ATF16V8BQL-15PC - 15ns Low-Power EEPLD | Microchip
Référence : ATF16V8BQL-15PC ✓ ActifATF16V8BQL-15PC Présentation
An electrically erasable programmable logic device, or EEPLD, is a user-programmable semiconductor that implements fixed logic functions through stored configuration data. The ATF16V8BQL belongs to the simple PLD hierarchy within programmable logic, offering a compact alternative to discrete gates, counter logic, and older bipolar PAL devices. Its electrically erasable Flash configuration allows the implemented logic to be reprogrammed without removing the IC from the circuit.
The ATF16V8BQL architecture supports up to 16 inputs, eight I/O pins, and eight product terms per output. Three operating modes are selected automatically by the programming software, allowing registered, combinatorial, and mixed combinational/registered logic in one device. Input Transition Detection circuitry monitors pin activity and automatically enters the low-power state when the device is idle, reducing consumption without requiring an external control signal.
With a specified 15 ns speed grade, the ATF16V8BQL-15PC is suitable for control, decoding, address translation, interface adaptation, and small state-machine implementations. Its 20-pin PDIP format also supports prototyping and through-hole assembly where surface-mount packages are undesirable. The electrically erasable configuration architecture provides faster board rework than fuse-programmed PAL devices while retaining a deterministic logic implementation after programming.
Typical uses include industrial control panels, programmable interface logic, counter and decoder circuits, data-routing networks, and compact embedded control systems. Engineers can implement the same board with different logic configurations by reprogramming the device, making it useful for product revisions, configurable control logic, and legacy equipment modernization. The low-power standby mode also benefits systems where most logic remains idle between external events.
During PCB design, preserve the ATF16V8BQL-15PC pin assignments and provide clean 5 V routing with adequate bypass capacitance. Because configuration determines the logical function of each I/O pin, validate the programmed equations and pin constraints against the manufacturer’s device pin-description table before releasing the layout or updating production firmware.
This product page combines the manufacturer’s device specifications, programming-oriented application guidance, verified package information, and same-footprint replacement analysis. It also highlights the distinction between the ATF16V8B and ATF16V8BQL low-power families so engineers can select the appropriate speed, package, and power characteristics for a design.
Alternatives de remplacement direct pour ATF16V8BQL-15PC — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATF16V8BQL-15PC (même facteur de forme et même empreinte) — différant par Device Type, Package, Maximum Inputs, I/O Count, Standby Current.
ATF16V8B-15PC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8BQL-15PU
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8B-15PU
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →ATF16V8BQ-15PU
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATF16V8B-10PC
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →ATF16V8BQL-15PC Valeurs maximales et caractéristiques électriques
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Programmable Logic Type | Simple Programmable Logic Device (SPLD) |
| Logic Gate Count | 250 gates |
| Macrocells | 8 macrocells |
| Maximum Inputs | 16 inputs |
| I/O Count | 8 I/O pins |
| Tension d'alimentation | 5 V |
| Propagation Delay | 15 ns |
| Maximum Pin-to-Pin Delay | 15 ns |
| Technology | CMOS electrically erasable Flash technology |
| Standby Current | 5 mA typical |
| Product Terms per Output | 8 product terms |
| Operating Modes | 3 automatically configured modes |
| Boîtier | 20-pin PDIP |
| Type de montage | Through-hole |
| Legacy Architecture Emulation | 16R8 family and most 20-pin combinatorial PLDs |
| Power-Down Feature | Automatic low-power mode through Input Transition Detection (ITD) |
Guide de configuration des broches du ATF16V8BQL-15PC 20-pin pdip
Configuration des broches du ATF16V8BQL-15PC (boîtier 20-pin pdip). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATF16V8BQL-15PC.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATF16V8BQL-15PC convient pour 6 applications: Industrial Control and Interlock Logic, Programmable Interface Adapters, Counter and Decoder Circuits, Embedded Equipment Controls, Configurable Data Routing Networks, Programmable Power and Peripheral Control.
Industrial Control and Interlock Logic
The ATF16V8BQL-15PC fits compact industrial control logic where a 16V8 architecture can implement interlocks, command decoding, alarm mapping, and state transitions. Its eight macrocells provide eight product terms per output, while up to 16 inputs support signals from switches, sensors, and machine controllers. The 15 ns speed grade is useful for general control paths, and the 5 V CMOS device can reduce hardware compared with multiple gate packages. The ATF16V8BQL family also enters low-power operation when Input Transition Detection indicates that the logic is idle. For an industrial panel, program the equations to combine permissive, stop, and reset conditions into each actuator command, then validate every signal against the pin-description table.
Recommandé
Programmable Interface Adapters
The ATF16V8BQL-15PC can bridge incompatible or legacy interfaces by combining data steering, signal qualification, and format conversion in one programmable logic device. With up to 16 inputs and eight configurable I/O pins, it is appropriate for translating parallel bus activity, isolating control lines, and generating compact handshake sequences. The eight product terms allocated to each output support compact equations, while three software-selected operating modes allow combinational, registered, or mixed behavior. A 15 ns propagation-delay class supports general interface timing rather than high-speed memory interfaces. In a legacy-to-modern adapter, route the old bus through the programmable inputs, register selected signals, and use the ATF16V8BQL low-power mode when the source device remains inactive.
Recommandé
Counter and Decoder Circuits
The ATF16V8BQL-15PC is well suited to counters, decoders, selectors, and compact finite-state control logic where eight macrocells are sufficient. Each output receives eight product terms, allowing one macrocell to implement a decoded state or registered transition function, while the remaining outputs can carry counter stages, enables, or status signals. The 15 ns speed grade gives adequate margin for many control and address-decoding paths. Because the device is electrically erasable, firmware can be revised to alter state transitions without replacing the IC. For a programmable sequencer, define the state equations, constrain the clock and output-enable functions according to the package pin map, and verify transition timing with the programmed-device configuration.
Recommandé
Embedded Equipment Controls
For embedded equipment and instrumentation, the ATF16V8BQL-15PC can implement panel decoding, mode control, watchdog interlocking, and actuator sequencing in a single 5 V device. Its 250-gate and eight-macrocell capacity is appropriate for small control functions that do not require a microcontroller. The through-hole 20-pin PDIP package is convenient for prototypes, legacy upgrades, and boards designed for manual assembly. The ATF16V8BQL family’s 5 mA typical standby current and automatic transition into low-power mode help control consumption during idle periods, although total system demand still depends on other logic. Use the manufacturer programming constraints to prevent pin conflicts and validate startup states before programming production hardware.
Recommandé
Configurable Data Routing Networks
The ATF16V8BQL-15PC can implement crossbars, mux/demux functions, data routers, and signal permutation tables when the routing pattern is fixed or updated through reprogramming. Sixteen available inputs and eight I/O positions provide sufficient connectivity for compact routing networks, and registered outputs can be used where a signal must be held after a control event. The 15 ns speed grade suits moderate-rate control and packet-routing paths rather than high-bandwidth serial links. Electrically erasable Flash technology makes the device useful for configurable I/O routing, product variants, and field-service updates. Design the equations around the permitted product-term allocation, and confirm output-enable behavior and timing during state changes using the programming tool’s simulation results.
Recommandé
Programmable Power and Peripheral Control
The ATF16V8BQL-15PC can provide peripheral sequencing, power-good combination, reset generation, and discrete enable logic around a larger control system. Eight macrocells and configurable I/O pins are sufficient for coordinating several peripheral controls, while the 16R8-compatible architecture can simplify replacement of older combinatorial PLDs. The 5 V supply and 15 ns timing class fit general industrial logic, and automatic low-power operation helps when the peripherals remain disabled. Use separate passive pull-up or pull-down resistors where a control line must retain a defined state during reset. The programming file should be treated as part of the firmware release process because the logical behavior of each I/O depends on the stored equations and device architecture.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATF16V8BQL-15PC — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATF16V8B-15PC | ATF16V8BQL-15PU | ATF16V8B-15PU | ATF16V8BQ-15PU | ATF16V8B-10PC |
|---|---|---|---|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP - same package | 20-pin PDIP - same package | 20-pin PDIP - same package | 20-pin PDIP - same package | 20-pin PDIP - same package |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Speed Grade | 15 ns | 15 ns - same | 15 ns - same | 15 ns - same | 15 ns - same | 10 ns - 5 ns faster |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Logic Gates | 250 gates | 250 gates | 250 gates | 250 gates | 250 gates | 250 gates |
| Low-Power Operation | Automatic low-power mode with Input Transition Detection; 5 mA typical standby | Standard ATF16V8B power behavior | Automatic low-power mode with Input Transition Detection | Standard ATF16V8B power behavior | Quarter-power ATF16V8BQ family behavior | Standard ATF16V8B power behavior |
| Programmable Architecture | 16V8 EEPLD with 8 product terms per output | 16V8 EEPLD | 16V8 EEPLD | 16V8 EEPLD | 16V8 EEPLD | 16V8 EEPLD |
| Configuration Technology | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash | Electrically erasable Flash |
Principaux différenciateurs
- Automatic idle power reduction (vs ATF16V8B-15PC)
- Same 15 ns speed and 20-pin PDIP footprint (vs ATF16V8BQL-15PU)
- Upgrade path with additional timing margin (vs ATF16V8B-10PC)
Notes de conception
Design the 5 V rail for the ATF16V8BQL-15PC and the connected logic, then place the device’s required bypass capacitor close to its supply and ground pins. Use the manufacturer electrical-characteristics table for the permitted supply range and input levels. The low-power family can enter its 5 mA typical standby state automatically, but that figure should not be treated as total system standby current because external pull resistors and connected devices continue to contribute.
Preserve the 20-pin PDIP footprint and use the manufacturer pin-description table when routing clock, input, output, output-enable, ground, and supply functions. The programmed architecture can constrain which pins may serve as inputs, outputs, or registers, so a mechanically identical replacement is not necessarily functionally interchangeable until the JEDEC-style programming constraints and pin assignments are compared.
Do not confuse speed grades, package codes, or power families when substituting this device. ATF16V8B-15PC and ATF16V8BQL-15PU are 15 ns PDIP options, ATF16V8B-10PC is faster, and the ATF16V8BQ family has different low-power characteristics. Verify the complete ordering code, programmed architecture, pin constraints, supply voltage, and output-enable requirements before approving a replacement.
Use Input Transition Detection behavior as part of the system timing plan. When external inputs remain static, the ATF16V8BQL can move into its low-power state; when an input changes, the device must become active again. Avoid placing long unprotected traces beside switching nodes, and account for clock and I/O rise times in the PCB layout. This is especially important when an external handshake changes faster than the programmed logic can respond.
Informations de conformité
The ATF16V8BQL family is an industrial programmable logic device; no automotive qualification applies. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.