Microchip Technology

ATF16V8CZ-15JI - 15ns 5V EEPLD | Microchip Technology

MPN: ATF16V8CZ-15JI ✓ فعال
5 V Vdss 20-PLCC J-lead, 9 mm x 9 mm Package
حداقل سفارش: 1 |

ATF16V8CZ-15JI نمای کلی

Microchip Technology ATF16V8CZ-15JI is a 5 V electrically erasable programmable logic device with eight macrocells, eight I/O paths, support for up to 16 inputs and a 15 ns propagation delay in a 20-PLCC J-lead surface-mount package. It belongs to the ATF16V8CZ family of zero-power, high-performance EECMOS PLDs that provide 250 gates of programmable logic.

A simple programmable logic device, or SPLD, is a programmable-logic IC that combines configurable AND/OR logic structures with registered or combinational operating modes. In the broader semiconductor hierarchy, an SPLD is a programmable-logic device within the logic-IC family. The ATF16V8CZ architecture can emulate many 16R8 devices and most 20-pin combinatorial PLDs, making it useful for consolidating several gates, decoders, counters and control functions into one nonvolatile logic component.

The ATF16V8CZ architecture includes eight outputs, each allocated eight product terms, and supports three operating modes selected automatically by software. Key characteristics include a 5 V supply, CMOS- and TTL-compatible inputs and outputs, a 15 ns maximum speed grade, and low-power operation. The electrically erasable architecture supports in-circuit reprogramming, allowing logic changes without replacing the device or redesigning the surrounding board.

The device combines eight macrocells with as many as 16 dedicated inputs and eight configurable I/O paths. Its 250-gate capacity provides considerably more integration than a small discrete PAL implementation while requiring less design effort than an FPGA. The ATF16V8CZ family is especially appropriate for fixed-format glue logic, industrial control interfaces, decoding functions, bus arbitration, state sequencing and other designs where compact logic density, predictable timing and simple programming are priorities.

Typical uses include industrial automation, consumer electronics and automotive control logic. The -15JI suffix identifies the 15 ns speed grade with industrial temperature grading, while the J-lead 20-PLCC package supports surface-mount assembly where a leaded package is preferred over a fine-pitch quad flat package. It can also serve as a system-originated logic replacement when the original board requires a 20-pin PLCC footprint.

The principal design consideration is package and pin compatibility. A replacement must match the 20-PLCC footprint, supply voltage, macrocell count, input/output assignment and programming architecture. Confirm the complete pin description and configuration requirements against the manufacturer datasheet before modifying an existing PCB or transferring a programmed logic design.

This product page combines the ATF16V8CZ family architecture, verified package and timing characteristics, same-footprint alternatives, comparison parameters and practical replacement guidance. It is intended to help engineers identify the correct 20-PLCC EEPLD for new designs, legacy-board maintenance and controlled redesigns without assuming that every similarly named ATF16V8 variant is interchangeable.

جایگزین‌های drop-in برای ATF16V8CZ-15JI — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATF16V8CZ-15JI (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Device Type, Maximum Pin-to-Pin Delay, Product Terms per Output, Architecture.

Microchip Technology
Package: 20-pin PLCC, 9 x 9 mm
Maximum Pin-to-Pin Delay: 10 ns
Product Terms per Output: 8 product terms
مقایسه با ATF16V8CZ-15JI →
Microchip Technology
Package: 20-pin ceramic PLCC, 9 mm x 9 mm
Device Type: Electrically erasable simple programmable logic device (SPLD)
مقایسه با ATF16V8CZ-15JI →
Microchip Technology
Package: 20-pin PLCC (J-Lead), 9 mm × 9 mm
Device Type: 16V8 Simple Programmable Logic Device (SPLD)
Product Terms per Output: 8 product terms
مقایسه با ATF16V8CZ-15JI →
Microchip Technology
Package: 20-pin PLCC J-lead, 9 x 9 mm
Device Type: Electrically Erasable Programmable Logic Device (EEPLD)
Maximum Pin-to-Pin Delay: 12 ns
مقایسه با ATF16V8CZ-15JI →

ATF16V8CZ-15JU

✅ جایگزین مستقیم
📦 20-PLCC (9x9)
Same 15 ns delay, 5 V supply, eight macrocells and eight I/O paths; 0 ns speed difference, with the order codes distinguishing temperature-grade designations.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF16V8CZ-15JC

✅ جایگزین مستقیم
Microchip Technology
📦 20-PLCC (9x9)
Electrically Erasable Programmable Logic Device (EEPLD) · 16V8 · 250 gates · 8 macrocells · 16 inputs · 8 I/Os · 8 product terms · 5 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8C-10JI

✅ جایگزین مستقیم
📦 20-PLCC (9x9)
Maximum propagation delay improves from 15 ns to 10 ns, a 5 ns or approximately 33% reduction, while retaining the 5 V eight-macrocell family architecture.

📋 جایگزین مرجع (خارج از کاتالوگ)

ATF16V8C-7JI

✅ جایگزین مستقیم
Microchip Technology
📦 20-PLCC (9x9)
16V8 Simple Programmable Logic Device (SPLD) · EECMOS · Electrically Erasable Flash Memory · 8 macrocells · 8 outputs · 8 product terms · 7.5 ns · 5 ns maximum

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8B-15JU

✅ جایگزین مستقیم
Microchip Technology
📦 20-PLCC (9x9)
Electrically erasable simple programmable logic device (SPLD) · 5 V · 15 ns · 62 MHz · 250 gates · 8 macrocells · 16 inputs · 8 I/O pins

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ATF16V8CZ-15JI حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Electrically erasable simple programmable logic device (EEPLD)
ولتاژ تغذیه 5 V
Maximum Pin-to-Pin Delay 15 ns
Logic Capacity 250 gates
Macrocells 8 macrocells
Maximum Inputs 16 inputs
I/O Pins 8 I/O pins
Product Terms per Output 8 product terms per output
Architecture Compatibility Direct replacement of 16R8-family and most 20-pin combinatorial PLD devices
Operating Modes 3 software-configured operating modes
Programmable Technology EECMOS electrically erasable CMOS
Input Compatibility CMOS and TTL compatible
Output Compatibility CMOS and TTL compatible
Power Option Zero-power configuration
بسته‌بندی 20-PLCC J-lead, 9 mm x 9 mm
نوع نصب Surface mount
Temperature Grading Industrial grade

راهنمای پیکربندی پین ATF16V8CZ-15JI 20-plcc j-lead, 9 mm x 9 mm

پیکربندی پین برای ATF16V8CZ-15JI (پکیج 20-plcc j-lead, 9 mm x 9 mm). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 20-plcc j-lead, 9 mm x 9 mm برای ATF16V8CZ-15JI

داده پین‌آوت تفصیلی موجود نیست برای ATF16V8CZ-15JI.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ATF16V8CZ-15JI مناسب است برای 6 کاربردs: Industrial Automation Control Logic, Bus Decoding and Address Selection, Automotive Electronic Control, Consumer Electronics Interface Logic, State Machine and Sequencer, Legacy PCB Repair and Modernization.

🏭

Industrial Automation Control Logic

The ATF16V8CZ-15JI is well suited to industrial automation because its eight macrocells and eight configurable I/O paths can consolidate decoding, interlocking and sequencing functions into a 20-PLCC device. The 15 ns propagation delay is appropriate for many machine-control and interface tasks, while industrial temperature grading supports harsher ambient conditions. Engineers can use the electrically erasable architecture to revise logic without replacing the PCB. Before deployment, confirm the manufacturer electrical limits, temperature range and programming configuration for the exact industrial suffix.

🖥️

Bus Decoding and Address Selection

The ATF16V8CZ-15JI can implement address decoders, chip-select logic and bus arbitration using its eight macrocells and as many as 16 inputs. A 15 ns maximum delay supports conventional control paths while the eight product terms per output provide useful combinational density for each assigned function. The 20-PLCC J-lead package also suits legacy industrial PCBs that cannot accept a fine-pitch replacement. Verify input polarity, feedback paths and output-disable behavior against the pin-description table during schematic capture.

🚗

Automotive Electronic Control

The ATF16V8CZ-15JI can provide compact fixed-format logic in automotive electronic modules, including signal decoding, actuator sequencing and interface control. Its eight I/O paths, up to 16 inputs and 15 ns maximum delay provide enough resources for small state machines and glue logic without adopting an FPGA. Industrial temperature grading is a distinct requirement from automotive qualification, so confirm the exact grade, qualification status and environmental criteria for the vehicle program before production release.

📱

Consumer Electronics Interface Logic

The ATF16V8CZ-15JI is useful for consumer-electronics designs that require compact programmable glue logic between an MCU and peripheral devices. Its eight macrocells can implement mode selection, signal conditioning, command decoding and status multiplexing, while the electrically erasable architecture allows firmware-driven configuration changes during development. The 20-PLCC package offers a practical leaded footprint for repair and assembly processes. Validate supply sequencing, CMOS input levels and output timing in the final product architecture.

⚡

State Machine and Sequencer

Eight configurable macrocells make the ATF16V8CZ-15JI a practical choice for compact state machines, stepper sequencers and protocol-control logic. The 15 ns delay supports moderately timed systems, and the device offers multiple operating modes for combining registered and combinational functions. Because programming determines macrocell behavior, engineers should model the required state transitions before layout and verify each feedback connection in the manufacturer pin table. The same device can also replace older 16R8-style logic when the footprint and architecture align.

🔧

Legacy PCB Repair and Modernization

The ATF16V8CZ-15JI is useful for maintaining or modernizing legacy boards built around the 20-PLCC ATF16V8 footprint. The ATF16V8CZ family can directly replace many 16R8-family and 20-pin combinatorial PLD implementations, reducing the need for a full board redesign. A same-speed ATF16V8CZ option provides the most conservative substitution, while the 10 ns and 7 ns grades offer additional timing margin in newly retimed systems. Confirm pin assignments, programming data, temperature grade and obsolete-part availability before approving a replacement.

خلاصه محصولات پیشنهادی

ATF16V8CZ-15JU Same 15 ns ATF16V8CZ architecture with a different temperature-grade suffix استفاده‌شده در: Industrial Automation Control Logic, Automotive Electronic Control, Consumer Electronics Interface Logic, Legacy PCB Repair and Modernization ATF16V8C-10JI Pin-compatible ATF16V8 option for designs needing a 10 ns delay استفاده‌شده در: Industrial Automation Control Logic, Automotive Electronic Control, Legacy PCB Repair and Modernization ATF16V8CZ-15JC Microchip Technology استفاده‌شده در: Bus Decoding and Address Selection, State Machine and Sequencer ATF16V8B-15JU Microchip Technology استفاده‌شده در: Bus Decoding and Address Selection, State Machine and Sequencer ATF16V8C-7JI Microchip Technology استفاده‌شده در: Consumer Electronics Interface Logic, Legacy PCB Repair and Modernization
What is the ATF16V8CZ-15JI?
The ATF16V8CZ-15JI is a 5 V electrically erasable simple programmable logic device with eight macrocells, eight I/O pins, support for up to 16 inputs and a 15 ns maximum propagation delay. It is packaged in a 20-PLCC J-lead surface-mount package. According to the Microchip Technology ATF16V8CZ manufacturer datasheet, the architecture provides 250 gates and emulates many 16R8-family and 20-pin combinatorial PLD devices.
What are the key specifications of ATF16V8CZ-15JI that engineers should know?
The ATF16V8CZ-15JI combines a 5 V supply, 15 ns maximum pin-to-pin delay, eight macrocells and eight configurable I/O paths in a 20-PLCC package. Its 250-gate electrically erasable architecture supports three software-selected operating modes. The manufacturer datasheet also identifies CMOS- and TTL-compatible inputs and outputs. These characteristics place it between simple discrete PAL logic and larger FPGA-based designs.
Where can I download the ATF16V8CZ-15JI datasheet PDF?
Download the ATF16V8CZ family datasheet from the official Microchip Technology product page or use the manufacturer PDF linked on this page. The document describes the EECMOS architecture, operating modes, electrical characteristics, 20-PLCC pin assignments and programming considerations. The ATF16V8CZ-15JI uses the -15JI speed and temperature designation within that family, so always verify the ordering suffix and temperature grade before applying a limit.
Where can I find the ATF16V8CZ-15JI pinout?
The ATF16V8CZ-15JI pinout is found in the pin-description table of the Microchip Technology ATF16V8CZ manufacturer datasheet. The device uses a 20-PLCC J-lead package with eight configurable I/O paths and up to 16 inputs. Use the complete pin-description table when assigning PCB tracks, programming I/O modes and checking an existing board because power, clock, feedback and configuration assignments must all be considered.
Can ATF16V8CZ-15JU replace ATF16V8CZ-15JI?
The ATF16V8CZ-15JU can serve as a pin-compatible replacement for the ATF16V8CZ-15JI because both are 15 ns ATF16V8CZ devices in 20-PLCC packages with eight macrocells and eight I/O paths. The measurable speed difference is 0 ns, while the order codes distinguish their temperature-grade designations. Confirm the required ambient-temperature range and programmed-device compatibility before approving the substitution.
What is the best drop-in replacement for ATF16V8CZ-15JI?
The closest drop-in replacement is the ATF16V8CZ-15JU because it retains the same 15 ns speed, 5 V supply, eight-macrocell architecture, eight I/O paths and 20-PLCC footprint. The difference is the order-code temperature designation rather than a timing change. A replacement is suitable only after confirming the required temperature range, pin functions and whether an existing programmed configuration must be retained.
Are ATF16V8C-10JI and ATF16V8CZ-15JI interchangeable?
The ATF16V8C-10JI is a pin-compatible 20-PLCC EEPLD with a 10 ns maximum delay, making it 5 ns faster than the ATF16V8CZ-15JI. Both retain the 5 V, eight-macrocell and eight-I/O architecture. A faster device can create additional hold-time and output-transition concerns in older designs, so evaluate the board timing and existing program before treating it as a direct replacement.
What is the difference between ATF16V8CZ-15JI and ATF16V8C-7JI?
The ATF16V8C-7JI has a 7 ns maximum delay and is therefore 8 ns faster than the 15 ns ATF16V8CZ-15JI. Both belong to the ATF16V8 family and use the 20-PLCC J-lead footprint, but the different speed grades may change timing assumptions in a legacy design. Choose the faster grade for new designs with tighter timing needs; retain the 15 ns grade when preserving the original system timing is more important.
Is ATF16V8CZ-15JI suitable for industrial automation?
The ATF16V8CZ-15JI is suitable for industrial automation because it is offered with industrial temperature grading and provides eight macrocells, up to 16 inputs and eight I/O paths for compact control logic. Its 15 ns speed grade supports common decoding, sequencing and interface functions. The manufacturer datasheet remains the controlling reference for electrical limits, temperature ranges and power behavior.
What can replace ATF16V8CZ-15JI on a legacy PCB?
The ATF16V8CZ-15JU is the most direct legacy-board candidate because it matches the 15 ns speed grade and 20-PLCC footprint. The ATF16V8C-10JI and ATF16V8C-7JI are also pin-compatible family options, but their 10 ns and 7 ns delays are respectively 5 ns and 8 ns faster. Verify temperature grade, power pins, feedback assignments and programmed logic before replacing the original device.
When should I choose ATF16V8CZ-15JI over a faster ATF16V8 variant?
Choose the ATF16V8CZ-15JI when preserving a proven 15 ns timing design, industrial temperature behavior and 20-PLCC layout is more important than gaining additional speed. Faster family variants can shorten propagation delay by 5 ns or 8 ns, but that improvement does not always justify retiming an established design. Use the faster grade when new timing margins, routing or system-clock requirements demand it.
Where can I request a quote for ATF16V8CZ-15JI?
Use the Request a Quote form on this page to request current pricing, stock confirmation, minimum order quantity and lead time for the ATF16V8CZ-15JI. The structured listing does not contain an exact quantity-break price table for the -15JI suffix. Supply the required package, quantity and traceability requirements so the request can be matched to the correct industrial-grade 20-PLCC device.
What is the price of ATF16V8CZ-15JI?
Current ATF16V8CZ-15JI pricing is established through the Request a Quote form on this page. The available listing information does not provide an explicit quantity-break table for the exact -15JI suffix, so a numeric price cannot be stated reliably. Include the required order quantity and any date-code or traceability needs with the request for an accurate quotation.
What is the lead time for ATF16V8CZ-15JI?
The current lead time for ATF16V8CZ-15JI should be confirmed through the Request a Quote form on this page. Availability can vary with the exact suffix, package, order quantity and manufacturing schedule. A formal quotation can also confirm minimum order quantity, packing method, date-code requirements and whether the requested quantity can be supplied as one traceable lot.
Is ATF16V8CZ-15JI suitable for automotive and consumer electronics?
The ATF16V8CZ-15JI is an industrial-grade 5 V EEPLD and can serve as compact logic in industrial, consumer-electronics and automotive-related equipment when its electrical and temperature limits satisfy the end product. It has eight macrocells, eight I/O paths and a 15 ns delay. Automotive qualification, automotive temperature grade and application-specific reliability requirements must be confirmed separately rather than inferred from its industrial designation.

داده‌های مرجع مهندسی برای ATF16V8CZ-15JI — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ATF16V8CZ-15JI for a new industrial design that specifically requires the 15 ns speed grade, eight macrocells, eight I/O paths and a 20-PLCC J-lead footprint. The ATF16V8CZ-15JU is the most conservative same-speed replacement when the footprint and timing match and only the order-code temperature designation differs. Select the ATF16V8C-10JI when a new design benefits from a 5 ns reduction in propagation delay without requiring the 7 ns grade. Consider the ATF16V8C-7JI when maximum speed is valuable and the entire timing and signal-integrity budget has been reviewed. The ATF16V8B-15JU is useful when its architecture and programmed function are confirmed compatible with the intended logic. For every choice, verify temperature requirements, pin functions, programming data and electrical limits in the manufacturer datasheet rather than relying on package similarity alone.

مقایسه با جایگزین‌ها

پارامتر این محصول ATF16V8CZ-15JU ATF16V8CZ-15JC ATF16V8C-10JI ATF16V8C-7JI ATF16V8B-15JU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-PLCC (9x9), J-lead 20-PLCC (9x9), J-lead - same 20-PLCC (9x9), J-lead - same 20-PLCC (9x9), J-lead - same 20-PLCC (9x9), J-lead - same 20-PLCC (9x9), J-lead - same
Device Type 5 V EEPLD 5 V EEPLD 5 V EEPLD 5 V high-performance EEPLD 5 V high-performance EEPLD 5 V EEPLD
Maximum Propagation Delay 15 ns 15 ns 15 ns 10 ns 7 ns 15 ns
Macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells
Maximum Inputs 16 inputs 16 inputs 16 inputs 16 inputs 16 inputs 16 inputs
I/O Paths 8 I/O paths 8 I/O paths 8 I/O paths 8 I/O paths 8 I/O paths 8 I/O paths

تفاوت‌های کلیدی

  • Exact same-speed 20-PLCC replacement (در مقابلATF16V8CZ-15JU)
  • Additional timing margin without changing the 20-PLCC footprint (در مقابلATF16V8C-10JI)
  • Highest speed in the compared ATF16V8 options (در مقابلATF16V8C-7JI)
  • Direct replacement relationship with common 20-pin logic (در مقابلATF16V8B-15JU)

یادداشت‌های طراحی

Treat the 20-PLCC footprint as a fixed mechanical commitment rather than a generic 20-pin socket. Preserve the manufacturer-standard pin-1 location and lead pitch, and verify plated-through-hole diameter, solder-mask clearance and annular ring against the package drawing. When replacing an existing device, compare every power, feedback, clock, input and I/O connection in the ATF16V8CZ pin-description table before applying power.

A matching package does not guarantee that every ATF16V8 suffix is functionally interchangeable. Check the programmed architecture, fuse map, feedback assignments, I/O direction and temperature suffix. The ATF16V8CZ-15JU provides the same 15 ns speed grade, while the ATF16V8C-10JI and ATF16V8C-7JI alter delay by 5 ns and 8 ns respectively. Validate any faster substitution against setup and hold requirements in the original design.

Design the supply rails and unused inputs according to the electrical requirements in the ATF16V8CZ manufacturer datasheet. Do not assume that a 5 V nominal supply is acceptable for every board without checking its allowed range and tolerance. Because the device supports low-power configurations, evaluate whether unused macrocells and I/O paths should be assigned to defined states rather than left floating, and confirm the programmed power-state behavior during power-up and power-down.

Review edge rates, output loading and transmission-line behavior when replacing the 15 ns device with a 7 ns or 10 ns family member. Faster transitions can increase ringing, simultaneous switching noise and sensitivity to board capacitance. On long routes or lightly loaded nets, add source-series damping only after checking the driver capability, and preserve adequate ground-return paths to prevent switching activity from coupling into adjacent analog or control signals.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The ATF16V8CZ product page identifies a green package, but separate RoHS, REACH, halogen-free and conflict-minerals declarations are not stated. Automotive qualification is not claimed for the ATF16V8CZ-15JI.

تاریخ تأیید داده‌ها: 2026-11-11 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ATF16V8CZ-15JI datasheet ATF16V8CZ-15JI pinout ATF16V8CZ-15JI datasheet pdf ATF16V8CZ-15JI equivalent ATF16V8CZ-15JI replacement ATF16V8CZ-15JI cross reference ATF16V8CZ-15JI footprint ATF16V8CZ-15JI price ATF16V8CZ-15JI stock Microchip ATF16V8CZ-15JI ATF16V8CZ-15JI vs ATF16V8CZ-15JU ATF16V8CZ-15JI vs ATF16V8C-10JI 20 PLCC EEPLD pinout 15 ns 5V EEPLD ATF16V8CZ industrial automation logic

قطعات و اصطلاحات مرتبط

Microchip Technology ATF16V8CZ-15JI ATF16V8CZ-15JU ATF16V8CZ-15JC ATF16V8C-10JI ATF16V8C-7JI ATF16V8B-15JU EEPLD SPLD simple programmable logic device electrically erasable programmable logic device programmable-logic device logic IC CMOS TTL-compatible logic EECMOS 20-PLCC PLCC package family J-lead surface-mount package 8 macrocells 16 inputs 8 I/O paths 15 ns propagation delay industrial automation RoHS REACH
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ