ATSAMD21J16B-MU - 64KB Flash Cortex-M0+ MCU | Microchip 64-QFN
Référence : ATSAMD21J16B-MU ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.07 | $30,70 |
| 100 | $2.74 | $274,00 |
| 500 | $2.45 | $1 225,00 |
| 1 000 | $2.18 | $2 180,00 |
ATSAMD21J16B-MU Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. The ARM Cortex-M0+ is the smallest and most energy-efficient ARM processor core, designed for embedded applications that prioritize low power consumption and deterministic real-time response. Within the broader taxonomy, the SAM D21 sits at the intersection of MCU -> 32-bit MCU -> ARM Cortex-M MCU -> low-power MCU -> Microchip SAM D family, and the ATSAMD21J16B is the 64KB Flash variant within the SAM D21J 64-pin sub-family.
Key features include the Cortex-M0+ core delivering 2.46 CoreMark/MHz, full-speed USB 2.0 device/host support, a 12-bit 1 MSPS ADC, two I2C, up to six SERCOM (configurable serial communication), and advanced low-power Idle/Standby sleep modes with SleepWalking peripherals. The device also integrates a 12-channel DMAC, a 12-channel Event System, and a 48MHz DFLL locked to a 32.768kHz crystal for accurate USB timing. The 64-QFN package with EPAD provides a low-thermal-resistance path to the PCB copper pour, enabling sustained 48MHz operation in thermally constrained industrial enclosures.
The SAM D21 family is drop-in compatible with the SAM D20 family, simplifying migration from lower-pin-count or smaller-Flash designs. The 64KB Flash variant (J16) is positioned for cost-sensitive connected designs that need USB, more serial channels, or a richer analog front end than the J15 (32KB) variant. With its combination of low power, USB, and Cortex-M0+ performance, the ATSAMD21J16B-MU targets IoT sensor nodes, consumer USB peripherals, and industrial control modules.
Alternatives de remplacement direct pour ATSAMD21J16B-MU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATSAMD21J16B-MU (même facteur de forme et même empreinte) — différant par Package, ADC, USB, Operating Temperature, DAC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ATSAMD21J15B-MU
✅ Remplacement direct✓ En stock
$1.74 / unité
Voir la fiche technique →ATSAMD21J17B-MU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAMD21J18B-MU
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAMD21J16B-MU Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM Cortex-M0+ (32-bit) |
| Maximum CPU Frequency | 48 MHz |
| CoreMark/MHz | 2.46 CoreMark/MHz |
| Flash Memory | 64 KB |
| SRAM | 8 KB |
| Boîtier | 64-QFN (9x9 mm) with EPAD |
| Operating Voltage (VDDIN) | 1.62 V to 3.63 V |
| Température de fonctionnement | -40C to +85C (industrial) |
| USB | USB 2.0 Full-Speed Device + Host |
| ADC | 12-bit, up to 1 MSPS, 20 channels |
| SERCOM | 6 configurable serial interfaces |
| DMAC Channels | 12 |
| Event System Channels | 12 |
| Timer/Counters (TC) | Multiple 16-bit and 8-bit TC |
| GPIO (max) | 52 |
| Debug Interface | Serial Wire Debug (SWD), 2-pin |
| Low-Power Modes | Idle, Standby, Backup, SleepWalking peripherals |
| Statut RoHS | Compliant (Green) |
Configuration des broches de ATSAMD21J16B-MU
| Broche 1 | PA00 — GPIO / XIN32 (32.768kHz crystal input) |
| Broche 2 | PA01 — GPIO / XOUT32 (32.768kHz crystal output) |
| Broche 3 | PA02 — GPIO / AIN0 (ADC analog input 0) |
| Broche 4 | PA03 — GPIO / AIN1 / VREFA / REFADC |
| Broche 5 | GND — Ground |
| Broche 6 | VDD — Digital supply voltage (1.62V to 3.63V) |
| Broche 7 | PA04 — GPIO / AIN2 / VREFB |
| Broche 8 | PA05 — GPIO / AIN3 |
| Broche 9 | PA06 — GPIO / AIN4 |
| Broche 10 | PA07 — GPIO / AIN5 |
| Broche 11 | PA08 — GPIO / AIN6 / I2S SCK |
| Broche 12 | PA09 — GPIO / AIN7 / I2S FS |
| Broche 13 | PA10 — GPIO / AIN8 / I2S MCK |
| Broche 14 | PA11 — GPIO / AIN9 / I2S SDO |
| Broche 15 | VDDIO — I/O supply voltage |
| Broche 16 | GND — Ground |
| Broche 17 | PA12 — GPIO / AIN10 / SDI |
| Broche 18 | PA13 — GPIO / AIN11 / SDO |
| Broche 19 | PA14 — GPIO / AIN12 / SCK |
| Broche 20 | PA15 — GPIO / AIN13 / CS |
| Broche 21 | PA16 — GPIO / I2C SDA (SERCOM) |
| Broche 22 | PA17 — GPIO / I2C SCL (SERCOM) |
| Broche 23 | PA18 — GPIO / USB DM (USB D-) |
| Broche 24 | PA19 — GPIO / USB DP (USB D+) |
| Broche 25 | PA20 — GPIO / TCC0 |
| Broche 26 | PA21 — GPIO / TCC0 |
| Broche 27 | PA22 — GPIO / TCC0 |
| Broche 28 | PA23 — GPIO / TCC0 |
| Broche 29 | PA24 — GPIO / USB Host enable |
| Broche 30 | PA25 — GPIO / USB VBUS sense |
| Broche 31 | GND — Ground |
| Broche 32 | VDDIN — Voltage regulator input supply |
| Broche 33 | PA27 — GPIO |
| Broche 34 | PA28 — GPIO / RESET (alternate function) |
| Broche 35 | PA29 — GPIO / SWDIO |
| Broche 36 | PA30 — GPIO / SWCLK |
| Broche 37 | PA31 — GPIO |
| Broche 38 | PB00 — GPIO / AIN14 |
| Broche 39 | PB01 — GPIO / AIN15 |
| Broche 40 | PB02 — GPIO / AIN16 |
| Broche 41 | PB03 — GPIO / AIN17 |
| Broche 42 | PB04 — GPIO / AIN18 |
| Broche 43 | PB05 — GPIO / AIN19 |
| Broche 44 | PB06 — GPIO |
| Broche 45 | PB07 — GPIO |
| Broche 46 | PB08 — GPIO / I2C SDA (alt SERCOM) |
| Broche 47 | PB09 — GPIO / I2C SCL (alt SERCOM) |
| Broche 48 | PB10 — GPIO |
| Broche 49 | PB11 — GPIO |
| Broche 50 | PB12 — GPIO |
| Broche 51 | PB13 — GPIO |
| Broche 52 | PB14 — GPIO |
| Broche 53 | PB15 — GPIO |
| Broche 54 | PB16 — GPIO |
| Broche 55 | PB17 — GPIO |
| Broche 56 | PB18 — GPIO |
| Broche 57 | PB19 — GPIO |
| Broche 58 | PB20 — GPIO |
| Broche 59 | PB21 — GPIO |
| Broche 60 | PB22 — GPIO |
| Broche 61 | PB23 — GPIO |
| Broche 62 | PB24 — GPIO |
| Broche 63 | PB25 — GPIO |
| Broche 64 | EPAD — Exposed thermal pad - connect to GND |
Applications typiques
ATSAMD21J16B-MU convient pour 7 applications: USB HID Consumer Devices, Industrial Sensor Hubs, Battery-Powered IoT Nodes, Home Automation Controllers, Wearables and Fitness Devices, Automotive Body Electronics (Non-Safety), Smart Agriculture Sensor Nodes.
USB HID Consumer Devices
The ATSAMD21J16B-MU's integrated USB 2.0 Full-Speed controller with device and host modes makes it a strong fit for USB HID peripherals such as keyboards, mice, game controllers, and custom HID devices. The Cortex-M0+ core at 48MHz delivers enough throughput for complex HID descriptors and on-device firmware updates, while 64KB Flash accommodates USB stacks plus application code. The on-chip transceiver eliminates external USB PHY components, reducing BOM and PCB area, and the SERCOM peripherals provide flexible GPIO-to-USB bridging for legacy peripherals.
Recommandé
Industrial Sensor Hubs
The ATSAMD21J16B-MU's 12-bit 1 MSPS ADC with up to 20 channels, combined with 6 SERCOM interfaces and a 12-channel Event System, suits industrial sensor hub designs aggregating analog and digital sensors over I2C, SPI, and UART. The industrial -40C to +85C temperature rating supports factory-floor deployment. The 64KB Flash and 8KB SRAM are sufficient for Modbus or CANopen firmware stacks plus sensor calibration tables, and the Event System enables deterministic, low-latency sensor sampling without CPU intervention.
Recommandé
Battery-Powered IoT Nodes
The ATSAMD21J16B-MU's Idle, Standby, and Backup sleep modes plus SleepWalking peripherals enable multi-year battery life in IoT sensor nodes. The Event System can autonomously wake the ADC, compare a reading against a threshold, and only invoke the CPU when action is required, keeping average current in the single-digit microamp range. The 48MHz performance headroom supports burst-mode LoRa, BLE, or sub-GHz radio packet handling, while 64KB Flash accommodates OTA update staging buffers for future-proof firmware management.
Recommandé
Home Automation Controllers
The ATSAMD21J16B-MU integrates the peripherals needed for home automation gateways: USB for Wi-Fi/BLE module attachment, multiple SERCOM for sensor buses (I2C, SPI), timers for HVAC control loops, and ADC for analog sensor inputs. The 64-QFN (9x9 mm) package with EPAD allows compact gateway PCB layouts, and the 8KB SRAM comfortably supports small TCP/IP stacks over an external Wi-Fi module. Cortex-M0+ simplicity also keeps firmware development straightforward on the Microchip Studio/MPLAB X platform.
Recommandé
Wearables and Fitness Devices
The ATSAMD21J16B-MU's low-power Standby mode (single-digit microamp with RTC) combined with a 48MHz burst-mode Cortex-M0+ is well suited to battery-powered wearables such as fitness bands, heart-rate monitors, and BLE beacons. The 12-bit ADC supports bio-impedance and optical heart-rate sensor front ends, while SERCOM enables I2C/SPI connections to accelerometers and BLE modules. The 9x9 mm QFN footprint leaves room for small, curved wearable PCBs, and Microchip's ASF/START driver library accelerates time-to-market.
Recommandé
Automotive Body Electronics (Non-Safety)
The ATSAMD21J16B-MU's industrial -40C to +85C rating, CAN-friendly SERCOM (via external transceiver), and 64KB Flash suit non-safety automotive body applications such as HVAC controls, seat controllers, lighting modules, and infotainment secondary displays. The integrated USB enables media player and smartphone interface connectivity, while the Event System guarantees deterministic response times for body-control tasks. For ASIL-rated safety functions, designers should use Microchip's dedicated automotive-qualified SAM D20/D21 variants instead of the industrial-grade J16B-MU.
Recommandé
Smart Agriculture Sensor Nodes
The ATSAMD21J16B-MU combines low-power operation with sufficient peripherals for smart agriculture applications including soil moisture sensing, environmental monitoring, and irrigation valve control. The 12-bit ADC digitizes multiple analog sensors, the RTC with Standby mode enables scheduled wake cycles for years of battery life, and the SERCOM interfaces support LoRa, NB-IoT, or Sub-GHz radio modules for field-area-network connectivity. The wide operating temperature range supports harsh outdoor deployment in agricultural environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATSAMD21J16B-MU — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATSAMD21J15B-MU | ATSAMD21J17B-MU | ATSAMD21J18B-MU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9x9 mm) | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same | 64-QFN (9x9 mm) - same |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 32 KB (-50%) | 128 KB (+100%) | 256 KB (+300%) |
| SRAM | 8 KB | 4 KB (-50%) | 16 KB (+100%) | 32 KB (+300%) |
| USB | USB 2.0 FS Device + Host | USB 2.0 FS Device + Host | USB 2.0 FS Device + Host | USB 2.0 FS Device + Host |
| ADC Resolution | 12-bit / 1 MSPS | 12-bit / 1 MSPS | 12-bit / 1 MSPS | 12-bit / 1 MSPS |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Balanced Flash/RAM in the SAM D21J family at lowest price point (vs ATSAMD21J15B-MU)
- Half the Flash capacity of the J17, identical silicon for cost savings (vs ATSAMD21J17B-MU)
- Industrial temperature rated, full SAM D21 feature set in 64-QFN (vs ATSAMD20J16A-MU)
Notes de conception
The SAM D21 family operates from a single 1.62V to 3.63V rail on VDDIN; the internal voltage regulator generates the 1.2V core supply from VDDIN. Place a 1uF X7R decoupling capacitor as close as possible to each VDD/VDDIO pin pair. For USB applications, VDDIN must be at least 3.0V for reliable USB signaling, and a 10uF bulk capacitor on VBUS is recommended when powering from USB. Avoid switching the main supply below the BOD threshold without proper reset handling.
The 64-QFN package with EPAD provides the primary heat-dissipation path; solder the EPAD to a continuous ground copper pour of at least 25 mm^2 for best thermal performance. At 48MHz the SAM D21 typically dissipates under 30 mW, so the EPAD copper is more for electrical grounding than thermal relief, but it must not be left floating - an ungrounded EPAD can cause latch-up and erratic behavior under temperature stress.
Place the 32.768kHz crystal and its load capacitors within 5 mm of the XIN32/XOUT32 pins (PA00/PA01). Use short, symmetric traces and a ground guard ring for low-jitter RTC operation. The DFLL48M locking to this crystal provides USB-accurate 48MHz; long, asymmetric traces will increase cycle-to-cycle jitter and degrade USB compliance margins. Keep the 32kHz traces away from switching signals and DC-DC inductors.
Do not confuse the SAM D21J16B-MU (industrial temp, 64-QFN, Green/RoHS-compliant) with the J16B-AU (64-TQFP) or the J16A revision (earlier silicon with errata). The 'B' revision is required for the latest USB and SERCOM fixes. Also note that the SAMD21 SERCOM peripheral requires explicit pin-mux configuration in firmware - the default port pin assignments are NOT the same as the GPIO port letter; consult the SAM D21 datasheet pin-mux tables before assigning I2C or SPI signals.
Informations de conformité
Green-compliant per Microchip product page; industrial temperature grade only (not AEC-Q100 qualified for automotive). Lead-free finish. RoHS and REACH compliant.
