ATMEGA329P-20MN - 20MHz 32KB Flash AVR MCU 64-QFN | Microchip
Référence : ATMEGA329P-20MN ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.41 | $2,41 |
| 10 | $2.2 | $22,00 |
| 100 | $1.98 | $198,00 |
| 500 | $1.78 | $890,00 |
| 1 000 | $1.61 | $1 610,00 |
ATMEGA329P-20MN Présentation
What is an 8-bit AVR microcontroller? It is a RISC (Reduced Instruction Set Computer) microcontroller based on the Harvard architecture developed by Atmel (now Microchip). The AVR family occupies the '8-bit MCU' tier of the broader microcontroller hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> AVR RISC MCU -> picoPower family. ATmega devices are positioned at the upper end of the 8-bit AVR range, distinguished by large integrated Flash, SRAM, EEPROM, and rich peripheral sets.
Key features include 54 general-purpose I/O lines, a JTAG interface for on-chip debug, four flexible timer/counters with compare and PWM modes, a 10-bit ADC with up to 8 channels, an LCD controller supporting up to 4x25 segments, and two USART plus one TWI (I2C) and one SPI serial interface. The device operates from 2.7V to 5.5V and supports industrial temperature grades to 105 C.
The ATMEGA329P-20MN leverages the picoPower technology for ultra-low power consumption, with multiple sleep modes (idle, power-down, power-save, standby, extended standby) drawing microampere-level currents. This makes it suitable for battery-powered applications where runtime directly depends on MCU efficiency. The 64-QFN (9x9 mm) package provides good thermal performance and a compact footprint for space-constrained designs.
Typical applications include industrial control panels with integrated LCDs, consumer appliances with graphical displays, sensor hubs with LCD readouts, low-power handheld instrumentation, and embedded human-machine interface (HMI) modules. The combination of an LCD controller and large Flash/SRAM makes it a single-chip solution for graphical HMI nodes.
When designing with this device, ensure decoupling capacitors are placed as close as possible to VCC pins and that the JTAG pins are reserved for debugging access. The LCD voltage generation and segment allocation require careful board layout to avoid ghosting. Always validate low-power claims with a current profile measurement, not just datasheet typ numbers.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical engineering design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour ATMEGA329P-20MN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATMEGA329P-20MN (même facteur de forme et même empreinte) — différant par Package, Timers/Counters, ADC, Communication Interfaces, LCD Controller.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ATMEGA329P-20MNR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMEGA329P-20AN
✅ Remplacement direct✓ En stock
$2.95 / unité
Voir la fiche technique →ATMEGA329P-20ANR
✅ Remplacement direct✓ En stock
$4.3 / unité
Voir la fiche technique →ATMEGA649P-20MN
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMEGA169P-20MN
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATMEGA329P-20MN Valeurs maximales et caractéristiques électriques
| Core Architecture | AVR 8-bit RISC |
| Core Size | 8-bit |
| Fréquence d'horloge maximale | 20 MHz |
| Program Memory (Flash) | 32 KB (16K x 16) |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| General Purpose I/O | 54 |
| Working Registers | 32 |
| Supply Voltage (Vcc) | 2.7 V to 5.5 V |
| ADC | 10-bit, up to 8 channels |
| Température de fonctionnement | -40 C to +105 C (Industrial) |
| Boîtier | 64-QFN (9x9 mm) |
| Type de montage | Surface Mount |
| Timers/Counters | 4 (with PWM) |
| Serial Interfaces | 2x USART, 1x TWI (I2C), 1x SPI |
| LCD Controller | Yes, up to 4x25 segments |
| JTAG Debug | Yes |
| Throughput | Up to 16 MIPS at 20 MHz |
| Statut RoHS | Compliant |
Configuration des broches de ATMEGA329P-20MN
| Broche 1 | SEG1 — LCD segment output 1 |
| Broche 2 | SEG2 — LCD segment output 2 |
| Broche 3 | SEG3 — LCD segment output 3 |
| Broche 4 | SEG4 — LCD segment output 4 |
| Broche 5 | SEG5 — LCD segment output 5 |
| Broche 6 | SEG6 — LCD segment output 6 |
| Broche 7 | SEG7 — LCD segment output 7 |
| Broche 8 | SEG8 — LCD segment output 8 |
| Broche 9 | SEG9 — LCD segment output 9 |
| Broche 10 | SEG10 — LCD segment output 10 |
| Broche 11 | SEG11 — LCD segment output 11 |
| Broche 12 | SEG12 — LCD segment output 12 |
| Broche 13 | SEG13 — LCD segment output 13 |
| Broche 14 | SEG14 — LCD segment output 14 |
| Broche 15 | SEG15 — LCD segment output 15 |
| Broche 16 | SEG16 — LCD segment output 16 |
| Broche 17 | SEG17 — LCD segment output 17 |
| Broche 18 | SEG18 — LCD segment output 18 |
| Broche 19 | SEG19 — LCD segment output 19 |
| Broche 20 | SEG20 — LCD segment output 20 |
| Broche 21 | SEG21 — LCD segment output 21 |
| Broche 22 | SEG22 — LCD segment output 22 |
| Broche 23 | SEG23 — LCD segment output 23 |
| Broche 24 | SEG24 — LCD segment output 24 |
| Broche 25 | COM0 — LCD common output 0 |
| Broche 26 | COM1 — LCD common output 1 |
| Broche 27 | COM2 — LCD common output 2 |
| Broche 28 | COM3 — LCD common output 3 |
| Broche 29 | PA0 — Port A bit 0 / ADC0 |
| Broche 30 | PA1 — Port A bit 1 / ADC1 |
| Broche 31 | PA2 — Port A bit 2 / ADC2 |
| Broche 32 | PA3 — Port A bit 3 / ADC3 |
| Broche 33 | PA4 — Port A bit 4 / ADC4 |
| Broche 34 | PA5 — Port A bit 5 / ADC5 |
| Broche 35 | PA6 — Port A bit 6 / ADC6 |
| Broche 36 | PA7 — Port A bit 7 / ADC7 |
| Broche 37 | VCC — Supply voltage |
| Broche 38 | GND — Ground |
| Broche 39 | AVCC — Analog supply voltage |
| Broche 40 | AREF — ADC reference voltage |
| Broche 41 | PB0 — Port B bit 0 |
| Broche 42 | PB1 — Port B bit 1 |
| Broche 43 | PB2 — Port B bit 2 / SS |
| Broche 44 | PB3 — Port B bit 3 / MOSI |
| Broche 45 | PB4 — Port B bit 4 / MISO |
| Broche 46 | PB5 — Port B bit 5 / SCK |
| Broche 47 | PB6 — Port B bit 6 / XTAL1 |
| Broche 48 | PB7 — Port B bit 7 / XTAL2 |
| Broche 49 | PC0 — Port C bit 0 / JTAG TDI |
| Broche 50 | PC1 — Port C bit 1 / JTAG TMS |
| Broche 51 | PC2 — Port C bit 2 / JTAG TCK |
| Broche 52 | PC3 — Port C bit 3 / JTAG TDO |
| Broche 53 | PC4 — Port C bit 4 |
| Broche 54 | PC5 — Port C bit 5 |
| Broche 55 | PC6 — Port C bit 6 |
| Broche 56 | PC7 — Port C bit 7 |
| Broche 57 | PD0 — Port D bit 0 / RXD0 |
| Broche 58 | PD1 — Port D bit 1 / TXD0 |
| Broche 59 | PD2 — Port D bit 2 / RXD1 |
| Broche 60 | PD3 — Port D bit 3 / TXD1 |
| Broche 61 | PD4 — Port D bit 4 |
| Broche 62 | PD5 — Port D bit 5 |
| Broche 63 | PD6 — Port D bit 6 |
| Broche 64 | PD7 — Port D bit 7 |
Applications typiques
ATMEGA329P-20MN convient pour 7 applications: Industrial Control Panels with LCD, Consumer Appliance HMI Module, Portable Handheld Instrumentation, Automotive Dashboard Clusters, Sensor Hub with LCD Readout, IoT Edge Node with Display, Educational Development Platforms.
Industrial Control Panels with LCD
The ATMEGA329P-20MN's integrated LCD controller (up to 4x25 segments) eliminates the need for an external LCD driver IC, reducing BOM cost and PCB area in industrial control panels. Its 32 KB Flash holds typical menu/UI firmware, while 2 KB SRAM supports stack and modest variable storage. The 54 GPIO lines easily drive keypads, indicator LEDs, and relay outputs alongside the LCD. Operating voltage 2.7V-5.5V and industrial -40 C to +105 C range suit factory-floor environments.
Recommandé
Consumer Appliance HMI Module
Washing machines, microwave ovens, and coffee machines need a single MCU driving a segment LCD plus keypad, buzzer, and appliance control outputs. The ATMEGA329P-20MN combines all peripherals in one 64-QFN chip, simplifying layout. Its picoPower sleep modes extend battery life in cordless appliances, and the 20 MHz clock ensures snappy menu response. The 1 KB EEPROM stores user preferences (cycle settings, language) without external memory.
Recommandé
Portable Handheld Instrumentation
Handheld multimeters, environmental meters, and medical diagnostic tools benefit from the ATMEGA329P-20MN's low-power operation (microampere sleep currents), integrated 10-bit ADC for sensor readout, and LCD controller for numeric/graphical displays. The 20 MHz bus speed handles signal processing fast enough to extend active-mode duty cycle and save battery. The 64-QFN package fits slim enclosures where space is constrained.
Recommandé
Automotive Dashboard Clusters
The ATMEGA329P-20MN's wide operating temperature range, integrated LCD controller for odometer/gear display, and 54 GPIO for sensor inputs suit auxiliary dashboard modules. Its 2.7V-5.5V supply range handles 12V automotive rails after regulation. Note: the -20MN variant is NOT AEC-Q100 qualified - use ATMEGA329P-20MNVAO or ATmega3290P-20AUR for production automotive. This part is suitable for aftermarket non-safety automotive electronics.
Recommandé
Sensor Hub with LCD Readout
Industrial sensor hubs aggregating temperature, pressure, humidity, or flow data benefit from the ATMEGA329P-20MN's 10-bit ADC (up to 8 channels), TWI/SPI for digital sensors, and LCD controller for on-device display. The 32 KB Flash accommodates modbus stack or proprietary protocol libraries. The 1 KB EEPROM retains calibration data after power cycles, and the 2 KB SRAM buffers measurement logs.
Recommandé
IoT Edge Node with Display
Edge IoT nodes displaying sensor readings locally (smart thermostats, building automation keypads) benefit from the ATMEGA329P-20MN's integrated LCD, GPIO for buttons/LEDs, and TWI/SPI/UART for connectivity modules. The picoPower architecture minimizes idle-mode consumption when the display is off. The 20 MHz clock handles local sensor fusion before forwarding aggregated data over UART/SPI to a Wi-Fi/BLE module.
Recommandé
Educational Development Platforms
Universities and training programs use the ATMEGA329P-20MN as a teaching platform for embedded systems courses covering AVR assembly, C programming, ADC, timers, and LCD interfacing. The 64-QFN package is industrial-grade; for breadboard-friendly training, the TQFP-64 ATMEGA329P-20AU is preferred. The Atmel/Microchip Studio IDE supports this device with full debug and simulator, making it a strong pedagogical choice.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATMEGA329P-20MN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATMEGA329P-20MNR | ATMEGA329P-20AN | ATMEGA649P-20MN | ATMEGA169P-20MN |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 64 KB (+100%) | 16 KB (-50%) |
| SRAM | 2 KB | 2 KB | 2 KB | 4 KB (+100%) | 1 KB (-50%) |
| EEPROM | 1 KB | 1 KB | 1 KB | 2 KB (+100%) | 0.5 KB (-50%) |
| GPIO Count | 54 | 54 | 54 | 54 | 54 |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| picoPower Technology | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated LCD controller eliminates external driver IC (vs ATMEGA328P-PU)
- 20 MHz maximum clock with 16 MIPS throughput (vs ATMEGA329-16AU)
- picoPower technology with deep sleep modes (vs ATMEGA3290P-20AU)
- 54 GPIO pins for richer peripheral connectivity (vs ATMEGA169P-20MN)
Notes de conception
Estimated: at 20 MHz active mode with Vcc=5V, the ATMEGA329P-20MN typically draws 15-25 mA depending on peripheral activation; power-down mode drops to sub-1 uA. Use the SLEEP instruction and configure unused peripherals to power-down via PRR (Power Reduction Register) to minimize active current. Always measure actual current on the bench - datasheet typ numbers assume 25 C, 5V, and minimal peripheral activity. Add a 100 nF decoupling cap on each VCC pin plus 10 uF bulk near the MCU.
The 64-QFN package's exposed thermal pad MUST be soldered to the ground plane for both electrical performance and thermal dissipation. Microchip datasheet doc8162 specifies a recommended 64 thermal vias in the pad for best heat transfer. In a 4-layer PCB with 1 oz copper, theta_JA is approximately 28 C/W; at 25 mA active current and 5V supply (125 mW dissipation), junction rise above ambient is roughly 3.5 C - negligible, so heatsinking is unnecessary for this part.
Place a 100 nF ceramic decoupling capacitor within 3 mm of each VCC pin (multiple VCC pins on this 64-QFN). Add a single 10 uF bulk capacitor near the MCU. For the LCD segment outputs, route traces with 0.1-0.2 mm spacing from adjacent signal lines to minimize crosstalk on low-voltage LCD waveforms. The JTAG pins (PC2-PC5) should be routed to a 0.1 inch header for debug access; if unused, configure them as GPIO. The RESET pin needs a 10 kohm pullup to VCC and a 100 nF cap to ground for in-circuit programming reliability.
Do not confuse the ATMEGA329P (with P suffix for picoPower) with the older non-P ATMEGA329 (without low-power features) when ordering - they share the same datasheet family but have different power profiles. When migrating between QFN (MN) and TQFP (AU) packages, verify your PCB footprint matches - they are mechanically incompatible. The 64-QFN MN package does NOT have leads like TQFP, requiring different soldering profiles. Check the JTAG fuse (JTAGEN) is enabled for debug if your programmer cannot connect.
Informations de conformité
RoHS compliant per Microchip product page. The ATMEGA329P-20MN is NOT AEC-Q100 qualified - use ATMEGA329P-20MNVAO or automotive variants like ATmega3290P-20AUR for production automotive. Halogen-free per Microchip packaging materials declaration.