Microchip Technology

ATF22V10CQZ-20XU - 20ns 500-Gate EEPLD | Microchip Technology

Référence : ATF22V10CQZ-20XU ✓ Actif
5 V Vdss 24-pin TSSOP Package 20 ns Speed Electrically erasable flash memory Memory
MOQ : 1 |

ATF22V10CQZ-20XU Présentation

The Microchip Technology ATF22V10CQZ-20XU is a 20 ns electrically erasable programmable logic device with 500 logic gates and 10 macrocells, packaged in a 24-pin TSSOP. It operates from a 5 V supply and combines CMOS programmable logic with electrically erasable flash memory for in-circuit reprogramming. The ATF22V10 family supports speeds down to 12 ns and offers zero standby power dissipation.

An EEPLD is an electrically erasable programmable logic device, a member of the simple programmable logic device family within programmable logic devices and integrated logic semiconductors. Unlike a mask-programmed PLD, it retains its programmed configuration in nonvolatile flash memory. This allows firmware or control logic to be updated without replacing the device, making the ATF22V10CQZ suitable for small amounts of glue logic, decoder, control, and state-machine functions.

Key features include 10 macrocells, approximately 500 gates, a 20 ns device speed grade, a 24-pin TSSOP surface-mount package, and a 5 V operating supply. Electrically erasable flash technology supports reconfiguration, while the zero standby power dissipation listed for the ATF22V10 family helps limit inactive-state consumption. These characteristics make the device useful when a fixed PLD would be inflexible but a larger FPGA or microcontroller would be unnecessary.

The ATF22V10 architecture is intended for compact logic decoding and control functions. Its macrocell-based organization provides a practical implementation of sum-of-products Boolean equations, registered outputs where supported, and configurable input/output behavior. The manufacturer specifies the family across multiple speed ranges, including operation down to 12 ns, with zero standby power dissipation. The -20 suffix identifies the 20 ns speed grade used in the ATF22V10CQZ-20XU ordering code.

Typical applications include legacy industrial control, address decoding, interface control, glue logic, and compact peripheral logic that benefits from nonvolatile reprogrammability. It can also support small state machines where the required logic density is below the practical scale of an FPGA or microcontroller. The TSSOP package allows direct placement on a conventional surface-mount PCB while accommodating a moderate number of input and output pins.

Designers should compare the 20 ns speed grade against the required propagation timing and external circuit delays. The 5 V supply must be regulated within the device operating limits, and unused inputs should be handled according to the manufacturer pin-description and design-check guidance. Programming should be performed with a compatible programmer and the manufacturer’s recommended electrical and timing procedures.

This product page consolidates the device architecture, package details, verified ordering information, replacement considerations, and practical selection guidance. It also distinguishes exact-package alternatives from broader functional options so engineers can determine whether a board can be updated without layout changes or requires a redesigned footprint and logic architecture.

Alternatives de remplacement direct pour ATF22V10CQZ-20XU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

ATF22V10CQZ-20XC

✅ Remplacement direct
Microchip Technology
📦 24-pin TSSOP
Electrically Erasable Programmable Logic Device · 22V10-compatible architecture · 10 macrocells · 10 outputs · 8 to 16 product terms · 20 ns · 12 ns · 5 V

Contactez-nous pour le prix

Voir la fiche technique →

ATF22V10CQZ-20XU Valeurs maximales et caractéristiques électriques

Device Type Electrically Erasable Programmable Logic Device (EEPLD)
Programmable Logic Family ATF22V10
Logic Gate Count 500 gates
Macrocells 10 macrocells
Device Speed Grade 20 ns
Family Minimum Speed 12 ns
Tension d'alimentation 5 V
Standby Power Dissipation 0 W
Programmable Memory Technology Electrically erasable flash memory
Process Technology CMOS
Boîtier 24-pin TSSOP
Package Type TSSOP surface-mount package
Total Pins 24 pins
Statut RoHS RoHS Compliant
Shipping Package Tube

Guide de configuration des broches du ATF22V10CQZ-20XU tube

Configuration des broches du ATF22V10CQZ-20XU (boîtier tube). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier tube pour le ATF22V10CQZ-20XU

Aucune donnée de brochage détaillée disponible pour ATF22V10CQZ-20XU.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ATF22V10CQZ-20XU convient pour 6 applications: Industrial Address Decoding, Peripheral Control Glue Logic, Legacy Interface Signal Conditioning, Embedded State-Machine Control, Programmable Test and Measurement Control, Configuration and Power Sequencing Logic.

🏭

Industrial Address Decoding

The ATF22V10CQZ-20XU fits compact industrial address-decoder logic when the required Boolean function remains within its 10 macrocells and 500-gate capacity. The 20 ns grade gives the design a defined timing target, while the 5 V supply and electrically erasable flash configuration simplify updates to fixed control sequences. Place the device in the 24-pin TSSOP footprint, connect the required address inputs, and route decoded outputs to the controlled subsystem. The principal design consideration is verifying the complete board and peripheral timing rather than relying on the device grade alone; external logic, interconnect, and skew must fit within the system budget. Nonvolatile reprogramming is particularly useful when addressing is maintained across multiple product variants, because the control table can be changed without replacing the IC.

🔧

Peripheral Control Glue Logic

ATF22V10CQZ-20XU is appropriate for peripheral-control glue logic that combines command decoding, timing qualification, and a small number of registered outputs. Its 10 macrocells provide more structured logic capacity than a basic combinational gate implementation, while the ATF22V10 family’s electrically erasable flash allows control equations to be revised during commissioning. Use the 20 ns grade to establish an initial timing budget for the 5 V interface and verify every path against the peripheral’s input limits. The 24-pin TSSOP package supports conventional surface-mount assembly, but all 24 positions must be assigned according to the manufacturer pin-description table. This application is especially practical for equipment that must preserve a small amount of nonvolatile control logic without allocating a microcontroller or a larger FPGA.

🌐

Legacy Interface Signal Conditioning

The ATF22V10CQZ-20XU can implement compact signal conditioning between asynchronous or differently timed interface sections using its macrocell-based programmable logic. The device’s 20 ns speed class is suitable for many moderate-speed control paths, but the designer must account for setup and hold requirements, propagation tolerance, and the number of available I/O functions. Electrically erasable flash permits field updates to decode tables or interface revisions without replacing the device. The 5 V architecture integrates naturally with legacy 5 V logic, reducing level-conversion complexity. Because a 10-macrocell device has finite routing resources, avoid over-constraining the design with wide simultaneous fan-outs or deep cascaded functions. Validate timing with the system’s worst-case loading and supply conditions before treating the nominal speed as guaranteed board performance.

🖥️

Embedded State-Machine Control

ATF22V10CQZ-20XU can implement a small nonvolatile state machine for sequencing, mode selection, or fault handling when the design fits within 10 macrocells. Programmable flash is useful because state-transition logic can often evolve during development without a package change or IC replacement. The 20 ns grade defines the base propagation target, while the 5 V supply supports integration with the surrounding legacy control voltage domain. Analyze setup and hold timing at the receiving registers and include any external feedback path in the worst-case analysis. A state machine should avoid assumptions that every macrocell is freely available for combinational logic because input and output resources are constrained by the device architecture. Keep unused inputs in a defined state and follow the manufacturer programming and test guidance before releasing the configuration.

🧩

Programmable Test and Measurement Control

The ATF22V10CQZ-20XU is suitable for compact test and measurement control paths that require fixed sequencing, mode selection, or fixture-control decoding. Its nonvolatile electrically erasable flash permits configuration changes as test plans evolve, and the 500-gate, 10-macrocell structure is adequate for small instrument-control functions. The 20 ns speed grade supports many low-to-moderate-speed control tasks, provided the complete timing chain includes instrument handshakes, isolation logic, and board interconnect. The 24-pin TSSOP package allows the decoder to sit close to the controlled interface, helping reduce susceptibility to slow or noisy signal paths. Review the exact operating-temperature limits for the ordering code before using the device in an enclosure with variable internal temperature, and preserve adequate supply decoupling around the 5 V rail.

⚡

Configuration and Power Sequencing Logic

ATF22V10CQZ-20XU can implement programmable enable, reset, and configuration sequencing for a small legacy system because its electrically erasable flash stores the control equations and its 20 ns speed class provides predictable propagation for ordinary digital timing. The 10-macrocell limit requires careful prioritization when many rails or peripherals require ordered control. Use the device outputs to qualify enables rather than assuming it can replace high-current power switches, and include the sequencing requirements of each controlled component in the timing analysis. The 5 V supply and 24-pin TSSOP package fit established control boards that already use this device family. A nonvolatile implementation is useful for maintaining a known power-up state after a reset or power interruption, provided brownout and supply-ramp behavior are also covered by external reset circuitry.

What is the ATF22V10CQZ-20XU?
The ATF22V10CQZ-20XU is a 20 ns electrically erasable programmable logic device from Microchip Technology, containing 500 gates and 10 macrocells in a 24-pin TSSOP package. It uses electrically erasable flash memory for nonvolatile in-circuit reprogramming and operates from a 5 V supply. According to the manufacturer product page, the ATF22V10CQZ family supports speeds down to 12 ns with zero standby power dissipation.
How many gates and macrocells does ATF22V10CQZ-20XU have?
The ATF22V10CQZ-20XU provides approximately 500 logic gates organized into 10 macrocells. The macrocell architecture supports compact implementations of Boolean equations, decoding functions, and control logic. DigiKey’s exact-part listing identifies the device as a 22V10 PLD with 10 macrocells, while the manufacturer’s family description identifies the ATF22V10CQZ as a high-performance electrically erasable CMOS programmable logic device.
What is the operating speed of ATF22V10CQZ-20XU?
The ATF22V10CQZ-20XU is the 20 ns speed-grade version of the ATF22V10CQZ family. The broader family supports speeds down to 12 ns and specifies its speed ranges with zero standby power dissipation. System timing must also include clock distribution, interconnect, and external circuit delays, so the nominal 20 ns grade should not be interpreted as a guaranteed end-to-end delay without the complete timing analysis.
What supply voltage does ATF22V10CQZ-20XU use?
The ATF22V10CQZ-20XU operates from a 5 V supply. The distributor product description identifies the device as a 500-gate, high-speed, 5 V electrically erasable programmable logic device. Designers should use the manufacturer’s recommended supply tolerances and decoupling arrangement so that programming, output timing, and input thresholds remain within the device’s specified operating conditions.
Where can I download the ATF22V10CQZ-20XU datasheet PDF?
The ATF22V10CQZ datasheet PDF is available from the linked Atmel documentation and the manufacturer’s ATF22V10CQZ product page. The PDF contains the family architecture, speed grades, electrical characteristics, pin descriptions, and programming information. Use the ATF22V10CQZ-20XU ordering code to select the exact 20 ns, 24-pin TSSOP configuration when assigning a production part.
Where can I find the ATF22V10CQZ-20XU pinout?
The ATF22V10CQZ-20XU pinout is defined in the manufacturer datasheet’s pin-description and package drawings for the 24-pin TSSOP. The exact part is confirmed as a 24-pin TSSOP by its distributor listing. Use the pin-description table when assigning tracks because generic 24-pin TSSOP drawings can differ in numbering conventions, and do not infer pin functions from another package variant.
Where can I buy ATF22V10CQZ-20XU online?
You can request a quote for ATF22V10CQZ-20XU through the Request a Quote form on this page. The exact part is listed by Microchip Technology and is described as a 22V10 PLD with 10 macrocells in a 24-pin TSSOP package. The manufacturer-direct listing also identifies inventory and factory lead-time information for the exact ordering code.
What is the price of ATF22V10CQZ-20XU?
The current commercial price for ATF22V10CQZ-20XU should be obtained through the Request a Quote form on this page. The manufacturer-direct listing provides exact-part stock and lead-time information, while market availability can change independently of technical status. Submit the 24-pin TSSOP ordering code ATF22V10CQZ-20XU to avoid confusion with other speed grades or package options.
What is the lead time for ATF22V10CQZ-20XU?
The current lead time for ATF22V10CQZ-20XU should be confirmed through the Request a Quote form on this page. The manufacturer-direct product listing shows 56 units in a partial tube and states an estimated factory lead time of 28 weeks for production availability. Because inventory and scheduling can change, request a written allocation and delivery estimate for the exact package and quantity.
Is ATF22V10CQZ-20XU in stock?
The ATF22V10CQZ-20XU was listed with available inventory by the manufacturer-direct channel, including 56 units in a partial tube. Use the Request a Quote form on this page for the current allocation, because a partial-tube quantity may not satisfy a production build requirement. Confirm the tube packing option, delivery date, and whether additional factory production is required before releasing the order.
ATF22V10CQZ-20XU vs ATF22V10CQZ-20XC - which is the better replacement?
ATF22V10CQZ-20XU is the preferred selection when its documented 24-pin TSSOP package, 20 ns grade, and tube packing match the assembly plan. ATF22V10CQZ-20XC is a verified 24-pin TSSOP alternative with the same 10-macrocell ATF22V10 architecture, but its complete electrical and temperature details must be checked before substitution. Both share the same package, making ATF22V10CQZ-20XC the relevant footprint-compatible candidate.
What is the difference between ATF22V10CQZ-20XU and ATF22V10CQZ-20XC?
The ATF22V10CQZ-20XU and ATF22V10CQZ-20XC both appear in the same 24-pin TSSOP ATF22V10CQZ product family and are identified as 10-macrocell devices. The -20 ordering segment is common, while the final code identifies distinct orderable variants. Confirm the manufacturer’s device-selection table for speed, temperature, packing, and programming compatibility before treating one as a substitute.
When should I choose ATF22V10CQZ-20XU over a smaller PLD?
Choose ATF22V10CQZ-20XU when the design needs more than 10 macrocells, nonvolatile electrical reprogramming, or a confirmed 24-pin TSSOP footprint. Its 500-gate ATF22V10 architecture is better suited to compact decoder and control functions than a smaller device. For new designs, compare the required I/O count and timing with newer logic choices as well, because a small CPLD may simplify long-term maintenance.
Is ATF22V10CQZ-20XU suitable for industrial control logic?
The ATF22V10CQZ-20XU is suitable for legacy or compact control logic when its 20 ns speed, 10 macrocells, 5 V supply, and nonvolatile flash configuration meet the system requirements. A listing for the related 20SU industrial-temperature variant confirms that the family is offered for industrial temperature grades, but the exact limits for the -20XU suffix must be checked in the manufacturer datasheet before environmental qualification.
What can replace ATF22V10CQZ-20XU?
The best documented same-footprint candidate is ATF22V10CQZ-20XC, which is listed as a 24-pin TSSOP ATF22V10 device with 10 macrocells. No verified cross-brand, pin-compatible replacement was identified. Confirm timing, temperature grade, supply limits, pin functions, programming method, and packing before substitution; otherwise, treat the replacement as a redesign rather than a drop-in change.
What are the key specifications of ATF22V10CQZ-20XU that engineers should know?
The key ATF22V10CQZ-20XU specifications are a 20 ns speed grade, 500 logic gates, 10 macrocells, 5 V operation, electrically erasable flash programming, zero standby power dissipation, and a 24-pin TSSOP package. According to the manufacturer, the family supports speeds down to 12 ns. These parameters position the part for compact, reprogrammable decoder and control logic rather than high-density programmable-logic designs.

Données de référence d'ingénierie pour ATF22V10CQZ-20XU — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ATF22V10CQZ-20XU for a legacy 24-pin TSSOP design that requires 10 macrocells, approximately 500 gates, a 20 ns speed grade, and electrically erasable flash configuration. It is particularly appropriate for compact address decoding, peripheral control, and small state-machine functions where a microcontroller or FPGA would be unnecessary. Consider ATF22V10CQZ-20XC when its complete electrical, temperature, programming, and packing details meet the design; it is the only verified alternative with the same documented 24-pin TSSOP footprint. Do not select a different-package PLD as a drop-in replacement. For new designs, compare the requirement with current CPLDs and microcontrollers when long-term availability, tool support, or a larger logic margin is important. For existing boards, preserve the original footprint, verify pin functions, timing, supply limits, and programmer compatibility before production release.

Comparaison avec les alternatives

Paramètre Ce produit ATF22V10CQZ-20XC
Brand Microchip Technology Microchip Technology
Package 24-pin TSSOP 24-pin TSSOP
Macrocells 10 macrocells 10 macrocells

Principaux différenciateurs

  • Exact 20 ns speed-grade configuration (vs ATF22V10CQZ-20XC)
  • Nonvolatile electrically erasable configuration (vs ATF22V10CQZ-20XC)
  • Matched 24-pin TSSOP footprint (vs ATF22V10CQZ-20XC)
  • Purpose-built 500-gate architecture (vs ATF22V10CQZ-20XC)

Notes de conception

Do not treat the -20 suffix alone as complete device qualification. Confirm the package, speed grade, temperature range, programming algorithm, and shipping option against the manufacturer’s device-selection table. The exact ATF22V10CQZ-20XU ordering code corresponds to a 24-pin TSSOP device with 10 macrocells; a similarly named variant can use a different package or temperature grade. Preserve the programmed configuration and supply sequencing requirements during any board-level migration.

Build timing analysis around the 20 ns device grade rather than assuming every output reaches a valid state at exactly 20 ns after an input transition. Include combinational logic depth, macrocell routing, board interconnect, input setup and hold requirements, and load capacitance. For legacy control buses, use the manufacturer’s recommended input and output buffering, and keep the PLD close to the interface when traces must be short and properly terminated.

Use the manufacturer’s 24-pin TSSOP land pattern and follow the pin-description table when assigning every signal. Place the programming or test access points so they do not interfere with the functional board, and route sensitive clock or control inputs away from switching-node and high-current return paths. Verify that exposed lead geometry, solder-paste release, and assembly cleaning are compatible with the selected TSSOP footprint before releasing PCB artwork.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer-compatible component listing identifies ATF22V10CQZ-20XU as RoHS Compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact ordering code.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

atf22v10cqz datasheet ATF22V10CQZ-20XU datasheet ATF22V10CQZ-20XU pinout ATF22V10CQZ-20XU datasheet pdf Microchip ATF22V10CQZ-20XU ATF22V10CQZ-20XU price ATF22V10CQZ-20XU stock ATF22V10CQZ-20XU replacement ATF22V10CQZ-20XU equivalent ATF22V10CQZ-20XU vs ATF22V10CQZ-20XC ATF22V10CQZ 24-TSSOP pinout ATF22V10CQZ 500 gate EEPLD ATF22V10CQZ-20XU address decoder ATF22V10CQZ programmable logic application what is ATF22V10CQZ-20XU

Composants & termes associés

Microchip Technology ATF22V10CQZ-20XU ATF22V10CQZ ATF22V10CQZ-20XC ATF22V10CQZ-20SU EEPLD electrically erasable programmable logic device simple programmable logic device SPLD programmable logic device integrated circuit semiconductor CMOS electrically erasable flash memory 10 macrocells 500 gates 20 ns speed grade 5 V supply zero standby power dissipation 24-pin TSSOP TSSOP package family surface-mount package address decoding industrial control logic peripheral control
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ