WBCPZ-RL ✗ 停產ADV7182WBCPZ-RL 概覽
A video decoder is a signal-processing IC that recovers digital luminance and chrominance data from an analog baseband video signal. It sits between an analog camera or video source and a digital display, video processor, image sensor, or FPGA. In the device hierarchy, the ADV7182 is an analog-to-digital video conversion IC within the broader ADC/DAC and signal-processing semiconductor categories.
The decoder uses a 10-bit ADC with 4-times oversampling per channel for CVBS, Y/C, and YPrPb formats. Fully differential, pseudo-differential, and single-ended input configurations are supported. Four analog input channels provide flexibility for composite, S-Video, or component sources, while on-chip antialiasing filtering reduces unwanted out-of-band energy before conversion.
External horizontal sync, vertical sync, and field signals can provide timing references for LCD controllers and other video ASICs. The output stage supports 8-bit ITU-R BT.656, while the internal converter preserves 10-bit processing resolution. The ADV7182 family also offers automatic standard detection and demodulation, reducing the host processor burden during analog-to-digital video conversion.
Typical uses include automotive infotainment displays, industrial vision panels, surveillance equipment, video capture modules, and legacy analog-video interface boards. The differential-input architecture is particularly useful when the source has substantial ground offset or noise coupling, although correct source impedance and grounding remain essential to preserve signal integrity.
Design the board around the 32-LFCSP exposed-pad land pattern, analog input routing, and the manufacturer's recommended decoupling. Place analog and digital return paths carefully, provide low-impedance connections to the exposed pad, and account for thermal performance when the surrounding PCB cannot dissipate heat effectively. The manufacturer marks the ADV7182 as not recommended for new designs, so legacy maintenance and compatible-product migration require careful review.
This page organizes the functional capabilities, lifecycle position, package constraints, drop-in candidates, interface considerations, and application-specific trade-offs. It also identifies where board-level validation is necessary because analog video noise, synchronization, and thermal performance depend on the complete source and receiver implementation rather than on the decoder alone.
直接替換替代品,適用於 ADV7182WBCPZ-RL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADV7182WBCPZ-RL (相同外形與佔位) — 差異在於 ADC Resolution, Host Control Interface, Oversampling, Package, Product Type.
ADV7182AWBCPZ
✅ 直接替換📋 參考替代品(不在目錄中)
ADV7182A
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
ADV7182WBCPZ
✅ 直接替換聯絡詢價
查看資料表 →ADV7182WBCPZ-RL 最大額定值與電氣特性
| Product Type | 10-bit SDTV video decoder |
| ADC Resolution | 10 bits |
| Supported Video Standards | NTSC, PAL, SECAM |
| Supported Input Formats | CVBS composite, Y/C S-Video, YPrPb component |
| Analog Input Channels | 4 channels |
| Oversampling | 4 times per channel |
| Video Output Format | 4:2:2 component video |
| Output Interface | 8-bit ITU-R BT.656 serial interface |
| Host Control Interface | I2C serial interface |
| Input Configuration | Fully differential, pseudo-differential, or single-ended |
| External Timing References | Horizontal sync, vertical sync, and field signals |
| Analog Antialiasing Filter | On-chip filter |
| Maximum Analog Input Voltage | Up to 4 V |
| 封裝 | 32-LFCSP (5 x 5 mm) |
| Package Pin Count | 32 pins |
| 安裝類型 | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| RoHS 狀態 | Compliant |
| REACH Status | Unaffected |
| Lifecycle Recommendation | Not recommended for new designs |
ADV7182WBCPZ-RL 32 pins 腳位配置指南
ADV7182WBCPZ-RL(32 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADV7182WBCPZ-RL.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADV7182WBCPZ-RL 適用於 6 應用s: Automotive Infotainment Display, Industrial Vision Monitor, Video Surveillance Interface, Industrial Video Capture Card, Legacy Broadcast Monitoring, Video Test and Measurement Equipment.
Automotive Infotainment Display
The ADV7182WBCPZ-RL fits automotive display systems that must accept legacy analog baseband video while also satisfying AEC-Q100 qualification requirements. Its 10-bit conversion stage, four analog input channels, and automatic NTSC, PAL, and SECAM detection allow one decoder to serve composite, S-Video, or component sources. Differential or pseudo-differential inputs can improve noise immunity when the video source is remote. The resulting 4:2:2 data is delivered through the ITU-R BT.656 interface for connection to a display controller, scaler, or application processor. Because the family is not recommended for new designs, automotive programs should also evaluate the pin-compatible ADV7182A family and confirm its qualification and ordering configuration.
推薦
Industrial Vision Monitor
The ADV7182WBCPZ-RL can terminate analog composite or S-Video signals in industrial vision monitors that must interoperate with legacy camera equipment. Four input channels reduce the need for external source-select circuitry when several video sources must be monitored, while the on-chip antialiasing filter and 10-bit ADC provide a consistent conversion path. The decoder automatically recognizes NTSC, PAL, and SECAM, simplifying configuration across mixed equipment fleets. Its 4:2:2 output can feed a scaler, FPGA, or image-processing chain through the 8-bit ITU-R BT.656 interface. Layout should keep analog traces short, provide a continuous return path, and verify timing margins at the system level.
推薦
Video Surveillance Interface
The ADV7182WBCPZ-RL is appropriate for surveillance interface modules that receive standard analog camera video and convert it for digital recording or display. Automatic standard detection handles mixed NTSC, PAL, and SECAM sources, while four inputs allow multiple composite channels to be routed into the decoder. The 10-bit ADC and 4-times-per-channel oversampling support faithful reproduction of camera imagery before conversion to a 4:2:2 stream. A host controller can configure the device through I2C and synchronize using external horizontal sync, vertical sync, and field references. In deployed systems, differential input support helps manage cable-coupled noise, but surge protection and source isolation should be designed separately from the decoder.
推薦
Industrial Video Capture Card
The ADV7182WBCPZ-RL supports legacy video capture cards requiring multiple analog inputs and a standardized digital output. Its four channels accept composite, S-Video, or component sources, and the decoder handles worldwide color-standard detection before producing 4:2:2 component data. The 8-bit ITU-R BT.656 interface is suitable for connection to FPGA logic, an image processor, or a capture controller, while I2C permits register-based setup and status access. The 32-LFCSP footprint supports compact multi-channel boards, although exposed-pad heat spreading and analog isolation must be considered. Existing capture designs can use the part for maintenance, while new designs should evaluate the lifecycle-recommended ADV7182A family.
推薦
Legacy Broadcast Monitoring
The ADV7182WBCPZ-RL can serve in broadcast-monitoring equipment that receives analog composite feeds from professional or industrial sources. Automatic NTSC, PAL, and SECAM recognition simplifies multi-format operation, and the four analog channels support redundant or multi-source monitoring. Differential, pseudo-differential, and single-ended configurations provide flexibility for different generator interfaces, but each source still requires impedance and termination planning. The decoded 4:2:2 signal can be sampled by an FPGA or display controller over ITU-R BT.656, with external synchronization inputs providing deterministic timing references. For professional monitoring, validate video levels, jitter tolerance, channel skew, and electromagnetic immunity across the complete receiver rather than relying only on nominal decoder performance.
推薦
Video Test and Measurement Equipment
The ADV7182WBCPZ-RL is useful in test and measurement products that must analyze or display standard-definition analog video. The four input channels permit comparison of multiple formats, while automatic standard detection and external horizontal, vertical, and field references support repeatable timing measurements. A 10-bit ADC with 4-times-per-channel oversampling provides a suitable conversion front end for FPGA-based measurement logic or a digital display pipeline. Because instrumentation accuracy also depends on source impedance, cable length, termination, and grounding, the decoder should be evaluated as part of the complete analog front end. Maintenance of installed instruments can retain this device, while new platforms should compare the ADV7182A family for lifecycle and software compatibility.
推薦
推薦產品摘要
工程參考資料,適用於 ADV7182WBCPZ-RL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADV7182AWBCPZ | ADV7182A | ADV7182WBCPZ |
|---|---|---|---|---|
| Package | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| ADC Resolution | 10 bits | 10 bits | 10 bits | 10 bits |
| Supported Video Standards | NTSC, PAL, SECAM | NTSC, PAL, SECAM | NTSC, PAL, SECAM | NTSC, PAL, SECAM |
| Output Format | 4:2:2 component video | 4:2:2 component video | 4:2:2 component video | 4:2:2 component video |
| Output Interface | 8-bit ITU-R BT.656 | 8-bit ITU-R BT.656 | 8-bit ITU-R BT.656 | 8-bit ITU-R BT.656 |
| Analog Input Channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Software Compatibility | ADV7182 register behavior | ADV7182 family behavior | Documented as software compatible with ADV7182 | ADV7182 family behavior |
主要差異化特點
- Maintains the established 10-bit ADV7182 conversion architecture (對比ADV7182A)
- Directly identified as an AEC-Q100 automotive video decoder (對比ADV7182AWBCPZ)
- Provides the same 32-LFCSP footprint and 10-bit resolution (對比ADV7182WBCPZ)
設計說明
Route each analog video input as a short, controlled-impedance trace and place input termination, protection, and filtering components close to the corresponding package pins. Differential and pseudo-differential configurations must preserve intended pair geometry. Avoid placing switching-current return paths beneath the video inputs, and use the manufacturer reference layout to define the analog and digital grounding strategy.
Implement the supply network and bypass capacitors according to the Analog Devices ADV7182 Data Sheet Rev. C. Place the required capacitor(s) adjacent to the associated power and ground pins to control high-frequency impedance, and avoid long loops between capacitor connections and package pads. Validate the supply sequence and signal levels at power-up if the source or downstream controller has unusual startup behavior.
Treat the exposed pad as both an electrical connection and a thermal path. Follow the package-land-pattern guidance and provide uninterrupted copper where the PCB design rules permit. Estimated thermal performance depends on copper area, airflow, ambient temperature, and the adjacent board stackup, so measure junction temperature in the assembled enclosure before assigning a maximum operating condition.
Check analog input amplitude, source impedance, channel-to-channel skew, sync timing, and jitter at the system level. The decoder can accept differential, pseudo-differential, and single-ended sources, but each mode changes the external input network and ground-rejection requirements. Use the manufacturer electrical-characteristics tables and timing diagrams as acceptance limits for the complete source-to-display channel.
Do not treat a matching package as sufficient evidence of a safe replacement. Confirm the exact ordering suffix, temperature range, AEC-Q100 status, software behavior, supply pins, exposed-pad connection, and lifecycle requirement. The ADV7182A family is documented as pinout and software compatible with ADV7182, but individual orderable variants still require review against the complete bill of materials.
合規資訊
The ADV7182WBCPZ family is identified as RoHS compliant, REACH unaffected, and AEC-Q100 qualified. Lead-free, halogen-free, and conflict-minerals status are not stated.