ATF16LV8C-10SI - 10ns 16V8 EECMOS PLD | Microchip Technology
Référence : ATF16LV8C-10SI ✗ Fin de vieATF16LV8C-10SI Présentation
An EECMOS PLD is a programmable logic device that stores its configuration in nonvolatile electrically erasable CMOS memory. The ATF16LV8C architecture is a superset of generic 16R8 devices and can implement many 20-pin combinatorial PLD functions. Eight outputs are allocated eight product terms each, while software-selected operating modes support a range of logic structures. This makes the device useful where a small microcontroller would add unnecessary cost and complexity.
The ATF16LV8C family supports speed grades down to 10 ns. The -10SI ordering code identifies the 10 ns speed grade in the industrial temperature range, with S indicating the SOIC package and I indicating industrial temperature grade. Typical 100 nA standby operation and the optional low-power mode help reduce system consumption when logic is not continuously required. The device also provides CMOS and TTL-compatible interfaces for mixed legacy and modern digital systems.
The ATF16LV8C-10SI is suitable for industrial control, interface decoding, address decoding, glue logic, control-signal generation, and compact peripheral interfacing. It is also appropriate for legacy product revisions where a programmable logic device is preferred over a fixed PAL or when field updates require nonvolatile configuration storage. The manufacturer describes the family as a high-performance EECMOS PLD using proven electrically erasable flash-memory technology.
Designers should verify the exact pin assignments, power-supply sequencing, programming interface, and timing constraints in the manufacturer datasheet before laying out a replacement board. The 20-pin SOIC footprint is suitable for conventional surface-mount assembly, but the device is obsolete according to the cross-reference information. For new production, confirm lifecycle status and consider a currently active programmable-logic platform.
This product summary combines the manufacturer product information, distributor package and speed details, and cross-reference observations to support engineering selection. It also distinguishes the ATF16LV8C-10SI from related speed, temperature, and packaging variants and records where technical data still requires direct manufacturer confirmation.
Alternatives de remplacement direct pour ATF16LV8C-10SI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATF16LV8C-10SI (même facteur de forme et même empreinte) — différant par Device Type, Package, Configuration Technology, Maximum Pin-to-Pin Delay, Product Terms per Output.
ATF16LV8C-10PI
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16LV8C-10JU
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16LV8C-10SU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATF16LV8C-15JC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16LV8C-15SC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16LV8C-10SI Valeurs maximales et caractéristiques électriques
| Device Type | 16V8 electrically erasable programmable logic device (EECMOS PLD) |
| Number of Macrocells | 8 macrocells |
| Maximum Pin-to-Pin Delay | 10 ns |
| Programmable Technology | EECMOS with electrically erasable flash-memory technology |
| Configuration de sortie | 8 outputs, each allocated 8 product terms |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Power-Down Mode | Pin-controlled, 5 uA maximum |
| Standby Current | 100 nA typical |
| Temperature Grade | Industrial |
| Boîtier | 20-pin SOIC |
| Type de montage | Surface mount |
| Nombre de broches | 20 pins |
| Programming | Software-programmable |
| Statut du cycle de vie | Obsolete |
Guide de configuration des broches du ATF16LV8C-10SI 20-pin soic
Configuration des broches du ATF16LV8C-10SI (boîtier 20-pin soic). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATF16LV8C-10SI.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATF16LV8C-10SI convient pour 6 applications: Industrial Control Signal Conditioning, Address and Peripheral Decoding, Legacy Interface Translation, Sequence and Interlock Control, Test and Measurement Fixtures, Legacy Product Maintenance.
Industrial Control Signal Conditioning
The ATF16LV8C-10SI suits legacy industrial control boards that require deterministic combinational logic without a microcontroller firmware loop. Eight configurable macrocells can implement interlocks, command decoding, limit comparisons, and signal transformations at a maximum pin-to-pin delay of 10 ns. Its electrically erasable configuration permits design updates without replacing the device. For an existing 20-pin SOIC layout, the package and pinout should be checked against the manufacturer datasheet before assembly, while obsolete lifecycle status requires controlled sourcing for repair production.
Recommandé
Address and Peripheral Decoding
A programmable logic device can simplify address decoding when several legacy peripherals share a microprocessor bus. The ATF16LV8C-10SI provides eight macrocells and eight product terms per output, allowing compact decode functions for chip selects, read and write strobes, or interrupt routing. Its 10 ns maximum pin-to-pin delay helps preserve timing margin in older systems. The device should be programmed for the exact bus protocol and checked for active levels, setup time, hold time, and power requirements before it is placed beside an embedded controller.
Recommandé
Legacy Interface Translation
The ATF16LV8C-10SI can implement interface translation and protocol assist logic between systems that use different control conventions. Its CMOS- and TTL-compatible inputs and outputs make it practical for bridging older digital signals, while the configurable macrocells can convert active-high and active-low controls, generate timing qualifiers, or isolate command paths. Because the device is obsolete, it is most appropriate for maintaining established equipment. Confirm the electrical limits and use the manufacturer pin table to avoid assigning signals outside the supported voltage or current range.
Recommandé
Sequence and Interlock Control
ATF16LV8C-10SI-based designs can implement deterministic interlocks for machinery, test systems, and automated fixtures where multiple permissive signals must be checked before an actuator is enabled. Eight outputs with programmable product terms support compact equations for start, stop, reset, and safety-interlock routing. The 10 ns speed grade handles fast combinational paths better than a 15 ns family member. Validate every permissive and fault path, including fail-safe behavior, power-up states, and single-fault analysis, because a programmed logic device does not automatically provide safety certification.
Recommandé
Test and Measurement Fixtures
The ATF16LV8C-10SI can consolidate fixture-control logic for relay selection, measurement routing, and instrument handshake signals. Nonvolatile EECMOS configuration allows repeatable behavior after power cycling, and the eight macrocells offer more flexibility than a fixed gate array when several fixture modes must be selected. A 10 ns maximum pin-to-pin delay is useful for short control loops, but actual timing margins depend on the external load and board topology. Confirm pinout, supply requirements, and programming support when repairing an existing fixture.
Recommandé
Legacy Product Maintenance
ATF16LV8C-10SI is particularly relevant to maintenance of established electronic products whose original schematics use a 20-pin 16V8 PLD. The nonvolatile EECMOS architecture stores the logic configuration and supports board-level replacement without redesigning the surrounding control electronics. A programmed equivalent may fit electrically, but firmware, pinout, package suffix, temperature grade, and timing must all be matched. Because lifecycle status is obsolete, use structured change control and preserve a known-good programmed configuration for each supported assembly.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATF16LV8C-10SI — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATF16LV8C-10PI | ATF16LV8C-10JU | ATF16LV8C-10SU | ATF16LV8C-15JC | ATF16LV8C-15SC |
|---|---|---|---|---|---|---|
| Package | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Programmable Logic Architecture | 16V8 EECMOS PLD | 16V8 EECMOS PLD | 16V8 EECMOS PLD | 16V8 EECMOS PLD | 16V8 EECMOS PLD | 16V8 EECMOS PLD |
| Number of Macrocells | 8 | 8 | 8 | 8 | 8 | 8 |
| Maximum Pin-to-Pin Delay | 10 ns | 10 ns | 10 ns | 10 ns | 15 ns | 15 ns |
| Programmable Technology | Electrically erasable CMOS | Electrically erasable CMOS | Electrically erasable CMOS | Electrically erasable CMOS | Electrically erasable CMOS | Electrically erasable CMOS |
| Input Logic Compatibility | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible |
| Power-Down Mode | Pin-controlled, 5 uA maximum | Pin-controlled, 5 uA maximum | Pin-controlled, 5 uA maximum | Pin-controlled, 5 uA maximum | Pin-controlled, 5 uA maximum | Pin-controlled, 5 uA maximum |
Principaux différenciateurs
- Faster maximum pin-to-pin delay within the same 16V8 architecture (vs ATF16LV8C-15JC)
- Same 10 ns timing class as the directly related -10 family variants (vs ATF16LV8C-10JU)
- Eight independently programmable macrocells for compact logic consolidation (vs ATF16LV8C-15SC)
Notes de conception
Do not treat every ATF16LV8C suffix as an automatic board-level replacement. Confirm the exact package drawing, lead width, pin numbering, temperature grade, speed grade, supply limits, and pinout in the manufacturer documentation. In particular, a 10 ns device may replace a 15 ns device only when the slower part meets the original timing requirement, while a faster device still requires the same voltage and logic-level compatibility.
Place the ATF16LV8C-10SI on the same 20-pin SOIC footprint used by the original assembly, with correct pin-1 orientation and adequate clearance around adjacent leads. Do not infer the complete signal map from generic 16V8 diagrams; assign nets from the exact manufacturer pin-description table. For rework, inspect the board for oxidation and confirm pin-1 polarity before applying heat, then verify continuity between the programmed device and surrounding logic.
Decouple the supply near the device and follow the manufacturer recommendations for bypass capacitance and routing. The family supports a pin-controlled low-power state, but the 5 uA value is a maximum power-down specification and does not describe active or standby current under every condition. Check the datasheet operating-current limits at the actual supply voltage and temperature before estimating battery life or power-up behavior.
Use the 10 ns maximum pin-to-pin delay as a timing parameter rather than a guaranteed margin for every implementation. Actual path delay depends on the programmed equation, device grade, supply, temperature, output loading, and board interconnect. For high fan-out or long routes, compare the complete timing budget with the original design and add buffering or a registered downstream stage when necessary.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact MPN. Confirm environmental and automotive qualifications directly with Microchip Technology before using the device in regulated applications.