Microchip Technology

ATF22LV10C-10PU - 10ns CMOS PLD with 10 Macrocells | Microchip

Référence : ATF22LV10C-10PU ✓ Actif
3.0 V to 5.5 V Vdss 10 µA typical Id 24-pin PDIP Package 10 ns Speed
MOQ : 1 |

ATF22LV10C-10PU Présentation

The Microchip Technology ATF22LV10C-10PU is a 10 ns electrically erasable CMOS programmable logic device with 10 macrocells and 10 registers, housed in a 24-pin PDIP package. It operates from 3.0 V to 5.5 V and provides 500 gates of programmable logic. A user-controlled power-down feature places the device in a typical 10 µA standby condition, allowing system power to be managed without sacrificing operating speed.

An electrically erasable programmable logic device, or EEPROM PLD, combines a fixed logic architecture with nonvolatile configuration memory. The ATF22LV10C belongs to the broader PAL-compatible programmable logic hierarchy, where product terms, macrocells, registers, and fixed input/output assignments implement sum-of-products control logic. Its electrically erasable flash memory permits the programmed configuration to be rewritten during design updates or manufacturing revisions.

The headline operating specifications are a 10 ns device speed, 10 macrocells, and a 3.0 V to 5.5 V supply range. The 500-gate implementation can consolidate multiple gates, decoded state machines, interface controls, and fixed Boolean functions into one programmable device. Its low-power shutdown characteristic is particularly useful when individual logic sections must remain inactive during portions of the operating cycle.

The ATF22LV10C architecture follows the JEDEC 22V10-style assignment described for the family. Input signals feed the programmable logic array, while ten dedicated registers support sequential functions and clocked control. A dedicated clock input and output-enable control support registered outputs and board-level bus arbitration. This makes the device suitable for both combinational decoding and finite-state-machine implementations where deterministic timing and predictable pin assignments are important.

Typical uses include industrial control, data-acquisition interfaces, peripheral control, address decoding, keypad scanning, traffic sequencing, and compact embedded control logic. The device is particularly appropriate when a legacy programmable-logic design requires several gates, registers, or state-machine functions but does not justify implementing the equivalent logic in a microcontroller or FPGA.

Before layout, use the manufacturer pin-description table to assign every signal and preserve the standard 24-pin footprint. Pay particular attention to clock, output-enable, supply, ground, dedicated inputs, and I/O pins. Confirm timing against the system clock and I/O loading rather than relying only on the nominal 10 ns speed rating.

This page combines the family-level electrical characteristics, exact-ordering-code distinctions, same-footprint alternatives, and practical implementation guidance needed to determine whether the ATF22LV10C-10PU can retain its programmed logic function without changing the PCB.

Alternatives de remplacement direct pour ATF22LV10C-10PU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

ATF22LV10C-10PC

✅ Remplacement direct
Microchip Technology
📦 24-pin PDIP
22V10 electrically erasable programmable logic device · 10-macrocell SPLD with 500 gates · 10 ns · 3.0 V to 5.5 V · 3.3 V · 10 · 500 · Electrically erasable flash memory

Contactez-nous pour le prix

Voir la fiche technique →

ATF22LV10C-10PI

✅ Remplacement direct
📦 24-pin PDIP
Speed differs by 0 ns at 10 ns, macrocell count differs by 0 at 10, and register count differs by 0 at 10; this ordering code is identified as the industrial-temperature option.

📋 Alternative de référence (hors catalogue)

ATF22LV10C-10PU Valeurs maximales et caractéristiques électriques

Device Type Electrically Erasable Programmable Logic Device
Product Family ATF22LV10C
Speed Grade 10 ns
Macrocells 10 macrocells
Registers 10 registers
Equivalent Gate Capacity 500 gates
Supply Voltage Range 3.0 V to 5.5 V
Programming Technology Electrically erasable flash memory
Power-Down Standby Current 10 µA typical
Logic Family CMOS
User I/O Count 10 pins
Device Pin Count 24 pins
Boîtier 24-pin PDIP
Type de montage Through-hole
Programmable Architecture PAL-compatible 22V10-style architecture

Guide de configuration des broches du ATF22LV10C-10PU 24-pin pdip

Configuration des broches du ATF22LV10C-10PU (boîtier 24-pin pdip). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 24-pin pdip pour le ATF22LV10C-10PU

Aucune donnée de brochage détaillée disponible pour ATF22LV10C-10PU.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ATF22LV10C-10PU convient pour 6 applications: Industrial State-Machine Control, Data-Acquisition Interface Control, Peripheral Address Decoding, Keypad and Human-Interface Control, Motor and Sequencer Logic, Legacy Control-System Consolidation.

🏭

Industrial State-Machine Control

The ATF22LV10C-10PU is well suited to compact sequential control because it provides 10 macrocells and 10 registers within a single 10 ns programmable-logic device. Its registered outputs can implement state transitions, interlocks, and sequencing without dividing the logic across multiple gate packages. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V system rails, while the 10 µA typical power-down current allows controllers to disable the logic during inactive periods. Use the manufacturer clock and output-enable assignments exactly as specified, and validate setup and hold timing against the actual system clock and I/O loading.

📡

Data-Acquisition Interface Control

ATF22LV10C-10PU can consolidate the address decoding, latch control, and status sequencing surrounding a data-acquisition system. Ten dedicated registers support clocked control functions, while the 10 ns speed grade provides margin for combinational decode paths and registered interface signals. The 500-gate capacity is useful for merging control logic that would otherwise occupy several discrete gate packages. Keep external analog and high-speed data paths physically separate, use short clock and output-enable routes, and verify setup timing against the converter and acquisition controller requirements before relying on the nominal propagation rating.

🔧

Peripheral Address Decoding

The ATF22LV10C-10PU can decode multiple peripheral addresses and generate qualified control strobes within a compact legacy logic design. Its 10 macrocells and 10 registers provide enough resources for bus decoding, register-latch behavior, and combinational qualification of several control signals. The 3.0 V to 5.5 V operating range permits use in mixed-voltage equipment when interface levels are compatible, and electrically erasable flash allows the decode map to be revised during production. Route clock and enable signals away from switching nodes, observe required output timing, and confirm unused pins according to the manufacturer's pin table.

📱

Keypad and Human-Interface Control

A 10 ns programmable logic device can handle keypad scanning, debounce control, display multiplexing, and keypad-to-system signal translation without a processor interrupt overhead. The ATF22LV10C-10PU's 10 registers allow scan-state and output-latch functions to share one programmable device, while its 500-gate capacity supports multiple Boolean decoding paths. The user-controlled power-down feature is helpful in portable or intermittently powered interfaces because the datasheet specifies 10 µA typical standby current. Validate scan timing, contact-bounce assumptions, and display update rates in the programmed equations rather than treating the nominal 10 ns rating as the complete system timing budget.

⚡

Motor and Sequencer Logic

The ATF22LV10C-10PU can implement deterministic step sequencing, direction decoding, limit-condition interlocks, and output qualification in compact motion-control equipment. Registered outputs help organize transitions into discrete states, while the 10 macrocells can combine the Boolean conditions needed for each transition. Because the device operates from 3.0 V to 5.5 V, it can sit beside a compatible 3.3 V controller, although motor-driver signals must remain within the device's specified I/O limits. Add protection appropriate to the external motor environment, isolate noisy power paths from clock traces, and verify every state and fault condition through simulation.

🖥️

Legacy Control-System Consolidation

ATF22LV10C-10PU is useful when replacing dispersed gates, flip-flops, and combinational logic in a legacy control board while retaining the established 24-pin PDIP footprint. Its 10 macrocells, 10 registers, and 500-gate capacity can consolidate several small logic functions, while the electrically erasable configuration supports design revisions without a separate programmable device. The 10 ns speed rating supports timing closure in many control paths, but engineers should compare the original device's propagation delay and output behavior against the ATF22LV10C datasheet. Preserve the standard clock, enable, input, and I/O assignments, and validate both active and power-down states.

What is the ATF22LV10C-10PU?
The ATF22LV10C-10PU is a 10 ns CMOS programmable logic device containing 10 macrocells, 10 registers, and 500 gates of programmable logic in a 24-pin PDIP package. According to the Microchip ATF22LV10C family datasheet, it uses electrically erasable flash memory, operates from 3.0 V to 5.5 V, and includes a user-controlled power-down mode with 10 µA typical standby current.
What are the key specifications of ATF22LV10C-10PU that engineers should know?
The ATF22LV10C-10PU combines a 10 ns speed grade with 10 macrocells, 10 registers, and 500 gates of logic in a 24-pin PDIP package. The Microchip ATF22LV10C datasheet identifies a 3.0 V to 5.5 V operating range, electrically erasable flash configuration memory, and a power-down mode rated at 10 µA typical standby current. These parameters place it in the low-voltage CMOS PLD class.
Where can I download the ATF22LV10C-10PU datasheet PDF?
The official ATF22LV10C-10PU datasheet PDF is available from Microchip at the document link in the ATF22LV10C family datasheet. The document covers the 22V10-compatible architecture, 10 macrocells, registered outputs, supply-voltage limits, power-down behavior, and ordering information. Use the pin-description table in that PDF when assigning the 24 package pins or checking legacy board layouts.
Where can I find the ATF22LV10C-10PU pinout?
Use the ATF22LV10C family pin-description table in the Microchip manufacturer datasheet to locate the ATF22LV10C-10PU pin assignments. The device follows the standard 22V10-style arrangement referenced for the family, including clock, input, I/O, output-enable, supply, and ground signals. The complete numbered pin list is not reproduced on this page, so the manufacturer table should remain the PCB-design reference.
What is the ATF22LV10C-10PU supply-voltage range?
The ATF22LV10C-10PU operates from 3.0 V to 5.5 V. The Microchip ATF22LV10C product page states that the family's speed ranges are specified over this voltage interval for industrial and commercial temperature ranges. Designers should maintain the datasheet's supply sequencing and decoupling requirements rather than treating 3.0 V and 5.5 V as unrestricted operating points.
What is the standby current of the ATF22LV10C-10PU?
The ATF22LV10C-10PU has a typical 10 µA standby current when its user-controlled power-down function is asserted. The Microchip ATF22LV10C datasheet describes this low-power CMOS behavior as a way to manage total system power while retaining operating speed when the device is enabled. Actual board consumption also includes input leakage, output loading, and surrounding circuitry.
What can replace the ATF22LV10C-10PU without changing the PCB?
The ATF22LV10C-10PC and ATF22LV10C-10PI are the closest same-package options because each uses a 24-pin PDIP configuration and retains the 10 ns, 10-macrocelle, 10-register device ratings. Selection still depends on the required commercial or industrial temperature grade and the programmed JEDEC pin assignment. Confirm the complete suffix, temperature range, and timing requirements before replacing the fitted device.
ATF22LV10C-10PU vs ATF22LV10C-10PC — which should I choose?
Both parts are listed with a 10 ns speed, 10 macrocells, 10 registers, and a 24-pin PDIP package, so their core programmable-logic resources align. The practical selection point is the ordering-code temperature grade: ATF22LV10C-10PI is identified as the industrial-temperature option, while ATF22LV10C-10PC is the standard commercial-temperature ordering code. Match the grade to the application's ambient requirements.
Is ATF22LV10C-10PU suitable for industrial control logic?
The ATF22LV10C-10PU is suitable when its exact operating-temperature grade satisfies the industrial system requirement. Microchip identifies ATF22LV10C-10PI as an industrial-temperature ordering option and states that the family supports 3.0 V to 5.5 V operation across industrial and commercial ranges. Use the -10PI variant when the required ambient range exceeds the -10PU grade.
When should I choose ATF22LV10C-10PU over a microcontroller?
Choose the ATF22LV10C-10PU when the design is a compact fixed-state control, decoder, interface, or Boolean-logic function that benefits from deterministic combinational or registered operation. Its 10 macrocells, 10 registers, and 500-gate capacity consolidate modest glue logic into one device. A microcontroller is preferable when the design requires extensive data processing, flexible firmware updates, complex serial protocols, or substantial memory.
What is the best Microchip drop-in replacement for ATF22LV10C-10PU?
The closest Microchip drop-in candidates are the ATF22LV10C-10PC and ATF22LV10C-10PI, both of which retain the 24-pin PDIP footprint, 10 ns speed, 10 macrocells, and 10 registers. No verified cross-brand part was established as a strictly pin-compatible replacement. Check the required temperature grade, programmed configuration, timing conditions, and package pinout before approving either substitution.
Can ATF22LV10C-10PI replace ATF22LV10C-10PU?
The ATF22LV10C-10PI can replace the ATF22LV10C-10PU when the board requires the industrial-temperature grade and the programmed logic remains unchanged. Both devices use a 24-pin PDIP package and share the same 10 ns, 10-macrocelle, and 10-register core ratings. The ATF22LV10C-10PI is the appropriate choice where the ATF22LV10C-10PU temperature grade would be insufficient.
Is there a drop-in equivalent from another manufacturer for ATF22LV10C-10PU?
No cross-brand drop-in equivalent was confirmed for the ATF22LV10C-10PU from the substitution results. Legacy 22V10 devices may have similar pin assignments or logical functions, but the cross-reference results also warn that internal characteristics or circuit structures can differ. A valid replacement must retain the 24-pin PDIP footprint, supply range, clock and output-enable behavior, macrocell resources, and timing margins.
Where can I buy ATF22LV10C-10PU and check its current price?
Use the Request a Quote form on this XAIPART page to request the current unit price, stock position, minimum order quantity, and lead time for the ATF22LV10C-10PU. The exact MPN and suffix are important because temperature-grade and ordering-code variants can use similar package descriptions but are not automatically interchangeable. The form avoids static pricing that can become outdated.
How long is the lead time for ATF22LV10C-10PU?
Request the current lead time through the Request a Quote form on this XAIPART page. Lead time can vary with the exact ordering code, required quantity, packaging format, and current factory or distribution status. When requesting a quotation, identify ATF22LV10C-10PU explicitly and state whether the design requires the commercial or industrial temperature grade.
Is ATF22LV10C-10PU in stock?
Check the Request a Quote form on this XAIPART page for the current ATF22LV10C-10PU stock position and an order response. Do not infer availability from the existence of a catalog listing or a similar ATF22LV10C ordering code. Include the exact MPN, quantity, and temperature-grade requirement in the request to obtain an actionable allocation response.

Données de référence d'ingénierie pour ATF22LV10C-10PU — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the ATF22LV10C-10PU for a compact, nonvolatile CMOS control-logic design that uses the standard 24-pin PDIP footprint, a 3.0 V to 5.5 V rail, and up to 10 macrocells with 10 registers. Select ATF22LV10C-10PC when its standard commercial temperature grade satisfies the equipment environment. Select ATF22LV10C-10PI when the industrial-temperature designation is required and the same package, speed, and logic resources are acceptable. Both are stronger candidates than legacy devices because the electrically erasable flash architecture supports configuration updates, while the 10 µA typical power-down mode assists standby power control. Reject substitutions that merely share the 22V10 function but differ in package, memory technology, timing, supply limits, enable behavior, or pin assignment. Before finalizing any replacement, confirm the exact suffix, ambient-temperature requirement, programmed logic, timing margin, and behavior during power transitions.

Comparaison avec les alternatives

Paramètre Ce produit ATF22LV10C-10PC ATF22LV10C-10PI
Package 24-pin PDIP 24-pin PDIP 24-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology
Device Type Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device Electrically Erasable Programmable Logic Device
Speed Grade 10 ns 10 ns 10 ns
Macrocells 10 macrocells 10 macrocells 10 macrocells
Registers 10 registers 10 registers 10 registers
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Power-Down Standby Current 10 µA typical 10 µA typical 10 µA typical
Programming Technology Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory

Principaux différenciateurs

  • Combines sequential and combinational resources in one low-voltage PLD (vs ATF22LV10C-10PC)
  • Supports low-power system control through user-controlled power-down (vs ATF22LV10C-10PI)
  • Maintains the established 24-pin PDIP control-logic footprint (vs ATF22LV10C-10PC)

Notes de conception

Treat the clock as a dedicated high-fidelity route. Keep it short, avoid branching it into unnecessary loads, and place any required termination according to the board's clock architecture. The nominal 10 ns speed is a device timing parameter rather than a guarantee for every external path, so setup time, hold time, propagation delay, output loading, and the receiving device's requirements must all be included in the timing analysis.

Preserve the manufacturer-standard 24-pin PDIP footprint when repairing or updating an existing board. Check clock, output-enable, dedicated inputs, I/O pins, VCC, and ground assignments against the ATF22LV10C pin-description table before programming. A mechanically similar 22V10 socketed device is not necessarily a drop-in substitute because memory technology, timing, power-down behavior, and some electrical characteristics can differ.

Operate the ATF22LV10C-10PU only within its documented 3.0 V to 5.5 V supply range. Place the required supply bypass capacitance close to the device's VCC and ground pins, and keep switching-node currents away from the PLD's supply path. The 10 µA typical standby current applies to the device's power-down condition; total board standby consumption must be calculated from external loads, pull resistors, and connected logic.

Do not treat -10PC, -10PI, and -10PU as unrestricted procurement aliases. Their ordering codes distinguish temperature grade, and the programmed configuration must also be compatible with the replacement. Before substitution, compare the complete suffix, operating-temperature requirements, pin assignment, programmed equations, clock configuration, output-enable behavior, and timing assumptions. In legacy systems, also test power-up, power-down, and unused-pin states.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The ATF22LV10C-10PU is a programmable logic IC and is not an AEC-Q100 automotive-qualified device. Environmental and finish compliance are not stated in the cited family documentation.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ATF22LV10C-10PU ATF22LV10C-10PU datasheet ATF22LV10C-10PU datasheet pdf ATF22LV10C-10PU pinout ATF22LV10C-10PU equivalent ATF22LV10C-10PU replacement ATF22LV10C-10PU cross reference ATF22LV10C-10PU footprint ATF22LV10C-10PU price ATF22LV10C-10PU stock Microchip ATF22LV10C-10PU ATF22LV10C-10PU vs ATF22LV10C-10PI ATF22LV10C 24 pin PDIP pinout ATF22LV10C power-down application

Composants & termes associés

Microchip Technology ATF22LV10C-10PU ATF22LV10C-10PC ATF22LV10C-10PI ATF22LV10C EEPROM PLD electrically erasable programmable logic device programmable logic device PAL-compatible PLD CMOS electrically erasable flash memory programmable logic array 10 ns speed grade 10 macrocells 10 registers 500 gates 3.0 V to 5.5 V 10 µA standby current user-controlled power-down JEDEC 22V10 pinout 24-pin PDIP PDIP package family through-hole surface-mount package hierarchy address decoding finite-state-machine control
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ