ATMEGA4808-XF - 8-bit AVR MCU 20MHz 48KB Flash | Microchip
Référence : ATMEGA4808-XF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
ATMEGA4808-XF Présentation
An 8-bit AVR microcontroller is a single-chip Harvard-architecture processor that integrates a RISC CPU, non-volatile program memory, SRAM data memory, and peripheral controllers (serial ports, timers, ADC) within one IC. Within the power-management-and-embedded hierarchy, it belongs to the microcontroller (MCU) category: MCU -> embedded processor -> integrated circuit. The megaAVR 0-series is Microchip's modernized AVR family, replacing the classic ATmega328 generation with richer peripherals and Core Independent Peripherals (CIPs).
Key features include the AVR RISC CPU with hardware multiplier for efficient math, up to 48 KB Flash / 6 KB SRAM / 256 B EEPROM, a 10-bit ADC, analog comparators, RTC, and multiple USARTs, SPI and TWI (I2C) interfaces. Functional Safety (FuSa) support and an RTC with CIP operation reduce external component count.
Technically, the ATmega4808 uses the latest AVR core with single-cycle I/O access and event routing between peripherals, enabling deterministic, software-light operation. The event system and sleep modes support low-power, interrupt-driven designs.
Typical applications include industrial control and automation nodes, home-appliance and HVAC control boards, and legacy ATmega328-based designs migrating to a modern AVR with more memory and peripherals.
A key design consideration is clocking: the internal 20 MHz oscillator removes the need for an external crystal in most designs, but precise timing applications should verify clock accuracy against the datasheet.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour ATMEGA4808-XF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATMEGA4808-XF (même facteur de forme et même empreinte) — différant par SRAM, Series, Core Processor, Flash Memory, EEPROM.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ATMEGA3208-XF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.19 / unité
Voir la fiche technique →ATMEGA1608-XFR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.66 / unité
Voir la fiche technique →ATMEGA808-XF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.72 / unité
Voir la fiche technique →ATMEGA4808-XF Valeurs maximales et caractéristiques électriques
| Core Processor | AVR (8-bit RISC) with hardware multiplier |
| Core Size | 8-bit |
| Speed | 20 MHz |
| Program Memory Type | FLASH |
| Program Memory Size | 48 KB (24K x 16) |
| SRAM | 6 KB |
| EEPROM | 256 bytes |
| Series | megaAVR 0-series (ATmega4808/4809) |
| Boîtier | 28-SOIC/28-SSOP (per DigiKey: 28-SSOP) |
| Type de montage | Surface Mount |
| Caractéristiques | Functional Safety (FuSa) |
Guide de configuration des broches du ATMEGA4808-XF 28-soic/28-ssop (per digikey: 28-ssop)
Configuration des broches du ATMEGA4808-XF (boîtier 28-soic/28-ssop (per digikey: 28-ssop)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATMEGA4808-XF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATMEGA4808-XF convient pour 6 applications: Industrial Control and Automation Nodes, Home Appliance and HVAC Control, Sensor Nodes and IoT Edge Devices, Motor Control and Fan Interfaces, Battery-Powered Portable Instruments, ATmega328 Legacy Migration and New 5V Embedded Designs.
Industrial Control and Automation Nodes
The ATMEGA4808-XF fits industrial control nodes where a robust 8-bit MCU handles sensor polling, actuator control, and serial communication. Its 20 MHz AVR core with hardware multiplier accelerates scaling and fixed-point math for PID loops, while 48 KB Flash leaves headroom for protocol stacks and field-updatable firmware. Core Independent Peripherals (timers, comparators, event system) continue operating during CPU sleep, reducing latency in closed-loop control. The 28-pin SOIC/SSOP package suits compact DIN-rail and sensor-head boards. Its Functional Safety (FuSa) categorization supports designs targeting safety-related industrial functions; designers should follow the FuSa documentation package and Microchip safety manual when certifying the end application.
Recommandé
Home Appliance and HVAC Control
Appliance and HVAC control boards benefit from the ATMEGA4808-XF's combination of 48 KB Flash, 256 B EEPROM for stored user settings and calibration data, and an RTC peripheral for scheduling. The internal oscillator eliminates crystal cost on cost-sensitive appliance PCBs, and the 10-bit ADC family peripherals read NTC temperature sensors, potentiometers and current-shunt inputs. The 28-pin package keeps board area small for tight enclosures. Because appliance designs demand long product lifecycles, sourcing from multiple distributors (Octopart lists 8) plus the megaAVR 0-series family laddering (808/1608/3208 in the same footprint) gives buyers a memory-cost optimization path without PCB respin over the product's life.
Recommandé
Sensor Nodes and IoT Edge Devices
For sensor nodes, the ATMEGA4808-XF offers 6 KB SRAM - enough for buffered sensor data, a lightweight network stack, and OTA-update double-buffering strategies within 48 KB Flash. Core Independent Peripherals sample sensors and manage wake timers while the CPU sleeps, directly lowering average current draw in battery-powered nodes. USARTs, SPI and TWI (I2C) connect to RF modules and MEMS sensors; the event system routes peripheral signals without CPU intervention. The 28-pin SOIC/SSOP package suits both compact modules and cable-tethered remote heads. Developers can prototype quickly using the MegaCoreX Arduino package, then transition to bare-metal code for production power optimization.
Recommandé
Motor Control and Fan Interfaces
Basic motor and fan control (BLDC trapezoidal, DC brushed, stepper sequencing) maps well onto the ATMEGA4808-XF: TCA/TCB/TCD timer peripherals generate complementary PWM, the 10-bit ADC reads back EMF and current sense resistors, and analog comparators support over-current trip without CPU latency via the event system. The 20 MHz core with hardware multiplier executes control-loop math comfortably for low-speed 8-bit-class drives. The 28-pin package drives a small gate-driver front end. For cost-optimized products, the same-footprint ATMEGA1608-XF or ATMEGA3208-XF may be substituted when the control firmware fits in less Flash, allowing one PCB to serve multiple product tiers.
Recommandé
Battery-Powered Portable Instruments
Portable measurement instruments use the ATMEGA4808-XF for its low-power sleep modes, RTC-based wake scheduling, and 6 KB SRAM for data logging. The ADC and analog comparators form the front end for voltage/current measurement channels, while 48 KB Flash stores calibration tables and a display driver. The internal oscillator removes the crystal and its startup/power overhead. Firmware can implement duty-cycled sampling: sleep in power-down between conversions, wake via RTC, sample via event-triggered ADC, and burst-transmit over USART. The 28-pin SOIC/SSOP industrial-grade package suits handheld enclosures, and multiple memory-size options in the same footprint let vendors trim BOM cost per model.
Recommandé
ATmega328 Legacy Migration and New 5V Embedded Designs
Teams maintaining ATmega328-based products (Arduino-class boards, 3D-printer controllers, hobby products) can migrate to the ATMEGA4808-XF for doubled SRAM (6 KB vs 2 KB), 50% more Flash, a hardware multiplier, and modern peripherals, while staying in the familiar AVR ecosystem. Community tooling (MegaCoreX) provides Arduino compatibility, easing porting. The 20 MHz maximum clock matches the fastest classic AVRs, so timing budgets carry over. Because the 28-pin SOIC/SSOP footprint differs from the ATmega328's, migration requires a PCB revision; designing new boards directly around the megaAVR 0-series future-proofs the platform and provides a memory laddering path (808/1608/3208/4808) on one layout.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATMEGA4808-XF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATMEGA3208-XF | ATMEGA1608-XF | ATMEGA808-XF |
|---|---|---|---|---|
| Package | 28-SOIC/SSOP | 28-SOIC/SSOP - same | 28-SOIC/SSOP - same | 28-SOIC/SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 48 KB (24K x 16) | 32 KB | 16 KB | 8 KB |
| SRAM | 6 KB | 4 KB | 2 KB | 1 KB |
| EEPROM | 256 bytes | 256 bytes | 256 bytes | 128 bytes |
| Max CPU Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Hardware Multiplier | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Largest Flash in the 28-pin megaAVR 0-series footprint (vs ATMEGA3208-XF)
- Functional Safety (FuSa) categorization (vs ATMEGA328P-AU)
- Memory laddering on one footprint (vs ATMEGA808-XF)
Notes de conception
Decouple VDD with a 100 nF ceramic capacitor placed within a few millimeters of the pin, plus a 1-10 uF bulk capacitor per supply rail. Verify the exact supply voltage range in the ATmega4808/4809 datasheet (DS40002173B) electrical characteristics table before finalizing the regulator; this page's verified data did not include the operating voltage window. If using a switching pre-regulator, add an LC filter or LDO ahead of the MCU when ADC accuracy matters, since switching ripple degrades ADC noise floor on 8-bit AVR parts.
Keep the UPDI programming pin (the single-wire debug/programming interface) accessible via a 3-pin header or tag-connect pad on production boards - the megaAVR 0-series cannot be programmed via legacy ISP, and losing UPDI access means rework or socket programming. Route the analog ADC inputs away from the switching/timer PWM traces on the 28-pin package, where pin density is high; a ground pour under the IC improves ADC reference stability and reduces crosstalk between the analog comparator inputs and fast digital edges.
The most common migration pitfall from ATmega328 designs is assuming register-level compatibility: the megaAVR 0-series uses a completely different peripheral register map and UPDI instead of ISP programming, so classic ISP programmers will not work. Another frequent error is forgetting that EEPROM writes on AVRs require the EEPROM-ready interrupt or polling before power-down - losing the last stored settings in an appliance is a field-failure mode. Budget Flash carefully: 48 KB is generous, but Arduino-style abstraction can consume it quickly; keep the same-footprint ATMEGA3208-XF in mind only when the design truly fits 32 KB.
Informations de conformité
RoHS/REACH/lead-free status not explicitly stated in the verified data as of 2026-09-18; the -F suffix conventionally denotes Pb-free packaging in Microchip nomenclature, but confirmation must come from Microchip's official product page or distributor environmental data.
