ATMEGA325A-MU - 8-bit AVR MCU 32KB 20MHz 64-QFN | Microchip
Référence : ATMEGA325A-MU ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.04 | $5,04 |
| 10 | $4.79 | $47,90 |
| 100 | $4.31 | $431,00 |
| 500 | $3.88 | $1 940,00 |
| 1 000 | $3.49 | $3 490,00 |
ATMEGA325A-MU Présentation
An 8-bit AVR microcontroller is a Harvard-architecture RISC processor that executes most instructions in a single clock cycle, sitting within the broader hierarchy of microcontroller units (MCUs) embedded processors used to control a single function inside an electronic system. AVR MCUs from Microchip (originally Atmel) are widely used for their simplicity, low power, and rich peripheral integration on a single chip.
Key features of the ATmega325A include 54 general purpose I/O lines, 32 general purpose working registers, in-system programmable Flash with read-while-write capability, a JTAG interface for on-chip debugging and boundary scan, and an incremental 10-bit ADC. The single-cycle execution model delivers up to 20 MIPS throughput at 20 MHz, allowing C-compiled code to approach the efficiency of 8-bit assembly.
The AVR core combines a rich instruction set with 32 general purpose registers directly connected to the ALU, eliminating the accumulator bottleneck of classic 8051-style designs. Peripheral set includes USART, SPI, and two-wire (I2C-compatible) interfaces, plus multiple 8-bit and 16-bit timers with PWM outputs, enabling motor control, lighting, and communication tasks without external logic.
Typical applications include industrial control panels and instrumentation, consumer appliances and HVAC controls, and battery-powered meters where the low-power idle and power-down modes extend battery life while 32 KB of Flash comfortably hosts protocol stacks and UI code.
For design, use the industrial temperature grade range of the -MU suffix (-40C to +85C) and verify supply-voltage versus frequency derating from the manufacturer datasheet when operating near 20 MHz at low VCC. Keep decoupling capacitors close to the multiple VCC/GND pairs of the 64-QFN exposed-pad package.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-17.
Alternatives de remplacement direct pour ATMEGA325A-MU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATMEGA325A-MU (même facteur de forme et même empreinte) — différant par Package, Number of I/O, RoHS Status, ADC, Flash Memory.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ATMEGA325A-MN
✅ Remplacement direct✓ En stock
$3.17 / unité
Voir la fiche technique →ATMEGA3250A-MU
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATMEGA329A-MU
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATMEGA329P-20MU
✅ Remplacement direct✓ En stock
$4.78 / unité
Voir la fiche technique →ATMEGA325PV-10MU
✅ Remplacement direct✓ En stock
$2.19 / unité
Voir la fiche technique →ATMEGA325A-MU Valeurs maximales et caractéristiques électriques
| Core Processor | AVR |
| Core Size | 8-Bit |
| Max Clock Frequency | 20 MHz |
| Flash Memory | 32 KB (16K x 16) |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| General Purpose I/O | 54 |
| Boîtier | 64-QFN (9x9 mm) Exposed Pad |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Programmability | In-System Programmable (ISP), read-while-write |
| Statut RoHS | Compliant |
Guide de configuration des broches du ATMEGA325A-MU 64-qfn (9x9 mm) exposed pad
Configuration des broches du ATMEGA325A-MU (boîtier 64-qfn (9x9 mm) exposed pad). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATMEGA325A-MU.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATMEGA325A-MU convient pour 6 applications: Industrial Control Panels and Instrumentation, HVAC and Appliance Control, Battery-Powered Metering, Consumer Electronics and Remote Controls, Sensor Nodes and IoT Edge Devices, Motor Control and Lighting Systems.
Industrial Control Panels and Instrumentation
The ATMEGA325A-MU fits industrial control panels because its -40C to +85C industrial temperature grade, 54 GPIO lines, and deterministic single-cycle AVR core directly address the reliability and I/O density demands of factory equipment. A single 20 MHz device can scan a keypad matrix, drive relay outputs, and run a Modus-style UART protocol within its 32 KB Flash budget. Used as the main controller with SPI-connected ADCs or EEPROMs, it removes the need for external glue logic; the trade-off versus a 32-bit MCU is lower arithmetic throughput, which is rarely the constraint in sequenced control loops. Its 1 KB EEPROM retains calibration and configuration data across power cycles without external NVRAM.
Recommandé
HVAC and Appliance Control
Home and commercial HVAC boards benefit from the ATMEGA325A-MU's combination of 54 GPIO for relays, dampers, and displays, and low-power idle modes that reduce standby consumption in always-on appliances. The 32 KB Flash accommodates thermostat scheduling logic, UI state machines, and communication stacks, while the 20 MHz clock provides headroom for PID temperature control loops at kilohertz update rates. Implemented as the master controller driving an LCD via a parallel or serial interface and reading NTC sensors through the ADC, the part consolidates functions that previously required a display driver IC plus a logic MCU, cutting BOM cost. The exposed-pad QFN improves heat spreading on crowded control PCBs.
Recommandé
Battery-Powered Metering
Utility meters and portable instruments leverage the ATmega325A family's power-down and idle sleep modes to achieve multi-year battery life while retaining RAM contents. The AVR wakes on external interrupts or timer overflow, samples the ADC, updates the display, and returns to sleep, keeping average current in the microamp range between measurements. The 32 KB Flash holds tariff tables and communication firmware, and the 1 KB EEPROM stores billing data through battery replacement. Because the 64-QFN footprint is shared with the 64 KB ATMEGA3250A-MU, one PCB can serve both standard and feature-rich meter variants. Design consideration: at 1.8-5.5 V class operation, verify the frequency-versus-voltage derating curve from the Microchip datasheet when sleeping-to-20 MHz transitions occur at low battery voltage.
Recommandé
Consumer Electronics and Remote Controls
The ATMEGA325A-MU serves consumer products such as remote controls, small appliances, and toys where a mid-density Flash, dozens of GPIO, and low unit cost converge. Its 54 I/O lines can directly drive a segment LCD via software multiplexing or a key matrix of up to 8x8 keys, while 20 MHz execution keeps UI response under human-perception thresholds. ISP programming allows final firmware flashing at the end of the production line, simplifying inventory management across product variants on a single PCB. Compared with dedicated ASIC solutions, the AVR's field reprogrammability supports post-launch feature updates via boot-loader. The industrial temperature margin also means consumer boards pass accelerated life testing without a component change.
Recommandé
Sensor Nodes and IoT Edge Devices
Wired and low-power sensor nodes use the ATMEGA325A-MU as the acquisition and protocol engine: its USART, SPI, and I2C-compatible interfaces connect ADCs, RF modules, and EEPROMs, while the 20 MHz core filters data and services the network stack. The 32 KB Flash typically holds a lightweight protocol implementation plus OTA boot-loader, and 2 KB SRAM supports modest buffering of sensor frames. Combined with a low-dropout regulator and a duty-cycled radio module, sleep-mode quiescent current dominates the energy budget, favoring the ATmega family's documented low-power modes. One caution for wireless nodes: the 64-QFN exposed pad must be soldered to a solid ground plane to preserve ADC noise performance near RF circuitry.
Recommandé
Motor Control and Lighting Systems
The ATMEGA325A family's multiple 8-bit and 16-bit timers with PWM outputs make the ATMEGA325A-MU practical for DC fan, pump, and LED lighting control. Firmware-generated or hardware PWM at up to 20 MHz clock granularity provides dimming and speed-control resolution, while ADC inputs read current-sense shunts for protection loops executed in microseconds by the single-cycle core. In LED drivers, the MCU typically manages constant-current regulation, thermal derating, and DMX or DALI-style command decoding within the 32 KB Flash. Note the trade-off: unlike dedicated motor-control MCUs with complementary PWM generators, high-power three-phase drives need external gate-driver ICs; this part targets single-phase and low-voltage motor tasks.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATMEGA325A-MU — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATMEGA325A-MN | ATMEGA3250A-MU | ATMEGA329A-MU | ATMEGA325PV-10MU |
|---|---|---|---|---|---|
| Package | 64-QFN (9x9 mm) Exposed Pad | 64-QFN (9x9 mm) Exposed Pad - same | 64-QFN (9x9 mm) Exposed Pad - same | 64-QFN (9x9 mm) Exposed Pad - same | 64-QFN (9x9 mm) Exposed Pad - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 64 KB | 16 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 4 KB | 1 KB | 2 KB |
| Max Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 10 MHz |
| EEPROM | 1 KB | 1 KB | 2 KB | 512 B | 1 KB |
| Special Features | Standard peripherals, JTAG | Identical (suffix variant) | Larger memory, 69 GPIO | Integrated LCD controller | Low-voltage low-speed grade |
| Drop-in Compatibility | Reference | Full pin-to-pin | Full pin-to-pin (upgrade) | Pin-compatible, verify LCD pin muxing | Pin-to-pin, 10 MHz limit |
Principaux différenciateurs
- Double the code space without a PCB respin (vs ATMEGA3250A-MU)
- Full-speed 20 MHz operation (vs ATMEGA325PV-10MU)
- Simpler pin multiplexing for non-display designs (vs ATMEGA329A-MU)
Notes de conception
The 64-QFN (9x9 mm) package has an exposed thermal pad that must be connected to a solid ground plane through an array of thermal vias. This pad is both the primary heat-removal path and the lowest-inductance ground connection for the AVR core, so poor soldering causes intermittent resets and elevated ADC noise that are hard to diagnose. Follow the Microchip QFN land-pattern recommendation with solder-mask-defined pads, and inspect the underside with X-ray or use X2AP class inspection for production boards.
Place 100 nF ceramic decoupling capacitors at each VCC/GND pin pair, as close to the package as possible, plus a bulk 10 uF capacitor near the supply entry. The AVR core draws transient current spikes synchronized to the 20 MHz clock, and with multiple VCC pins on a 64-QFN, an asymmetric decoupling layout can create ground bounce between internal domains. Estimated: at 20 MHz with typical active current in the low tens of milliamps (per family datasheet figures), supply transients of a few mA per cycle edge require low-impedance decoupling to keep ripple below the brown-out threshold. Enable the internal brown-out detector for supply-sag immunity.
Do not substitute the ATMEGA325PV-10MU for this part in designs clocked above 10 MHz - it will not run reliably at 20 MHz and may fail intermittently at temperature. Also verify the frequency-versus-VCC derating curve in the Microchip datasheet before running 20 MHz at low supply voltage; operation near maximum frequency at reduced VCC is outside the guaranteed operating envelope. When using JTAG pins as GPIO, remember that disabling JTAG via fuse is irreversible without a full chip erase, which also clears lock bits and EEPROM only if the EESAVE fuse is not set.
Informations de conformité
RoHS compliance per Microchip standard product listing on distributor pages. Microchip standard ATmega products are lead-free/RoHS; verify REACH and conflict-minerals declarations via the manufacturer compliance portal for formal documentation.
