ATTINY1626-XF - 20MHz AVR Microcontroller | Microchip Technology
Référence : ATTINY1626-XF ✓ ActifATTINY1626-XF Présentation
An AVR microcontroller is an embedded semiconductor that integrates a processor core, program memory, data memory, and peripherals into one compact device. The tinyAVR 2 family occupies the small-footprint end of the Microchip AVR portfolio, where the ATTINY1626 provides more memory, timing resources, and analog capability than a basic 8-bit controller while remaining suitable for compact control systems.
Core features include 20 MHz operation, 16 KB of Flash for firmware, 2 KB of SRAM for working data, and 256 bytes of nonvolatile EEPROM. The 12-bit differential ADC and Programmable Gain Amplifier support measurements from low-level sensors, while the hardware multiplier accelerates suitable multiplication operations. The Event System enables deterministic peripheral signaling and reduces reliance on software polling.
The ATTINY1626 uses the AVR CPU architecture and supports peripheral resources associated with the tinyAVR 2 family. Its 20-pin SSOP construction offers a practical balance between board area and available I/O. The 1.8 V to 5.5 V operating range permits use across low-voltage and conventional supply systems, while the -40°C to 125°C industrial temperature range supports demanding ambient environments.
Typical uses include compact industrial control modules, sensor-interface nodes, programmable timers, monitoring equipment, building controls, and low-power consumer devices. The differential ADC and PGA are particularly useful when a design must acquire small analog signals without relying on a separate converter. The Event System can coordinate timing-sensitive internal functions where deterministic interrupt-driven behavior is preferred.
When designing a board, follow the manufacturer pin-description and decoupling guidance in data sheet DS40002234B. Preserve the SSOP-20 land pattern, route sensitive analog inputs away from fast-switching nodes, and provide local supply bypassing. Confirm the programmed clock, peripheral pins, and package orientation before releasing a PCB because migrating among tinyAVR 2 devices can alter the available pin count even when code remains compatible.
This page combines the manufacturer specifications, practical application guidance, package details, sourcing information, and verified drop-in comparison options. It also identifies the limits of direct substitution, helping engineers distinguish electrically similar devices from parts that can replace ATTINY1626-XF without changing the PCB.
Alternatives de remplacement direct pour ATTINY1626-XF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
ATTINY1626-SU
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →ATTINY1626-SUR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATTINY1626-XF Valeurs maximales et caractéristiques électriques
| CPU Architecture | 8-bit AVR |
| Fréquence d'horloge maximale | 20 MHz |
| Program Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bytes |
| SRAM | 2 KB |
| EEPROM | 256 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Boîtier | 20-pin SSOP |
| Nombre de broches | 20 pins |
| Maximum Operating Temperature | 125°C |
| ADC Resolution | 12-bit differential |
| Programmable Gain Amplifier | Yes |
| Event System | Yes |
| Hardware Multiplier | Yes |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
Guide de configuration des broches du ATTINY1626-XF 20-pin ssop
Configuration des broches du ATTINY1626-XF (boîtier 20-pin ssop). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATTINY1626-XF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATTINY1626-XF convient pour 6 applications: Industrial Sensor-Control Nodes, Programmable Timers and Sequencers, Building and HVAC Controls, Battery-Powered Monitoring Devices, Compact Data-Acquisition Modules, Embedded Control and Communication Hubs.
Industrial Sensor-Control Nodes
The ATTINY1626-XF suits compact industrial sensor nodes that need local acquisition, deterministic control, and network-interface supervision without a larger processor. Its 12-bit differential ADC with Programmable Gain Amplifier can process low-level sensor signals, while 20 MHz execution provides enough headroom for filtering, calibration, and control logic. The 2 KB SRAM supports working buffers and protocol state, and 256 bytes of EEPROM retains small configuration values. Place the microcontroller beside the sensor analog section, use short grounded routes for differential inputs, and keep the 1.8 V to 5.5 V supply within the device limits.
Recommandé
Programmable Timers and Sequencers
The ATTINY1626-XF is appropriate for programmable timers, sequencers, and equipment-control panels where several timed outputs must operate from one controller. The 20 MHz AVR core and Event System support efficient event-driven sequencing, while the hardware multiplier assists arithmetic used in interval and frequency calculations. Sixteen kilobytes of Flash is sufficient for structured control firmware, and the 256-byte EEPROM can preserve timing or operating-mode settings. For reliable sequencing, define event priorities in firmware, provide adequate supply bypassing at the device, and verify every output transition against the timing requirements of the target machinery.
Recommandé
Building and HVAC Controls
The ATTINY1626-XF can serve as the local controller in a room control, ventilation, or small HVAC interface module. Its 1.8 V to 5.5 V operating range supports both low-voltage sensor domains and common embedded supply levels, while the differential ADC is useful for temperature, pressure, or flow sensing. The Event System helps coordinate periodic sensing with actuator updates, and 2 KB of RAM is suitable for modest control-state storage. Design the board with separate clean analog and digital return paths, and check actuator-interface isolation rather than driving loads directly from microcontroller pins.
Recommandé
Battery-Powered Monitoring Devices
The ATTINY1626-XF is useful in battery-powered monitors because it combines 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a compact SSOP-20 package. The AVR platform allows firmware to use low-power operating modes between measurement events, and the 1.8 V minimum operating voltage supports low-voltage supply designs. The differential ADC can monitor sensors near the bottom of the supply range when the signal and common-mode limits are respected. Establish a clear sleep-and-wake schedule, remove board leakage where battery life matters, and confirm brownout behavior before deployment.
Recommandé
Compact Data-Acquisition Modules
The ATTINY1626-XF can form the core of a compact data-acquisition module that converts differential analog inputs into values used by a host processor. Its 12-bit differential ADC and Programmable Gain Amplifier reduce the need for separate analog conditioning when the source signals fall within the device's input range. Twenty megahertz processing supports sampling control, filtering, and packet preparation, while 2 KB of SRAM accommodates sample buffers and protocol state. Use short, symmetric analog routing, a quiet reference arrangement, and input filtering selected for the sensor bandwidth.
Recommandé
Embedded Control and Communication Hubs
The ATTINY1626-XF is suitable for a small embedded hub that gathers local digital inputs, executes control logic, and forwards status through a serial interface. Its 20 MHz core provides ample timing margin for protocol handling, while the Event System can organize peripheral events without continuous software polling. The SSOP-20 footprint preserves board area for systems needing several discrete functions in a compact assembly. Allocate pins according to the manufacturer pin table, isolate externally accessible signal paths, and validate timing margins at the highest intended peripheral or serial activity.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATTINY1626-XF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATTINY1626-SU | ATTINY1626-SUR |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SSOP-20 | SSOP-20 - same | SSOP-20 - same |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| Program Flash Memory | 16 KB | 16 KB | 16 KB |
| SRAM | 2 KB | 2 KB | 2 KB |
| EEPROM | 256 bytes | 256 bytes | 256 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| ADC | 12-bit differential ADC with Programmable Gain Amplifier | 12-bit differential ADC with Programmable Gain Amplifier | 12-bit differential ADC with Programmable Gain Amplifier |
| Order-Code Designation | ATTINY1626-XF | ATTINY1626-SU | ATTINY1626-SUR |
Principaux différenciateurs
- Retains the full ATTINY1626 performance profile in the verified SSOP-20 alternatives (vs ATTINY1626-SU)
- Combines 20 MHz control with integrated differential analog acquisition (vs ATTINY1626-SUR)
- Compact 20-pin SSOP implementation with industrial temperature capability (vs ATTINY1626-SU)
Notes de conception
Use the manufacturer SSOP-20 land pattern and confirm the pin-1 orientation against the package drawing before fabrication. Place the MCU close to the local input, output, and decoupling connections so switching-node and analog-signal paths do not share vulnerable return segments. The operating range of 1.8 V to 5.5 V should be checked against every connected peripheral so an off-state input or pull network cannot force a pin beyond the device's limits.
Route the differential ADC inputs as a short, symmetric pair with a continuous ground reference beneath them, and keep switching regulators, high-current relays, and digital clock lines away from this region. If the analog source has a wide bandwidth, add source filtering that preserves the required measurement response while limiting high-frequency interference. Evaluate common-mode voltage and input range against DS40002234B before selecting the Programmable Gain Amplifier gain.
Provide local decoupling at the supply pins using the capacitance and placement specified in Microchip Technology data sheet DS40002234B. Keep the power path narrow enough to limit transient current in the loop while maintaining sufficient copper for the expected operating current. If the module runs from a battery or low-voltage source, verify startup, brownout, and sleep-mode behavior over the full source range rather than assuming a nominal voltage is sufficient.
Do not confuse the ATTINY1626-XF order code with another package or temperature-grade option until the package drawing and grade markings are checked. Firmware also must match the selected device's memory size, clock configuration, and pin assignments. A programmer configured for an ATmega328P or another ATtiny device can produce incorrect target signatures or timing. Run the device-specific clock and peripheral checks after programming, especially on a reused board.
Informations de conformité
The LCSC product listing identifies ATTINY1626-XF as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is shown for the exact part.