Microchip Technology

ATF16V8BQL-15PC - 15ns Low-Power EEPLD | Microchip

MPN: ATF16V8BQL-15PC ✓ सक्रिय
5 V Vdss 5 mA typical Id 20-pin PDIP Package
न्यूनतम ऑर्डर मात्रा: 1 |

ATF16V8BQL-15PC अवलोकन

The Microchip Technology ATF16V8BQL-15PC is a 15 ns electrically erasable programmable logic device in a 20-pin PDIP package. It provides 250 logic gates, eight macrocells, up to 16 inputs, and eight configurable I/O outputs. Operating from a single 5 V supply, the device combines CMOS implementation with automatic low-power operation and 5 mA typical standby current.

An electrically erasable programmable logic device, or EEPLD, is a user-programmable semiconductor that implements fixed logic functions through stored configuration data. The ATF16V8BQL belongs to the simple PLD hierarchy within programmable logic, offering a compact alternative to discrete gates, counter logic, and older bipolar PAL devices. Its electrically erasable Flash configuration allows the implemented logic to be reprogrammed without removing the IC from the circuit.

The ATF16V8BQL architecture supports up to 16 inputs, eight I/O pins, and eight product terms per output. Three operating modes are selected automatically by the programming software, allowing registered, combinatorial, and mixed combinational/registered logic in one device. Input Transition Detection circuitry monitors pin activity and automatically enters the low-power state when the device is idle, reducing consumption without requiring an external control signal.

With a specified 15 ns speed grade, the ATF16V8BQL-15PC is suitable for control, decoding, address translation, interface adaptation, and small state-machine implementations. Its 20-pin PDIP format also supports prototyping and through-hole assembly where surface-mount packages are undesirable. The electrically erasable configuration architecture provides faster board rework than fuse-programmed PAL devices while retaining a deterministic logic implementation after programming.

Typical uses include industrial control panels, programmable interface logic, counter and decoder circuits, data-routing networks, and compact embedded control systems. Engineers can implement the same board with different logic configurations by reprogramming the device, making it useful for product revisions, configurable control logic, and legacy equipment modernization. The low-power standby mode also benefits systems where most logic remains idle between external events.

During PCB design, preserve the ATF16V8BQL-15PC pin assignments and provide clean 5 V routing with adequate bypass capacitance. Because configuration determines the logical function of each I/O pin, validate the programmed equations and pin constraints against the manufacturer’s device pin-description table before releasing the layout or updating production firmware.

This product page combines the manufacturer’s device specifications, programming-oriented application guidance, verified package information, and same-footprint replacement analysis. It also highlights the distinction between the ATF16V8B and ATF16V8BQL low-power families so engineers can select the appropriate speed, package, and power characteristics for a design.

के लिए ड्रॉप-इन विकल्प ATF16V8BQL-15PC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATF16V8BQL-15PC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Package, Maximum Inputs, I/O Count, Standby Current.

Microchip Technology
Maximum Inputs: Up to 16 inputs
I/O Count: 8 I/Os
इसके साथ तुलना करें ATF16V8BQL-15PC →
Microchip Technology
Device Type: 16V8 electrically erasable programmable logic device
Maximum Inputs: Up to 16 inputs
इसके साथ तुलना करें ATF16V8BQL-15PC →
Microchip Technology
Device Type: Electrically erasable programmable logic device
Maximum Inputs: Up to 16 inputs
I/O Count: 8 I/Os
इसके साथ तुलना करें ATF16V8BQL-15PC →
Microchip Technology
Device Type: Simple Programmable Logic Device (SPLD)
Package: 20-pin PDIP, 0.300 inch (7.62 mm) body width
Standby Current: 25 microamps
इसके साथ तुलना करें ATF16V8BQL-15PC →

ATF16V8B-15PC

✅ ड्रॉप-इन
Microchip Technology
📦 20-pin PDIP
Electrically erasable programmable logic device (EEPLD) · 250 gates · Up to 16 inputs · 8 I/Os · 8 macrocells · 15 ns · 7.5 ns · 5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF16V8BQL-15PU

✅ ड्रॉप-इन
Microchip Technology
📦 20-pin PDIP
Electrically erasable programmable logic device · Quarter and low-power CPLD · 250 gates · 8 macrocells · Up to 16 inputs · 8 I/Os · 8 product terms · 5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF16V8B-15PU

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 20-pin PDIP
16V8 electrically erasable programmable logic device · PAL-compatible 20-pin architecture · 8 macrocells · 250 gates · 15 ns · 5 V · Up to 16 inputs · 8 I/Os

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF16V8BQ-15PU

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 20-pin PDIP
Same 15 ns speed grade, 20-pin PDIP package, eight macrocells, and 16V8 architecture; quarter-power ATF16V8BQ family differs from the ATF16V8BQL low-power characteristics.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATF16V8B-10PC

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Atmel
📦 20-pin PDIP
संगत स्पेसिफिकेशन

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF16V8BQL-15PC Maximum Ratings और Electrical Characteristics

Device Type Electrically Erasable Programmable Logic Device (EEPLD)
Programmable Logic Type Simple Programmable Logic Device (SPLD)
Logic Gate Count 250 gates
Macrocells 8 macrocells
Maximum Inputs 16 inputs
I/O Count 8 I/O pins
सप्लाई वोल्टेज 5 V
Propagation Delay 15 ns
Maximum Pin-to-Pin Delay 15 ns
Technology CMOS electrically erasable Flash technology
Standby Current 5 mA typical
Product Terms per Output 8 product terms
Operating Modes 3 automatically configured modes
पैकेज 20-pin PDIP
माउंटिंग प्रकार Through-hole
Legacy Architecture Emulation 16R8 family and most 20-pin combinatorial PLDs
Power-Down Feature Automatic low-power mode through Input Transition Detection (ITD)

ATF16V8BQL-15PC 20-pin pdip पिन कॉन्फ़िगरेशन गाइड

ATF16V8BQL-15PC (20-pin pdip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATF16V8BQL-15PC के लिए 20-pin pdip पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATF16V8BQL-15PC.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATF16V8BQL-15PC के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control and Interlock Logic, Programmable Interface Adapters, Counter and Decoder Circuits, Embedded Equipment Controls, Configurable Data Routing Networks, Programmable Power and Peripheral Control.

🏭

Industrial Control and Interlock Logic

The ATF16V8BQL-15PC fits compact industrial control logic where a 16V8 architecture can implement interlocks, command decoding, alarm mapping, and state transitions. Its eight macrocells provide eight product terms per output, while up to 16 inputs support signals from switches, sensors, and machine controllers. The 15 ns speed grade is useful for general control paths, and the 5 V CMOS device can reduce hardware compared with multiple gate packages. The ATF16V8BQL family also enters low-power operation when Input Transition Detection indicates that the logic is idle. For an industrial panel, program the equations to combine permissive, stop, and reset conditions into each actuator command, then validate every signal against the pin-description table.

🔧

Programmable Interface Adapters

The ATF16V8BQL-15PC can bridge incompatible or legacy interfaces by combining data steering, signal qualification, and format conversion in one programmable logic device. With up to 16 inputs and eight configurable I/O pins, it is appropriate for translating parallel bus activity, isolating control lines, and generating compact handshake sequences. The eight product terms allocated to each output support compact equations, while three software-selected operating modes allow combinational, registered, or mixed behavior. A 15 ns propagation-delay class supports general interface timing rather than high-speed memory interfaces. In a legacy-to-modern adapter, route the old bus through the programmable inputs, register selected signals, and use the ATF16V8BQL low-power mode when the source device remains inactive.

⚡

Counter and Decoder Circuits

The ATF16V8BQL-15PC is well suited to counters, decoders, selectors, and compact finite-state control logic where eight macrocells are sufficient. Each output receives eight product terms, allowing one macrocell to implement a decoded state or registered transition function, while the remaining outputs can carry counter stages, enables, or status signals. The 15 ns speed grade gives adequate margin for many control and address-decoding paths. Because the device is electrically erasable, firmware can be revised to alter state transitions without replacing the IC. For a programmable sequencer, define the state equations, constrain the clock and output-enable functions according to the package pin map, and verify transition timing with the programmed-device configuration.

🖥️

Embedded Equipment Controls

For embedded equipment and instrumentation, the ATF16V8BQL-15PC can implement panel decoding, mode control, watchdog interlocking, and actuator sequencing in a single 5 V device. Its 250-gate and eight-macrocell capacity is appropriate for small control functions that do not require a microcontroller. The through-hole 20-pin PDIP package is convenient for prototypes, legacy upgrades, and boards designed for manual assembly. The ATF16V8BQL family’s 5 mA typical standby current and automatic transition into low-power mode help control consumption during idle periods, although total system demand still depends on other logic. Use the manufacturer programming constraints to prevent pin conflicts and validate startup states before programming production hardware.

🌐

Configurable Data Routing Networks

The ATF16V8BQL-15PC can implement crossbars, mux/demux functions, data routers, and signal permutation tables when the routing pattern is fixed or updated through reprogramming. Sixteen available inputs and eight I/O positions provide sufficient connectivity for compact routing networks, and registered outputs can be used where a signal must be held after a control event. The 15 ns speed grade suits moderate-rate control and packet-routing paths rather than high-bandwidth serial links. Electrically erasable Flash technology makes the device useful for configurable I/O routing, product variants, and field-service updates. Design the equations around the permitted product-term allocation, and confirm output-enable behavior and timing during state changes using the programming tool’s simulation results.

🔋

Programmable Power and Peripheral Control

The ATF16V8BQL-15PC can provide peripheral sequencing, power-good combination, reset generation, and discrete enable logic around a larger control system. Eight macrocells and configurable I/O pins are sufficient for coordinating several peripheral controls, while the 16R8-compatible architecture can simplify replacement of older combinatorial PLDs. The 5 V supply and 15 ns timing class fit general industrial logic, and automatic low-power operation helps when the peripherals remain disabled. Use separate passive pull-up or pull-down resistors where a control line must retain a defined state during reset. The programming file should be treated as part of the firmware release process because the logical behavior of each I/O depends on the stored equations and device architecture.

What is the ATF16V8BQL-15PC?
The ATF16V8BQL-15PC is a 5 V, 15 ns electrically erasable simple programmable logic device manufactured by Microchip Technology. It provides 250 logic gates, eight macrocells, up to 16 inputs, and eight I/O pins in a 20-pin PDIP package. According to the manufacturer datasheet, the device uses CMOS electrically erasable Flash technology and automatically enters a low-power state when its Input Transition Detection circuitry detects that it is idle.
What are the key specifications of ATF16V8BQL-15PC that engineers should know?
The key ATF16V8BQL-15PC specifications are a 5 V supply, 15 ns speed grade, 250 logic gates, eight macrocells, up to 16 inputs, eight I/O pins, and a 20-pin PDIP package. The manufacturer datasheet also identifies 5 mA typical standby current, eight product terms per output, three automatically selected operating modes, and automatic low-power operation through Input Transition Detection circuitry. These figures define the device’s logic capacity, timing, package, and power-management behavior.
Where can I download the ATF16V8BQL-15PC datasheet PDF?
The ATF16V8BQL-15PC datasheet PDF is available through the manufacturer’s Atmel-0364 device-family document and is linked from this page. It covers the ATF16V8B, ATF16V8BQ, and ATF16V8BQL families, including the 16V8 architecture, operating modes, electrical characteristics, package information, and programming architecture. Use the PDF pin-description and electrical-characteristics tables when assigning PCB signals, selecting termination, and checking timing.
Where can I find the ATF16V8BQL-15PC pinout?
The ATF16V8BQL-15PC pinout is defined in the pin-description table of the manufacturer’s ATF16V8B-family datasheet. The device uses a 20-pin PDIP package, with pin 1 identified by the standard package notch or dimple convention. Use that table for the exact input, output, clock, output-enable, ground, and supply assignments because I/O functions can be constrained by the programmed logic equations.
Can ATF16V8B-15PC replace the ATF16V8BQL-15PC?
Yes, the ATF16V8B-15PC can serve as a same-package, pin-compatible alternative for the ATF16V8BQL-15PC when the design can accept the difference between the standard and low-power families. Both use the 20-pin PDIP footprint and a 15 ns speed designation. The ATF16V8BQL provides automatic low-power operation and 5 mA typical standby current, so verify the power-state requirements before exchanging the two devices.
What can replace the ATF16V8BQL-15PC?
The ATF16V8BQL-15PC can be replaced by the ATF16V8B-15PC or ATF16V8BQL-15PU when the replacement remains a 20-pin PDIP device with acceptable timing and power behavior. The ATF16V8B-15PC offers the same 15 ns speed grade and pin count, while the ATF16V8BQL-15PU retains the low-power family but uses a different PDIP package code. Confirm the physical pin assignment, programmed architecture, supply requirements, and low-power behavior before substitution.
Is ATF16V8BQL-15PC suitable for low-power embedded control logic?
Yes, the ATF16V8BQL-15PC is suitable for low-power embedded control logic when the board operates from 5 V and can use automatic idle detection. The manufacturer datasheet identifies 5 mA typical standby current and Input Transition Detection circuitry that powers the device down into its low-power mode when no relevant input transition occurs. This makes it useful for supervisory, decoding, and interface functions that remain idle between infrequent system events.
When should I choose ATF16V8BQL-15PC over ATF16V8B-15PC?
Choose the ATF16V8BQL-15PC over the ATF16V8B-15PC when automatic idle detection and the low-power family behavior are important. Both devices provide a 15 ns speed grade and use a 20-pin PDIP package, but the ATF16V8BQL includes automatic low-power operation with 5 mA typical standby current. Choose the standard ATF16V8B only after confirming that its active and idle power behavior is acceptable for the complete system load.
What is the difference between ATF16V8BQL-15PC and ATF16V8BQL-15PU?
The ATF16V8BQL-15PC and ATF16V8BQL-15PU are both 15 ns low-power ATF16V8BQL-family devices in 20-pin PDIP-style packages. Their package codes identify different ordering configurations, and the available comparison information confirms that ATF16V8BQL-15PU is a PDIP20 Flash PLD. Before interchangeability, compare the exact package drawings, pin assignments, ordering codes, and programmed-device constraints in the manufacturer documentation.
Where to buy ATF16V8BQL-15PC online?
The ATF16V8BQL-15PC can be requested through the Request a Quote form on this page. The form is the appropriate channel for current stock confirmation, minimum order quantity, lead time, and an order against the exact 20-pin PDIP ordering code. Quote requests help avoid an accidental substitution with a different speed grade or package configuration, which is especially important for this programmable logic device.
What is the price of ATF16V8BQL-15PC?
Current ATF16V8BQL-15PC pricing is available through the Request a Quote form on this page. The request should specify the complete MPN, ATF16V8BQL-15PC, the 20-pin PDIP package, and the required quantity. This preserves an exact ordering-code request and allows current commercial terms, availability, and delivery information to be confirmed without relying on an outdated price.
What is the lead time for ATF16V8BQL-15PC?
The current lead time for ATF16V8BQL-15PC should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, programmed-device handling, and component availability, so provide the required quantity and target delivery date in the request. Include the exact 15 ns speed grade and 20-pin PDIP ordering code when requesting the quotation.
Is ATF16V8BQL-15PC in stock?
Use the Request a Quote form on this page to check current ATF16V8BQL-15PC stock and allocation status. The form should be submitted with the exact MPN and required quantity so the response reflects the correct 15 ns, 20-pin PDIP configuration. Avoid treating generic ATF16V8B family inventory as confirmation of the ATF16V8BQL-15PC ordering code.
How much logic can the ATF16V8BQL-15PC implement?
The ATF16V8BQL-15PC implements as many as 250 logic gates through eight macrocells. According to the manufacturer datasheet, the device supports up to 16 inputs and eight outputs, and each output is allocated eight product terms. Three operating modes are selected automatically by software, enabling combinational, registered, or mixed logic configurations while preserving the compact 20-pin PDIP footprint.
How does Input Transition Detection help the ATF16V8BQL-15PC?
Input Transition Detection allows the ATF16V8BQL-15PC to recognize when relevant device inputs stop changing and enter its low-power state automatically. The manufacturer datasheet identifies 5 mA typical standby current for the low-power ATF16V8BQL family. This behavior reduces the need for external power-management logic when the programmed function is largely idle between external events, although timing during mode transitions must be included in the system design.

के लिए इंजीनियरिंग संदर्भ डेटा ATF16V8BQL-15PC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ATF16V8BQL-15PC when a design needs a 15 ns, 5 V EEPLD in a 20-pin PDIP package and benefits from automatic low-power operation. It is a practical choice for industrial controls, legacy interface adaptation, compact counters, and programmable routing that fit within eight macrocells and the 16V8 architecture. Select ATF16V8B-15PC when the PCB and timing requirements match but automatic idle power reduction is unnecessary. ATF16V8BQL-15PU is the closest same-family alternative to evaluate when its ordering configuration fits the mechanical and purchasing requirements. ATF16V8BQ-15PU offers a related quarter-power family architecture, but its operating characteristics should be checked against the original design. ATF16V8B-10PC is appropriate when additional timing margin is more important than preserving the exact 15 ns grade. In every case, verify programming constraints and pin assignments rather than relying on package similarity alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATF16V8B-15PC ATF16V8BQL-15PU ATF16V8B-15PU ATF16V8BQ-15PU ATF16V8B-10PC
Package 20-pin PDIP 20-pin PDIP - same package 20-pin PDIP - same package 20-pin PDIP - same package 20-pin PDIP - same package 20-pin PDIP - same package
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Speed Grade 15 ns 15 ns - same 15 ns - same 15 ns - same 15 ns - same 10 ns - 5 ns faster
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells
Logic Gates 250 gates 250 gates 250 gates 250 gates 250 gates 250 gates
Low-Power Operation Automatic low-power mode with Input Transition Detection; 5 mA typical standby Standard ATF16V8B power behavior Automatic low-power mode with Input Transition Detection Standard ATF16V8B power behavior Quarter-power ATF16V8BQ family behavior Standard ATF16V8B power behavior
Programmable Architecture 16V8 EEPLD with 8 product terms per output 16V8 EEPLD 16V8 EEPLD 16V8 EEPLD 16V8 EEPLD 16V8 EEPLD
Configuration Technology Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash Electrically erasable Flash

मुख्य विशेषताएँ

  • Automatic idle power reduction (बनामATF16V8B-15PC)
  • Same 15 ns speed and 20-pin PDIP footprint (बनामATF16V8BQL-15PU)
  • Upgrade path with additional timing margin (बनामATF16V8B-10PC)

डिज़ाइन नोट्स

Design the 5 V rail for the ATF16V8BQL-15PC and the connected logic, then place the device’s required bypass capacitor close to its supply and ground pins. Use the manufacturer electrical-characteristics table for the permitted supply range and input levels. The low-power family can enter its 5 mA typical standby state automatically, but that figure should not be treated as total system standby current because external pull resistors and connected devices continue to contribute.

Preserve the 20-pin PDIP footprint and use the manufacturer pin-description table when routing clock, input, output, output-enable, ground, and supply functions. The programmed architecture can constrain which pins may serve as inputs, outputs, or registers, so a mechanically identical replacement is not necessarily functionally interchangeable until the JEDEC-style programming constraints and pin assignments are compared.

Do not confuse speed grades, package codes, or power families when substituting this device. ATF16V8B-15PC and ATF16V8BQL-15PU are 15 ns PDIP options, ATF16V8B-10PC is faster, and the ATF16V8BQ family has different low-power characteristics. Verify the complete ordering code, programmed architecture, pin constraints, supply voltage, and output-enable requirements before approving a replacement.

Use Input Transition Detection behavior as part of the system timing plan. When external inputs remain static, the ATF16V8BQL can move into its low-power state; when an input changes, the device must become active again. Avoid placing long unprotected traces beside switching nodes, and account for clock and I/O rise times in the PCB layout. This is especially important when an external handshake changes faster than the programmed logic can respond.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The ATF16V8BQL family is an industrial programmable logic device; no automotive qualification applies. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.

डेटा सत्यापन तिथि: 2026-11-11 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

atf16v8bql datasheet atf16v8bql 15pu datasheet atmel atf16v8bql ATF16V8BQL-15PC datasheet ATF16V8BQL-15PC datasheet pdf ATF16V8BQL-15PC pinout ATF16V8BQL-15PC equivalent ATF16V8BQL-15PC replacement ATF16V8BQL-15PC vs ATF16V8B-15PC ATF16V8BQL-15PC 20-pin PDIP ATF16V8BQL-15PC low power PLD ATF16V8BQL-15PC industrial control logic ATF16V8BQL-15PC price ATF16V8BQL-15PC stock Microchip ATF16V8BQL-15PC

संबंधित कंपोनेंट्स और शब्द

Microchip Technology Atmel ATF16V8BQL-15PC ATF16V8B-15PC ATF16V8BQL-15PU ATF16V8B-15PU ATF16V8BQ-15PU ATF16V8B-10PC electrically erasable programmable logic device EEPLD simple programmable logic device SPLD programmable logic CMOS Flash memory technology 16V8 architecture macrocell product term combinational logic registered logic Input Transition Detection ITD low-power mode 20-pin PDIP through-hole package industrial control logic interface adaptation programmable counter state machine 5 V power supply
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें