ATTINY12V-1PU - 8-Bit 1MHz AVR MCU | Microchip
MPN: ATTINY12V-1PU ✓ نشطATTINY12V-1PU نظرة عامة
An 8-bit microcontroller is a compact processor designed around an 8-bit data path for embedded control rather than desktop computing. The ATTINY12 belongs to the ATtiny hierarchy within AVR microcontrollers, combining a CPU core, nonvolatile program memory, data EEPROM, and general-purpose I/O in one package. This integration allows a small controller to sense inputs, execute embedded logic, and operate outputs without a separate processor or memory device.
The ATTINY12V-1PU provides 1 KB of Flash memory for firmware, 64 bytes of EEPROM for retained data, and six I/O ports. Its low-power CMOS implementation supports operation across the device's stated supply-voltage options of 2.5 V, 3.3 V, and 5 V. The device uses the AVR instruction architecture and is suitable for simple sequencing, logic, debouncing, signal generation, and compact peripheral-control functions where memory and processing requirements are modest.
At the system level, the microcontroller's small footprint makes it useful in prototypes, automation modules, educational boards, and dedicated appliance controls. The PDIP format is particularly convenient for breadboards, fixture-based programming, and low-volume fabrication because its 0.300-inch pitch provides generous spacing between pins. Unlike fine-pitch surface-mount packages, the through-hole body is straightforward to inspect and rework.
Typical uses include relay timing, LED indication, push-button interfaces, simple sensor conditioning, low-speed control loops, and compact embedded logic modules. Because the device has only 1 KB of program memory, applications should use concise firmware, avoid unnecessary library overhead, and keep buffering or computation requirements modest.
PCB design should provide a stable decoupling capacitor near the supply pin, preserve adequate ground-return paths, and keep switching or high-current outputs separated from sensitive input traces. Confirm oscillator, reset, programming, and I/O requirements against the manufacturer datasheet before finalizing the schematic or PCB footprint.
This page combines the device specifications, pin-level guidance, application context, verified drop-in candidates, and practical implementation notes needed to evaluate the ATTINY12V-1PU before schematic capture or sourcing.
بدائل مباشرة لـ ATTINY12V-1PU — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع ATTINY12V-1PU (نفس عامل الشكل والبصمة) — يختلف في Maximum Clock Frequency, Mounting Type, Process Technology.
ATTINY12V-1PC
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATTINY12-8PC
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATTINY13A-PU
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←ATTINY13V-10PQ
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
ATTINY12V-1PU الحدود القصوى والخصائص الكهربائية
| Product Type | 8-bit AVR RISC microcontroller |
| Program Memory | 1 KB Flash |
| Program Memory Organization | 512 x 16 words |
| EEPROM Memory | 64 bytes |
| أقصى تردد للساعة | 1 MHz |
| CPU Architecture | AVR 8-bit RISC |
| I/O Port Count | 6 ports |
| Supply Voltage Options | 2.5 V, 3.3 V, or 5 V |
| Active Current at 4 MHz and 3 V | 2.2 mA at 25 °C |
| Idle Current at 4 MHz and 3 V | 0.5 mA at 25 °C |
| Power-Down Current | Less than 1 µA |
| Package Type | 8-pin PDIP |
| Package Body Width | 0.300 inch, 7.62 mm |
| Package Pitch | 0.100 inch, 2.54 mm |
| نوع التركيب | Through-hole dual in-line |
| Process Technology | Low-power, high-speed CMOS |
| Operating Mode | Fully static |
| حالة دورة الحياة | Active |
تكوين أطراف ATTINY12V-1PU
| دبوس 1 | PB0/MOSI/DI/SDA — Port B0 input/output with programming and serial-data functions |
| دبوس 2 | PB1/MISO — Port B1 input/output with programming clock function |
| دبوس 3 | PB2/OC1A/PCINT2 — Port B2 input/output with timer output and pin-change interrupt functions |
| دبوس 4 | PB3/PCINT3 — Port B3 input/output with pin-change interrupt function |
| دبوس 5 | GND — Ground supply connection |
| دبوس 6 | PB4/RESET — Port B4 input/output and reset function |
| دبوس 7 | PB5 — Port B5 input/output |
| دبوس 8 | VCC — Positive supply voltage connection |
التطبيقات النموذجية
ATTINY12V-1PU مناسب لـ 6 التطبيقs: Industrial Relay and Timing Control, Battery-Powered Sensor Interface, LED Sequencing and Indicator Panel, Push-Button and Human Interface Controller, Simple Signal Generator and Test Fixture, Educational Microcontroller Training Board.
Industrial Relay and Timing Control
The ATTINY12V-1PU fits compact relay-control and timing modules where six I/O ports, 1 KB of Flash memory, and a 1 MHz clock are sufficient. It can encode button states, manage a relay sequence, drive status indicators, and debounce external contacts without a larger processor. The 8-pin PDIP package simplifies point-to-point wiring and prototype rework, while the low-power operating modes help reduce energy use during long idle periods. Before finalizing the board, confirm that relay-driver transients do not corrupt supply or I/O signals and verify timing against the selected ATtiny12V operating point.
موصى به
Battery-Powered Sensor Interface
The ATTINY12V-1PU is suitable for a duty-cycled sensor interface that periodically wakes, reads a simple input, updates an output, and returns to power-down operation. Its power-down current of less than 1 µA provides a useful starting point for a low-leakage design, while six I/O ports can accommodate a sensor signal, enable line, and status indicators. The 1 KB Flash limit favors compact state machines rather than complex protocol stacks. Validate the complete battery budget because the sensor, regulator, pull resistors, and wake interval can dominate energy consumption.
موصى به
LED Sequencing and Indicator Panel
The ATTINY12V-1PU can implement a compact LED sequence, blink pattern, status annunciator, or simple panel controller. Its six I/O ports are sufficient for several indicators when current-limiting resistors and transistor drive stages are used appropriately, and 1 KB of Flash provides adequate room for a compact lookup table and timing routine. The controller's low operating speed is well matched to visual indicators and does not require a high-bandwidth interface. Design the PCB to separate LED return paths from sensitive logic and check each indicator's drive current against the selected I/O configuration.
موصى به
Push-Button and Human Interface Controller
The ATTINY12V-1PU works well as a dedicated button, encoder, or switch-interface controller for compact control panels. Its six I/O ports can support several contacts, and its 1 MHz processing rate is more than adequate for debouncing and event handling. The internal EEPROM can retain small configuration values, while Flash holds the interface state machine. Because program memory is limited, keep the firmware focused and avoid general-purpose frameworks. Validate switch bounce timing, active levels, and debounce intervals against the electrical timing characteristics in the manufacturer datasheet.
موصى به
Simple Signal Generator and Test Fixture
The ATTINY12V-1PU can act as the controller in a low-frequency signal generator, programmable delay fixture, or automated switch-sequencing tester. Its eight-pin package leaves several I/O pins available for the controlled waveform, trigger, and status signals, and the 1 MHz clock supports modest timing-resolution requirements. For higher precision or multiple synchronized outputs, use the ATtiny13A option after reviewing its register and timing behavior. Keep sensitive outputs away from noisy relay drivers and provide a defined reset and programming path on the fixture.
موصى به
Educational Microcontroller Training Board
The ATTINY12V-1PU is well suited to an educational embedded-development board because its PDIP footprint is easy to socket, probe, and replace. Students can learn GPIO control, firmware download, EEPROM retention, interrupt-driven logic, timers, and low-power operation without a complex development platform. Six I/O ports provide enough connections for switches, LEDs, and a basic sensor while keeping the wiring understandable. Build the board with accessible test points, a labeled programming header, and a robust decoupling arrangement so beginners can troubleshoot hardware and firmware independently.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ ATTINY12V-1PU — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | ATTINY12V-1PC | ATTINY12-8PC | ATTINY13A-PU | ATTINY13V-10PQ |
|---|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Family | ATTINY12V | ATTINY12V | ATTINY12 | ATTINY13A | ATTINY13V |
| Core Processor | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR |
أبرز الفروقات
- Direct ATTINY12V operating-point match (مقابلATTINY12V-1PC)
- Lower clock rate supports straightforward legacy timing (مقابلATTINY13A-PU)
- Matched package with a different family migration path (مقابلATTINY13V-10PQ)
- Low-power operation supports compact embedded control (مقابلATTINY13A-PU)
ملاحظات التصميم
Place the supply decoupling capacitor immediately between the VCC and GND pins, with a short, low-inductance return path. Keep the programming connector, reset connection, and sensor inputs away from relay-coil and switching-device traces. The 8-pin PDIP footprint has adequate spacing for hand assembly, but the PCB still needs a defined keep-out around the body and appropriate pin-one marking for error-free placement.
Do not assume that equal package dimensions make every ATtiny variant a transparent firmware replacement. The ATTINY13A-PU operates at up to 20 MHz and the ATTINY13V-10PQ operates at up to 10 MHz, so delay loops, timer assumptions, startup behavior, and peripheral configuration may require revision. Rebuild and test the complete firmware before using either candidate in an ATTINY12V-1PU design.
Calculate the complete system current from the MCU, pull resistors, sensors, indicators, and any driver transistors rather than relying on the controller's active-current value alone. For a battery design, measure the sleep interval and wake duration because the controller's less-than-1-µA power-down figure excludes external loads. Select the supply rail so every input and output remains within the selected operating-voltage configuration.
Route the reset and programming signals away from noisy switching nodes and preserve a short ground reference beneath the controller area. If the device controls relays or solenoids, use flyback protection and separate return-current paths so inductive transients do not cross the MCU's supply and input nets. A ground plane is helpful, but sensitive return currents should not flow through the paths used by high-current outputs.
معلومات الامتثال
The device is listed as active. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals classifications were not identified for the exact ordering code and require confirmation before production release.