ATF16V8CZ-15JI - 15ns 5V EEPLD | Microchip Technology
Référence : ATF16V8CZ-15JI ✓ ActifATF16V8CZ-15JI Présentation
A simple programmable logic device, or SPLD, is a programmable-logic IC that combines configurable AND/OR logic structures with registered or combinational operating modes. In the broader semiconductor hierarchy, an SPLD is a programmable-logic device within the logic-IC family. The ATF16V8CZ architecture can emulate many 16R8 devices and most 20-pin combinatorial PLDs, making it useful for consolidating several gates, decoders, counters and control functions into one nonvolatile logic component.
The ATF16V8CZ architecture includes eight outputs, each allocated eight product terms, and supports three operating modes selected automatically by software. Key characteristics include a 5 V supply, CMOS- and TTL-compatible inputs and outputs, a 15 ns maximum speed grade, and low-power operation. The electrically erasable architecture supports in-circuit reprogramming, allowing logic changes without replacing the device or redesigning the surrounding board.
The device combines eight macrocells with as many as 16 dedicated inputs and eight configurable I/O paths. Its 250-gate capacity provides considerably more integration than a small discrete PAL implementation while requiring less design effort than an FPGA. The ATF16V8CZ family is especially appropriate for fixed-format glue logic, industrial control interfaces, decoding functions, bus arbitration, state sequencing and other designs where compact logic density, predictable timing and simple programming are priorities.
Typical uses include industrial automation, consumer electronics and automotive control logic. The -15JI suffix identifies the 15 ns speed grade with industrial temperature grading, while the J-lead 20-PLCC package supports surface-mount assembly where a leaded package is preferred over a fine-pitch quad flat package. It can also serve as a system-originated logic replacement when the original board requires a 20-pin PLCC footprint.
The principal design consideration is package and pin compatibility. A replacement must match the 20-PLCC footprint, supply voltage, macrocell count, input/output assignment and programming architecture. Confirm the complete pin description and configuration requirements against the manufacturer datasheet before modifying an existing PCB or transferring a programmed logic design.
This product page combines the ATF16V8CZ family architecture, verified package and timing characteristics, same-footprint alternatives, comparison parameters and practical replacement guidance. It is intended to help engineers identify the correct 20-PLCC EEPLD for new designs, legacy-board maintenance and controlled redesigns without assuming that every similarly named ATF16V8 variant is interchangeable.
Alternatives de remplacement direct pour ATF16V8CZ-15JI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATF16V8CZ-15JI (même facteur de forme et même empreinte) — différant par Package, Device Type, Maximum Pin-to-Pin Delay, Product Terms per Output, Architecture.
ATF16V8CZ-15JU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATF16V8CZ-15JC
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8C-10JI
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATF16V8C-7JI
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8B-15JU
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATF16V8CZ-15JI Valeurs maximales et caractéristiques électriques
| Device Type | Electrically erasable simple programmable logic device (EEPLD) |
| Tension d'alimentation | 5 V |
| Maximum Pin-to-Pin Delay | 15 ns |
| Logic Capacity | 250 gates |
| Macrocells | 8 macrocells |
| Maximum Inputs | 16 inputs |
| I/O Pins | 8 I/O pins |
| Product Terms per Output | 8 product terms per output |
| Architecture Compatibility | Direct replacement of 16R8-family and most 20-pin combinatorial PLD devices |
| Operating Modes | 3 software-configured operating modes |
| Programmable Technology | EECMOS electrically erasable CMOS |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Power Option | Zero-power configuration |
| Boîtier | 20-PLCC J-lead, 9 mm x 9 mm |
| Type de montage | Surface mount |
| Temperature Grading | Industrial grade |
Guide de configuration des broches du ATF16V8CZ-15JI 20-plcc j-lead, 9 mm x 9 mm
Configuration des broches du ATF16V8CZ-15JI (boîtier 20-plcc j-lead, 9 mm x 9 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATF16V8CZ-15JI.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATF16V8CZ-15JI convient pour 6 applications: Industrial Automation Control Logic, Bus Decoding and Address Selection, Automotive Electronic Control, Consumer Electronics Interface Logic, State Machine and Sequencer, Legacy PCB Repair and Modernization.
Industrial Automation Control Logic
The ATF16V8CZ-15JI is well suited to industrial automation because its eight macrocells and eight configurable I/O paths can consolidate decoding, interlocking and sequencing functions into a 20-PLCC device. The 15 ns propagation delay is appropriate for many machine-control and interface tasks, while industrial temperature grading supports harsher ambient conditions. Engineers can use the electrically erasable architecture to revise logic without replacing the PCB. Before deployment, confirm the manufacturer electrical limits, temperature range and programming configuration for the exact industrial suffix.
Recommandé
Bus Decoding and Address Selection
The ATF16V8CZ-15JI can implement address decoders, chip-select logic and bus arbitration using its eight macrocells and as many as 16 inputs. A 15 ns maximum delay supports conventional control paths while the eight product terms per output provide useful combinational density for each assigned function. The 20-PLCC J-lead package also suits legacy industrial PCBs that cannot accept a fine-pitch replacement. Verify input polarity, feedback paths and output-disable behavior against the pin-description table during schematic capture.
Recommandé
Automotive Electronic Control
The ATF16V8CZ-15JI can provide compact fixed-format logic in automotive electronic modules, including signal decoding, actuator sequencing and interface control. Its eight I/O paths, up to 16 inputs and 15 ns maximum delay provide enough resources for small state machines and glue logic without adopting an FPGA. Industrial temperature grading is a distinct requirement from automotive qualification, so confirm the exact grade, qualification status and environmental criteria for the vehicle program before production release.
Recommandé
Consumer Electronics Interface Logic
The ATF16V8CZ-15JI is useful for consumer-electronics designs that require compact programmable glue logic between an MCU and peripheral devices. Its eight macrocells can implement mode selection, signal conditioning, command decoding and status multiplexing, while the electrically erasable architecture allows firmware-driven configuration changes during development. The 20-PLCC package offers a practical leaded footprint for repair and assembly processes. Validate supply sequencing, CMOS input levels and output timing in the final product architecture.
Recommandé
State Machine and Sequencer
Eight configurable macrocells make the ATF16V8CZ-15JI a practical choice for compact state machines, stepper sequencers and protocol-control logic. The 15 ns delay supports moderately timed systems, and the device offers multiple operating modes for combining registered and combinational functions. Because programming determines macrocell behavior, engineers should model the required state transitions before layout and verify each feedback connection in the manufacturer pin table. The same device can also replace older 16R8-style logic when the footprint and architecture align.
Recommandé
Legacy PCB Repair and Modernization
The ATF16V8CZ-15JI is useful for maintaining or modernizing legacy boards built around the 20-PLCC ATF16V8 footprint. The ATF16V8CZ family can directly replace many 16R8-family and 20-pin combinatorial PLD implementations, reducing the need for a full board redesign. A same-speed ATF16V8CZ option provides the most conservative substitution, while the 10 ns and 7 ns grades offer additional timing margin in newly retimed systems. Confirm pin assignments, programming data, temperature grade and obsolete-part availability before approving a replacement.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATF16V8CZ-15JI — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATF16V8CZ-15JU | ATF16V8CZ-15JC | ATF16V8C-10JI | ATF16V8C-7JI | ATF16V8B-15JU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-PLCC (9x9), J-lead | 20-PLCC (9x9), J-lead - same | 20-PLCC (9x9), J-lead - same | 20-PLCC (9x9), J-lead - same | 20-PLCC (9x9), J-lead - same | 20-PLCC (9x9), J-lead - same |
| Device Type | 5 V EEPLD | 5 V EEPLD | 5 V EEPLD | 5 V high-performance EEPLD | 5 V high-performance EEPLD | 5 V EEPLD |
| Maximum Propagation Delay | 15 ns | 15 ns | 15 ns | 10 ns | 7 ns | 15 ns |
| Macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Maximum Inputs | 16 inputs | 16 inputs | 16 inputs | 16 inputs | 16 inputs | 16 inputs |
| I/O Paths | 8 I/O paths | 8 I/O paths | 8 I/O paths | 8 I/O paths | 8 I/O paths | 8 I/O paths |
Principaux différenciateurs
- Exact same-speed 20-PLCC replacement (vs ATF16V8CZ-15JU)
- Additional timing margin without changing the 20-PLCC footprint (vs ATF16V8C-10JI)
- Highest speed in the compared ATF16V8 options (vs ATF16V8C-7JI)
- Direct replacement relationship with common 20-pin logic (vs ATF16V8B-15JU)
Notes de conception
Treat the 20-PLCC footprint as a fixed mechanical commitment rather than a generic 20-pin socket. Preserve the manufacturer-standard pin-1 location and lead pitch, and verify plated-through-hole diameter, solder-mask clearance and annular ring against the package drawing. When replacing an existing device, compare every power, feedback, clock, input and I/O connection in the ATF16V8CZ pin-description table before applying power.
A matching package does not guarantee that every ATF16V8 suffix is functionally interchangeable. Check the programmed architecture, fuse map, feedback assignments, I/O direction and temperature suffix. The ATF16V8CZ-15JU provides the same 15 ns speed grade, while the ATF16V8C-10JI and ATF16V8C-7JI alter delay by 5 ns and 8 ns respectively. Validate any faster substitution against setup and hold requirements in the original design.
Design the supply rails and unused inputs according to the electrical requirements in the ATF16V8CZ manufacturer datasheet. Do not assume that a 5 V nominal supply is acceptable for every board without checking its allowed range and tolerance. Because the device supports low-power configurations, evaluate whether unused macrocells and I/O paths should be assigned to defined states rather than left floating, and confirm the programmed power-state behavior during power-up and power-down.
Review edge rates, output loading and transmission-line behavior when replacing the 15 ns device with a 7 ns or 10 ns family member. Faster transitions can increase ringing, simultaneous switching noise and sensitivity to board capacitance. On long routes or lightly loaded nets, add source-series damping only after checking the driver capability, and preserve adequate ground-return paths to prevent switching activity from coupling into adjacent analog or control signals.
Informations de conformité
The ATF16V8CZ product page identifies a green package, but separate RoHS, REACH, halogen-free and conflict-minerals declarations are not stated. Automotive qualification is not claimed for the ATF16V8CZ-15JI.