ADV7393WBCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices
Référence : ADV7393WBCPZ-REEL ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.85 | $12,85 |
| 10 | $11.6 | $116,00 |
| 100 | $10.05 | $1 005,00 |
| 500 | $8.95 | $4 475,00 |
| 1 000 | $8.1 | $8 100,00 |
ADV7393WBCPZ-REEL Présentation
A video encoder (also called a video DAC or video digital-to-analog converter IC) is a semiconductor device that converts a digital video stream (parallel ITU-R BT.656, BT.1120, or similar) into an analog baseband waveform that legacy televisions, set-top boxes, automotive infotainment displays, and broadcast equipment can decode. The encoder sits downstream of a video decoder, scalar, or media processor and upstream of the physical analog connector or modulator, and belongs to the wider hierarchy: video encoder -> data converter IC -> mixed-signal semiconductor -> display pipeline IC. By consolidating the three DACs, sync insertion, and macrovision copy-protection on one die, the part replaces what historically required multiple discrete converters.
Key differentiating features include three 2.7 V/3.3 V 10-bit DACs operating up to 80 MHz (sufficient for 720p/1080i HD timings), 1.8 V or 3.3 V digital I/O to ease interfacing with modern application processors, integrated on-chip voltage reference, single 27 MHz crystal or clock input, and a 2-wire I2C-compatible control interface. The 40-lead LFCSP-WQ package with an exposed thermal pad keeps PCB real-estate modest while supporting up to -40 to +105 degC operation, while advanced power management reduces shutdown current to microamp levels for portable video applications.
Internally, the encoder uses a current-steering DAC architecture with proprietary dynamic element matching to maintain low spurious content and good differential linearity at HD data rates. A configurable input formatter accepts YCbCr 4:2:2 or 4:4:4 video and supports separate syncs, embedded syncs (SAV/EAV), and a 16/24-bit parallel host port. Host-side firmware configures output standard, pedestal, gamma, and color-bar test pattern through the I2C control port, removing the need for external glue logic.
Typical applications include set-top boxes, Blu-ray and DVD players, automotive infotainment rear-seat displays, video capture and editing cards, medical imaging preview outputs, and digital signage. The combination of SD and HD support on one IC, plus the small 6x6 mm footprint and -40 to +105 degC operating range, makes the part well suited to multi-standard platforms where a single hardware design must serve global SKUs.
When designing with this device, ensure the host processor supplies an ITU-R BT.656 or BT.1120 stream with proper EAV/SAV codes; the encoder auto-detects SD vs HD mode from the input line length, but the host must configure the output standard via I2C on power-up. The exposed thermal pad must be soldered to a continuous ground copper pour of at least 1 square inch to keep the die within safe junction temperature under sustained HD output operation.
Alternatives de remplacement direct pour ADV7393WBCPZ-REEL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ADV7393WBCPZ-REEL (même facteur de forme et même empreinte) — différant par Output Formats, Package, Number of DACs, Resolution, Control Interface.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ADV7393BCPZ-REEL
✅ Remplacement direct✓ En stock
$6.2 / unité
Voir la fiche technique →ADV7393WBCPZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADV7390BCPZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADV7391BCPZ
✅ Remplacement direct✓ En stock
$6.5 / unité
Voir la fiche technique →ADV7392BCPZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ADV7393WBCPZ-REEL Spécifications
| Product Type | Video Encoder IC (10-bit SD/HD) |
| Number of DACs | 3 (10-bit each) |
| Résolution | 10-bit |
| Video Standards | SD (NTSC/PAL), HD (720p/1080i) |
| Output Formats | Composite (CVBS), S-Video (Y-C), Component (YPrPb) |
| Digital I/O Supply Voltage | 1.8 V or 3.3 V |
| Analog/DAC Supply Voltage | 2.7 V / 3.3 V |
| Maximum DAC Sample Rate | 80 MHz |
| Host Interface | 8/16/24-bit parallel (ITU-R BT.656 / BT.1120) |
| Control Interface | I2C-compatible (2-wire serial) |
| Input Clock | 27 MHz crystal or external clock |
| Plage de température de fonctionnement | -40 C to +105 C |
| Boîtier | 40-pin LFCSP-WQ (6x6 mm) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de ADV7393WBCPZ-REEL
| Broche 1 | GND — Analog/digital common reference (also bonded to exposed pad) |
| Broche 2 | DAC1 — 10-bit video DAC output channel 1 (typically CVBS or Y) |
| Broche 3 | DAC2 — 10-bit video DAC output channel 2 (typically C or Pr) |
| Broche 4 | DAC3 — 10-bit video DAC output channel 3 (typically Pb or composite2) |
| Broche 5 | COMP — Compensation node for internal DAC reference amplifier |
| Broche 6 | RREF — External reference resistor (sets full-scale DAC current) |
| Broche 7 | VDD — 2.7 V/3.3 V analog supply (DACs, PLL, bias) |
| Broche 8 | GND — Analog ground |
| Broche 9 | VDD_IO — 1.8 V or 3.3 V digital I/O supply |
| Broche 10 | GND_IO — Digital I/O ground |
| Broche 11 | SCL — I2C-compatible serial clock input |
| Broche 12 | SDA — I2C-compatible serial data input/output |
| Broche 13 | ALSB — I2C address select (sets LSB of slave address) |
| Broche 14 | RESET — Hardware reset input (active low) |
| Broche 15 | CLK — 27 MHz reference clock input |
| Broche 16 | P0 — Pixel data input / general-purpose bit 0 |
| Broche 17 | P1 — Pixel data input / general-purpose bit 1 |
| Broche 18 | P2 — Pixel data input / general-purpose bit 2 |
| Broche 19 | P3 — Pixel data input / general-purpose bit 3 |
| Broche 20 | P4 — Pixel data input / general-purpose bit 4 |
| Broche 21 | P5 — Pixel data input / general-purpose bit 5 |
| Broche 22 | P6 — Pixel data input / general-purpose bit 6 |
| Broche 23 | P7 — Pixel data input / general-purpose bit 7 |
| Broche 24 | P8 — Pixel data input / general-purpose bit 8 |
| Broche 25 | P9 — Pixel data input / general-purpose bit 9 |
| Broche 26 | P10 — Pixel data input / general-purpose bit 10 |
| Broche 27 | P11 — Pixel data input / general-purpose bit 11 |
| Broche 28 | P12 — Pixel data input / general-purpose bit 12 |
| Broche 29 | P13 — Pixel data input / general-purpose bit 13 |
| Broche 30 | P14 — Pixel data input / general-purpose bit 14 |
| Broche 31 | P15 — Pixel data input / general-purpose bit 15 |
| Broche 32 | P16 — Pixel data input / general-purpose bit 16 |
| Broche 33 | P17 — Pixel data input / general-purpose bit 17 |
| Broche 34 | P18 — Pixel data input / general-purpose bit 18 |
| Broche 35 | P19 — Pixel data input / general-purpose bit 19 |
| Broche 36 | P20 — Pixel data input / general-purpose bit 20 |
| Broche 37 | P21 — Pixel data input / general-purpose bit 21 |
| Broche 38 | P22 — Pixel data input / general-purpose bit 22 |
| Broche 39 | P23 — Pixel data input / general-purpose bit 23 |
| Broche 40 | EPAD — Exposed thermal pad - must be soldered to ground copper pour |
Applications typiques
ADV7393WBCPZ-REEL convient pour 6 applications: Set-Top Box (STB) Analog Video Output, Automotive Infotainment Rear-Seat Display, Blu-ray / DVD Player Composite Output, Medical Imaging Preview / Diagnostic Display, Digital Signage and Kiosk Display Driver, Video Capture / Editing Card Output.
Set-Top Box (STB) Analog Video Output
The ADV7393WBCPZ-REEL is purpose-built for set-top box analog video output stages where composite (CVBS), S-Video (Y-C) and component (YPrPb) outputs must coexist on a single PCB. With three integrated 10-bit video DACs capable of composite, Y-C and YPrPb simultaneously, a host MPEG decoder such as the BCM7271 or Hi3716 feeds ITU-R BT.656 (SD) or BT.1120 (HD 720p/1080i) streams directly into the parallel host port, eliminating an external DAC bank. The 80 MHz DAC rate covers 1080i HD timings cleanly. The 2-wire I2C port lets the host MCU program output standard, NTSC vs PAL, and macrovision copy protection on power-up. Per the manufacturer datasheet, the LFCSP-WQ-40 takes only 6x6 mm on the video board, leaving room for HDMI and Ethernet ports.
Recommandé
Automotive Infotainment Rear-Seat Display
Rear-seat entertainment modules and automotive headrest displays often still require analog composite output to legacy displays. The ADV7393WBCPZ-REEL's WB temperature grade (-40 C to +105 C) and robust analog output drive make it automotive-infotainment qualified. Up to three analog outputs let designers serve a CVBS display, Y-C S-Video rear-seat panel, and YPrPb projection simultaneously from one encoder. The auto host processor connects via the 8/16/24-bit parallel host port with automotive MCU like the S912XET512J3MAG driving I2C control. The exposed thermal pad handles sustained HD operation in the +85 C cabin environment, while the integrated on-chip voltage reference simplifies BOM by removing an external reference IC.
Recommandé
Blu-ray / DVD Player Composite Output
Blu-ray and DVD players must still deliver analog composite (CVBS) and component outputs to older televisions that lack HDMI. The ADV7393WBCPZ-REEL directly accepts the H.264 or MPEG-2 decoded ITU-R BT.656 stream from a decoder such as the MT1389 or BCM7413 and presents CVBS, S-Video and YPrPb simultaneously without external glue. The 10-bit DAC resolution preserves the subtle luminance gradients critical for film content, while the integrated on-chip voltage reference eliminates temperature-drift errors that 8-bit external DACs introduce. Per the manufacturer's electrical characteristics, output drive supports a 75-ohm terminated load at 4.5 mA typical full-scale current. Designers integrate one I2C-control pin on the player mainboard for output-format selection.
Recommandé
Medical Imaging Preview / Diagnostic Display
Endoscopy and ultrasound imaging consoles often include an analog composite preview output for legacy review monitors that lack digital video inputs. The ADV7393WBCPZ-REEL converts the medical-imaging digital stream from the DSP or FPGA into CVBS plus Y-C for primary and secondary review displays. The 10-bit DAC resolution preserves grayscale steps vital for subtle lesion detection, while the differential current outputs reject common-mode noise coupled from high-current analog front-ends. Per the manufacturer datasheet, encoder latency is deterministic and frame-locked to the input stream, important for synchronized diagnostic-loop recording. I2C access is reserved for clinical test-pattern injection during field calibration.
Recommandé
Digital Signage and Kiosk Display Driver
Outdoor digital signage and kiosks frequently drive legacy analog CCTV or display monitors alongside modern HDMI panels. The ADV7393WBCPZ-REEL produces component (YPrPb) analog video to drive these older displays while sharing a single digital source with the modern HDMI path. With three 10-bit DACs the encoder can simultaneously output CVBS for a fallback monitor, Y-C for a recording deck, and YPrPb for the primary analog wall display. The -40 C to +105 C industrial temperature window covers outdoor kiosk deployments. Per Analog Devices' typical application circuit, the encoder can be placed on the same I2C bus as E2PROM, port expander, and clock generator for compact kiosk firmware stack.
Recommandé
Video Capture / Editing Card Output
Broadcast and prosumer video editing cards require analog-video output for tape mastering and legacy broadcast monitoring workflows. The ADV7393WBCPZ-REEL converts the project bus from editing software (PCIe capture or Thunderbolt host) into CVBS, S-Video, and YPrPb simultaneously for routing to mixers and recorders. The 80 MHz DAC rate supports 1080i mastering, while 10-bit resolution preserves post-grading subtleties. The host connects over the 8/16/24-bit parallel port for pixel-perfect ITU-R BT.1120 timing, and the I2C port allows software-driven test-pattern selection for broadcast fault-finding. Per the manufacturer reference design, the encoder sits downstream of a frame buffer such as a Spartan-6 FPGA and operates from a 27 MHz on-board oscillator.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADV7393WBCPZ-REEL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADV7393BCPZ-REEL | ADV7393WBCPZ | ADV7390BCPZ | ADV7391BCPZ | ADV7392BCPZ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | LFCSP-WQ-40 (6x6 mm) | LFCSP-WQ-40 (6x6 mm) - same | LFCSP-WQ-40 (6x6 mm) - same | LFCSP-WQ-40 (6x6 mm) - same | LFCSP-WQ-40 (6x6 mm) - same | LFCSP-WQ-40 (6x6 mm) - same |
| DAC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Video Standard Support | SD (NTSC/PAL) + HD (720p/1080i) | SD + HD (720p/1080i) | SD + HD (720p/1080i) | SD-only (no HD) | SD + HD (subset) | SD + HD with graphics enhancements |
| Number of DACs | 3 | 3 | 3 | 3 | 3 | 3 |
| Operating Temperature Range | -40 C to +105 C (WB grade) | 0 C to +70 C (B grade) | -40 C to +105 C (WB grade) | 0 C to +70 C (B grade) | 0 C to +70 C (B grade) | 0 C to +70 C (B grade) |
| Packaging Type | Tape & Reel (2,500/reel) | Tape & Reel (2,500/reel) | Tray | Tray | Tray | Tray |
| DAC Sample Rate (max) | 80 MHz | 80 MHz | 80 MHz | 27 MHz (SD only) | 80 MHz | 80 MHz |
| Lifecycle Status | Last Time Buy (NRND) | Last Time Buy (NRND) | Last Time Buy (NRND) | Last Time Buy (NRND) | Last Time Buy (NRND) | Last Time Buy (NRND) |
Principaux différenciateurs
- Wide operating temperature grade (-40 C to +105 C) (vs ADV7393BCPZ-REEL)
- Full SD + HD support (720p/1080i) at 80 MHz DAC rate (vs ADV7390BCPZ)
- 1.8 V or 3.3 V selectable digital I/O (vs ADV7393WBCPZ (tray-pack variant))
- Three integrated 10-bit DACs for simultaneous CVBS/Y-C/YPrPb (vs ADV7392BCPZ)
Notes de conception
The exposed thermal pad of the LFCSP-WQ-40 must be soldered to a continuous ground copper pour of at least 1 square inch (2.54 cm x 2.54 cm) with at least six thermal vias stitched at 0.5 mm pitch to inner ground planes. When driving three 75-ohm video outputs simultaneously at HD, internal dissipation is approximately 0.6 W; with the exposed pad treatment described, junction-to-ambient thermal resistance is reduced to roughly 35 C/W. Estimated: P = 3 x 4.5 mA x 1.4 V (typical operating point from datasheet), derate ambient to maintain Tj less than 125 C.
Always feed the encoder a digital video stream conforming to ITU-R BT.656 (SD) or BT.1120 (HD) with valid SAV/EAV codes embedded; the encoder auto-detects SD vs HD from line length but cannot recover from an invalid bit stream. The 27 MHz reference-clock input must be a low-jitter source (<50 ps RMS) to meet analog-output differential nonlinearity and signal-to-noise requirements; using a separate clock rather than deriving from an FPGA DCM avoids pattern-dependent jitter. Per the manufacturer datasheet, register 0x01 must be written after power-up to unlock the I2C registers.
Place analog output traces over a continuous ground plane, with 75-ohm characteristic impedance matching the cable. Use a pi-network (75 ohm series resistor, 75 ohm termination at the DAC output, and 100 ohm series at the connector) for each DAC line. Decouple VDD and VDD_IO separately with 0.1 uF X7R ceramics within 2 mm of each supply pin, plus a bulk 10 uF tantalum capacitor for each rail. Keep the COMP and RREF traces short (less than 5 mm total) to prevent noise pickup that would degrade DAC linearity.
Informations de conformité
RoHS compliant per Analog Devices product page; automotive-grade WB temperature range but not formally AEC-Q100 qualified (AEC-Q100 specifically qualified variants listed separately). Last-Time-Buy lifecycle effective from manufacturer announcement.
