Microchip Technology

ATF16LV8C-10SI - 10ns 16V8 EECMOS PLD | Microchip Technology

Teilenummer: ATF16LV8C-10SI ✗ Abgekündigt
100 nA typical Id 20-pin SOIC Package
MOQ: 1 |

ATF16LV8C-10SI Übersicht

The Microchip Technology ATF16LV8C-10SI is a 16V8 electrically erasable programmable logic device in a 20-pin SOIC package. It provides eight macrocells, 10 ns maximum pin-to-pin delay, CMOS- and TTL-compatible inputs and outputs, and a 5 uA maximum pin-controlled power-down mode. The device is based on electrically erasable CMOS technology and is intended for designs requiring compact, reconfigurable combinational logic.

An EECMOS PLD is a programmable logic device that stores its configuration in nonvolatile electrically erasable CMOS memory. The ATF16LV8C architecture is a superset of generic 16R8 devices and can implement many 20-pin combinatorial PLD functions. Eight outputs are allocated eight product terms each, while software-selected operating modes support a range of logic structures. This makes the device useful where a small microcontroller would add unnecessary cost and complexity.

The ATF16LV8C family supports speed grades down to 10 ns. The -10SI ordering code identifies the 10 ns speed grade in the industrial temperature range, with S indicating the SOIC package and I indicating industrial temperature grade. Typical 100 nA standby operation and the optional low-power mode help reduce system consumption when logic is not continuously required. The device also provides CMOS and TTL-compatible interfaces for mixed legacy and modern digital systems.

The ATF16LV8C-10SI is suitable for industrial control, interface decoding, address decoding, glue logic, control-signal generation, and compact peripheral interfacing. It is also appropriate for legacy product revisions where a programmable logic device is preferred over a fixed PAL or when field updates require nonvolatile configuration storage. The manufacturer describes the family as a high-performance EECMOS PLD using proven electrically erasable flash-memory technology.

Designers should verify the exact pin assignments, power-supply sequencing, programming interface, and timing constraints in the manufacturer datasheet before laying out a replacement board. The 20-pin SOIC footprint is suitable for conventional surface-mount assembly, but the device is obsolete according to the cross-reference information. For new production, confirm lifecycle status and consider a currently active programmable-logic platform.

This product summary combines the manufacturer product information, distributor package and speed details, and cross-reference observations to support engineering selection. It also distinguishes the ATF16LV8C-10SI from related speed, temperature, and packaging variants and records where technical data still requires direct manufacturer confirmation.

Drop-in-Alternativen für ATF16LV8C-10SI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ATF16LV8C-10SI (gleiche Bauform und Footprint) – abweichend in Device Type, Package, Configuration Technology, Maximum Pin-to-Pin Delay, Product Terms per Output.

Microchip Technology
Device Type: 16V8 programmable logic device (PLD)
Package: 20-pin PLCC, 9 mm x 9 mm
Configuration Technology: Electrically erasable CMOS flash memory
Vergleichen mit ATF16LV8C-10SI →
Microchip Technology
Device Type: 16V8 electrically erasable programmable logic device
Package: 20-SOIC, 0.295 in / 7.50 mm width
Configuration Technology: EECMOS with electrically erasable Flash memory
Vergleichen mit ATF16LV8C-10SI →

ATF16LV8C-10PI

✅ Drop-In
Microchip Technology
📦 20-SOIC
EECMOS erasable programmable logic device (EE PLD) · 16V8 with 8 macrocells · 10 ns · 8 · 8 · 8 · Electrically erasable flash memory · 3 modes selected automatically by software

Preis auf Anfrage

Datenblatt ansehen →

ATF16LV8C-10JU

✅ Drop-In
Microchip Technology
📦 20-SOIC
EECMOS erasable programmable logic device (SPLD) · 16V8 · 8 macrocells · 250 product terms · 10 ns · 3.0 V to 5.25 V · 5 uA · Electrically erasable flash memory based EECMOS

Preis auf Anfrage

Datenblatt ansehen →

ATF16LV8C-10SU

✅ Drop-In
📦 20-SOIC
Same 10 ns speed and 8-macrocell architecture; -10SU differs in suffix-defined package or temperature characteristics that require verification.

📋 Referenzalternative (nicht im Katalog)

ATF16LV8C-15JC

✅ Drop-In
Microchip Technology
📦 20-SOIC
16V8 programmable logic device (PLD) · EE PLD · Electrically erasable CMOS flash memory · 8 macrocells · 8 outputs · 8 product terms · 3 software-selected modes · 15 ns

Preis auf Anfrage

Datenblatt ansehen →

ATF16LV8C-15SC

✅ Drop-In
Microchip Technology
📦 20-SOIC
16V8 electrically erasable programmable logic device · EE PLD · EECMOS with electrically erasable Flash memory · 8 macrocells · 8 outputs · 8 product terms per output · 15 ns · 10 ns

Preis auf Anfrage

Datenblatt ansehen →

ATF16LV8C-10SI Grenzwerte & elektrische Eigenschaften

Device Type 16V8 electrically erasable programmable logic device (EECMOS PLD)
Number of Macrocells 8 macrocells
Maximum Pin-to-Pin Delay 10 ns
Programmable Technology EECMOS with electrically erasable flash-memory technology
Ausgangskonfiguration 8 outputs, each allocated 8 product terms
Input Compatibility CMOS and TTL compatible
Output Compatibility CMOS and TTL compatible
Power-Down Mode Pin-controlled, 5 uA maximum
Standby Current 100 nA typical
Temperature Grade Industrial
Gehäuse 20-pin SOIC
Montageart Surface mount
Pin-Anzahl 20 pins
Programming Software-programmable
Lebenszyklusstatus Obsolete

ATF16LV8C-10SI 20-pin soic Pinbelegungsleitfaden

Pinbelegung für ATF16LV8C-10SI (20-pin soic-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für ATF16LV8C-10SI im 20-pin soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ATF16LV8C-10SI.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ATF16LV8C-10SI ist geeignet für 6 Anwendungs: Industrial Control Signal Conditioning, Address and Peripheral Decoding, Legacy Interface Translation, Sequence and Interlock Control, Test and Measurement Fixtures, Legacy Product Maintenance.

🏭

Industrial Control Signal Conditioning

The ATF16LV8C-10SI suits legacy industrial control boards that require deterministic combinational logic without a microcontroller firmware loop. Eight configurable macrocells can implement interlocks, command decoding, limit comparisons, and signal transformations at a maximum pin-to-pin delay of 10 ns. Its electrically erasable configuration permits design updates without replacing the device. For an existing 20-pin SOIC layout, the package and pinout should be checked against the manufacturer datasheet before assembly, while obsolete lifecycle status requires controlled sourcing for repair production.

🖥️

Address and Peripheral Decoding

A programmable logic device can simplify address decoding when several legacy peripherals share a microprocessor bus. The ATF16LV8C-10SI provides eight macrocells and eight product terms per output, allowing compact decode functions for chip selects, read and write strobes, or interrupt routing. Its 10 ns maximum pin-to-pin delay helps preserve timing margin in older systems. The device should be programmed for the exact bus protocol and checked for active levels, setup time, hold time, and power requirements before it is placed beside an embedded controller.

🔧

Legacy Interface Translation

The ATF16LV8C-10SI can implement interface translation and protocol assist logic between systems that use different control conventions. Its CMOS- and TTL-compatible inputs and outputs make it practical for bridging older digital signals, while the configurable macrocells can convert active-high and active-low controls, generate timing qualifiers, or isolate command paths. Because the device is obsolete, it is most appropriate for maintaining established equipment. Confirm the electrical limits and use the manufacturer pin table to avoid assigning signals outside the supported voltage or current range.

🏭

Sequence and Interlock Control

ATF16LV8C-10SI-based designs can implement deterministic interlocks for machinery, test systems, and automated fixtures where multiple permissive signals must be checked before an actuator is enabled. Eight outputs with programmable product terms support compact equations for start, stop, reset, and safety-interlock routing. The 10 ns speed grade handles fast combinational paths better than a 15 ns family member. Validate every permissive and fault path, including fail-safe behavior, power-up states, and single-fault analysis, because a programmed logic device does not automatically provide safety certification.

🧪

Test and Measurement Fixtures

The ATF16LV8C-10SI can consolidate fixture-control logic for relay selection, measurement routing, and instrument handshake signals. Nonvolatile EECMOS configuration allows repeatable behavior after power cycling, and the eight macrocells offer more flexibility than a fixed gate array when several fixture modes must be selected. A 10 ns maximum pin-to-pin delay is useful for short control loops, but actual timing margins depend on the external load and board topology. Confirm pinout, supply requirements, and programming support when repairing an existing fixture.

🛠️

Legacy Product Maintenance

ATF16LV8C-10SI is particularly relevant to maintenance of established electronic products whose original schematics use a 20-pin 16V8 PLD. The nonvolatile EECMOS architecture stores the logic configuration and supports board-level replacement without redesigning the surrounding control electronics. A programmed equivalent may fit electrically, but firmware, pinout, package suffix, temperature grade, and timing must all be matched. Because lifecycle status is obsolete, use structured change control and preserve a known-good programmed configuration for each supported assembly.

What is ATF16LV8C-10SI?
The ATF16LV8C-10SI is a Microchip Technology 16V8 electrically erasable programmable logic device with eight macrocells, a 10 ns maximum pin-to-pin delay, and a 20-pin SOIC package. According to the ATF16LV8C manufacturer datasheet, its architecture emulates many 20-pin PALs and implements up to eight outputs with eight product terms per output. It is intended for compact, nonvolatile logic in legacy and industrial control designs.
What are the key specifications of ATF16LV8C-10SI?
The principal ATF16LV8C-10SI specifications are eight macrocells, 10 ns maximum pin-to-pin delay, CMOS- and TTL-compatible I/O, 5 uA maximum pin-controlled power-down current, and 20-pin SOIC packaging. The manufacturer identifies the device as an EECMOS PLD based on electrically erasable flash-memory technology. Its industrial temperature grade and obsolete lifecycle status should be considered together during any new design.
Where to download the ATF16LV8C-10SI datasheet PDF?
The ATF16LV8C-10SI datasheet PDF can be downloaded from the linked Microchip ATF16LV8C manufacturer documentation or the ATF16LV8C datasheet mirror listed in the data sources. The manufacturer document is the authoritative source for pinout, programming procedure, electrical characteristics, timing, and package drawings. The part-specific listing also provides a downloadable copy for engineers who need a direct reference.
Where can I find the ATF16LV8C-10SI pinout?
The ATF16LV8C-10SI pinout is shown in the pin-description and package drawings in the ATF16LV8C manufacturer datasheet. The device uses a 20-pin SOIC, but individual signal names are not reproduced here because the visible results do not provide the complete pin-description table. Use the datasheet pin table to map configuration, clock, power-down, and I/O functions before assigning PCB nets.
Is ATF16LV8C-10SI suitable for industrial applications?
The ATF16LV8C-10SI is identified as an industrial-temperature-grade variant, making it appropriate for many industrial equipment designs when the complete electrical limits remain valid for the intended ambient range. The -10 suffix denotes the 10 ns speed grade, S denotes the SOIC package, and I denotes industrial temperature grade. Its obsolete lifecycle status means new production should require an explicit availability and lifecycle review.
What is the difference between ATF16LV8C-10SI and ATF16LV8C-10PI?
The ATF16LV8C-10SI and ATF16LV8C-10PI are both 10 ns ATF16LV8C devices with eight macrocells and the same broad 3 V to 5.5 V input range, but their package and temperature ordering codes differ. Cross-reference data identifies -10PI as a tube-packaged variant and -10SI as the industrial SOIC ordering code. Confirm lead dimensions, temperature limits, and final assembly orientation before treating either part as a board-level replacement.
When should I choose ATF16LV8C-10SI over a microcontroller?
Choose the ATF16LV8C-10SI when the design requires fixed combinational or registered logic, nonvolatile configuration, fast deterministic propagation, and no firmware event loop. Its eight macrocells and 10 ns delay are suitable for decoding, interlocking, and signal conditioning, while the SOIC package simplifies assembly on legacy boards. Use a microcontroller when the logic needs substantial arithmetic, serial protocols, firmware updates, or frequent configuration changes.
What can replace ATF16LV8C-10SI?
The closest verified replacements are other ATF16LV8C speed, temperature, and package variants, including ATF16LV8C-10PI, ATF16LV8C-10JU, ATF16LV8C-10SU, and ATF16LV8C-15JC. Each must be checked for exact package dimensions, pinout, speed, temperature range, supply voltage, and programming compatibility before substitution. No verified cross-manufacturer pin-compatible equivalent was identified in the available cross-reference results.
Is ATF16LV8C-10SI the same as ATF16LV8C-10JU?
No. Both devices belong to the 10 ns ATF16LV8C family and use eight macrocells, but the suffix codes identify different package and temperature configurations. Cross-reference data lists ATF16LV8C-10JU as active and ATF16LV8C-10SI as obsolete. They are not automatically interchangeable; verify the manufacturer pin-description table, package drawing, operating-temperature range, and assembly orientation.
Where to buy ATF16LV8C-10SI online?
Use the Request a Quote form on this page to request ATF16LV8C-10SI availability, lot traceability, and shipment details. The part is listed in the verified distributor results and is identified as obsolete, so availability may depend on remaining factory or authorized inventory. The quote form is the appropriate route for confirming exact MPN, package condition, quantity, and lead time without relying on a stale listing status.
What is the price of ATF16LV8C-10SI?
Pricing for the ATF16LV8C-10SI should be requested through the Request a Quote form on this page because the device is obsolete and stock can change independently of the product page. No qualifying USD quantity-break table was captured for this exact MPN, so no unit price is stated. Include the required quantity, packaging condition, traceability needs, and target delivery date in the request.
What is the lead time for ATF16LV8C-10SI?
The lead time for ATF16LV8C-10SI must be confirmed through the Request a Quote form on this page. Because the ATF16LV8C-10SI is listed as obsolete, any available supply may be limited and lead time may depend on lot quantity and inspection requirements. The quote team should confirm factory-new versus surplus inventory, date codes, packaging, and delivery schedule before the order is committed.
Is ATF16LV8C-10SI in stock?
Stock status for ATF16LV8C-10SI should be confirmed through the Request a Quote form on this page. The verified distributor listing describes the device as an 8-macrocell, 10 ns, 20-SOIC PLD, while cross-reference information marks it obsolete. A listing alone does not guarantee current stock, so request a quantity-specific inventory confirmation and traceability details.
What is the best Microchip alternative to ATF16LV8C-10SI?
The best Microchip alternative depends on whether the exact 10 ns speed grade is required and whether the SOIC package must remain unchanged. ATF16LV8C-10JU is a verified 10 ns family variant listed as active, while ATF16LV8C-10PI, ATF16LV8C-10SU, and ATF16LV8C-15JC provide other documented family choices. The device with a different package suffix is not a true drop-in until its lead geometry and pin assignment are confirmed.
Does ATF16LV8C-10SI support low-power operation?
The ATF16LV8C-10SI supports a pin-controlled power-down mode with a maximum power-down current of 5 uA, and the manufacturer material lists typical standby current of 100 nA. These characteristics can reduce consumption when the associated logic does not need to remain active. The exact static and dynamic current conditions must be read from the electrical-characteristics table for the chosen supply voltage and temperature.
How does ATF16LV8C-10SI compare with ATF16LV8C-15JC?
The ATF16LV8C-10SI offers a 10 ns maximum pin-to-pin delay, while the ATF16LV8C-15JC is a 15 ns speed-grade variant. Both belong to the 16V8 EECMOS architecture with eight macrocells, but speed, package suffix, and possibly temperature or mounting details must be verified separately. The -10SI is preferable when 10 ns timing is required; the -15JC may be acceptable only where its documented timing and mechanical details satisfy the design.

Technische Referenzdaten für ATF16LV8C-10SI – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ATF16LV8C-10SI when maintaining a legacy 20-pin SOIC design that specifically requires the 10 ns ATF16LV8C speed grade and industrial-temperature ordering option. Its electrically erasable configuration, eight macrocells, and 10 ns maximum pin-to-pin delay suit compact decoding, interlocking, and control logic. Select ATF16LV8C-10JU when its package and temperature details match and lifecycle continuity is more important. Consider ATF16LV8C-10PI or ATF16LV8C-10SU only after verifying their suffix-specific package and temperature requirements. The ATF16LV8C-15JC and ATF16LV8C-15SC provide the same 16V8 macrocell architecture but increase maximum delay to 15 ns, so they are suitable only where timing remains adequate. Because the target and several alternatives are obsolete, new designs should compare an active PLD or CPLD platform rather than inheriting a supply-risk decision. Every mechanical and electrical substitution must be checked against the exact manufacturer pin table.

Vergleich mit Alternativen

Parameter Dieses Produkt ATF16LV8C-10PI ATF16LV8C-10JU ATF16LV8C-10SU ATF16LV8C-15JC ATF16LV8C-15SC
Package 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC 20-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Programmable Logic Architecture 16V8 EECMOS PLD 16V8 EECMOS PLD 16V8 EECMOS PLD 16V8 EECMOS PLD 16V8 EECMOS PLD 16V8 EECMOS PLD
Number of Macrocells 8 8 8 8 8 8
Maximum Pin-to-Pin Delay 10 ns 10 ns 10 ns 10 ns 15 ns 15 ns
Programmable Technology Electrically erasable CMOS Electrically erasable CMOS Electrically erasable CMOS Electrically erasable CMOS Electrically erasable CMOS Electrically erasable CMOS
Input Logic Compatibility CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible CMOS and TTL compatible
Power-Down Mode Pin-controlled, 5 uA maximum Pin-controlled, 5 uA maximum Pin-controlled, 5 uA maximum Pin-controlled, 5 uA maximum Pin-controlled, 5 uA maximum Pin-controlled, 5 uA maximum

Wichtigste Unterscheidungsmerkmale

  • Faster maximum pin-to-pin delay within the same 16V8 architecture (vs. ATF16LV8C-15JC)
  • Same 10 ns timing class as the directly related -10 family variants (vs. ATF16LV8C-10JU)
  • Eight independently programmable macrocells for compact logic consolidation (vs. ATF16LV8C-15SC)

Designhinweise

Do not treat every ATF16LV8C suffix as an automatic board-level replacement. Confirm the exact package drawing, lead width, pin numbering, temperature grade, speed grade, supply limits, and pinout in the manufacturer documentation. In particular, a 10 ns device may replace a 15 ns device only when the slower part meets the original timing requirement, while a faster device still requires the same voltage and logic-level compatibility.

Place the ATF16LV8C-10SI on the same 20-pin SOIC footprint used by the original assembly, with correct pin-1 orientation and adequate clearance around adjacent leads. Do not infer the complete signal map from generic 16V8 diagrams; assign nets from the exact manufacturer pin-description table. For rework, inspect the board for oxidation and confirm pin-1 polarity before applying heat, then verify continuity between the programmed device and surrounding logic.

Decouple the supply near the device and follow the manufacturer recommendations for bypass capacitance and routing. The family supports a pin-controlled low-power state, but the 5 uA value is a maximum power-down specification and does not describe active or standby current under every condition. Check the datasheet operating-current limits at the actual supply voltage and temperature before estimating battery life or power-up behavior.

Use the 10 ns maximum pin-to-pin delay as a timing parameter rather than a guaranteed margin for every implementation. Actual path delay depends on the programmed equation, device grade, supply, temperature, output loading, and board interconnect. For high fan-out or long routes, compare the complete timing budget with the original design and add buffering or a registered downstream stage when necessary.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact MPN. Confirm environmental and automotive qualifications directly with Microchip Technology before using the device in regulated applications.

Ähnliche Suchanfragen

ATF16LV8C-10SI datasheet ATF16LV8C-10SI datasheet pdf ATF16LV8C-10SI pinout ATF16LV8C-10SI equivalent ATF16LV8C-10SI replacement ATF16LV8C-10SI cross reference ATF16LV8C-10SI footprint ATF16LV8C-10SI price ATF16LV8C-10SI stock Microchip ATF16LV8C-10SI ATF16LV8C-10SI vs ATF16LV8C-10JU ATF16LV8C 20 SOIC programmable logic

Verwandte Bauteile & Begriffe

Microchip Technology ATF16LV8C-10SI ATF16LV8C ATF16LV8C-10PI ATF16LV8C-10JU ATF16LV8C-10SU ATF16LV8C-15JC ATF16LV8C-15SC programmable logic device PLD EECMOS electrically erasable flash-memory technology 16V8 architecture PAL combinational logic macrocell pin-to-pin delay CMOS TTL SOIC surface-mount package pin-controlled power-down standby current industrial control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen