Microchip Technology

ATTINY261A-XU - 20MHz AVR MCU with 2KB Flash | Microchip

Référence : ATTINY261A-XU ✓ Actif
1.8 V to 5.5 V Vdss 20-pin TSSOP Package 20 MHz Speed 2 KB (1K x 16) Memory
MOQ : 1 |

ATTINY261A-XU Présentation

The Microchip Technology ATTINY261A-XU is a compact 8-bit AVR RISC microcontroller operating at up to 20 MHz, with 2 KB of flash memory, 128 B of SRAM, 128 B of EEPROM, and 16 general-purpose I/O lines in a 20-pin TSSOP package. Its operating supply range of 1.8 V to 5.5 V supports low-voltage battery-powered and conventional 5 V embedded systems.

A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, timers, and communication peripherals on one device. The ATTINY261A belongs to the ATtiny family, which sits within the broader hierarchy of AVR microcontrollers, embedded processors, and semiconductor control devices. Its small memory footprint is intended for compact embedded-control tasks rather than general-purpose computing.

The ATTINY261A combines 32 general-purpose working registers, an 8-bit timer/counter with compare modes, USI connectivity, and brown-out detection with power-on reset. The 2 KB flash capacity supports a bootloader or a focused control routine, while the 128 B SRAM and 128 B EEPROM provide working data and retained parameter storage. The 16 I/O pins can be assigned to digital inputs, outputs, and interrupt-capable functions according to the device pin configuration.

Microchip describes the ATTINY261A as a picoPower 8-bit AVR RISC-based device. Its reduced operating voltage range and low-power design are useful in compact consumer products, industrial controls, sensor nodes, and accessories where board area and energy use matter. The 20-pin TSSOP is surface mount and can be placed on automated production assemblies rather than through-hole breadboards.

Typical applications include simple motor or valve controllers, LED status indicators, keypads, battery-powered sensors, communication bridges, and compact embedded modules. In each case, the firmware must fit within 2 KB of flash, while the application should avoid relying on large buffers or storage-intensive libraries.

Design the decoupling network and programming connections according to the manufacturer datasheet. Keep the reset path stable, route sensitive communication lines away from switching edges, and confirm that the selected clock and peripheral configuration remain within the device electrical limits. Software should use the chip’s documented timer and USI resources rather than adding unnecessary external components.

This product page combines the exact ATTINY261A-XU electrical identity, verified package and memory details, migration context, direct-replacement information, and practical selection guidance to support PCB, firmware, and sourcing decisions.

Alternatives de remplacement direct pour ATTINY261A-XU — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

ATTINY261-20SU

✅ Remplacement direct
📦 20-pin TSSOP
Uses the earlier ATtiny261 generation; Microchip identifies the ATtiny261A as functionally identical, although electrical characteristics differ because the manufacturing process changed

📋 Alternative de référence (hors catalogue)

ATTINY261A-XU Valeurs maximales et caractéristiques électriques

Product Type 8-bit AVR RISC microcontroller
Maximum CPU Frequency 20 MHz
Flash Memory 2 KB (1K x 16)
EEPROM Memory 128 B
SRAM 128 B
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
Timer/Counter 8-bit with compare modes
Connectivity USI
Operating Voltage Range 1.8 V to 5.5 V
Nominal Supply Options 2.5 V, 3.3 V, and 5 V
Boîtier 20-pin TSSOP
Type de montage Surface mount
Industrial Temperature Grade Yes
Statut RoHS Compliant
Nombre de broches 20 pins

Guide de configuration des broches du ATTINY261A-XU 20-pin tssop

Configuration des broches du ATTINY261A-XU (boîtier 20-pin tssop). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 20-pin tssop pour le ATTINY261A-XU

Aucune donnée de brochage détaillée disponible pour ATTINY261A-XU.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

ATTINY261A-XU convient pour 6 applications: Battery-Powered Sensor Node, LED Status and Sequencer Controller, Motor and Valve Control, USI Serial Communication Bridge, Industrial Keypad and Panel Interface, Consumer Accessory Controller.

🔋

Battery-Powered Sensor Node

The ATTINY261A-XU fits a compact battery-powered sensor node because it combines a 20 MHz AVR core with a 1.8 V to 5.5 V operating range and only 16 I/O pins. The 2 KB flash limit suits compact acquisition and threshold-control routines rather than data logging or protocol-heavy firmware. Use the device to wake periodically, read a compatible sensor, apply filtering, and transmit a compact result. Its picoPower architecture helps support low-power operation, while brown-out detection and power-on reset protect operation near the lower supply limit. The engineer should budget the application against the device’s 128 B SRAM and 128 B EEPROM, keeping transient buffers and retained configuration within those constraints.

💡

LED Status and Sequencer Controller

The ATTINY261A-XU is suitable for LED sequencing, status indication, and simple lighting effects because its 16 general-purpose I/O lines provide ample digital outputs for compact panels. The 20 MHz AVR core provides ample timing headroom for debouncing, fades, blink patterns, and fault indicators without requiring a high-end processor. Firmware can use the 8-bit timer/counter with compare modes to create deterministic intervals, leaving the remaining I/O available for switches or interlocks. Because the device offers 2 KB of flash, the application should use compact lookup tables and avoid large animation libraries. A current-limiting resistor or regulated LED driver remains necessary for each channel, and the PCB should keep high-current switching paths separated from sensitive control traces.

🔧

Motor and Valve Control

The ATTINY261A-XU can serve as the logic controller for a small motor, solenoid, or valve when the design uses digital command signals rather than a high-power analog drive stage. Its 16 I/O pins allow control inputs, limit-state detection, and gate-control outputs, while the 8-bit timer/counter supports basic timing or pulse-width functions. The 20 MHz processing rate is adequate for deterministic supervisory logic and safety interlocks. Because the ATTINY261A-XU is not a high-current driver, an appropriately rated transistor, MOSFET, or driver stage must handle the load. Firmware should include startup and overtravel checks, and the layout should keep inductive transients and motor current paths away from the controller and its clock circuitry.

🌐

USI Serial Communication Bridge

The ATTINY261A-XU fits a small USI-based communication bridge because the MCU includes USI connectivity alongside an 8-bit AVR core and 16 I/O lines. It can translate between simple serial wiring and a higher-level product function when both sides use compatible electrical levels and protocol timing. The 20 MHz clock supports straightforward bit-banged or peripheral-assisted communication routines, while 128 B of SRAM constrains simultaneous buffering and protocol state. Firmware designers should select a protocol and framing strategy that fit 2 KB of flash, and the board should provide the required level translation and signal conditioning. Keep the USI route short, provide the documented pull resistors, and isolate slow-changing external signals from the oscillator and programming connections.

🏭

Industrial Keypad and Panel Interface

The ATTINY261A-XU is appropriate for a compact keypad, control panel, or front-panel interface because 16 I/O lines can support multiple keys, indicators, and interlocks while the 20 MHz AVR core handles debouncing and menu logic. Its 128 B EEPROM can retain calibration values, panel configuration, or user preferences, and the 2 KB flash supports a focused state machine. The surface-mount TSSOP package is suitable for compact production assemblies and automated testing. A practical design should debounce contacts in firmware, define safe behavior for invalid or simultaneous inputs, and use the power-on-reset and brown-out features to establish a known startup state. The panel layout should maintain clean ground return paths and separate switch wiring from sensitive timing or communication traces.

📱

Consumer Accessory Controller

The ATTINY261A-XU works well in a small consumer accessory that coordinates buttons, indicators, a simple sensor, and a low-speed serial link. Its 20-pin TSSOP footprint reduces board area, while the 1.8 V to 5.5 V supply range allows use with common regulated rails and compatible battery systems. The 2 KB flash and 128 B SRAM are adequate when the accessory performs a narrow, well-defined function rather than running a graphical interface or complex connectivity stack. Firmware can use EEPROM for small persistent settings and the timer/counter for blinking or periodic tasks. The product should define safe pin states during reset and power loss, and the implementation should validate every actuator state before enabling it to avoid unintended motion, illumination, or audible output.

What is the ATTINY261A-XU?
The ATTINY261A-XU is a Microchip Technology 8-bit AVR RISC microcontroller with a 20 MHz maximum clock, 2 KB of flash memory, 128 B of SRAM, 128 B of EEPROM, and 16 general-purpose I/O lines. According to the Microchip ATtiny261A product page, it uses the AVR architecture and picoPower technology in a compact 20-pin TSSOP package.
What are the key specifications of ATTINY261A-XU that engineers should know?
The ATTINY261A-XU combines a 20 MHz 8-bit AVR core, 2 KB flash, 128 B SRAM, 128 B EEPROM, and 16 I/O pins in a 20-pin TSSOP. Microchip also identifies an 8-bit timer/counter with compare modes, USI connectivity, brown-out detection, and power-on reset. These figures define it as a compact controller for embedded products rather than a high-memory application processor.
Where can I download the ATTINY261A-XU datasheet PDF?
The manufacturer datasheet and product resources are available from the Microchip ATtiny261A product page at https://www.microchip.com/en-us/product/ATtiny261A. Search the page for the ATtiny261A data sheet and pin-definition resources, then confirm that the ordering table includes the ATTINY261A-XU 20-pin TSSOP configuration before assigning the document to a released design.
Where can I find the ATTINY261A pinout?
The ATTINY261A pinout is published in the manufacturer data sheet and pin-description resources for the 20-pin TSSOP package. The ATTINY261A-XU exposes 16 general-purpose I/O lines, along with power, ground, reset, clock, programming, and peripheral functions. Use the pin-description table when assigning PCB nets rather than relying solely on the package drawing.
What is the difference between ATTINY261A-XU and ATTINY261A-XUR?
Both ATTINY261A-XU and ATTINY261A-XUR identify the same 20-pin TSSOP ATtiny261A device, but the order codes refer to different delivery formats. The ATTINY261A-XU is listed in a tube format, while ATTINY261A-XUR is associated with tape-and-reel packaging. Their electrical function is the same; use the original mechanical and ordering suffix for an exact BOM match.
Can ATTINY261-20SU replace ATTINY261A-XU?
The ATTINY261-20SU is the closest documented predecessor path, but migration must account for the change from the original ATtiny261 to the ATtiny261A. Microchip application note AVR531 describes the ATtiny261A family as functionally identical and a drop-in replacement for ATtiny261, ATtiny461, and ATtiny861. Because the two devices use different manufacturing processes, verify current electrical characteristics and qualification requirements.
What is the best drop-in replacement for ATTINY261A-XU?
The best direct drop-in path is the original ATtiny261 in the corresponding 20-pin TSSOP configuration, subject to current electrical-characteristic review. Microchip’s AVR531 migration note identifies the ATtiny261A family as functionally identical to the earlier devices. No cross-manufacturer replacement is established here because pin compatibility, firmware behavior, and peripheral mapping must all match the original ATtiny261A-XU.
Is ATTINY261A-XU suitable for a battery-powered sensor node?
Yes, the ATTINY261A-XU is suitable for a low-power sensor node when its 2 KB flash and 128 B SRAM are sufficient for the firmware. Its 1.8 V to 5.5 V operating range supports multiple battery and regulated-rail configurations. Use the manufacturer’s sleep-mode, reset, and power-measurement guidance to calculate the actual duty-cycled operating budget.
ATTINY261A-XU vs ATTINY861A-XUR: which is better for a compact controller?
Choose ATTINY261A-XU when 2 KB of flash and 128 B of SRAM are sufficient, and choose ATTINY861A-XUR when the design needs 8 KB of flash. Both use the AVR architecture, operate at 20 MHz, and are offered in a 20-pin TSSOP format. The ATtiny861A provides four times the program memory but is not a like-for-like memory equivalent, so firmware and pin assignment still require review.
When should I choose ATTINY261A-XU over ATINY861A-XUR?
Choose ATTINY261A-XU when the application fits within 2 KB of flash and benefits from the smaller ATtiny261A resource footprint. Select ATTINY861A-XUR when program size, buffering, or future feature growth requires substantially more memory. Both share a 20-pin TSSOP format and 20 MHz class performance, so memory capacity is usually the decisive functional difference.
Is ATTINY261A-XU the same as ATTINY861A-XU?
No. ATTINY261A-XU has 2 KB of flash and 128 B of SRAM, while ATTINY861A-XU has 8 KB of flash and is listed as a 20-pin TSSOP AVR microcontroller. Although the devices share the family, core speed, and package format, the larger memory configuration can change firmware size and application suitability.
Where can I buy ATTINY261A-XU online?
Use the Request a Quote form on this page to request ATTINY261A-XU availability, order quantities, and current commercial terms. The exact target is identified as a 2 KB-flash, 20 MHz, 20-pin TSSOP Microchip device, and the form allows procurement staff to confirm the correct XU suffix and delivery format before placing an order.
What is the price of ATTINY261A-XU?
Current commercial pricing for ATTINY261A-XU should be requested through the Request a Quote form on this page. The structured price area on the product page reflects current sourcing conditions and avoids presenting a stale unit price as an availability commitment. Submit the required quantity, packaging preference, and target date with the request.
What is the lead time for ATTINY261A-XU?
The current lead time and minimum order quantity for ATTINY261A-XU should be confirmed through the Request a Quote form on this page. Include the required quantity, shipment destination, and whether a tube format is acceptable. This keeps the procurement response tied to the exact ATTINY261A-XU order code rather than a broader ATtiny family.
Is ATTINY261A-XU in stock?
Use the Request a Quote form on this page to check current ATTINY261A-XU availability for the quantity you need. Availability can vary with order size, package delivery format, and production scheduling, so a listing-level stock indication should not be treated as a firm allocation. State the required quantity and schedule in the request.
What programming tools are compatible with ATTINY261A-XU?
The ATTINY261A-XU is programmed through the programming interface and fuse configuration defined in the Microchip ATtiny261A documentation. Use a programmer and toolchain compatible with the AVR device family and the exact data-sheet programming procedure. Because the individual programming interface and supported tool versions are not stated on this page, confirm them in the current manufacturer documentation.

Données de référence d'ingénierie pour ATTINY261A-XU — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose ATTINY261A-XU when the design needs a 20 MHz 8-bit AVR controller, 16 I/O lines, and a compact 20-pin TSSOP footprint, while fitting comfortably within 2 KB of flash, 128 B of SRAM, and 128 B of EEPROM. It is particularly suitable for compact sensor nodes, panel interfaces, LED controllers, and small consumer accessories. Consider ATTINY861A-XUR when the firmware requires up to 8 KB of flash or substantially greater application headroom, accepting that it is not a memory-equivalent part. ATTINY861V-10SU is an option when 10 MHz performance is sufficient and lower clock-related activity is desirable. For a legacy ATTINY261-20SU board, the ATtiny261A family provides a documented functional migration path, but engineers should compare current electrical characteristics and qualification requirements before production release.

Comparaison avec les alternatives

Paramètre Ce produit ATTINY261-20SU
Brand Microchip Technology Microchip Technology
Package 20-pin TSSOP 20-pin TSSOP
CPU Architecture 8-bit AVR RISC 8-bit AVR RISC
Flash Memory 2 KB 2 KB

Principaux différenciateurs

  • Compact memory footprint (vs ATTINY861A-XUR)
  • 20 MHz performance in a small package (vs ATTINY861V-10SU)
  • Documented migration path from the earlier generation (vs ATTINY261-20SU)

Notes de conception

Confirm the complete power budget at the device pins before finalizing the rail. The ATTINY261A-XU supports a 1.8 V to 5.5 V range, but the usable current depends on clock speed, active peripherals, I/O loading, and operating mode. Place the manufacturer-recommended bypass capacitors close to the supply and ground pins, keep return-current paths short, and size the upstream regulator for peak—not merely average—load.

Follow the ATtiny261A 20-pin TSSOP land pattern and pin-description table when assigning nets. Keep the programming interface accessible for production programming and leave perimeter clearance for the device body and leads. Route clock-capable and communication signals away from switching nodes and noisy power wiring. A compact ground plane beneath the device can improve return-path continuity, but follow the exact package drawing rather than estimating pad geometry.

Do not design around the memory limits of ATTINY261A-XU as though it were a larger ATtiny device. Its 2 KB flash, 128 B SRAM, and 128 B EEPROM constrain code size, buffers, and retained configuration. Test startup behavior after reset, validate all external inputs before driving actuators, and account for brown-out conditions near the minimum supply voltage. When migrating from ATTINY261, review electrical-characteristic differences caused by the changed manufacturing process.

Keep sensitive analog or communication front ends away from switching-power loops and relay or motor transients. Provide a direct, low-impedance return from decoupling capacitors to the ground pins. For USI-based interfaces, minimize trace length and use only the bias or termination values specified by the interface design. The 20 MHz clock capability should not be treated as a requirement; using a lower permitted clock can reduce switching activity when the application timing permits it.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The ATTINY261A-XU comparison record identifies the device as RoHS compliant. The industrial-temperature designation does not by itself establish AEC-Q100 qualification.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

attiny261a datasheet attiny261a pinout attiny261a su datasheet ATTINY261A-XU datasheet pdf ATTINY261A-XU pinout ATTINY261A-XU footprint ATTINY261A-XU equivalent ATTINY261A-XU replacement ATTINY261A-XU vs ATTINY861A-XUR Microchip ATTINY261A-XU ATTINY261A-XU price ATTINY261A-XU stock ATTINY261A-XU application circuit ATTINY261A-XU programming

Composants & termes associés

Microchip Technology ATTINY261A-XU ATTINY261A ATTINY261-20SU ATTINY861A-XUR ATTINY861V-10SU AVR 8-bit AVR RISC microcontroller microcontroller embedded processor semiconductor picoPower USI 20-pin TSSOP TSSOP package family surface mount SMD RoHS 20 MHz clock 2 KB flash memory 128 B SRAM 128 B EEPROM brown-out detection power-on reset
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ