Microchip Technology

ATTINY1626-XF - 20MHz AVR Microcontroller | Microchip Technology

部品番号: ATTINY1626-XF ✓ 生産中
1.8 V to 5.5 V Vdss 20-pin SSOP Package 20 MHz Speed 16 KB Memory
MOQ: 1 |

ATTINY1626-XF 概要

The Microchip Technology ATTINY1626-XF is an 8-bit AVR tinyAVR 2 microcontroller with a 20 MHz maximum clock, 16 KB of Flash memory, 2 KB of SRAM, and 256 bytes of EEPROM in a 20-pin SSOP package. It operates from 1.8 V to 5.5 V and is specified for industrial operation up to 125°C. The device combines an AVR CPU with a hardware multiplier, an Event System, and accurate analog peripherals including a 12-bit differential ADC with Programmable Gain Amplifier.

An AVR microcontroller is an embedded semiconductor that integrates a processor core, program memory, data memory, and peripherals into one compact device. The tinyAVR 2 family occupies the small-footprint end of the Microchip AVR portfolio, where the ATTINY1626 provides more memory, timing resources, and analog capability than a basic 8-bit controller while remaining suitable for compact control systems.

Core features include 20 MHz operation, 16 KB of Flash for firmware, 2 KB of SRAM for working data, and 256 bytes of nonvolatile EEPROM. The 12-bit differential ADC and Programmable Gain Amplifier support measurements from low-level sensors, while the hardware multiplier accelerates suitable multiplication operations. The Event System enables deterministic peripheral signaling and reduces reliance on software polling.

The ATTINY1626 uses the AVR CPU architecture and supports peripheral resources associated with the tinyAVR 2 family. Its 20-pin SSOP construction offers a practical balance between board area and available I/O. The 1.8 V to 5.5 V operating range permits use across low-voltage and conventional supply systems, while the -40°C to 125°C industrial temperature range supports demanding ambient environments.

Typical uses include compact industrial control modules, sensor-interface nodes, programmable timers, monitoring equipment, building controls, and low-power consumer devices. The differential ADC and PGA are particularly useful when a design must acquire small analog signals without relying on a separate converter. The Event System can coordinate timing-sensitive internal functions where deterministic interrupt-driven behavior is preferred.

When designing a board, follow the manufacturer pin-description and decoupling guidance in data sheet DS40002234B. Preserve the SSOP-20 land pattern, route sensitive analog inputs away from fast-switching nodes, and provide local supply bypassing. Confirm the programmed clock, peripheral pins, and package orientation before releasing a PCB because migrating among tinyAVR 2 devices can alter the available pin count even when code remains compatible.

This page combines the manufacturer specifications, practical application guidance, package details, sourcing information, and verified drop-in comparison options. It also identifies the limits of direct substitution, helping engineers distinguish electrically similar devices from parts that can replace ATTINY1626-XF without changing the PCB.

ドロップイン代替品: ATTINY1626-XF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ATTINY1626-SU

✅ ドロップイン
Microchip Technology
📦 SSOP-20
8-bit AVR tinyAVR 2 microcontroller · 20 MHz · AVR with hardware multiplier · 16 KB · 2 KB · 256 bytes · 20-pin SOIC

価格はお問い合わせください

データシートを見る →

ATTINY1626-SUR

✅ ドロップイン
📦 SSOP-20
Order-code designation differs from ATTINY1626-XF; identified performance remains 20 MHz, 16 KB Flash, 2 KB SRAM, and 256-byte EEPROM

📋 参考代替品(カタログ未掲載)

ATTINY1626-XF 最大定格&電気的特性

CPU Architecture 8-bit AVR
最大クロック周波数 20 MHz
Program Flash Memory 16 KB
Flash Organization 16K x 8 bytes
SRAM 2 KB
EEPROM 256 bytes
Operating Voltage Range 1.8 V to 5.5 V
パッケージ 20-pin SSOP
ピン数 20 pins
Maximum Operating Temperature 125°C
ADC Resolution 12-bit differential
Programmable Gain Amplifier Yes
Event System Yes
Hardware Multiplier Yes
実装タイプ Surface mount
RoHS ステータス Compliant

ATTINY1626-XF 20-pin ssop ピン配置ガイド

ATTINY1626-XF (20-pin ssop パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

ATTINY1626-XF の 20-pin ssop パッケージピン配置図

詳細なピン配置データはありません: ATTINY1626-XF.

詳細は データシート をご参照ください。

主な用途

ATTINY1626-XF の用途: 6 件s: Industrial Sensor-Control Nodes, Programmable Timers and Sequencers, Building and HVAC Controls, Battery-Powered Monitoring Devices, Compact Data-Acquisition Modules, Embedded Control and Communication Hubs.

🏭

Industrial Sensor-Control Nodes

The ATTINY1626-XF suits compact industrial sensor nodes that need local acquisition, deterministic control, and network-interface supervision without a larger processor. Its 12-bit differential ADC with Programmable Gain Amplifier can process low-level sensor signals, while 20 MHz execution provides enough headroom for filtering, calibration, and control logic. The 2 KB SRAM supports working buffers and protocol state, and 256 bytes of EEPROM retains small configuration values. Place the microcontroller beside the sensor analog section, use short grounded routes for differential inputs, and keep the 1.8 V to 5.5 V supply within the device limits.

⏱️

Programmable Timers and Sequencers

The ATTINY1626-XF is appropriate for programmable timers, sequencers, and equipment-control panels where several timed outputs must operate from one controller. The 20 MHz AVR core and Event System support efficient event-driven sequencing, while the hardware multiplier assists arithmetic used in interval and frequency calculations. Sixteen kilobytes of Flash is sufficient for structured control firmware, and the 256-byte EEPROM can preserve timing or operating-mode settings. For reliable sequencing, define event priorities in firmware, provide adequate supply bypassing at the device, and verify every output transition against the timing requirements of the target machinery.

🏠

Building and HVAC Controls

The ATTINY1626-XF can serve as the local controller in a room control, ventilation, or small HVAC interface module. Its 1.8 V to 5.5 V operating range supports both low-voltage sensor domains and common embedded supply levels, while the differential ADC is useful for temperature, pressure, or flow sensing. The Event System helps coordinate periodic sensing with actuator updates, and 2 KB of RAM is suitable for modest control-state storage. Design the board with separate clean analog and digital return paths, and check actuator-interface isolation rather than driving loads directly from microcontroller pins.

🔋

Battery-Powered Monitoring Devices

The ATTINY1626-XF is useful in battery-powered monitors because it combines 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a compact SSOP-20 package. The AVR platform allows firmware to use low-power operating modes between measurement events, and the 1.8 V minimum operating voltage supports low-voltage supply designs. The differential ADC can monitor sensors near the bottom of the supply range when the signal and common-mode limits are respected. Establish a clear sleep-and-wake schedule, remove board leakage where battery life matters, and confirm brownout behavior before deployment.

📟

Compact Data-Acquisition Modules

The ATTINY1626-XF can form the core of a compact data-acquisition module that converts differential analog inputs into values used by a host processor. Its 12-bit differential ADC and Programmable Gain Amplifier reduce the need for separate analog conditioning when the source signals fall within the device's input range. Twenty megahertz processing supports sampling control, filtering, and packet preparation, while 2 KB of SRAM accommodates sample buffers and protocol state. Use short, symmetric analog routing, a quiet reference arrangement, and input filtering selected for the sensor bandwidth.

🖥️

Embedded Control and Communication Hubs

The ATTINY1626-XF is suitable for a small embedded hub that gathers local digital inputs, executes control logic, and forwards status through a serial interface. Its 20 MHz core provides ample timing margin for protocol handling, while the Event System can organize peripheral events without continuous software polling. The SSOP-20 footprint preserves board area for systems needing several discrete functions in a compact assembly. Allocate pins according to the manufacturer pin table, isolate externally accessible signal paths, and validate timing margins at the highest intended peripheral or serial activity.

What are the key specifications of ATTINY1626-XF that engineers should know?
The ATTINY1626-XF combines a 20 MHz 8-bit AVR core with 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a 20-pin SSOP package. According to Microchip Technology data sheet DS40002234B, it also includes a hardware multiplier, an Event System, and a 12-bit differential ADC with a Programmable Gain Amplifier. Its stated operating-voltage range is 1.8 V to 5.5 V, with industrial-temperature operation up to 125°C.
Where can I download the ATTINY1626 datasheet PDF?
The official ATTINY1626 data sheet PDF is available from Microchip Technology as DS40002234B, covering the ATtiny1624, ATtiny1626, and ATtiny1627 family. The document contains the package options, pin descriptions, memory organization, electrical characteristics, and peripheral information needed for circuit design. Use the manufacturer's document for authoritative pin assignments and operating limits rather than relying on a distributor summary.
What is the ATTINY1626 microcontroller?
The ATTINY1626 is an 8-bit AVR tinyAVR 2 microcontroller designed for compact embedded-control applications. According to Microchip Technology data sheet DS40002234B, it runs at up to 20 MHz and provides 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM. Its event-driven peripherals and 12-bit differential ADC make it suitable for control, timing, sensing, and monitoring products that need more capability than a basic eight-bit MCU.
Is ATTINY1626 suitable for an ATTINY1626 development board?
Yes, the ATTINY1626 can be used on a development board that provides its required power, programming interface, clock arrangement, and accessible GPIO pins. Because the ATTINY1626-XF is supplied in the SSOP-20 package, the board must accommodate that land pattern rather than a VQFN or SOIC footprint. Follow Microchip Technology's device documentation for the exact pin functions and programming signals used by the board.
Can ATTINY1626 be used with Arduino?
The ATTINY1626 can be used in Arduino-compatible projects when the board, core definition, programmer, and firmware are configured for the AVR family and the ATTINY1626's 16 KB Flash and 2 KB SRAM limits. Programmers must select the correct device signature and clock configuration rather than assuming settings for an ATmega328P. The SSOP-20 ATTINY1626-XF also requires a suitable adapter or breakout because it is not a standard DIP footprint.
How is the ATTINY1626 programmed?
The ATTINY1626 is programmed through its AVR programming interface, using a compatible programmer such as an ISP-capable tool and the appropriate Microchip programming software. The device's 16 KB Flash is organized as 16K x 8 bytes, while 2 KB of SRAM is available for runtime data. Programming parameters and connector assignments should follow the exact board schematic and the programming guidance in DS40002234B.
What is the price of ATTINY1626-XF?
The current price of ATTINY1626-XF should be requested through the Request a Quote form on this page because commercial pricing can change with quantity, availability, and market conditions. The part is identified by Microchip Technology as an AVR tinyAVR 2 microcontroller in a 20-pin SSOP package. The form lets you request the appropriate quantity tier without relying on a stale static price.
What is the lead time for ATTINY1626-XF?
The current lead time for ATTINY1626-XF should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package allocation, and current factory and distribution status. For production planning, provide the required quantity, target date, and preferred shipping information in the quote request so the current schedule can be evaluated against the project timeline.
Is ATTINY1626-XF in stock?
Current ATTINY1626-XF stock should be checked through the Request a Quote form on this page. The manufacturer lists the ATTINY1626 family in SSOP, SOIC, and 3 x 3 mm VQFN packages, but package-specific inventory must be confirmed separately. A quote request allows the exact ATTINY1626-XF order code, quantity, and delivery requirements to be checked without treating another package variant as an available substitute.
ATTINY1626-XF vs ATTINY1626-SUR - which is better for my design?
ATTINY1626-XF and ATTINY1626-SUR provide the same core ATTINY1626 performance and are both identified as 20-pin SSOP devices in the comparison information. The difference is the manufacturer's order-code or packaging designation, so either may suit the same electrical design when its mechanical details match the PCB. Confirm the package drawing, pin orientation, and ordering code before treating one as a replacement for the other.
When should I choose ATTINY1626-XF over another tinyAVR device?
Choose ATTINY1626-XF when a design needs the 20-pin SSOP footprint together with 20 MHz AVR performance, 16 KB of Flash, 2 KB of SRAM, and 256 bytes of EEPROM. Its 12-bit differential ADC, Programmable Gain Amplifier, hardware multiplier, and Event System add useful capability to a compact controller. Choose another family member instead when fewer pins, different memory capacity, or a different package better matches the board.
Is ATTINY1626-XF suitable for industrial sensor-control equipment?
The ATTINY1626-XF is suitable for industrial sensor-control equipment when the design stays within its 1.8 V to 5.5 V supply range and 125°C maximum operating temperature. The 12-bit differential ADC and Programmable Gain Amplifier are valuable for low-level analog front ends, while the Event System supports deterministic peripheral coordination. Environmental, isolation, calibration, and functional-safety requirements still need to be assessed separately for the finished equipment.
What is the best drop-in replacement for ATTINY1626-XF?
The closest verified drop-in choices are ATTINY1626-SU and ATTINY1626-SUR because the comparison identifies the same 20-pin SSOP format, 16 KB program memory, 2 KB SRAM, 256-byte EEPROM, and 20-pin count. No fully substantiated five-part drop-in list is available for this exact order code. Verify the package drawing, pin table, clock settings, and order-code suffix before committing a replacement to production.
What can replace ATTINY1626-XF?
A suitable replacement for ATTINY1626-XF must retain the 20-pin SSOP land pattern and remain electrically compatible at 20 MHz and 1.8 V to 5.5 V, with 16 KB Flash, 2 KB SRAM, and 256-byte EEPROM. ATTINY1626-SU and ATTINY1626-SUR are the verified direct candidates. Another tinyAVR 2 member may be code-compatible, but a difference in pin count or package prevents it from being a true drop-in replacement.
Is there a cross-brand drop-in equivalent for ATTINY1626-XF?
No cross-brand drop-in equivalent is established for the ATTINY1626-XF by the available cross-reference information. An equivalent MCU must match the SSOP-20 footprint, pin functions, 20 MHz clock capability, 1.8 V to 5.5 V supply range, memory organization, and programming ecosystem; matching only the clock rate is insufficient. Use the Microchip ATtiny1626-family documentation to validate any proposed substitute before modifying a PCB.

エンジニアリング参考データ: ATTINY1626-XF — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ATTINY1626-XF when the PCB requires the exact Microchip Technology order code, an SSOP-20 footprint, 20 MHz AVR execution, 16 KB of Flash, 2 KB of SRAM, and industrial-temperature capability. ATTINY1626-SU and ATTINY1626-SUR are the verified direct alternatives when their order-code details match the manufacturing plan; both retain the same identified memory, clock, and package characteristics. No cross-brand drop-in equivalent is substantiated because the combination of SSOP-20 pin compatibility, 1.8 V to 5.5 V operation, memory resources, and programming behavior is too restrictive to infer from generic 8-bit MCU specifications. Other tinyAVR 2 devices may support code migration, but devices with 14 or 24 pins are not drop-in replacements for a 20-pin PCB. Always validate the exact package drawing, pin table, temperature grade, and programming configuration before substitution.

代替品との比較

パラメータ この製品 ATTINY1626-SU ATTINY1626-SUR
Brand Microchip Technology Microchip Technology Microchip Technology
Package SSOP-20 SSOP-20 - same SSOP-20 - same
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz
Program Flash Memory 16 KB 16 KB 16 KB
SRAM 2 KB 2 KB 2 KB
EEPROM 256 bytes 256 bytes 256 bytes
Operating Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
ADC 12-bit differential ADC with Programmable Gain Amplifier 12-bit differential ADC with Programmable Gain Amplifier 12-bit differential ADC with Programmable Gain Amplifier
Order-Code Designation ATTINY1626-XF ATTINY1626-SU ATTINY1626-SUR

主な差別化要因

  • Retains the full ATTINY1626 performance profile in the verified SSOP-20 alternatives (vs ATTINY1626-SU)
  • Combines 20 MHz control with integrated differential analog acquisition (vs ATTINY1626-SUR)
  • Compact 20-pin SSOP implementation with industrial temperature capability (vs ATTINY1626-SU)

設計ノート

Use the manufacturer SSOP-20 land pattern and confirm the pin-1 orientation against the package drawing before fabrication. Place the MCU close to the local input, output, and decoupling connections so switching-node and analog-signal paths do not share vulnerable return segments. The operating range of 1.8 V to 5.5 V should be checked against every connected peripheral so an off-state input or pull network cannot force a pin beyond the device's limits.

Route the differential ADC inputs as a short, symmetric pair with a continuous ground reference beneath them, and keep switching regulators, high-current relays, and digital clock lines away from this region. If the analog source has a wide bandwidth, add source filtering that preserves the required measurement response while limiting high-frequency interference. Evaluate common-mode voltage and input range against DS40002234B before selecting the Programmable Gain Amplifier gain.

Provide local decoupling at the supply pins using the capacitance and placement specified in Microchip Technology data sheet DS40002234B. Keep the power path narrow enough to limit transient current in the loop while maintaining sufficient copper for the expected operating current. If the module runs from a battery or low-voltage source, verify startup, brownout, and sleep-mode behavior over the full source range rather than assuming a nominal voltage is sufficient.

Do not confuse the ATTINY1626-XF order code with another package or temperature-grade option until the package drawing and grade markings are checked. Firmware also must match the selected device's memory size, clock configuration, and pin assignments. A programmer configured for an ATmega328P or another ATtiny device can produce incorrect target signatures or timing. Run the device-specific clock and peripheral checks after programming, especially on a reused board.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The LCSC product listing identifies ATTINY1626-XF as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is shown for the exact part.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

attiny1626 datasheet attiny1626 microcontroller attiny1626 development board attiny1626 arduino attiny1626 programming ATTINY1626-XF datasheet ATTINY1626-XF datasheet pdf ATTINY1626-XF pinout ATTINY1626-XF equivalent ATTINY1626-XF replacement ATTINY1626-XF vs ATTINY1626-SUR ATTINY1626-XF SSOP20 ATTINY1626-XF price ATTINY1626-XF stock

関連部品&用語

Microchip Technology ATTINY1626-XF ATTINY1626-SU ATTINY1626-SUR ATTINY1626 ATtiny1624 ATtiny1627 AVR CPU tinyAVR 2 8-bit microcontroller embedded microcontroller microcontroller semiconductor hardware multiplier Event System 12-bit differential ADC Programmable Gain Amplifier Flash memory SRAM EEPROM SSOP-20 SSOP package family surface mount RoHS DS40002234B
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示