AT90USB646-MU - 16MHz USB AVR MCU 64-QFN | Microchip
Référence : AT90USB646-MU ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
AT90USB646-MU Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one compact device. The AVR family belongs to the embedded-controller hierarchy: general-purpose MCU, embedded controller, processor, and semiconductor. AT90USB646-MU targets systems that need local control logic combined directly with USB connectivity, avoiding a separate USB interface controller when the firmware and host software support the AVR platform.
Verified product information identifies read-while-write ISP flash, 2 KB EEPROM, 4 KB SRAM, 48 I/O lines, 32 general-purpose working registers, a real-time counter, four flexible timer/counters, PWM, USART, and a byte-oriented two-wire serial interface. Its integrated USB controller supports low-speed and full-speed USB 2.0 operation. These resources make the MCU suitable for compact USB-connected control, data-acquisition, human-interface, bootloader, and embedded peripheral products.
The 16 MHz operating frequency provides the timing basis for the AVR core, while the 64 KB flash region stores firmware and 4 KB SRAM supports runtime data. Compared with a larger AVR controller, the AT90USB646 remains resource-focused, yet its 48 I/O lines and USB integration offer substantial peripheral connectivity. Designers must also account for the exposed-pad package, USB signal routing, decoupling, clock stability, and programming requirements.
Typical implementations include USB HID controllers, DFU-capable embedded products, USB-to-serial equipment, data loggers, keyboard and control-panel firmware, and small industrial or instrumentation modules. It is particularly useful when a compact, single-chip design needs both deterministic embedded processing and USB device connectivity.
PCB implementation requires a 64-QFN land pattern, adequate thermal copper, and short USB differential routing. The supplied data does not provide detailed operating-voltage limits, pin names, or thermal limits, so those values must be checked against the official manufacturer documentation before release to production.
This page consolidates the verified manufacturer and distributor information, clarifies the controller's core resources, and identifies practical selection considerations. Pricing and stock are intentionally not inferred because exact commercial values were not supplied; compare authorized distributor quotations and the official product page before procurement.
Alternatives de remplacement direct pour AT90USB646-MU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AT90USB646-MU (même facteur de forme et même empreinte) — différant par Package, Serial Interfaces.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
AT90USB646-16MU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AT90USB646-AU
✅ Remplacement direct✓ En stock
$8.1 / unité
Voir la fiche technique →AT90USB646-AUR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AT90USB646-16MU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AT90USB1286-16MUR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AT90USB646-MU Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit AVR RISC-based USB microcontroller |
| Fréquence d'horloge maximale | 16 MHz |
| Program Memory | 64 KB flash |
| Program Memory Organization | 64K x 8 bits |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| General-Purpose I/O | 48 lines |
| General-Purpose Working Registers | 32 registers |
| Timer/Counter Resources | 4 flexible timer/counters |
| USB Support | USB 2.0 low-speed and full-speed device |
| Serial Interfaces | USART and byte-oriented two-wire serial interface |
| Real-Time Counter | 1 real-time counter |
| PWM Support | Available through timer/counter compare modes |
| Boîtier | 64-QFN, 9 x 9 mm |
| Type de montage | Surface mount |
| Statut RoHS | unknown |
Guide de configuration des broches du AT90USB646-MU 64-qfn, 9 x 9 mm
Configuration des broches du AT90USB646-MU (boîtier 64-qfn, 9 x 9 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour AT90USB646-MU.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AT90USB646-MU convient pour 7 applications: USB HID Control Panels, USB Data Loggers, USB Bootloader Devices, USB Serial Adapters, USB-Connected Industrial Sensors, USB Audio or Interface Accessories, USB Connected Test Fixtures.
USB HID Control Panels
AT90USB646-MU fits a USB control panel that needs local button scanning, status indication, and host communication in one device. Its verified 48 I/O lines provide ample external signal capacity, while four flexible timer/counters with compare and PWM support can organize debounce timing, periodic status updates, and indicator behavior. The integrated USB 2.0 low-speed and full-speed device controller avoids a separate USB interface IC when the firmware and host protocol use the AVR platform. The design must still verify the exact HID endpoint requirements, power budget, connector implementation, and pin multiplexing against the official datasheet.
Recommandé
USB Data Loggers
AT90USB646-MU can act as the control MCU in a compact USB data logger because it combines 64 KB flash for firmware, 4 KB SRAM for runtime buffering, 2 KB EEPROM for calibration or configuration data, and USB low-speed/full-speed device support. Its 48 I/O lines can connect digital sensors, status signals, and storage-control signals, while the timer/counter resources support sampling windows and periodic transfers. The verified data does not specify an ADC or external memory interface, so analog acquisition or large-buffer requirements must be checked before selecting this MCU.
Recommandé
USB Bootloader Devices
AT90USB646-MU is suitable for a USB-connected embedded product that requires firmware storage and field-update capability. The verified 64 KB ISP flash provides a defined program-memory region, while USB device operation supports a direct host-to-device update path. The 2 KB EEPROM can retain product identity or configuration values, and the 4 KB SRAM can support boot-time buffers and protocol handling. Actual bootloader implementation depends on the official memory map, boot section, programming interface, security features, and USB descriptors, none of which are fully present in the supplied snippets.
Recommandé
USB Serial Adapters
AT90USB646-MU can implement a USB-to-serial bridge because the verified feature set includes USB low-speed and full-speed device operation plus a dedicated USART. Firmware can translate USB commands into serial traffic while the 48 I/O lines support control signals, status LEDs, or handshake lines. The 64 KB flash and 4 KB SRAM provide room for protocol buffering, while the two-wire interface adds another possible configuration or control path. A production design must confirm voltage levels, baud-rate requirements, ESD protection, connector selection, and whether the target host expects a particular USB class or driver.
Recommandé
USB-Connected Industrial Sensors
AT90USB646-MU is a reasonable base for a small USB-connected industrial sensor interface when the design uses digital sensing, control outputs, and status reporting. The 48 verified I/O lines can connect multiple discrete inputs and outputs, and the real-time counter plus four flexible timer/counters can support periodic sampling and output timing. USB full-speed device support provides a direct connection to a host, while USART and the two-wire interface can connect local peripherals. Industrial suitability, transient immunity, operating-temperature limits, and isolation must be verified separately because those values are not supplied.
Recommandé
USB Audio or Interface Accessories
AT90USB646-MU can serve as the USB-facing controller in an accessory that also needs independent timing or serial functions. The verified four timer/counters provide compare and PWM resources for indicators, sampling control, or actuator timing, while USART and the byte-oriented two-wire interface allow peripheral connectivity beyond USB. Its 64 KB flash and 4 KB SRAM are useful for protocol handling and buffering, but the device is not presented here as an audio codec or dedicated digital signal processor. Audio clocking, latency, codec interface, and signal-quality requirements therefore need separate component selection.
Recommandé
USB Connected Test Fixtures
AT90USB646-MU is suitable for a compact test fixture that enumerates over USB and drives a collection of digital test points. Its 48 I/O lines can connect fixture controls and status inputs, while the timer/counter resources support repeatable timing sequences and PWM-based stimulus where applicable. The two-wire interface and USART provide additional paths for local instrumentation. For production use, verify the fixture's voltage levels, input protection, USB power requirements, calibration storage strategy, and host software compatibility; the supplied verified data does not specify those implementation limits.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AT90USB646-MU — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AT90USB646-16MU | AT90USB646-AU | AT90USB646-AUR | AT90USB1286-16MUR |
|---|---|---|---|---|---|
| Package | 64-QFN 9 x 9 mm | 64-QFN 9 x 9 mm - family identity reported; exact package drawing not supplied | 64-QFN 9 x 9 mm - related ordering option | 64-QFN 9 x 9 mm - related ordering option | 64-QFN 9 x 9 mm - functional-equivalent listing |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Unit Price at Quantity 1 | Not provided | Not provided | Not provided | Not provided | Not provided |
Principaux différenciateurs
- USB integration with AVR control (vs ATMEGA8U2-MU)
- High I/O availability for compact embedded products (vs AT90USB646-16MU)
- Integrated connectivity beyond USB (vs AT90USB1286-16MUR)
Notes de conception
Use the exact Microchip package drawing for the 64-QFN 9 x 9 mm footprint, including exposed-pad geometry and thermal-via recommendations. USB differential routing should be short, symmetric, continuous over a suitable reference plane, and kept away from switching nodes and high-current return paths. Because the supplied data does not include numerical USB trace dimensions, use the official implementation guidance rather than values inferred from generic QFN examples.
Plan the power rails and decoupling around the official AT90USB646 datasheet before committing the PCB. Place required bypass capacitors at the corresponding supply pins with the shortest practical return path, and verify USB operating-current limits against the complete peripheral load. The verified data confirms the MCU and USB capability but does not provide input-voltage or current limits, so those values must be sourced from the manufacturer documentation.
Do not treat every AT90USB646 ordering suffix as automatically interchangeable. AT90USB646-16MU, AT90USB646-AU, AT90USB646-AUR, and AT90USB646-MU may differ in ordering, grade, or package details that are not visible in the collected snippets. Before substitution, compare the official ordering table, pinout, electrical limits, USB behavior, memory configuration, and package drawing. The present alternatives are provisional because verified web results do not prove complete drop-in equivalence.
Treat exposed-pad thermal management as a PCB-design requirement, not an afterthought. The supplied material confirms a 64-QFN package but gives no junction-temperature, thermal-resistance, or power-dissipation values. Use the official package information and the device's verified operating conditions to estimate worst-case dissipation, then provide copper spreading and vias appropriate to the enclosure and ambient temperature. Do not make thermal claims from unverified generic package assumptions.
Informations de conformité
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Verify these claims using the current Microchip product documentation and applicable manufacturer declarations.
