ATF22V10CQZ-20XU - 20ns 500-Gate EEPLD | Microchip Technology
MPN: ATF22V10CQZ-20XU ✓ NakahandaATF22V10CQZ-20XU Ulas
An EEPLD is an electrically erasable programmable logic device, a member of the simple programmable logic device family within programmable logic devices and integrated logic semiconductors. Unlike a mask-programmed PLD, it retains its programmed configuration in nonvolatile flash memory. This allows firmware or control logic to be updated without replacing the device, making the ATF22V10CQZ suitable for small amounts of glue logic, decoder, control, and state-machine functions.
Key features include 10 macrocells, approximately 500 gates, a 20 ns device speed grade, a 24-pin TSSOP surface-mount package, and a 5 V operating supply. Electrically erasable flash technology supports reconfiguration, while the zero standby power dissipation listed for the ATF22V10 family helps limit inactive-state consumption. These characteristics make the device useful when a fixed PLD would be inflexible but a larger FPGA or microcontroller would be unnecessary.
The ATF22V10 architecture is intended for compact logic decoding and control functions. Its macrocell-based organization provides a practical implementation of sum-of-products Boolean equations, registered outputs where supported, and configurable input/output behavior. The manufacturer specifies the family across multiple speed ranges, including operation down to 12 ns, with zero standby power dissipation. The -20 suffix identifies the 20 ns speed grade used in the ATF22V10CQZ-20XU ordering code.
Typical applications include legacy industrial control, address decoding, interface control, glue logic, and compact peripheral logic that benefits from nonvolatile reprogrammability. It can also support small state machines where the required logic density is below the practical scale of an FPGA or microcontroller. The TSSOP package allows direct placement on a conventional surface-mount PCB while accommodating a moderate number of input and output pins.
Designers should compare the 20 ns speed grade against the required propagation timing and external circuit delays. The 5 V supply must be regulated within the device operating limits, and unused inputs should be handled according to the manufacturer pin-description and design-check guidance. Programming should be performed with a compatible programmer and the manufacturer’s recommended electrical and timing procedures.
This product page consolidates the device architecture, package details, verified ordering information, replacement considerations, and practical selection guidance. It also distinguishes exact-package alternatives from broader functional options so engineers can determine whether a board can be updated without layout changes or requires a redesigned footprint and logic architecture.
Mga alternatibo na pwedeng ilagay na ATF22V10CQZ-20XU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
ATF22V10CQZ-20XC
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →ATF22V10CQZ-20XU Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Electrically Erasable Programmable Logic Device (EEPLD) |
| Programmable Logic Family | ATF22V10 |
| Logic Gate Count | 500 gates |
| Macrocells | 10 macrocells |
| Device Speed Grade | 20 ns |
| Family Minimum Speed | 12 ns |
| Volte ng Pagbibigay | 5 V |
| Standby Power Dissipation | 0 W |
| Programmable Memory Technology | Electrically erasable flash memory |
| Process Technology | CMOS |
| Packhaging | 24-pin TSSOP |
| Package Type | TSSOP surface-mount package |
| Total Pins | 24 pins |
| Tindminan RoHS | RoHS Compliant |
| Shipping Package | Tube |
Gabay sa Pin Configuration ng ATF22V10CQZ-20XU tube
Pin configuration para sa ATF22V10CQZ-20XU (tube package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa ATF22V10CQZ-20XU.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ATF22V10CQZ-20XU ay nararapat para sa 6 aplikasyons: Industrial Address Decoding, Peripheral Control Glue Logic, Legacy Interface Signal Conditioning, Embedded State-Machine Control, Programmable Test and Measurement Control, Configuration and Power Sequencing Logic.
Industrial Address Decoding
The ATF22V10CQZ-20XU fits compact industrial address-decoder logic when the required Boolean function remains within its 10 macrocells and 500-gate capacity. The 20 ns grade gives the design a defined timing target, while the 5 V supply and electrically erasable flash configuration simplify updates to fixed control sequences. Place the device in the 24-pin TSSOP footprint, connect the required address inputs, and route decoded outputs to the controlled subsystem. The principal design consideration is verifying the complete board and peripheral timing rather than relying on the device grade alone; external logic, interconnect, and skew must fit within the system budget. Nonvolatile reprogramming is particularly useful when addressing is maintained across multiple product variants, because the control table can be changed without replacing the IC.
Inirekomenda
Peripheral Control Glue Logic
ATF22V10CQZ-20XU is appropriate for peripheral-control glue logic that combines command decoding, timing qualification, and a small number of registered outputs. Its 10 macrocells provide more structured logic capacity than a basic combinational gate implementation, while the ATF22V10 family’s electrically erasable flash allows control equations to be revised during commissioning. Use the 20 ns grade to establish an initial timing budget for the 5 V interface and verify every path against the peripheral’s input limits. The 24-pin TSSOP package supports conventional surface-mount assembly, but all 24 positions must be assigned according to the manufacturer pin-description table. This application is especially practical for equipment that must preserve a small amount of nonvolatile control logic without allocating a microcontroller or a larger FPGA.
Inirekomenda
Legacy Interface Signal Conditioning
The ATF22V10CQZ-20XU can implement compact signal conditioning between asynchronous or differently timed interface sections using its macrocell-based programmable logic. The device’s 20 ns speed class is suitable for many moderate-speed control paths, but the designer must account for setup and hold requirements, propagation tolerance, and the number of available I/O functions. Electrically erasable flash permits field updates to decode tables or interface revisions without replacing the device. The 5 V architecture integrates naturally with legacy 5 V logic, reducing level-conversion complexity. Because a 10-macrocell device has finite routing resources, avoid over-constraining the design with wide simultaneous fan-outs or deep cascaded functions. Validate timing with the system’s worst-case loading and supply conditions before treating the nominal speed as guaranteed board performance.
Inirekomenda
Embedded State-Machine Control
ATF22V10CQZ-20XU can implement a small nonvolatile state machine for sequencing, mode selection, or fault handling when the design fits within 10 macrocells. Programmable flash is useful because state-transition logic can often evolve during development without a package change or IC replacement. The 20 ns grade defines the base propagation target, while the 5 V supply supports integration with the surrounding legacy control voltage domain. Analyze setup and hold timing at the receiving registers and include any external feedback path in the worst-case analysis. A state machine should avoid assumptions that every macrocell is freely available for combinational logic because input and output resources are constrained by the device architecture. Keep unused inputs in a defined state and follow the manufacturer programming and test guidance before releasing the configuration.
Inirekomenda
Programmable Test and Measurement Control
The ATF22V10CQZ-20XU is suitable for compact test and measurement control paths that require fixed sequencing, mode selection, or fixture-control decoding. Its nonvolatile electrically erasable flash permits configuration changes as test plans evolve, and the 500-gate, 10-macrocell structure is adequate for small instrument-control functions. The 20 ns speed grade supports many low-to-moderate-speed control tasks, provided the complete timing chain includes instrument handshakes, isolation logic, and board interconnect. The 24-pin TSSOP package allows the decoder to sit close to the controlled interface, helping reduce susceptibility to slow or noisy signal paths. Review the exact operating-temperature limits for the ordering code before using the device in an enclosure with variable internal temperature, and preserve adequate supply decoupling around the 5 V rail.
Inirekomenda
Configuration and Power Sequencing Logic
ATF22V10CQZ-20XU can implement programmable enable, reset, and configuration sequencing for a small legacy system because its electrically erasable flash stores the control equations and its 20 ns speed class provides predictable propagation for ordinary digital timing. The 10-macrocell limit requires careful prioritization when many rails or peripherals require ordered control. Use the device outputs to qualify enables rather than assuming it can replace high-current power switches, and include the sequencing requirements of each controlled component in the timing analysis. The 5 V supply and 24-pin TSSOP package fit established control boards that already use this device family. A nonvolatile implementation is useful for maintaining a known power-up state after a reset or power interruption, provided brownout and supply-ramp behavior are also covered by external reset circuitry.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ATF22V10CQZ-20XU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ATF22V10CQZ-20XC |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 24-pin TSSOP | 24-pin TSSOP |
| Macrocells | 10 macrocells | 10 macrocells |
Pangunahing mga Pagkakaiba
- Exact 20 ns speed-grade configuration (kumpara saATF22V10CQZ-20XC)
- Nonvolatile electrically erasable configuration (kumpara saATF22V10CQZ-20XC)
- Matched 24-pin TSSOP footprint (kumpara saATF22V10CQZ-20XC)
- Purpose-built 500-gate architecture (kumpara saATF22V10CQZ-20XC)
Talaan ng Disenyo
Do not treat the -20 suffix alone as complete device qualification. Confirm the package, speed grade, temperature range, programming algorithm, and shipping option against the manufacturer’s device-selection table. The exact ATF22V10CQZ-20XU ordering code corresponds to a 24-pin TSSOP device with 10 macrocells; a similarly named variant can use a different package or temperature grade. Preserve the programmed configuration and supply sequencing requirements during any board-level migration.
Build timing analysis around the 20 ns device grade rather than assuming every output reaches a valid state at exactly 20 ns after an input transition. Include combinational logic depth, macrocell routing, board interconnect, input setup and hold requirements, and load capacitance. For legacy control buses, use the manufacturer’s recommended input and output buffering, and keep the PLD close to the interface when traces must be short and properly terminated.
Use the manufacturer’s 24-pin TSSOP land pattern and follow the pin-description table when assigning every signal. Place the programming or test access points so they do not interfere with the functional board, and route sensitive clock or control inputs away from switching-node and high-current return paths. Verify that exposed lead geometry, solder-paste release, and assembly cleaning are compatible with the selected TSSOP footprint before releasing PCB artwork.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer-compatible component listing identifies ATF22V10CQZ-20XU as RoHS Compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact ordering code.