Microchip Technology

ATTINY12V-1PU - 8-Bit 1MHz AVR MCU | Microchip

Référence : ATTINY12V-1PU ✓ Actif
2.5 V, 3.3 V, or 5 V Vdss 2.2 mA at 25 °C Id 8-pin PDIP Package 1 MHz Speed 1 KB Flash Memory
MOQ : 1 |

ATTINY12V-1PU Présentation

The Microchip Technology ATTINY12V-1PU is an 8-bit AVR microcontroller with 1 KB of Flash program memory, 64 bytes of EEPROM, six I/O ports, and a 1 MHz clock in an 8-pin PDIP package. Designed for compact embedded-control tasks, it combines an AVR RISC core, low-power operating modes, and a small pin count in a 0.300-inch, 7.62 mm-wide dual in-line package.

An 8-bit microcontroller is a compact processor designed around an 8-bit data path for embedded control rather than desktop computing. The ATTINY12 belongs to the ATtiny hierarchy within AVR microcontrollers, combining a CPU core, nonvolatile program memory, data EEPROM, and general-purpose I/O in one package. This integration allows a small controller to sense inputs, execute embedded logic, and operate outputs without a separate processor or memory device.

The ATTINY12V-1PU provides 1 KB of Flash memory for firmware, 64 bytes of EEPROM for retained data, and six I/O ports. Its low-power CMOS implementation supports operation across the device's stated supply-voltage options of 2.5 V, 3.3 V, and 5 V. The device uses the AVR instruction architecture and is suitable for simple sequencing, logic, debouncing, signal generation, and compact peripheral-control functions where memory and processing requirements are modest.

At the system level, the microcontroller's small footprint makes it useful in prototypes, automation modules, educational boards, and dedicated appliance controls. The PDIP format is particularly convenient for breadboards, fixture-based programming, and low-volume fabrication because its 0.300-inch pitch provides generous spacing between pins. Unlike fine-pitch surface-mount packages, the through-hole body is straightforward to inspect and rework.

Typical uses include relay timing, LED indication, push-button interfaces, simple sensor conditioning, low-speed control loops, and compact embedded logic modules. Because the device has only 1 KB of program memory, applications should use concise firmware, avoid unnecessary library overhead, and keep buffering or computation requirements modest.

PCB design should provide a stable decoupling capacitor near the supply pin, preserve adequate ground-return paths, and keep switching or high-current outputs separated from sensitive input traces. Confirm oscillator, reset, programming, and I/O requirements against the manufacturer datasheet before finalizing the schematic or PCB footprint.

This page combines the device specifications, pin-level guidance, application context, verified drop-in candidates, and practical implementation notes needed to evaluate the ATTINY12V-1PU before schematic capture or sourcing.

Alternatives de remplacement direct pour ATTINY12V-1PU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec ATTINY12V-1PU (même facteur de forme et même empreinte) — différant par Maximum Clock Frequency, Mounting Type, Process Technology.

Microchip Technology
Maximum Clock Frequency: 20 MHz
Mounting Type: Through-hole
Process Technology: Low-power CMOS
Comparer avec ATTINY12V-1PU →

ATTINY12V-1PC

✅ Remplacement direct
📦 8-pin PDIP
Retains the 1 MHz ATTINY12V configuration and 1 KB Flash memory, while the ordering suffix changes the documented grade or packing arrangement.

📋 Alternative de référence (hors catalogue)

ATTINY12-8PC

✅ Remplacement direct
📦 8-pin PDIP
Uses the original ATTINY12 family rather than ATTINY12V, with a different documented operating and timing configuration despite 1 KB Flash memory and the same PDIP footprint.

📋 Alternative de référence (hors catalogue)

ATTINY13A-PU

✅ Remplacement direct
Microchip Technology
📦 8-pin PDIP
8-bit AVR microcontroller · AVR enhanced RISC · 20 MHz · 20 MIPS at 20 MHz · 1.8 V to 5.5 V · 1 KB · 512 x 16 words · 64 bytes

Contactez-nous pour le prix

Voir la fiche technique →

ATTINY13V-10PQ

✅ Remplacement direct
📦 8-pin PDIP
Uses the ATTINY13V low-voltage family with a 10 MHz clock rather than the ATTINY12V 1 MHz configuration, requiring timing and firmware review.

📋 Alternative de référence (hors catalogue)

ATTINY12V-1PU Valeurs maximales et caractéristiques électriques

Product Type 8-bit AVR RISC microcontroller
Program Memory 1 KB Flash
Program Memory Organization 512 x 16 words
EEPROM Memory 64 bytes
Fréquence d'horloge maximale 1 MHz
CPU Architecture AVR 8-bit RISC
I/O Port Count 6 ports
Supply Voltage Options 2.5 V, 3.3 V, or 5 V
Active Current at 4 MHz and 3 V 2.2 mA at 25 °C
Idle Current at 4 MHz and 3 V 0.5 mA at 25 °C
Power-Down Current Less than 1 µA
Package Type 8-pin PDIP
Package Body Width 0.300 inch, 7.62 mm
Package Pitch 0.100 inch, 2.54 mm
Type de montage Through-hole dual in-line
Process Technology Low-power, high-speed CMOS
Operating Mode Fully static
Statut du cycle de vie Active

Configuration des broches de ATTINY12V-1PU

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Broche 1 PB0/MOSI/DI/SDA — Port B0 input/output with programming and serial-data functions
Broche 2 PB1/MISO — Port B1 input/output with programming clock function
Broche 3 PB2/OC1A/PCINT2 — Port B2 input/output with timer output and pin-change interrupt functions
Broche 4 PB3/PCINT3 — Port B3 input/output with pin-change interrupt function
Broche 5 GND — Ground supply connection
Broche 6 PB4/RESET — Port B4 input/output and reset function
Broche 7 PB5 — Port B5 input/output
Broche 8 VCC — Positive supply voltage connection

Applications typiques

ATTINY12V-1PU convient pour 6 applications: Industrial Relay and Timing Control, Battery-Powered Sensor Interface, LED Sequencing and Indicator Panel, Push-Button and Human Interface Controller, Simple Signal Generator and Test Fixture, Educational Microcontroller Training Board.

🏭

Industrial Relay and Timing Control

The ATTINY12V-1PU fits compact relay-control and timing modules where six I/O ports, 1 KB of Flash memory, and a 1 MHz clock are sufficient. It can encode button states, manage a relay sequence, drive status indicators, and debounce external contacts without a larger processor. The 8-pin PDIP package simplifies point-to-point wiring and prototype rework, while the low-power operating modes help reduce energy use during long idle periods. Before finalizing the board, confirm that relay-driver transients do not corrupt supply or I/O signals and verify timing against the selected ATtiny12V operating point.

🧩

Battery-Powered Sensor Interface

The ATTINY12V-1PU is suitable for a duty-cycled sensor interface that periodically wakes, reads a simple input, updates an output, and returns to power-down operation. Its power-down current of less than 1 µA provides a useful starting point for a low-leakage design, while six I/O ports can accommodate a sensor signal, enable line, and status indicators. The 1 KB Flash limit favors compact state machines rather than complex protocol stacks. Validate the complete battery budget because the sensor, regulator, pull resistors, and wake interval can dominate energy consumption.

💡

LED Sequencing and Indicator Panel

The ATTINY12V-1PU can implement a compact LED sequence, blink pattern, status annunciator, or simple panel controller. Its six I/O ports are sufficient for several indicators when current-limiting resistors and transistor drive stages are used appropriately, and 1 KB of Flash provides adequate room for a compact lookup table and timing routine. The controller's low operating speed is well matched to visual indicators and does not require a high-bandwidth interface. Design the PCB to separate LED return paths from sensitive logic and check each indicator's drive current against the selected I/O configuration.

🔧

Push-Button and Human Interface Controller

The ATTINY12V-1PU works well as a dedicated button, encoder, or switch-interface controller for compact control panels. Its six I/O ports can support several contacts, and its 1 MHz processing rate is more than adequate for debouncing and event handling. The internal EEPROM can retain small configuration values, while Flash holds the interface state machine. Because program memory is limited, keep the firmware focused and avoid general-purpose frameworks. Validate switch bounce timing, active levels, and debounce intervals against the electrical timing characteristics in the manufacturer datasheet.

📺

Simple Signal Generator and Test Fixture

The ATTINY12V-1PU can act as the controller in a low-frequency signal generator, programmable delay fixture, or automated switch-sequencing tester. Its eight-pin package leaves several I/O pins available for the controlled waveform, trigger, and status signals, and the 1 MHz clock supports modest timing-resolution requirements. For higher precision or multiple synchronized outputs, use the ATtiny13A option after reviewing its register and timing behavior. Keep sensitive outputs away from noisy relay drivers and provide a defined reset and programming path on the fixture.

📱

Educational Microcontroller Training Board

The ATTINY12V-1PU is well suited to an educational embedded-development board because its PDIP footprint is easy to socket, probe, and replace. Students can learn GPIO control, firmware download, EEPROM retention, interrupt-driven logic, timers, and low-power operation without a complex development platform. Six I/O ports provide enough connections for switches, LEDs, and a basic sensor while keeping the wiring understandable. Build the board with accessible test points, a labeled programming header, and a robust decoupling arrangement so beginners can troubleshoot hardware and firmware independently.

Récapitulatif des produits recommandés

ATTINY12V-1PC Same-family 8-pin PDIP control alternative Utilisé dans : Industrial Relay and Timing Control, LED Sequencing and Indicator Panel, Educational Microcontroller Training Board ATTINY13A-PU Microchip Technology Utilisé dans : Industrial Relay and Timing Control, LED Sequencing and Indicator Panel, Push-Button and Human Interface Controller, Simple Signal Generator and Test Fixture ATTINY12-8PC Original ATtiny12 family option for firmware review Utilisé dans : Battery-Powered Sensor Interface, Push-Button and Human Interface Controller, Educational Microcontroller Training Board ATTINY13V-10PQ Low-voltage ATtiny migration candidate Utilisé dans : Battery-Powered Sensor Interface, Simple Signal Generator and Test Fixture
What are the key specifications of ATTINY12V-1PU that engineers should know?
The ATTINY12V-1PU is an 8-bit AVR microcontroller with 1 KB of Flash memory, 64 bytes of EEPROM, six I/O ports, and a maximum clock speed of 1 MHz. The manufacturer datasheet identifies an 8-pin PDIP package and a low-power, high-speed CMOS process with fully static operation. Its 1 MHz rating and limited memory make the device best suited to compact control, sequencing, and simple embedded-interface tasks rather than communications-heavy applications.
What is the operating voltage of ATTINY12V-1PU?
The ATTINY12V-1PU supports 2.5 V, 3.3 V, and 5 V operating configurations. According to the manufacturer datasheet, the device uses a low-power, high-speed CMOS process and offers fully static operation. The selected supply voltage must remain compatible with every connected input, output, programming interface, and external component; use the datasheet's electrical-characteristics limits when designing the power rail and decoupling network.
How much memory does ATTINY12V-1PU have?
The ATTINY12V-1PU contains 1 KB of Flash program memory, organized as 512 x 16 words, plus 64 bytes of EEPROM for nonvolatile data. According to the manufacturer datasheet, the device uses the AVR 8-bit RISC architecture. The small memory footprint suits concise firmware and simple state machines, but applications should avoid large libraries, extensive buffering, and features that exceed the available program space.
Where can I download the ATTINY12V-1PU datasheet PDF?
The ATTINY12V-1PU datasheet PDF is available through the product document links on this page and from the listed manufacturer-document resources. The document covers the 8-bit AVR core, 1 KB Flash memory, 64-byte EEPROM, electrical characteristics, low-power modes, and the 8-pin PDIP connection. Use the pin-description table and package drawing in that document when assigning PCB pads and programming-header signals.
Where can I find the ATTINY12V-1PU pinout?
The ATTINY12V-1PU uses an 8-pin PDIP footprint with pins numbered counter-clockwise from the marked end of the package. According to the manufacturer datasheet, the connections include the PB0 through PB5 I/O group, VCC, and GND, with several port pins also serving programming or reset-related functions. Use the manufacturer pin-description table to verify alternate functions before assigning a signal to a multifunction pin.
What can replace ATTINY12V-1PU in an existing 8-pin PDIP design?
ATTINY12V-1PC and ATTINY12-8PC are the closest documented same-package candidates, but each requires a firmware and timing review rather than an unconditional substitution. The former retains the ATTINY12V low-voltage family identity, while the latter belongs to the original ATTINY12 family and is listed at a different operating point. Both use an 8-pin PDIP format, but reset behavior, clock requirements, memory use, and device-specific timing must be checked before replacement.
What is the best Microchip equivalent for ATTINY12V-1PU?
ATTINY12V-1PC is the closest same-package Microchip candidate because it remains in the ATTINY12V family and uses an 8-pin PDIP format. Its availability, operating-temperature grade, and ordering suffix should be confirmed before procurement. If the existing firmware relies on the ATTINY12V-specific 1 MHz operating point, verify clock, brown-out, programming, and peripheral behavior against the manufacturer datasheet rather than relying only on the package match.
ATTINY12V-1PU vs ATTINY12-8PC — which is better for a new design?
ATTINY12V-1PU is the better match when the design specifically targets the ATTINY12V family's 1 MHz operating point and low-voltage operating choices. ATTINY12-8PC is the original ATTINY12-family alternative and may suit designs using its different documented operating conditions. The choice depends on clock timing, firmware compatibility, voltage, temperature grade, and current availability rather than package appearance alone.
ATTINY12V-1PU vs ATTINY13A-PU — can ATTINY13A-PU replace it?
ATTINY13A-PU can be considered as a board-level migration candidate, but it should not be treated as a transparent drop-in replacement. Both devices are 8-bit AVR controllers in 8-pin PDIP packages, while ATTINY13A-PU provides a faster 20 MHz operating point and a different ATtiny13A feature set. Existing ATTINY12V firmware must be checked for timing, register, interrupt, brown-out, and peripheral differences before reuse.
When should I choose ATTINY12V-1PU over ATTINY13A-PU?
Choose ATTINY12V-1PU when a compact design specifically requires the ATTINY12V device's 1 MHz rating, 1 KB Flash memory, and 64-byte EEPROM. Choose ATTINY13A-PU when the application benefits from substantially higher processing speed and the firmware can be adapted to its ATtiny13A peripherals and register behavior. Both use an 8-pin PDIP format, but matching the package does not remove the need for firmware and timing verification.
Is ATTINY12V-1PU suitable for a battery-powered sensor controller?
The ATTINY12V-1PU is suitable for a low-duty-cycle sensor controller when its 1 KB program-memory limit is sufficient and the design can use power-down operation. The manufacturer datasheet specifies power-down current below 1 µA, while active current is 2.2 mA at 4 MHz and 3 V at 25 °C. Actual battery life depends on wake frequency, sensor load, regulator quiescent current, and the time spent executing between sleep events.
How much current does ATTINY12V-1PU consume in low-power modes?
The ATTINY12V-1PU consumes less than 1 µA in power-down mode under the manufacturer datasheet conditions. The same document lists active current of 2.2 mA and idle current of 0.5 mA at 4 MHz, 3 V, and 25 °C. These figures provide design guidance, but a power budget should use the operating conditions closest to the finished product, including external sensor, pull-up, indicator, and regulator loads.
Is ATTINY12V-1PU in stock and what is its lead time?
Current inventory and lead time for ATTINY12V-1PU are handled through the Request a Quote form on this page. The Request a Quote workflow should be used to confirm the exact suffix, packaging, quantity, delivery date, and shipment destination. This avoids relying on stale marketplace availability figures and lets procurement respond to the requested configuration directly.
Where can I buy ATTINY12V-1PU online?
Use the Request a Quote form on this page to request ATTINY12V-1PU by its complete manufacturer part number. Include the required quantity, tube packaging preference, destination, and target delivery date in the request. The form is the appropriate channel for confirming current supply, order handling, and shipment scheduling without exposing a static, potentially outdated price or lead-time statement.
Does ATTINY12V-1PU support RoHS and automotive qualification?
The ATTINY12V-1PU is listed as active, but its RoHS, REACH, and AEC-Q100 classifications must be confirmed for the exact ordering code before production release. Use the manufacturer product documentation and your supplier's declaration-of-conformance records to establish compliance. The standard PDIP industrial ordering suffix should not be assumed to provide automotive qualification without that explicit classification.

Données de référence d'ingénierie pour ATTINY12V-1PU — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ATTINY12V-1PU when the design specifically requires the ATTINY12V family's 1 MHz operating point, 1 KB Flash memory, 64-byte EEPROM, and 8-pin PDIP package. ATTINY12V-1PC is the closest same-family candidate for an existing board, subject to ordering-grade and availability confirmation. ATTINY12-8PC can be considered for an original ATTINY12-family design, but its voltage, timing, and firmware requirements need review. ATTINY13A-PU is appropriate when the extra processing speed is useful and the firmware will be adapted to the ATtiny13A peripheral set. ATTINY13V-10PQ offers a 10 MHz low-voltage migration path, but its increased clock rate changes timing assumptions. For every alternative, verify the pin functions, reset behavior, programming method, operating voltage, and watchdog or brown-out configuration before production use.

Comparaison avec les alternatives

Paramètre Ce produit ATTINY12V-1PC ATTINY12-8PC ATTINY13A-PU ATTINY13V-10PQ
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Family ATTINY12V ATTINY12V ATTINY12 ATTINY13A ATTINY13V
Core Processor 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR 8-bit AVR

Principaux différenciateurs

  • Direct ATTINY12V operating-point match (vs ATTINY12V-1PC)
  • Lower clock rate supports straightforward legacy timing (vs ATTINY13A-PU)
  • Matched package with a different family migration path (vs ATTINY13V-10PQ)
  • Low-power operation supports compact embedded control (vs ATTINY13A-PU)

Notes de conception

Place the supply decoupling capacitor immediately between the VCC and GND pins, with a short, low-inductance return path. Keep the programming connector, reset connection, and sensor inputs away from relay-coil and switching-device traces. The 8-pin PDIP footprint has adequate spacing for hand assembly, but the PCB still needs a defined keep-out around the body and appropriate pin-one marking for error-free placement.

Do not assume that equal package dimensions make every ATtiny variant a transparent firmware replacement. The ATTINY13A-PU operates at up to 20 MHz and the ATTINY13V-10PQ operates at up to 10 MHz, so delay loops, timer assumptions, startup behavior, and peripheral configuration may require revision. Rebuild and test the complete firmware before using either candidate in an ATTINY12V-1PU design.

Calculate the complete system current from the MCU, pull resistors, sensors, indicators, and any driver transistors rather than relying on the controller's active-current value alone. For a battery design, measure the sleep interval and wake duration because the controller's less-than-1-µA power-down figure excludes external loads. Select the supply rail so every input and output remains within the selected operating-voltage configuration.

Route the reset and programming signals away from noisy switching nodes and preserve a short ground reference beneath the controller area. If the device controls relays or solenoids, use flyback protection and separate return-current paths so inductive transients do not cross the MCU's supply and input nets. A ground plane is helpful, but sensitive return currents should not flow through the paths used by high-current outputs.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The device is listed as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals classifications were not identified for the exact ordering code and require confirmation before production release.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

ATTINY12V-1PU ATTINY12V-1PU datasheet ATTINY12V-1PU datasheet pdf ATTINY12V-1PU pinout ATTINY12V-1PU specifications Microchip ATTINY12V-1PU ATTINY12V-1PU equivalent ATTINY12V-1PU replacement ATTINY12V-1PU vs ATTINY13A-PU ATTINY12V-1PU 8-pin PDIP ATTINY12V-1PU price ATTINY12V-1PU stock

Composants & termes associés

Microchip Technology ATTINY12V-1PU ATTINY12V-1PC ATTINY12-8PC ATTINY13A-PU ATTINY13V-10PQ ATtiny AVR AVR RISC architecture 8-bit microcontroller embedded microcontroller Flash program memory EEPROM general-purpose I/O PDIP-8 through-hole package surface-mount alternative power-down mode low-power CMOS industrial control battery-powered sensor controller LED sequencing human interface controller
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ